Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹36.8 L+₹1.6 L (4.65%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹36.8 L+₹1.7 L (4.72%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹37.9 L+₹2.7 L (7.76%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 |
Tender Value
Refer Docs
EMD Value
₹86,000
Closing Date
30 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS PIN 913862 C/o 56 APO
Special repair to certain bldgs P-6 P-7, T-31, T-11 , T- 83 P-03 , Addn/altn to bldg No T-40 Office Complex, drainge approx 300 mtr, constuction of drain for 3 CI Det NCIB and special repair to sewage system in bldg No T-43 T-44
2022_MES_520458_1
GER-09/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
As per tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹86,000
Yes
28 Jun 2022
28 Apr 2022
1 Jun 2022
28 Apr 2022
30 May 2022
12 May 2022
60 days
Amount
Sch 'A' Part-I (B/R works) Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.
M&L for 15mm thick screed bed or bedding in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed.
M&L for rendering 10 mm thick in cement mortar (1:3) on fair faces of brick or concrete surface , finished even and rough for receiving wall tiles complete all as specifed and directed.
M&L for glazed ceramic coloured tiles of size 450x350x7mm/ 350x250x7mm (premium quality) on vertical surface such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings complete all as specified and directed.
S&F for pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of approved colour having tensile strength 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions complete all as specified and directed.
S&F for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with 'L' or 'J' type hooks or cranked hooks bolts and washers in roofs, walls etc with grade of zinc coating 275 gm/sqm complete all as specified and directed.
S&F for 0.80 mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness (below or above the ground level ) complete all as specified and directed.
M&L for 75mm thick PCC type C-2, (1:3:6) (using 40mm graded stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight) complete all as specified and directed.
Demolition of cement concrete (unreinforced ) of any description and position not otherwise specifically provided complete all as specified and directed.
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in coping, benching, hold fasts, water troughs, bed block, surface channel and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for and removal of debris from site complete all as specified and directed.
M&L for RCC (1:2:4) type B-1 (using 20mm graded aggregate) as in slab supported on wall, beam and column in floors roofs, landing, balconies canpopies and in shelves complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Mild steel TMT bars 6mm to 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for formwork to edges of concrete flats, breaks in floor, opening in concrete walls, floors and roof and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20cm wide with finished fair faces complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work using old size bricks sub class 'B', straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.
M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius, built in cement mortar (1:4) complete all as specified and directed.
Taking down cement plaster, any description on brick or stone or cement concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick, stone or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.
M&L for applying two coats of distemper oil emulsion paint over one coat of chalk whitening on new plastered surface complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening and a coat of 3mm thick wall care putty complete all as specified and directed.
M&L forprepartion of old plastered surface of wall and applying one coat of distemper oil emulsion paint ove one coat of chalk whitening complete all as specified and directed.
M&L for preparation of new plastered surfaces of brick.concrete/plastered/un plastered surface of walls and pillars cornices etc and applying two coats of white wash oner one coat of chalk whitening complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.
M&L for preparation of old decorated plastered or un plastered surfaces on walls and applying one coat of cement base paint complete all as specified and directed.
M&L for preparation of old decorated brick/concrete plastered/un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of lime white wash on walls, pillars, cornices etc complete all as specified and directed.
Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.5 Sqm and n.exc 4 Sqm each and removing to store complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.
M&L for Anodised aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M&L for Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, 1 No, floor door stopper, anodised aluminium snap beading, screws etc including powder coating of any colour (thickness of powder coating not less than 50 micron) complete all as specified and directed.
S&F for 5.5mm thick sheet glass ordinary quality fixed to aluminium doors in square n exc. 5 sqm in each pane complete all as specified and directed.
M&L for 12mm thick prelaminated particle board, interior grade both side decorative choice lamination fixed to aluminium doors or similar works complete all as specified and directed
M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, mortice lock, 1 No, floor door stopper, anodised aluminium snap beading, screws etc including powder coating of any colour (thickness of powder coating not less than 50 micron) complete all as specified and directed.
M&L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square complete all as specified and directed.
M&L for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S . frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing mentioned in SSR Part-II 2010 complete all as specified and directed.
Dismantling timber scantling 40 Sq cm and over in section, in any position (framed work) complete all as specified and directed.
S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 290 grade E-1658 complete after dismantling of old unserviceble structural steel work all as specified and directed.
M&L for Steel windows factory made with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as per IS-1038 complete all as specified and directed.
M&L for hacking out broken glass (any thickness size, quality or description from wooden frames glazed with putty/beads complete all as specified and directed.
