IMPROVEMENT OF WATER SUPPLY SYSTEM OF N1 AREA AND PROVN OF ANTI SUICIDE FAN RODS FOR CEILING FAN AT SMQ AREA AT AF STATION KANPUR

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out for taking out/laying pipes in soft/loose soil complete all as specified and directed.

Returning, filling,including spreading levelling watering and well ramming in layers not exceeding 25cm thick in soft/loose soil after pipes are laid complete all as specified and directed.

Removing of excavated material not exc 50 m distance and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L for cutting of PCC/Hard standing/WBM road for passing of GI/CI/DI pipes complete all as specified and directed. Note : Making good with PCC shall be measured and paid separetely under respective item.

M&L for cement concrete 1:2:4 Type B1 using 20 mm graded crushed stone aggregate complete all as specified and directed.

M&L for PCC 1:2:4 Type B2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for making horizontal boring not exceeding 1.00 m deep in any type of soil below road crossing / hard standing / culvert / nala of suitable for protection pipe upto 200 mm complete all as specified and directed.

M&L for centrifugally cast (spun) ductile iron pressure pipes 100 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K7 including rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed. Make Electrosteel/Jindal/Tata/Jai Balaji

M&L for centrifugally cast (spun) ductile iron pressure pipes 150 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K-9 including rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed. Make Electrosteel/Jindal/Tata/Jai Balaji

M&L for centrifugally cast (spun) ductile iron pressure pipes 200 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K-9 including rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed. Make Electrosteel/Jindal/Tata/Jai Balaji

Taking up/ down of 15 mm bore steel tubing and connections from excavated trenches and building up to tripple storey with due care including removal from site complete all as specified and directed.

All as per item No 11.00 above but size 20 mm bore

All as per item No 11.00 above but size 25 mm bore

All as per item No 11.00 above but size 40 mm bore

All as per item No 11.00 above but size 50 mm bore

Re-fixing old steel tubing and connection in new or old position in trenches/wall/ ceiling/ floors etc with using new fittings of sizes 15 mm bore complete all as specified and directed.

All as per item No 16.00 above but size 20 mm bore

All as per item No 16.00 above but size 25 mm bore

All as per item No 16.00 above but size 40 mm bore

All as per item No 16.00 above but size 50 mm bore

S&F for GI pipe medium grade ISI marked with all necessary fittings laid in trenches / floor /wall or cealing of size 15 mm bore complete all as specified and directed. Make : Jindal/Tata/Prakash Surya

All as per item No 21.00 above but size 20 mm bore

All as per item No 21.00 above but size 25 mm bore

All as per item No 21.00 above but size 40 mm bore.

All as per item No 21.00 above but size 50 mm bore.

S&F in replacement of Gun metal Gate valve ISI marked with Iron wheel, head screwed both ends for Galvanised Iron pipe for sizes 15 mm bore complete all as specified and directed. Make- Zoloto/Sant/Kartar/APAR

All as per item No 26.00 above but size 20 mm bore

All as per item No 26.00 above but size 25 mm bore

All as per item No 26.00 above but size 40 mm bore.

All as per item No 26.00 above but size 50 mm bore.

S&F in replacement of Bib tap 15 mm size ISI marked standard of PTMT any colour high pressure screwed for iron pipes and fixed complete all as specified and directed. Make- Prayag/Polytuf/Symet

M&L for cast iron fittings such as bends tapers to pieces (Single or double) branch pieces any type, straight, connecting pieces, socket, collars, caps, plugs, flanges/spigot with nut, bolts and washers from 200 to 300 mm dia complete including taking down existing fitting complete all as specified and directed.

M&L for cast iron fittings such as bends tapers to pieces (Single or double) branch pieces any type, straight, connecting pieces, socket, collars, caps, plugs, flanges/spigot with nut, bolts and washers up to 150 mm dia complete including taking down existing fitting complete all as specified and directed.

M&L for ductile iron fittings upto 250 mm bore such as bend, (any type, radius and angle) tapers of any type (straight bend, decreasing, increasing, flanged or double socketed etc) tail pieces, tee, single branch, 'Y' junction, double branch, cross collar, cap, plug etc including push on joints(tyton) complete all as specified and directed.

S&F in replacement sluice valves 200 mm dia class PN-1.6 , IS-14846 with flanged ends, stainless steel spindle and iron wheel including nut bolts and rubber packing complete all as specified and directed. Make- Kirloskar /Upadhaya /GDPA/Kartar

S&F in replacement sluice valve 150 mm dia class PN-1.6 , IS-14846 with flanged ends, stainless steel spindle and iron wheel including nut bolts and rubber packing complete all as specified and directed. Make- Kirloskar/Upadhaya/GDPA/Kartar

S&F in replacement sluice valve 100 mm dia class PN-1.6 , IS-14846 with flanged ends, stainless steel spindle and iron wheel including nut bolts and rubber packing complete all as specified and directed. Make Kirloskar/Upadhaya/GDPA/Kartar

M&L for construction of valve chamber in replacement 1200 x 1200 x 1200 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in Cement Mortar (1:6), 230 mm thick, PCC bed (1:4:8) type D2 (using 40mm graded crushed stone aggregate) 150 mm thick, cement plastering 15 mm thick in Cement Mortar (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M&L for construction of valve chamber in replacement 1000 x 1000 x 1000 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in Cement Mortar (1:6), 230 mm thick, PCC bed (1:4:8) type D2 (using 40mm graded crushed stone aggregate) 150 mm thick, cement plastering 15 mm thick in Cement Mortar (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M&L for construction of valve chamber in replacement 600 x 600 x 600 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in Cement Mortar (1:6), 230 mm thick, PCC bed (1:4:8) type D2 (using 40mm graded crushed stone aggregate) 150 mm thick, cement plastering 15 mm thick in Cement Mortar (1:4) and applying a coat of black bituminous paint to the steel surfaces including dismantling and removal of old unserviceble valve pit complete all as specified and directed.

M&L for cutting of cast iron/Ductile iron pipelines and reducing to required length before laying of size 100 mm dia bore complete all as specified and directed.

All as per item No 41.00 above but size 150mm bore

All as per item No 41.00 above but size 200mm bore

M&L for taking down carefully Ceiling fan 1200/ 1400 mm sweep any size any capacity at site and refixing the same after replacing normal down rod to Anti Sucide down rod complete all as specified and directerd. Note:- (i) Anti sucide rod required for replacing shall be measured and paid separately and old rod will be deposited to MES store yard by the contractor. (ii) Any damage or loss of fan during taking down shall be made good by the contractor at their own cost and arrangement.

S&F Anti Sucide fan rod (12") white, MS pipe zinc plated, 19 mm OD, 1.8+/- 0.05 mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for, performance test and opening at impact load of 22 kgf+ and spring 'hidden in the pipe' will expand to about 1 m or more, complete all as specified and directed. Make:- Gold Life or any other equivalent make as approved by GE

S&F Anti Sucide fan rod (18") white, MS pipe zinc plated, 19 mm OD, 1.8+/-0.05 mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for, performance test and opening at impact load of 22 kgf+ and the spring 'hidden in the pipe' will expand to about 1 m or more, complete all as specified and directed. Make:- Gold Life or any other equivalent make as approved by GE

M/s Sohanil Construction

G S SANDHU & CO.

Charan sales and Service