PROVN OF GUARD ROOM CUM STORE NEAR MD ACCN OF JCOS/ORS AT DRONACHAL TOP AND 06 EARTHING PITS FOR COMMUNICATION EQUIPMENTS AT DRONACHAL SIGNAL CENTRE BHOPAL

Amount

M&L for surface dressing n. exc 15 cm in depth in hard/dense soil complete all as specified.

Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation in hard rock and getting out complete.

Removal of excavated soil recd from surface dressing and excavation over area and in trenches to a distance exc 50m but n exc 250m complete all as specified and directed.

M&L for approved earth filling in floors or pavings, laid in layers n exc 15cm thick spread, levelled and rammed incl watering complete all as specified and directed

M&L for ATT to back filling in contract with fdn @ 7.5 Ltr of emulsion per Sqm of vertical surface area complete all as specified and directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L for Cement concrete 1:4:8 type D2 (40 mm graded agregates) in foundations filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete design mix M-25 using 20mm graded agg Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete

M&L for Reinforced cement concrete design mix M-25 using 20mm graded agg in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete design mix M-25 using 20mm graded agg in roof beams , cantilevers , bressummers , lintels over 1.5 m span complete all as specified and directed.

M&L for Reinforced cement concrete design mix M-25 using 20mm graded agg in Slabs supported on walls,beams and columns in floors, roofs/chajja, landings, balconies, canopies, deck slabs and in shelves and the like roof complete all as specified and directed.

M&L for 40 mm Damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 type B-0 complete all as specified and directed.

M&L Reinforcement 10mm dia and over TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia complete all as specified and directed.

M&L Reinforcement 8mm dia and over TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia in roof slab/chajja complete all as specified and directed.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns and similar work for fair finished surfaces of concrete complete all as specified and directed.

M&L for Formwork to plinth beams and similar work for fair finished surfaces of concrete complete all as specified and directed.

M&L for Formwork to sides of pillars, columns for fair finished surfaces of concrete complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beam etc For fair finished surfaces of concrete complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs as roof slabs, floor slabs, landinqs, lintel / chajja and similar work not exceeding 200 mm thick for fair finished surfaces of concrete complete all as specified and directed.

M&L for Use and waste of formwork to edges of concrete flats ,treads, break in floors window cills, concrete railing , opening in concrete wall, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide to rough finish surface of concrete flat.

M & L for Brick work with flyash bricks, modular size ,straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified.

M & L for rendering 10mm thick cement plaster 1:6 on brick masonry wall surfaces finished even and smooth without using extra cement ( internal) complete all as specified and directed.

M & L for rendering 10mm thick cement plaster 1:6 including 5 mm thick in CM 1:4 with WPC on brick masonry wall surfaces finished even and smooth without using extra cement ( External) complete all as specified and directed.

M & L for Rendering 5 mm thick on concrete surfaces of internal ceiling in cement plaster 1:3 finished even and smooth without using extra cement(ceiling) complete all as specified and directed.

Supply only Integral waterproofing compound

S & F pressed steel door frame of size 125x 60mm with one or more rebates incl necessary fixing lugs, hinges ,lock strike plates, holdfast concrete and its filling hollow portion, fixing etc. complete all as specified .

S&F 35 mm thick factory made 2nd class hard wood plain framed panelled ( two panels) door shutters with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS-1003 (Part-I) , kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for 35 mm thick IInd class Hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhat complete all as specified.

S & F steel windows and ventilator made of pressed steel frame with double shutters (glazed and flyproof) incl pegstay handle complete except guardbar, glazing and wire gauze complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290 Gde-E-165 complete all as specified and directed.

S&F, Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F, Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M & L 3mm thick sheet glass ordinary quality n exc 0.5 sqm in each pane in steel windows/ ventilators complete all as specified and directed.

S & F GI wire cloth 0.50mm nominal dia of wire and 1.00 mm average width of aperture in fly proofing to doors & windows complete all as specified and directed.

S & F 200mm size aluminium anodised barrel tower bolt complete all as specified and directed.

S & F 300mm size aluminium anodised sliding bolt complete all as specified and directed.

S & F 150mm size aluminium anodised fabricated type door handle complete all as specified and directed.

S&F for 100 mm mild steel butt hunges complete all as specified and directed.

S&F for 150 mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black complete .

Floor door stopper 150 mm cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete

S&Fixed tublar towel rail 20mm dia chromium plated brass of size 60cm long complete all as specified.

S&F Grating round 140mm size of PTMT (Minimum) (Minimum wt 100 gms) complete all as specified.

S&F for 15mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor complete all as specified.

all as per item No 47 above but 20mm bore.

S&Fix of Bib tap cast copper alloy with crutch or butter fly handle serewed down for 15mm bore.iron pipe or for brass ferrule & fixed complete all as specified.

S&F for fancy type pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks & fly nuts for iron pipe of 15mm bore fancy type complete all as specified.

S&Fixed of CP brass Chromium plates angle Stop valves of 15mm bore screwed for 15mm bore iron pipe or union complete all as specified.