M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty and steel pins or wooden beads in squares not exceeding 0.50 square metre in each pane, complete all as specified and directed.
M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.
M&L for preparation of old steel surfaces and applying one coat of synthetic enamel paint any tint including preparation of surfaces complete all as specified and directed.
M&L for preparation of old wooden surface and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F for 100mm long butt hinges, medium weight, cold rolled, mild steel complete all as specified and directed.
S&F for 100mm long aluminium anodized barrel tower bolts extruded section all as specified and directed.
S&F for 125 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.
Taking up or down GI tubing 15 mm bore and connections including cleaning for refixing or removal complete all as specifed and directed.
Taking up or down GI tubing 20 mm bore and connections including cleaning for refixing or removal complete all as specifed and directed.
S&F for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors complete all as specified and directed.
S&F for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, Tee, Elbow, union, Nipple, short pieces and fixed to walls, ceilings or laid in floors complete all as specified and directed.
M&L for 15mm dia bib tap cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe complete as in repair as in repair all as specified and directed.
S&F for 15mm bore fancy type chromium plated angle valves, cast copper alloy with crutch or butterfly handle screwed for iron pipe or for brass ferrule and fixed complete as in repair all as specified and directed.
M&L for 15mm dia gun metal, gate/globe valve with iron wheel head screwed on both sides for iron pipes complete as in repair all as specified and directed.
M&L for 20mm dia gun metal, gate/globe valve with iron wheel head screwed on both sides for iron pipes complete as in repair all as specified and directed.
S&F for 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) complete as in repair all as specified and directed.
S&F in reapir brass chromium plated tubular towel rail 20 mm dia 60 cm long with and including one pair of brass chromium plated brackets complete all as specifed and directed.
S&F for Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete as in repairs all as specified and directed.
S&F in reapir PVC connection 15 mm dia with PTMT nuts of length 600mm at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed.
S&F for 20 mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete as in repair all as specified and directed.
S&F for vitreous China wash basin, white, flat back, size 550x 400mm including cutting for and pinning in ends of brackets or errecting stand, angle bracket (but exclusive of fixing of supply waste pipe, tap) complete all as specified and directed.
S&F for 15mm bore pillar tap fancy type cast copper alloy with chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete as in repair all as specified and directed.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenchs or in floor of dia or bore 110 mm complete as specified and directed.
S&F for PVC SWR bends of 110 mm bore complete all as specified and directed.
M&L for 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in complete all as specified and directed.
S&F for soap dish fixed with including chromium plated brass screws and wooden plastic cleats complete as in repair all as specified and directed.
S&F for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe as in repair complete all as specified and directed.
S&F for PVC low level flushing cistern 10 ltrs capacity white with inlet ball valve, float valve and handle including providing & fixing MS angle iron brackets, PVC flush pipe complete as in repair all as specified and as directed.
S&F for flush pipe of polythylene of low or high density or PVC 32mm dia for low level cistern complete all as specified and as directed.
S&F in repair rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed complete all as specifed and directed.
S&F in reapir rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs including dismantling old unserviceable tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed complete all as specifed and directed.
S&F for anodised aluminium alloy curtain rod including fixing brackets stops rollers for holding curtain rod and ring complete as in repair as all specified and directed
Dismantling wall and ceiling boards (fiber,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified & directed.
Dismantling of timber fillets, rails, posts, rafters, purlin etc under 40 Sqcm in section complete all as specified and directed
M&L for 4mm thick designer cement fibre ceiling board in ceiling fixed with screw as per manufacturers instructions , laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 12 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions complete all as specified and directed.
M&L for Earth/sand filling under floors or in foundation including water and consolidation complete all as specified and directed
M&L for Anodised aluminium ornamental grill of 80x80mm mesh size and 4mm dia of aluminium section for grill, fixed to window/ door /partition with L section aluminium beading of size 25x25mm complete all as specified and directed.
M&L for PCC (1:4:8), type D-2 using 40mm graded stone aggregates as in sub base of floors and mass concrete complete all as specified and directed.
M&L for 40mm cement concrete 1:2:4, type B1 (using 20mm graded aggregates) as in top surface of hardstanding complete all as specified and directed.
M&L for coloured vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
M&L for vitrified tiles light shade (premium quality) 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 10 mm thick backing layer of cement plaster in cement mortar (1:4) complete all as specified and directed.
