SPL REPAIR TO BLDG NO P-17, POLYCLINIC DIPATOLI UNDER FD HOSPITAL, SPL REPAIRS TO SUNKEN FLOOR, ROOF TREATMENT AND DOOR REPLACEMENT IN BLDG NO P-443 (1 TO 8) OR MD ACCN OF FD WKSP COY (EME BN) AND SPL REPAIR/ REPLACEMENT OF LIGHTENING PROTECTION SYST

Amount

Demolition of brick work built in cement mortar or lime mortar complete of any description all as specified and directed.complete all as specified

M/L Brick work with subclass ‘B’ bricks modular type, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc.complete all as specified.

M & L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces fair faces of brick work/concrete and finished the surface fair and even complete as specified and directed

M & L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces other than fair faces of brick work/concrete/ and finished the surface fair and even complete as specified and directed

M & L for rendering 10 mm thick in cement Mortar (1:4) on the surfaces of ceiliing and finished the surface fair and even complete as specified and directed

Complete removal of existing treatment on wall surfaces complete all as specified.

M/L preparation of newly / old plastered surfaces of wall and applying a coat of wall care putty 3 mm thick to make the surfaces truly smooth complete all as specified.

M &L for applying two coats of distemper oil emulsion over a coat of primer white or tinted on already prepared wall surfaces (or necessary preparation if required ) complete all as specified and directed.

M &L for applying one coats of distemper oil emulsion on old surfaces of wall / Ceiling including necessary preparation of surfaces complete all as specified and directed.

M&L preparation of old plastered surfaces and applying two coats of white wash on wall surfaces complete all as specified and directed.

M &L for preparation of newly plastered surface and applying two coats of white wash on ceiling surfaces complete all as specified and directed.

M &L for preparation of old plastered surface and applying one coat of white wash on ceiling surfaces complete all as specified and directed.

M &L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed.

M &L for preparation of old plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beding layer all as complete as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm / 450X 350X 7mm thick over10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

Demolition of cement concrete (un reinforced) of any description incl. floor tile and in any position not otherwise complete as specified and directed.

Demolition of brick bats laid dry including returning filling spreading, levelling, watering and well ramming in layer in sunken floors. complete as specified and directed

S&F in repaire Vitreous china white wash down water closet (Pedestal pattern) including connection to drain ( or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap. complete as specified and directed

Supply only plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or anodised hinging device complete as specified and directed

Supply only PVC valveless syphonic action type low level flushing cistern 10 Ltr. Capacity of approved incl flush pipe of 32mm bore make all as specified and directed

S&F in repairs. vitreous china wash basin, white flat back size 550x400mm (excluding taps), incl.CP waste coupling & PVC waste pipe and brackets

S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed.

Taking up or down steel tubing and connection of 15 dia bore.

Taking up or down steel tubing and connection of 20 dia bore.

Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth. complete as specified and directed

M&L 15mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor complete as specified and directed

Refixing old steel tubing and connections in new or old position 15mm dia complete as specified and directed

M&L 20mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor complete as specified and directed

Refixing old steel tubing and connections in new or old position 20mm dia complete as specified and directed

S&F in repair stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore. complete as specified and directed

S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore. complete as specified and directed

S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore. complete as specified and directed

S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia bore for mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe complete as specified and directed

S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete as specified and directed

S&F in repair Brass chromium plated tubular towel rail 20mm dia,D type, 60 cm long between flanges. complete as specified and directed

Dismantalling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. complete all as specified

S&F as in repair water tank cover for 500/1000 Ltrs capacity suitable for PVC tank complete as specified and directed

Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) n exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm Sqm each complete all as specified and directed.

Taking down shutters area exc 1.0 Sqm but n.exc 2.0 sqm each complete as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing

M/L 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed.

S&F factory made 35 mm thick plain framed, panelled shutter (any number of panels) with panels of timber flat on both side (fether edged), or veneered particle board medium density, wood particle board with commercial face veneers: supply and fitted to chowkats complete all as specified and directed.

S & F Powder coated aluminium door frame of approved manufacturer using approval aluminium section of following sizes fixed to floor, wall with rawl plug and screwe, etc, complete all as specified and as directed. (a) Door frame of size 95.25mm x 44.45mm x 1.5mm

S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed.

M&L for 30mm width of flap MS piano hinges complete as directed at site

S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed

S&F Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F for 300 mm mild steel helical spring including roller and roller plate, complete all as specified and directed

S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size all as specified

S/F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) complete as specified and directed

S/F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm) complete as specified and directed

S&F in repairs Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed

S&F in repair Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290.

