SPECIAL REPAIR INCLUDING PERIODICAL SERVICES AND PAINTING OF PRIMARY BLOCK, MAIN BLOCK (GF) AND FIRST FLOOR OF MAIN BLOCK KV AT HQTC BANGALORE

Amount

M&L for 2coats of Distempering wall with distemper oil emulsion white or tinted through mechanical means over a coat of 1mm thick wall care putty, including preparation of old surface after complete removal of existing treatment all as specified.

M&L for preparation of old decorated surface of ceiling including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion through mechanical means on ceiling complete.

Preparation of old painted wall surface of any description not otherwise described on brick, stone, concrete, asbestos cement or plaster surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.

Preparation of old painted surface of any description not otherwise described wood and wood based surfaces over 10 cm width of girth and applying one coat of synthetic enamel paint.

Preparation of old painted surface of any description not otherwise described steel and iron surface over 10 cm width or girth and applying one coat of synthetic enamel paint.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats.

M & L preparation of old decorated surface of wall including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of cement based paint through mechanical means on wall.

Taking down cement or cement lime plaster, any description on brick or stone walls, RCC slab etc. including removing peeled off concrete wherever necessary, including racking out joints, hacking for key, scrubbing down with water, etc. all as specified.

M&L for Rendering 10mm thick on fair faces of brick works or concrete surfaces in CM 1:6 and finished even and smooth without using extra cement all as specified.

M&L for 2coats of Distempering wall with distemper oil emulsion white or tinted through mechanical means over a coat of 1mm thick wall care putty, including preparation of new surface all as specified.

Rendering 5mm thick cement plaster in cement morter 1:3, on concrete sufaces as in ceiling, finished even and smooth without using extra cement.

M&L for preparation of new surface as in ceiling and applying two coats of distemper oil emulsion through mechanical means over a coat of chalk whiting complete.

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Cutting/chipping the spalling of wall & concrete surface and trimming & cleaning the surface to receive plastering all as specified and directed including all necessary form work & scaffolding and safety measures and lowering down the demolished material for disposal and disposing the demolition material as per direction by Engr in Charge.

Supply only wire netting of galvanised steel wire, 0.91 mm dia size of mesh 25mm complete all as specified and directed.

M&L for chipping of spalled and loose concrete and cleaning rust from re-inforcement by sand brushing scrubing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as antirust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy FOSROC and NITOBOND adehessive on complete exposed surfaces of concrete and provide guniting in two layers over steel welded mesh 1.4 mm dia of wire and total aperture 25 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1:3 cement mixed with polycrete admixture @ 2 % by weight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper Geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffolding ,shuttering necessary chased to brick work or RCC members at any height upto 3 storey buildings incl removing of small trees shrubs etc all as specified(Note: steel welded mesh to be welded with the existing reinforcement. The cost of welded mesh is to be welded with the existing re-inforcement is deemed to be included in the quoted rate complete all as specified and directed.

Resecuring or easing & adjusting steel window without taking down Shutters of any description complete all as specified.

Welding in repairs n. exc 2.5cm in length, n.exc 6mm thickness of metal to be welded. complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones

M& L for applying evenly a coat of blown industrial bitumen of grade 85/25 or 90/15 applied hot to concrete, wall surfaces at the rate of 1.2 kg per sq.m or as required including cleaning surfaces all as directed by Engr-in-Charge

S&F sheet glass, of 4mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane.

S&F sheet glass, of 4mm thick ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane.

S&F sheet glass, of 4mm thick ordinary quality, ground or obscured or frosted, on one side in square n.exc 0.5 Sqm in each pane.

OM ENTERPRISES

chowdeshwariconstructionco

ASCEND INFRA