REPAIR/REPLACEMENT OF BOUNDARY WALL CHAIN LINK FENCING AND OTHER CONNECTED ITEM UNDER AOR OF AGE BR DETT B UNDER GE 862 EWS

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Description all as per Item No 2 above, but except bricks. Note: Old bricks retrieved from demolition shall be reused

M&L for providing cement concrete 1:2:4, type B-1 (using 20mm grade crushed stone aggreagte) as in copings, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m depth for foundation and n. exc 10sqm on plan and n. exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level and removal of debris from site, complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete, complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4, type B-1 (Nominal Mix), using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns and the like, complete all as specified and directed

M&L for providing reinforced cement concrete 1:2:4, type B-1 (Nominal Mix) using 20mm graded stone aggregate as in beams, cantilivers, bressmmers, lintles over 1.5 m span, complete all as specified and directed

M&L for providing reinforced cement concrete 1:2:4, type B-1 (Nominal Mix) using 20mm graded stone aggregates as in columns, pillars, piers, post, struts and the like, complete all as specified and directed

Returning, filling in with soil, trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick , complete all as specified and as directed.

Removing excavated material (soil) ,not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

Formwork to sides of concrete foundation, footing, bases of colums, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar work, vertical or batter rough finished flat surface of concrete, complete all as specified and directed.

Formwork to side of pillars, posts, struts, piers, columns and stanchions for rough finished surface of concrete, complete all as specified and directed.

Formwork to side and soffits of floor or roof beams, beam haunchngs, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, also splays between floors and beams, etc rough finished surfaces of conrete flat, complete all as specified and directed.

S&F for mild steel TMT bars 10mm dia and over as in reinforcement , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W, grade E-250, complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto & including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends as in stirrups, spacers and binders including binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W, grade E-250, complete all as specified and directed.

S&F in repair galvanised, 2 strand, steel barbed wire 2.24mm dia with 2mm barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line of wire to be measured) complete all as specified and directed.

S&F for concertina coil 1050 mm dia, 56 loops, 2.5mm core wire heavy galvanised (wire-275 GSM & strip-200 GSM), tensile strength of wire 1400-1500 N/Sqmm, weight 14.63 Kg / Coil, stretchable length 12M inlcuding securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc after dismantling of old concertina coil of any type complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling of posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as post embedded in concrete, brick work, masonry work etc complete all as specified and directed.

Excavation in post holes (or similar work) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface in any type of soil, complete all as specified and directed.

S&F for angle iron posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. Note :- Size of angle shall be as per standard drgs.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for galvanised iron chain link fencing with 3.8mm to 4mm dia wire mesh of size 100mm X 100mm (as per sample approved by GE) after dismantling of old unserviceble chainlink fencing of any type complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on concrete surfaces or other than fair faces of brick surface on wall in cement mortar 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 20 mm thick rendering on concrete or stone masonry surface or other than fair faces of brick masonry in cement mortar 1:4, surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered wall surface including cornices etc and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivalent make of any approved two or more colour pattern over and including a coat of primer, complete all as specified and directed.

M&L for complete removal of existing treatment of wall surfaces, preparation of plastered or unplastered or untreated wall surfaces including cornices etc and applying two coats of exterior emulsion all weather proof paint of Apex Ultima of ASIAN or equivalent make of any approved two or more colour pattern over and including a coat of primer, complete all as specified and directed.

M&L for precast RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in landings, cover slab, chajjas etc.and similar articles with plain faces, set in cement mortar 1:6, complete all as specified and directed.

S&F of 2mm thick fibre reinforced polymer sheet having tensile strength of 550 Mpa as in roof or wall cladding or view cutter of approved colour fixed with self tapping screws including dismantling of old sheet, complete all as specified and directed.

SATVIR GUPTA ENGINEER and CONTRACTOR (BID ID -3348627)

ABINASHI ENTERPRISES (BID ID -3347974)

M/S Ramesh Chander Gandotra & Sons (BID ID -3346081)

MEHTA OM PARKASH (BID ID -3347696)

KANWAL KUMAR GUPTA (BID ID -3349552)