S&F in repair Galvanized Mild steel wire cloth 0.46 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel stapes, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or desereption) from wooden/Steel frames. complete as specified and directed

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pan including glazing pins where required. complete as specified and directed

S&F 3.00mm thick pin head, figured glass and glasing with oil putty in Squres/Ractangle n.exc 0.5 Sqm in each paneincluding glazing pins where required. complete as specified and directed

M/L cement concrete type B1,1:2:4 (20 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified

M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth complete as specified and directed

M&L one coat of synthetic enamel paints on old steel surfaces over 10cm width or girth after necessary preperation of old surfaces. complete as specified and directed

M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primer over 10cm width or girth complete as specified and directed

M & L for preparation of old painted surface of wood over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.

S/F in repairs decorative curtain rod made out of 25 mm dia (outer dia) MS pipe having wall thichness 0.63 mm, PVC coated of any coulor and pattern as approved overall dia 28 to 29 mm, including provn of two nos brackats on each ends and provn of two nos of globe on each ends for each window/door for fixing complete all as specified and directed.

S/F in repairs curtain rails 20 mm dia, mild steel, chromium plated including with fixing brackets, stops, rollers etc for cub board. complete as specified and directed

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl waste coupling & waste pipe. complete as specified and directed

M&L for water proofing treatment to sunken surface of floor slab/skirting/ dome in following sequence:- (a) Laying plain cement concrete padding 1:2:4 Type B0 (using 12.50mm graded stone aggregate) with integral water proofing compound (note- integral water proofing compound shall be measured in supply only ).

(b) floor / vertacal skirting side plaster in CM 1:3, 15mm thick with with integral water proofing compound as per manufacturer instruction and 72 Hrs tesing for water tightness by ponding of water.

(c) Applications of two coats of proof coat or equivalent as per manufacturers instructions all over and testing again for water tightness by ponding of water for 72 Hrs.

Demolition of cement concrete(un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and as directed

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in sunken portion and making adequate slope toward spout pipe complete all as specified and as directed.

M&L for rendering 15 mm thick on concrete or brick surface in CM (1:3) mixed with WPC as per manufacturer instructions and finishes surfaces even and smooth with out using extra cement.Note - WPC will be measured and paid separtely

M&L for applying two coats evenly a tack coat of hot air blown bitumen of grade 85/25 @ 1.50 Kg per sqm per coat including cleaning of surface over polythene film complete all as specified and as directed

M&L for polythene film black 200 micron thick laid in floor, vertical surface etc complete all as specified and directed.

Supply only liquid water proofing compound.

M&L Cement concrete, Type E2- 1:5:10(40mm graded aggreated in foundations, filling and mass concrete in sunken portion of IWC and bathroom

S&F in repair vitreous china squatting pan , Orissa pattern size 580 x 440 mm white, with integral foot rest including connection to trap, and to flush pipe, anti-syphonage etc

S&F in repair 10 ltr capacity PVC Valveless ,syphonic action type , flushing cistern , low level , white with inlet ball valve, float and handle including brackets including flush pipe 32mm polythylene of low or high density of PVC 32mm dia for low level cistern and all needed componantes supplied and fixed all as specified and directed .

M & L Non Skid ceramic colour ceramic tiles,7 to 8mm thick square/rectangular area of each tile 0.06sqm but not exceeding 0.11sqm ,in floors over and including 15mm thick screed bed in CM(1:6),set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface coloured cement to match the floor complete all as specified and as directed

S&F in repair PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and as directed

Roof treatment for approachable roof including complete removal of existing roof treatment :- (i) Rendering 10mm thick in cement mortor (1:3) mixed with liquid water proofing compound finished the surface fair and even.(ii) Applying evenly a coat of bitumen primer @ 0.30 Kg/Sqm. (iii)Applying APP modified polymeric membrane over the bitumen coat surface ,weight not less than 3.2-3.5 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. (iv) A coat of hot blown bitumen @ 1.2 Kg/ Sqm shall be applied over polymeric membrane and blinded with clean dry sand at the rate of 0.5 Kg per Sqm.