S&F 500ltr capicity rotational moulded polyethlene water storage tanks (cylindercal vertical with close top ) hoisted and fixed in position all as specified in SSR part l

S&Fixed or Nipple suitable for HDPE water tanks min 45 gm of 20 mm bore of PTMT complete all as specified & directed.

S&F of PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified.

S & F Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe fixed (excluding flushing cistern, flush pipe and waste pipe) all as specified.

S&Fixed of vitreous china water closet (squatt pattern) complete incluing provision of lime concrete bedding fixed iof orisia pattern size 580x440mm, white, with and including foot rest (excluding flooring cistern & flush pipe).

S&Fixed PVC valveless syphonic action type flushing cistern low level 10ltrs capicty white, fixed with new brackets complete all as specified.

S&Fixed of flush pipe of polythene of low or high density or PVC 32mm for low level Cistern Complete all as specified..

S&Fixed of vitreous china WHB white flat back size 550mmx400mm on new brackets excluding taps waste china & plug including bracket etc complete all as specified .

S&Fixed of looking mirror 5mm thick of best quality fixed over 6mm thick plywood & PVC or wooden bead on all arround with hangings arrangement complete.

S&Fixed PVC Flexible waste pipe 32 mm dia with socket for WHB upto floor level and length not less than 0.60 M complete all as specified and directed.

S&F 20 mm dia gun mettal gate valve with iron wheel,head,screwed both ends for iron pipe and fixed complete all as specified.

S&F for 110mm Bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

Ditto as item No. 63 above but 75 mm bore complete all as specified.

S&F for 110 mm PVC (SWR) bends any radius complete all as specified.

Ditto as item No. 65 above but 75 mm bore complete all as specified.

M&L 150 mm thick hard core gauge broken stone or boulders exc 63 mm but n exc. 100 mm, deposited, spread and lev-elled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface

M&L 75mm PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection and hard standing complete all as specified and directed.

M&L for 75mm thick Cement Concrete 1:4:8 type D-2 (40mm graded aggregate ) in sub base of floors complete all as specified and directed.

M & L 550 x 550mm size and 20 to 25mm thick polished kota stone over 20mm th screed bed in CM 1:6 in floor complete all as specified and directed.

M & L 12 to 15mm thick polished kota stone of size 550x100mm over 10mm th screed bed CM 1:3 in skirting complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work in CM (1:4) for receving vertical dado tiling complete all as specified and directed.

M&L for glazed ceramic tiles coloured, digital printed with highlighter & bath concept as per design and pattern approved by GE of size 450x250x6-7mm/450x300x 6-7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and directed

M&L for screed bed 15mm thick in CM 1:4 complete all as specified and directed.

M&L for non skid-ceramic tiles coloured of size area of each tile exc.0.11 sqm but not exc . 0.18sqm 7 to 8mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to match

M&L, preparation of new decorated surfaces of wall applying two coat of exterior weather proof water base emulsion paint & inculding one coat of white cement base putty on walls all as specified and directed.

M&L for Preparation of new decorated surfaces of wall applying two coat of oil bound distemper over & inculding a coat of white cement base putty compelet all as specified and directed.

M&L for Three coats of white wash including preparation of ceiling surfaces complete all as specified and directed.

M&L for Three coats of white wash including preparation of wall surfaces complete all as specified and directed.

M&L two coat of synthetic enamel paint over a coat of primer to new wood surface girth exc 10 cm incl preparation of surfaces complete all as specified and directed.

M&L two coat of synthetic enamel paint over a coat of primer to new steel surface over 10 cm width or girth over one coat of red oxide primer incl preparation of surfaces complete all as specified and directed.

M&L for screed bed 20mm thick in CM 1:6 complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M & L 10mm thick rendering in CM 1:4 mixed with WPC over RCC roof slab while the concrete is still green finished even and smooth without extra cement complete all as specified and directed.

Material only for applying one coat of bitumen primer conforming to IS-3384 @ 0.40 Kg/sqm complete all as specified and directed.

Labour only for applying one coat of bitumen primer on finished plastered surfaces complete all as specified.

M & L applying two coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/sqm in each coat complete all as specified and directed.

M & L forAPP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified

M & L for 20-25mm thick PCC tiles using grey cement of size 250x250x20-22mm or 300x300x20-22mm ISI marked over 15mm thick bedding mortar in CM 1:4 set and jointed complete all as specified and directed.

M&L sand filling under floors including watering and consolidation complete all as specified & directed.

M&F 60 mm thick machine pressed precast concrete interlocking paver block (ISI Mark) M-35 grade as deign and pattern approved by GE as in path way / hard standing and filling of joints with fine sand complete all as specified & directed.

M&L, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.

M&L 150 mm bore reinforced concrete pipe class NP-2, ISI marked laid and jointed complete with collars.

M&L, PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in bedding to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested complete for 150mm bore.

M&L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channels and drains

Extra for forming fair finish to drains or channels 30 cm inner girth in cement concrete using extra cement, including forms, moulds, mitred /stopped ends etc.