M&L for PCC type C-1, 1:3:6 (using 20mm graded stone aggregate) as in plinth courses, string courses lacing courses papapets and railing upto 60 cm in height coppying kneelers apex stonee bed plates kerbs, water through and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for rendering 20mm thick on other than fair faces of brick work or stone masonry in cement morter 1:4 even and smoth without using extra cement complete all as specified and directed
M&L for Use & waste of formwork to sides and soffits of floor or roof beam,beam haunchings, girders, bressummers, lintels, catilevers, shelves including sup-ports, overhangs, at also splays between floor and beams etc in rough finished flat surface of concrete complete all as specified and directed.
M&L for RCC (1:2:4) type B-1 (using 20mm graded aggregate) as in beam, cantilever, lintel over 1.5m span complete all as specified and directed.
M&L for RCC 1:2:4, type B1 (using 20mm graded aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L for RCC 1:2:4, type B1 (using 20mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for formwork to sides of columns, post, struts, piers and stenchions for fair finished surface complete all as specified and directed.
M&L for use & waste of formwork to sides of concrete foundation, footing, bases of colums, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed.
M&L for PVC false ceiling with frame made of electric resistance welded semi-bright steel tube of size 38mmx35mmx16mm SWG. The grid size of ceiling frame shall not exc 600x600mm. The frame shall be painted with two coats of synthetic enemal paint over one coat of red oxide primer and hung to steel truss with the help of 4mm dia GI wire. The PVC ceiling shall be Hallow multi chambered section size 250mmx6mm jointed to another by male and female push fitting system and will be fixed to the help of steel screws including necessary cutting for electrical fitting and refixinf of eletrical appliances at new specified place all as specified and directed.
M&L for PVC wall paneling of approved shade and colour UPVC hellow section 9-10mm thick nad 1mm thick wall thickness printed/designer jointed together with grooves and tension joints and fixed with screws on walls finshing sides and top wuth 'U' or 'T' or any other suitable PVC section matching the hade of panels including preparation of wall surface if required complete all as specified and directed.
M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for stone walling of random rubble masonry (except stones, using old unserviceable stone after cleaning), uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for plain cement concrete type B-2(1:2:4), (using 40 mm graded stone aggregates) in surface channels and drains complete all as specified and directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and directed.
Demolition and breaking up drain pipes of 300cm bore (salt galzed stoneware, AC or reainforced concrete) set in cement morter complete all as specified and directed.
S&F of 600mm bore reinforced concrete pipe class NP-2 laid jointed with collar in neat cement slurry complete all as specified and directed
M&L for providing pre-cast cement concrete landing cover salbs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1 using 20mm grading stone aggregate and setting in cement morter 1:6 complete all as specified and directed
M&L for thick PCC (1:3:6), type C-2 using 40mm graded stone aggregates as in sub base of floors and mass concrete complete all as specified and directed.
M&L for construction of septic tank, with cover slab of RCC M-25 (design mix) for 100 users, brick work in CM 1:4 (with top of slab at ground level) including necessary filling and disposal of surplus soil as directed, RCC manhole cover with angle iron welded frame complete with permanent speicifications complete all as specified and shown on drawing No CE/TD 1202/2003 SH 1/2 & 2/2.
M&L for construction of soakage well 3.6 Mtr dia and 3.00 mtr deep below inlet (depth) from inlet pipe to ground level 45cm including excavation and earth work in any type of soil, PCC 1:4:8 type D-2 (using 40 mm graded crused stone aggregates) in foundation, wall in honey combed brick work in CM 1:4, cover slab of M-25 (design mix), filling with brick bats, earth cushion on brick lining on top and inlet pipe 150mm dia and complete all as specified and shown on drawing No CE/TD 1202/2003 SH 1/2 & 2/2.
De-sludging of manhole septic tank & filter beds of any description, any capacity and in any position by pumping out and removing to a distance exc 250m by mechanical mean (trolly mounted) and burring in pits all as per direction of Engr in Charge.
Demolition and breaking up drain pipes of 150cm bore (salt galzed stoneware, AC or reainforced concrete) set in cement morter complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm bore SGSW pipe complete all as specified and directed.
Supply and laying salt glazed stone ware drain pipe grade A 150 mm bore lad on concrete bed and jointed complete all as specified and directed
Supply only integral water proofing compound complete all as specified and directed.
M&L 75mm bore PVC (SWR) pipe single cosketed in any lenth with rubber ring joints fixed to walls complete all as specified and directed.
S&F for PVC (SWR) junction single (Single 'T') equal or unequal 110mm complete all as specified and directed.
Sch 'A' Part-II (E/M works) Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc.) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications complete all as specified and directed.