M&L for coloured glazed ceramic tiles in vertical surface 350mmx250mmx7mm thick over and including10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L 22 mm thick machine pressed cement concrete tiles with grey cement without pigment of size 250 mm x 250 mm laid in neat cement slurry over and including 15 mm thick bed screed in CM 1:4 mixed with chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD 200 milli - litre mixed with 50 Kg of cement or STP No 1 (LIQUID) of STP LTD in proportion 200 milli litre per 50 Kg cement,as per manufactures instructions and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of DR FIXIT of PIDILITE INDUSTRIES LTD or TILE GLUE of STP LTD as per manufactures instructions complete all as specified and directed

Roof treatment for non approachable roof including complete removal of existing roof treatment :- (i) Rendering 10mm thick in cement mortor (1:3) mixed with liquid water proofing compound finished the surface fair and even.(ii) Applying evenly a coat of bitumen primer @ 0.30 Kg/Sqm. (iii)Applying APP modified polymeric membrane over the bitumen coat surface ,weight not less than 3.20-3.50 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. (iv) Applying two coats of aluminium paint @ 200 gm/sqm over polymeric membrene.

Taking down eaves gutters and rain water pipes (any size or patterns) including all fittings,heads,shoes,bends,swan-necks etc complete all as specified and as directed

M&L 5mm thick in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed

S&F PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed

S&F PVC(SWR) bends any radius 110 mm dia complete all as specified and as directed

S&F PVC(SWR) pipe 75mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp complete all as specified and as directed

S&F PVC(SWR) bends any radius 75 mm dia complete all as specified and as directed

S&F in repair PVC(SWR) floor trap 75mm dia plain with grating incl jointing with solvent cement complete all as specified and as directed

M&L for Preparing surfaces plastered on new surface of wall and applying two coats of cement paint over one coat of cement base primer complete all as specified and as directed

Complete removal of existing treatment and preparing the surface of walls and apply two coat of cement base paint over a coat of cement primer complete all as specified and directed

M&L for preparation of new surfaces and applying Three coat of white wash on wall including cornices etc complete all as specified and directed

M&L for preparation of new surfaces and applying three coat of white wash on ceiling including cornices etc complete all as specified and directed

M&L for preparation of old surfaces and applying one coat of white wash on wall including cornices etc complete all as specified and directed

ditto all as per item No 36 but fixing 15mm bore only tubes, any grade, to walls and ceilings or laying in floors.

ditto all as per item No 38 but fixing 20mm bore only tubes, any grade, to walls and ceilings or laying in floors

S&F in repair Bib taps ,15 mm bore,chromium plated fancy type with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed

S&F in repair brass chromium plated shower rose 125mm size complete all as specified and as directed

S & F in repair Tubular towel rail, 20mm dia, D type, 60 cm long between flanges CP brass.complete all as specified and as directed

S&F in repair Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair 15mm dia stop valve fancy type chromium plated concealed type, screwed down high pressur, with crutch or butterfly handle, screwed both hands for iron pipe or for unions.

Dismantling water tanks and removing exc 250 & nexc 500 ltrs capecity complete all as specified and as directed

S&F PVC rotational moulded polythylene water storage tanks 500 litres capacity incl cover etc complete all as specified and as directed

S&F pressed steel frames of size 125 x 60 mmx1.25mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed

S&F 35mm Flush shutters(ISI Marked) solid core construction, with block board core and plywood, commercial type on both sides complete all as specified and as directed

S&F 35mm thick glazed and skeletion shutters 2nd class hardwood without sash bars complete all as specified and as directed

S&F GI mild steel wire cloth 0.56 nominal dia wire and average width aperture 1.18mm and fixed with pinned tack or galvanized staples complete all as specified and as directed

S & F 200mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F small fitting shaped door and window stops n'exc 200 cu cm each of 2nd class hard wood complete all as specified and as directed

S&F 50mm Butt hings medium weight cold rolled and mild steel complete all as specified and as directed

S&F Powder coated aluminium frame for windows with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S& F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Sheet glass,4.mm ordinary quality and glazing with in square n exc 0.5 sq. m in each pane

S&F air termination single pointed aluminium rod 12 mm dia 300 mm long with suitable nut, bolts, screws, washers & complete all as specified by Eng-in-Charge.

S&F of GI Strip ISI marked of size 32 x6 mm complete with nuts, bolts and washers,buried in ground including excavation complete all as specified and directed

S&F porcelain insulators of size 75 mm height and 25 mm width for fixing of aluminium and GI strip with suitable nut, bolts and washers complete all as specified and directed.

S&F bakelite insulator sheet of size 100 mm x 100 mm x 12 mm thick for fixing of air termination with suitable nut, bolts and washers complete all as specified and directed

S&F of medium grade GI tubing 40 mm bore for fixing of air termination single pointed aluminium rod with necessary clamps, nuts, bolts and washers including silver painting over the surfaces of all rusted metallic surfaces complete all as specified and directed.

M&L for test point terminal block made of gun metal or phosphores bronze size 75x75x25mm, drilled and screwed including 3 Nos, 8 mm dia 25 mm long hex head screw complete all as specified and directed.

Material and labour for earthing complete copper plate 30 cm x 30 cm x 3 mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level connected to copper strip of size 25 mm x 3 mm by means of bolts, nuts check nuts and washers, with copper strip up to 7.5 mtr, excavation and earth work filling of charcoal and salt mixture 150 mm all around the plate watering arrangement with 20 mm GI medium grade pipe including PCC pit with cover, funnel and wire mesh complete all as shown in electrical plate No. 3 of MES Sch Part - 1 specified and directed.

Copper strip 32x6 mm with saddles and fixing screws etc for roof conductors and down conductors above ground or in ground.

10 M & L for PCC (1:3:6) type C1 using 20mm graded stone aggregate complete with necessary use and waste of form work complete all as specified.

M&L for advance maintenance free chemical earthing with JMV CBE 403 environment friendly ring earthing system consisting 10 (ten) feet length 40 mm dia earth electrode made out by copper, maintenance free electrolytic grade copper earthing system of JMV make based on flat in pipe technology of 3 Mtrs length, 40 mm dia with crystalite conductive mixture COMPOUND filled with the permanent sealing at the top & bottom with the lead terminal to be lowered in 150 mm dia bore including filling of back fill ecofriendly earth enhancing compound tested by ROHS comply to IEC 62651-7 which should have passed leaching ,corrosion, supphur & resistivity test as per IEC 62651-7 by NABL accredit LAB/JAM plus compound in 150 mm bore in immediate contract around the earth electrode and top of the bore shall be finished with 40 mm thick PCC in 1:2:4 type B 1 over 75 mm thick PCC in 1:4:8 type D-2 and back filly/ JAM compound shall be covered with FRP pit cover of suitable size for each earth electrode , joint to be made by JAM weld exothermically welded technology including copper strip size 32 x 6 mm for earthing ring system and copper strip 32x6 mm size for earthing electrode to test point with saddles & porcelain insulators suitable size on wall ,earth strip protected by light grade GI pipe 40 mm dia in case of plinth protection / floor/ hard standing crossing complete all as specified and directed. Note :- Earth work, PCC work, PCC cutting work by cutter, earth chamber in suitable size with testing on suitable value etc rate shall deemed to be included in quoted rate.

Supply only single core copper conductor PVC insulated unsheathed 70 Sqmm size,multistranded unsheathed complete all as specified and as directed.

Supply and fixing in replacement 15 mm bore GI pipe medium grade ISI marked as per IS:1239 with all new GI fittings, laid in trenches in old/new position complete all as specified and as directed.

S & F in replacement to plug type bib taps, cast iron, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and directed.

M&L in replacement for earthing complete with galvanised earth plate electrode 600 x 600 x 3.15 mm buried directly in ground vertical to a depth not less then 2.25 mtr below ground level with the top edge of earth plate at a depth of not less then 1.5 mtr below normal ground level using GI earth strip in size 32 x6 mm connecting to test point by means of nuts bolts and washers etc. made including necessary excavation earth work PCC (1:3:6) type C1 using 20 mm graded stone aggregate earth chamber 40 mm thick RCC cover with PCC (1:2:4) type B1 using 20 mm graded stone aggregate, 20 mm dia GI pipe medium grade for watering pipe and 40 mm dia GI pipe medium grade for strip protection, funnel, protection pipe, adequate quantity of common salt, charcoal etc. and connecting, testing etc complete all as shown in electrical plate No. 3 of MES Sch Part - 1 complete all specified and directed. Note : Quoted rate shall be including cost of RCC pit with cover, excavation, earth work all & upto 7.5m length of GI earth strip in size 32 x6 mm & GI pipe (ii) Cost shall be paid after getting specific value on testing (iii) Quoted rate shall be including cost of dismatling of old earthing.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) for plinth block/Collar above GL 150 mm high of size 150 mm x 150 mm and including form work finished even and smooth with using extra cement complete all as specified and directed.

M&L for providing PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) in foundation, filling and mass concrete of size 150mmx150mm cross section, planting depth 0.30mts for concrete incasing the pole complete all as specified and as directed.

M/S OMANIA ENTERPRISES