M&L for 5 cm thick sand stone slab as in manhole cover etc of size not less than 0.60 x 1.20m, set and pointed in cement mortar 1:4 all as specified and directed.

Excavation in trenches n. exc 1.5 mtr width and n. exc 1.5 mtr in depth in hard/dense soil and getting out for UG cables

Returning filling in excavated soil including spreading, levelling, watering, well ramming in layers

M/L for sand cushioning for UG cables in trenches using clean dry sand all as specified and directed.

Sub class 'B' old size well burnt brick laid flate in trenches as protection to LT cable complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded aggregate for foundation of pole/ Paving/drain etc complete all as specified and directed.

Supply and laying in trenches or passing through pipe or fixing to pole/wall 1100volts grade heavy duty cable with PVC insulated, stranded aluminium conductor, served with inner sheathing of PVC tape, armoured with galvanised steel wire or strip and overall PVC sheathed nominal cross sectinal area 10 sqmm, 2 core, ISI marked, complete all as specified and directed.

S&F GI tubing light grade 50 mm dia galvanised with all fitting laying on floor/treanches/wall complete

“ Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper FRLS conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), , including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

One light point controlled by one 5/6 amps one way switch

One Fan /Exhaust Fan point controlled by one 5/6 amps one way switch

One Socket outlet, three/five pin, 5 Amp, controlled by by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin. on independent board

One Socket outlet, three/five pin, 5 Amp, controlled by by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin. on the same board with other switches,sockets, fan regulators etc.

Supply and fix switch socket outlet (ISI marked ) 05 Amps flush type complete all as specifierd and as directed.

Supply and fix switch socket combination (ISI marked ) 05 Amps flush type complete all as specifierd and as directed.

“ Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper FRLS conductor 2.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), , including PVC insulated multi-stranded copper conductor 2.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed.

Supply and fix switch socket combination (ISI marked ) 15 Amps flush type complete all as specifierd and as directed.

M&L ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.

Supply, fixing and testing ceiling fan of 1200mm sweep, 230 Volts, single phase, 50 Hz 3 blades, double ball bearing, BE rating connection up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 sqmm from ceiling rose / connector, including extra GI / MS pipe down rode, as per site requirement (approximate length 01 Mtr) complete all as specified and directed.

Supply fixing and testing exhaust fan electric single phase AC 240 Volts 50 HZ supply heavy duty corrosion resistant of 450 mm sweep size , 1400RPM , aluminium pressure die cast motor powder coated paint finished , light weight heavy duty , double ball bearing ,with louvers and connecting including provision 3 core flexible PVC insulated multi stranded copper conductor of size 0.5 Sqmm from ceiling rose/connector to fan incl four Nos of nuts,bolts and washers for fixing the frame complete all as specified.

Supply and Fix Building street light fittings 40 watts,IP 65

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted on wooden board with electrical connection complete all as specified and directed

Supply and Fix MCB SPN 40 Amps, 240 V, 16kA rupturing capactiy complete all as specified and directed.

Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed iIncluding taking down old one.

Supply and fix wall mounted LED batten fittings, 1 X 18 watt, 230 Volts ,4000K (1144 mm) extructed aluminium heat sink provided for efficient heat dissipatuion & integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and directed.

Supply and fix Storage water heater,with five star rating ,plastic body, electric driven complete of capacity 25 ltrs including all electric connections and water supply connection complete all as specified and as directed.

Earthing complete with galvanised iron earth plate electrode 60cmx60cmx3mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel wire 4 mm dia by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion.

Supply and Fix 9W LED tubelight complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cable etc including getting out soft/loose soil complete all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type soil.

Removing of surplus soil not exceeding 50mtrs and depositing where directed at a level not exceeding 1.5 mtrs above the starting point complete all as specified and directed by Engineer-in-Charge

Supply and lay for tubes 'medium grade ' with all galvanised fittings laid in trenches/on ground complete 25 mm dia.

Supply and fix gun-metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed for pipe 25 mm dia.

Cutting existing steel tubing for alteration and addition 25 to 32 mm GI tubing.

M & L for chemical earthing as per ASHLOK make model T-39, copper coated safe earthing electrode (SEE) of 3 mtr length with inner pipe of 40 mm dia and outer pipe of 80 mm dia with min 80-100 micron coating filled with black fill compound mixed with soil and high specific gravity crystallin conductive mixture (CCM) of grade B filled inside the earth electrode including drilling of hole of 150 mm dia bore with boring machine up to 20 mtrs depth in hard rock and filling the bore hole with black cotton soil up to 17 mtrs level ie below the electrode bottom level, including PCC earth pit and copper earth strip of 32x6 mm with GI tubing light grade for protection up to 7.5 mtrs complete all as specified and directed.

Supply and fix 32 x6 mm copper strip as in earth continuity conductor fixed to wall or pole or recess or cheses or burried in ground or drawn in conduit pipe or any other indicated situation for loop earthing etc as required all as directed.

RAJPATI CONSTRUCTION

CREATIVE CONSTRUCTION

MS Soumya consultants and designers