M&L for point wiring for one light point/fan/bell/buzzer point controlled by one-one way switch with 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor unsheathed in and including non metalic rigid PVC casing & caping of 25mm width (Medium grade double locking system) complete with all acessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet as top cover, and 1.5 Sqmm. (nominal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth dolly including making good the diturbed surfaces compete all as specified and directed. (Note : Three run of copper conductor of required size and one run of casing capping measured as one unit).
Description all as per Serial item No 114 above but for one 5 pin 6 Amp socket outlet on independent board controlled by one 6 amp switch complete all as specified and directed.
Description all as per Serial item No 114 above but for one 5 pin 6 Amp socket outlet on same board controlled by one 6 amp switchcomplete all as specified and directed.
Description all as per Serial item No 114 above but for one 6 pin 16/6 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistraind copper cable with 2.5 sqmm single core multistraind FRLS copper cable as earthling lead complete all as specified and directed.
M&L for Switch socket combination 3 pin 5 Amp/16 Amp, 230 volts, 5 in 1 flush type complete all as specified & directed.
M&L for Switch piano, flush type single pole, one way 6 Amp, 240 volts complete all as specified and directed.
M&L for switch socket combination 2 in 1, 5Amp 230 volts flush type complete all as specified and directed.
M&L for Socket outlet 5 pin 5 amp 230 volts flush type complete all as specified and directed.
M&L for Ceiling rose two to three terminal (65 x 50mm), PVC/ polycarbonate insulated body complete all as specified and directed.
M&L for Ceiling fan regulator elctronic, stepped type, hum free suitable to control speed of fan from 0 to 100% rotary type five step 240 volts AC complete all as specified and directed.
S&F for switch modular type one way 5 Amps 240 volts, with one module, complete all as specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
S&F for modular switch socket combination 2 in 1, 5 pin, 6 Amp flush type complete all as specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
S&F for modular switch socket combination 2 in 1, 5 pin, 16 Amp flush type complete all as specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
M&L for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in and including LED tube light connection complete prewired and connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height complete as in repair all as specified and directed. (Make :- Havells cat No LHEXARP7SN1W020 or equivalent in Philips/Wipro/C&S
S&F in repairs High efficacy 2'x2' recess LED flat panel light fittings 36W LED 6000K edge-lit luminaire with in and including LED lamp suitable for armstrong/grid ceiling complete for low ceiling applications complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete as in repair (Make :-Havells, Cat part PLUTONEO02X2PLR34WLED840S / Crompton Greaves, Cat No LCTLSNE-36-FO-CDL or equivalent in philips/Wipro.
M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. Make: Legrand, Cat Part No : 607711 or equivalent in Havells or C&S (Note:- MCBs will be measured separately.)
M&L for MCB single pole & neutral 240 volts any rating from 6 to 32 amps, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
M&L for MCB single pole, 240 volts any rating from 6 to 32 amps, 'C' series/curve with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2009 including testing on completion complete all as specified.
Supply,laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 sqmm 2 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of calbe shall be one length unless otherwise as directed by GE).
Supply,laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 50 sqmm 3.5 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of calbe shall be one length unless otherwise as directed by GE).
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm on plan for foundation, laying of cable and foundation of poles stays and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in trenches including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.
Removing of excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed.
M&L for dry sand cushioning to underground cable, provided with a layer 8 cm thick before and 15 cm deep after laying and stretching jointing and testing the cable complete all as specified and as directed. (Note: Punned thickness of sand shall be measured and paid).
S&F for laying unreinforced precast factory made concrete cable cover class IV type -I flat size 250mmx150mmx40mm complete as all specified and directed
M&L for 50mm dia galvanized steel tubing (light grade) with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connections, check-nuts, caps, plugs, diminishing pieces and flanges etc as in pole, crossing of roads, laid in trenches, fixed on walls for protection of cables complete all as specified and directed.
