172/EDC(H)/2023-24

Amount

Safe loading Carriage & unloading of following material from store centre to pit site/JE dump store.

Top Channel with clamp (125×65×2240)mm

Dropper Channel with clamp (100×50×2028)mm

T-Off Channel With Clamp

Sub Station base angle (75×75×6×2028)mm

LT Clamp with nut bolt

25 KVA T/F

63 KVA T/F

100 KVA T/F

250 KVA T/F

400 KVA T/F

PCC Pole 8.5 Mtr. Long

LT XLPE Cable Alluninium 1×400mm2

LT XLPE Cable Alluninium 3.5×240mm2

LT XLPE Cable Alluninium 3.5×400mm2

ABC Cable (1×16+1×25)mm2

ABC Cable (3×50+1×35+1×16)mm2

LT Cable (3×95+1×70+1×16)mm2

ABC Cable (3×120+1×95+1×16)mm2

G.I. Wire 6 SWG

Stay Set Complete

Earthing Complete

ACSR Weasel Conductor

Disc. Insulator with fitting

11 KV Pin Insulator with G.I. Pin

Eye Hook with clamp

DB BOX

X-Arm MS Angle 65x65x6 mm V-Type

F-Bracket for 8.5mtr PCC Pole

Errection of PCC Pole 8.5 meter long single pole with grouting & with all accessories.

Errection of pole mounted sub-station on support of 8.5 Mtr. Long PCC Pole including all required accessories (Exept to Sub-station base angle top channel, Dropper Channel and All required fixing accessories will be provided by contractor only).

Replacement of damaged PCC 8.5 m long on site for 11 kv or lt including grouting of new pole ,uprooting of damaged pole & with fixing all necessory accessories.

ABC Cable (1X16+1x25)sq mm stringing sagging binding and jumpering of ABC with all accessories

ABC Cable (3x50+1x35+1x16)sq mm stringing sagging binding and jumpering of ABC with all accessories,except to cable,eye hook db box other hangin materials have to arranged by contractor only

ABC Cable (3x95+1x70+1x16)sq mm stringing sagging binding and jumpering of ABC with all accessories

ABC Cable (3x120+1x95+1x16)sq mm stringing sagging binding and jumpering of ABC with all accessories

Stringing & Sagging of LT XLPE Cable Aluminum 1×240sqmm as per respo norm

Stringing & Sagging of LT XLPE Cable Aluminum 3.5x400sqmm as per respo norm

Stringing & Sagging of LT XLPE Cable Aluminum 3.5x240sqmm as per respo norm

Ordinary earthing by 11 KV MS earth Rod 2500 mm long as per RESPO schedule. All material except earthing rod shall be supplied by the contractor.

Grouting and Nozzling of 11 KV stay set complete including fixing of necessary clamps. Accessories required including its grouting by civil material (sand, brick blast & cement). All material except stay wire shall be supplied by the contractor.

Stringing & Sagging of three phase 11 kv ACSR weasel Conductor as per respo norm(nut n botls have to arrange by contractor only on no extra payment)

Fabrication, Installation and commissioning of 25/16/10 KVA T/F on double/single pole with all accessories. All material except 25/16/10 KVA T/F shall be supplied by the contractor. ( all fixing materials have to arrange contractor one self, like nut bolts,suitable lug etc.) on no extra payment or bill

Fabrication, Installation & commissioning of 63 KVA T/F on Double pole with all accessories. All material except 63 KVA T/F shall be supplied by the contractor.

Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation, commissioning of 100 KVA T/Fs of T/F Plinth and including jumpering with the system ( All the required martial for above job shall be provided by contractor except T/Fs)

Placement of 11/0.4 KV T/Fs from dump place(departmental store hardoi ) to newly constructed T/Fs plinth & installation, commissioning of 250 KVA T/Fs of T/F Plinth and including jumpering with the system ( All the required martial for above job shall be provided by contractor except T/Fs) as per respo norms

Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation, commissioning of 400 KVA T/Fs of T/F Plinth and including jumpering with the system ( All the required martial for above job shall be provided by contractor except T/Fs) as per respo norms

Looping & chopping of tree branches for clearance of HT/LT line after clearance of line throughout pieces of tree branches of site(after taking noc from concerned department as per need n rules and regulations by contractor one self only.

Installation and Fixing of 11kv Fuse Set (all Material arranged by the contractor except fuse set )

Construction of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick. Brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be filled from the ground level up to 15 centimetres below from the top of wall, Cement, sand & brick Ballasts should be filled up to 15 centimetre. Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4.The T/Fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand.(All the material to be arranged by the contractor).

Repair of T/F plinth of size 2x2x1.5 m on a padding 0.25M deep in ground 1:5:10 cement sand and brick ballast on the top of padding brick work Ist class brick of 0.95 mtr height & 0.35 mtr wall will be constructed. Rest wall should be 0.23 mtr thick. Brick work in ratio 1:4 cement & cores Sand in the hollow portion the sand should be filled from the ground level up to 15 centimetres below from the top of wall, Cement, sand & brick Ballasts should be filled up to 15 centimetre. Two no. of channel 100x50 in length 1500mm will be grouded.0.35 CM.RCC will be done with cores sand, cement and stone ballast in the ratio of 1:2:4.The T/Fs plinth should be plastered on all sides 12mm thick in ratio 1:6 by cement and cores sand.(All the material to be arranged by the contractor).during this making of temperory relocation of t/f and installion on same plint after reapir of plinth have to arrange by contractor one self only.

Construction of toe wall around the 11/0.4 kv S/S, fuse unit size 0.75 Mt. At Base and 0.23 Mt. At top as per RESSPO Norms by lst class bricks in the ratio 1:6, Base concreting of the wall to be done in ratio 1:6:12 and plaster 12 mm thick in ratio 1:4.& fabrication of fencing with wire mesh 10SWG(37mmx50mm)(all material to be arranged by contractor).

loading,carriage unloading of fresh T/f oil from departmental store hardoi or workshop Hardoi, to corresponding sub station under edd shahabad.

Collecton cum Carriage of Scrap generated Material from working site to store hardoi or via corresponding sub station to hardoi store(damaged weasel conductor or old and used condr or damaged abc cable or old & used cable, GI related materials)

Dismantling of old used (Existing) material and loading, Carriage & unloading from site to JE Dump store/store centre, Hardoi,As per decision of competent authority on legal terms and use

10&16 KVA T/F

25 KVA T/F

63 KVA T/F

100 KVA T/F

Neeraj Electricals