Providing electrical installation at Kashimira RDLU , MTNL, Mumbai ( Vacating existing LT panel room)

Primary Point Wiring with Modular Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. b) Surface/Recessed PVC conduit

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required.

a) 4 way TPN double door

b) 125 A Four pole MCCB(25KA) with enclosure

S/F of 6A to 32A rating 240/415V ,10 KA,"C" curve MCB suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. as reqd

a) 6 to 32 amp SP

c) 63 A 4P MCB

Supplying of following size XLPE Copper Conductor armoured cable of 1.1 KV grade as per specification complete as reqd.

a) 4x10 Sq mm

b) 4x16 Sq mm

Supplying & Making end terminations with brass compression Gland & heavy duty copper crimping lugs for following size XLPE armoured cable of 1.1 KV grade etc complete as reqd.

a) 4x10 Sq mm

b) 4x16 Sq mm

c) 3.5x95 sq.mm

Supplying of following size XLPE Al Conductor armoured cable of 1.1 KV grade as per specification complete as reqd.

a) 3.5x70 Sq mm

Supplying & Making end terminations with brass compression Gland & heavy duty Al crimping lugs for following size XLPE armoured cable of 1.1 KV grade etc complete as reqd. a) 3.5x70 Sq mm

Supplying and drawing following size single core 1.1 KV grade copper conductor industrial cable in the existing surface/ recessed steel/ PVC conduit as required. as required a) 1x25 Sq mm

Supplying and crimping following size single core 1.1 KV grade copper conductor industrial cable with heavy duty copper crimping lugs i/c connection etc. as required a) 1x25 Sq mm

Laying & Fixing following size XLPE /PVC insulated & PVC sheathed 1.1 KV Grade multi core power cables on surface / cable tray with fixing hardware like spacers, saddles, clamps, screw etc. complete as per CPWD specification & as reqd.

a) upto 25 sq mm (clamped with 1mm thick saddle)

b) upto 70 sq.mm

Supplying Decorative LED box type fittings with BLUE coloured end cap pre wired for LED tube and LED tubular lamp including testing etc as required. Make Crompton/Wipro/Phillips/Syska 20 watts LT8-20 (PC body) & DMLN1LT8-16 or equivalent

S/ F following capacity FN type TPN switch fuse unit with HRC fuses in sheet steel enclosure complete as reqd. a) 125 Amps

SITC of 100A TPN bus bar i/c 4 no copper bus bar, insulators, nut bolts, washers in 16 gauge powder coated MS box etc complete as required.

Providing and fixing 25mm x 5mm thick GI strip on surface or in recess for connections as per specifications etc. complete reqd.

S/L of following size of Cu/GI bare earth wire along with the cables/conduits/panels for loop earthing i/c lugging, crimping as per specifications etc. complete as reqd.

a) 8 Gauge GI wire

b) 2.24 mm dia Copper wire

Dismantling of various sizes of cables, LT panels, TPNDB , Trays etc & kept in Dahisar TE Bldg i/c transportation & relaying of existing cables etc complete as pre site requirement

bindal electricals & engineers