Supply, insallation, testing and commissioning LT panel board suitable for working on 3 phase, 4 wire, 415 volts, AC, 50 Hz outdoor type, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation, factory fabricated made out of 3.2mm thick CRCA sheet duly powder coated and shall be CPRI approved and as approved by GE. The panel shall have front and rear opening, locking arrangement, bus bar chamber and switch gear compartment, hinged door with rubber gasket, botton cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, aluminium bus bar duly covered with heat shrink sleeves colour coded duly fixed on DMC/SMC insulators, aluminium strip connection from bus bar to outgoing MCCBs and copper conductor cable of adequte size of MCBs, housed in a separate bus bar chamber and control wiring adequate size and length, outgoing MCCBs shall have extended bus bar links and panel mounted on 50x50x5mm size MS angle iron frame duly painted including PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in foundation design subject to approval of GE as per as site requirement. The minimum depth height width of panel is 450x1200x1200 mm respectively, minimum claerance from ground level is 450 mm including removing old unserviceable item complete all as specified and comprising :- (a) MCCB 160 Amps, FP, 35 KA, 415 volts, 50 Hz - 01 No (Adjustable type) (b) MCB 63 Amps, FP, 10KA, 415 volts, 50 Hz- 1 No (c) MCB 40 Amps, DP, 10KA, 415 volts, 50 Hz - 6 Nos (d) Digital voltmeter with VSS-01 set, Digital Ammeter, with CTs & ASS-01 set (e) LED phase indication lamps RYB-01 set (f) Aluminium bus bar TPN 300 Amps rating - 01 set
M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground earth pit not less than 2.25m deep below ground level with top edge of the plate not less than 1.5m deep below normal ground level connected to and including 25X4mm thick galvanised iron strip by means of bolts, nuts, checknuts and washers of galvanised iron or steel all as specified in electrical plate No 3 of SSR (2009) part-I including 40mm bore GI pipe light grade for protection of earth strip and PCC 1:2:4 type B-1 as in pit, Precast RCC earth pit cover 8 cm thick reinforced with 8mm dia TMT bars @150mmc/c and two handles, excavation and earth work in any type of soil and alternate layers of charcoal, common salt and 20mm bore galvanised medium grade steel tubing for watering with one end fixed with cast iron funnel and wire mesh and testing on completion complete after taking down old unserviceable earthing all as specified and directed. (Note:-Earth strip and protection pipe upto board is included in the rate quoted).
Supply and fixing for white cover plate with frame of 1 module complete as all specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
Supply and fixing for white cover plate with frame of 3 module complete as all specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
Supply and fixing for white cover plate with frame of 4 module complete as all specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
Supply and fixing for white cover plate with frame of 6 module complete as all specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
Supply and fixing for metal flush box for 1 module complete as all specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
Supply and fixing for metal flush box for 3 module complete as all specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
Supply and fixing for metal flush box for 4 module complete as all specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
Supply and fixing for metal flush box for 6 module complete as all specified and directed. Make: Anchor (Roma) or equivalent in Havells/ Legrand.
S&F for Air circular fans 230 volts single phase oscillating of sweep size 400mm suitable for wall mounting. Make: Crompton model : High flo Cressida Colour White or equivelant in Havells/Bajaj
S&F for sheet metal enclosure single pole and neutral with two pin and earth plug and AC socket with one single pole MCB 20 amp complete as in repair all as specified and directed. Make: Havells, Cat Part No DHDCUDP020 or equivalent in Legrand or C&S.
M&L for sheet metal enclosure MCB distribution board, double door single pole and neutral with IP-66 protection single phase 240 volts 08 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. (Note:- MCBs will be measured separately.)
M&L for sheet metal enclosure VTPN distribution board, double door single pole and neutral with IP-66 protection single phase 415 volts 08 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing MCCB and incommer capacity 63 Amps and SPN as outgoing and making good distributed wall surfaces to match with existing specification complete as in repair all as specified and directed. Make: Havells, Cat part No DHDLVDRWOFO08 or equivalent in C&S/INDOASIAN
S&F MCCB of rating 63 Amps, 4 pole, loadline with breaking capacity 25 KA complete all as specified and as directed. Make: Havells, Cat part No IHLGHF0063 or equivalent in C&S/INDOASIAN
M&L for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable sub main wiring items complete all as specified and directed. Note : - 02 run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable and 01 run of PVC casing and caping shall be measured as one unit.
Supply,laying, jointng and testing, XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 25 sqmm 4 core laid in trenches, ducts, pipes, on poles and connection with necessary cables lugs, glands nut bolts complete after taking down old unserviceable cable all as specified and directed. (Note :- Excavation of earth work, removing, returning filling in, sand cushoining, concrete cable cover and protection GI pipe shall be measured and paid separetly and length of cable shall be one length unless otherwise as directed by GE).
S&F on load change over switch 415V, 4 pole of capacity 63 Amp with SS Enclosure with handle and interlocking kit complete all as specified and directed. Make : Havells, Cat Part No IHCNFE0063 or equivalent in Legrand or C&S.
M&L for brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mm x 115mm x 75mm, complete all as specified and as directed.
Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
MEHTA OM PARKASH
NATIONAL TRADING COMPANY
M/S BADRI NATH GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .