ADDN AND ALTN OF FITNESS BAY AND PROVN OF TOILET BLOCK AT CGDHQ-10, CAMPBELL BAY UNDER GE (I) CAMPBELL BAY

Amount

B/R PORTION Excavation in trenches, n.exc 1.5 M wide and not exc 1.5 M depth for foundation, etc., and getting out in hard/dense soil complete all as specified and as directed.

M & L for hard core of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation, mass concrete and plinth beam complete all as specified and as directed.

M & L for use and waste of timber as in form work to sides of concrete foundation, footing, base of columns, rafts beam, sides and soffits of foundation and plinth beam and similar work for rough finished surfaces of concrete on flat complete all as specified and as directed.

M & L for use and waste of timber as in form work to sides of pillars, posts, piers, columns, square, rectangular or polygonal for rough finished surface, complete all as specified and as directed.

M & L for use and waste of timber as in formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and as directed.

M & L for RCC M-30 (design mix) (using 20 mm graded stone aggregate) as in foundation including raft, foundation beam, plinth beam and mass concrete, complete all as specified and as directed.

M & L for RCC M-30 (design mix) (using 20 mm graded stone aggregate) as in columns, pillars including providing groove for placing of precasted panel, piers, posts and struts complete all as specified and as directed.

M & L for RCC M-30 (design mix) (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L for mild steel TMT bars 10 mm dia and over cut to length bent to shape required incl cranking spirally for roofing and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

Description all as per item No. 8 above but 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, complete all as specified and as directed.

M & L for precast cement concrete block masonry (1:3:6) type C-1 (using 20mm graded stone aggregate) with solid blocks, exc. 10cm width, setting in CM (1:4) complete all as specified and as directed.

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar(1:6) on fair faces of solid block or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10mm thick in cement mortar(1:3) finished even and smooth without using extra cement on ceiling complete all as specified and directed.

M & L for preparing new plastered surfaces of wall and applying two coats of OBD over primer on decorated wall surfaces of any description, complete all as specified and as directed.

M & L for preparing new plastered surfaces of wall and applying two coats of anti fungal exterior acrylic emulsion on wall over a coat of exterior primer including 3mm wall care putty surfaces of any description complete all as specified and as directed.

S & F for factory made solid panel PVC door shutters 30mm thick (style) consisiting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam PVC sheet to be fitted in MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fitting in the frame at site, prelam PVC sheet used instead of plain colour PVC sheet and stiles & rails feathered at edges complete all as specified and as directed.

S & F for solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube and edges will be painted to match prelam sheet, complete all as specified and as directed.

S & F aluminium window powder coated ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed.

S & F European type WC (Pedestal Pattern) complete inlcuding pedestal pan and trap inlcuding connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as specified and directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S & F of Helath Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S & F Vitreous China wash hand basin, angle back, size 600 x 480mm white, including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plug and porcelain stopper but including brackets and waste pipe complete all as specified and as directed.

S & F PVC connections 450mm long with brass check nut with washers complete all as specified and as directed.

S & F for PTMT Grating round 140mm size fixed in position complete all as specified and as directed.

S & F in 15mm bore bib taps fancy type with chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S & F vitreous china soap dish and fixed to plugs with chromium plated screws and fixed complete all as specified and directed.

S & F Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and as directed.

S & F angle stop cock 15mm bore, fancy type, chromium plated (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and directed.

S & F steel tubes, medium grade 15mm dia bore galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S & F steel tubes, medium grade 20mm bore galvanized with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F PVC (SWR) pipes, single socketed, in any length, with rubber rings 75mm dia complete all as specified and directed

S & F PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia complete all as specified and directed.

S & F PVC (SWR) bends of 75mm bore complete all as specified and directed.

S & F PVC (SWR) bends of 110mm bore complete all as specified and directed.

S & F stop valves, cast copper alloy 15 mm bore, fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 500 litres (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

M & L for 100mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base, floor and pavings complete all as specified and directed.

M & L for coloured chequered cement concrete tiles 20cm x 22cm x 25mm thick, set in floors, etc laid over and including 20mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for providing 75mm thick cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in pavings, plinth protection etc., incl finishing cement concrete even and smooth w/o using extra cement complete all as specified and as directed.

S & F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S & F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

S & F 100mm long aluminium anodised, barrel tower bolts of extruded section, and fixed complete all as specified and as directed.

S & F 100 mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed, type B-21 complete all as specified and directed.

S & F 125mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M & L for rendering 15mm thick in CM (1:4) on fair faces old surface including preparation of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:6) on fair faces of old surface including preparation of old surfaces solid block or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M & L for complete removal and preparing old plastered surfaces of wall and applying two coats of OBD over primer on decorated wall surfaces of any description, complete all as specified and as directed.

M & L for preparing old plastered surfaces of wall and applying two coats of anti fungal exterior acrylic emulsion on wall over a coat of exterior primer including 3mm wall care putty surfaces of any description complete all as specified and as directed.

M & L for 18 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations fixed with screws to timber frame work complete all as specified and as directed.

M & L for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing atsite on PVC frame as per specifications and drawing complete all as specified and directed

M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification complete all as specified and as directed.

S & F anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified directed.

M & L for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified and directed. (Note:- Aluminium frame work is considerd under item no 58.00 above)

M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for glazed coloured ceramic tiles in vertical surface 350 x 250x 7 mm/ 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M& L for screed bed or bedding layer of mortar 15 mm thick in CM (1:4) for laying floor finishes complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Taking down shutters of any type description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed.

Taking down shutters of any type description exc 2 Sqm each complete all as specified and as directed.

M & L for fixing synthetic /rubber mat of 20mm thick of any colour and pattern appoved by the Engineer- in-Charge along with proper inter locking binding agents complete all as specified and directed.

M& L for fixing Plywood, 6mm thick grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.

M & L for fixing Plywood, 12mm thick grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.

M & L for dismantling and fixing wall mounted looking mirror of 12mm thick of size (2.5 x 2.5m) fitted in the wall with all proper arrangements complete all as specified and as directed.

M & L door closer aluminium extruded section body hydraulically fixed in repair regulated, designation No.3, universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S & F Vitreous China Urinal, Half stall type, white with flush pipe and waste pipe complete all as specified and as directed.

E/M PORTION Taking down carefully of any type point wiring light fans socket or power complete fitting such as switch ceiling roses, pendent, regulator, sockets etc removing material and making good disturbed surface of wall floor etc complete all as specified and as directed.

M & L for point wiring complete with 1.5 Sqmm PVC insulated unsheathed single core multi stranded copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed on walls/ in existing conduit on ceiling and terminated to sunken box of modular type including modular frame white cover plates suitable for fixing switches, sockets etc including 1.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connected to common earth dolly and taking down old one complete all as specified and directed for the following:- (a) One light point controlled by one way modular switch 6 Amps

(b) One ceiling fan point /Exhaust fan point controlled by one 6 Amps one way switch and regulator

(c) One 3 pin 6 Amps switch socket outlet point on independent board

(d) One light point controlled by two, two way 6 Amps switch.

(e) One 3 pin socket outlet 6 Amps on the same board with other switches.

M & L for point wiring complete with 2.5 Sqmm PVC insulated unsheathed single core multi standed copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed on walls/ in existing conduit on ceiling and terminated to sunken box of modular type including white cover plates suitable for fixing switches, sockets etc including 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly and taking down old one complete all as specified and directed.

S & F modular switch one way 6 Amps 1 module complete all as specified and as directed.

S & F modular switch one way 16 Amps 1 module complete all as specified and as directed.

S & F Modular stepped type electronic fan regulator 120 W flush type on the existing phenolic laminated sheet etc. as required including removal of existing unsv one all as specified and directed.

S & F modular socket out let 6 Amps 230 volts AC 3 pin multipurpose type complete all as specified and as directed.

S & F modular socket out let 6/16 Amps multipurpose complete all as specified and as directed.

S & F lamp holders insulated PVC/polycarbonate type with back plate suitable for batten/angular complete all as specified and as directed.

S & F ceiling rose two to three terminal surface backelite type AC 50Hz 230 volts complete all as specified and as directed.

S & F wall mounted LED 18/20 watts 6500 K with out put of 1800 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with integral LED tube 4' x 18 watts including removal old existing unsv tube light fitting complete all as specified and as directed.

S & F MCB single pole 5 Amps to 40 Amps complete all as specified and as directed.

S & F in replacement sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including refixing / fixing of incoming & outgoing MCBs and making smooth the wall surfaces complete all as specified.

S & F 415V 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity in the DB TPN 16 to 32 Amps complete with connection testing and commissioning all as specified and as directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB single pole 20 Amps complete all as specified and as directed.

S & F in replacement sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including refixing / fixing of incoming & outgoing MCBs and making smooth the wall surfaces complete all as specified.

M & L for submain wiring concealed with single core PVC insulated FRLS multistranded copper conductor cable of size 2 x 4.0 Sqmm drawn into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 4.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire incl taking out old wire complete all as specified and as directed.

S & F air circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting all necessary accessories including removal of old ceiling fan complete all as specified and as directed.

M & L for earthing complete with GI earth plate electrode 600 x 600 x 6mm buried directly in ground vertically to a depth of not less than 2.25mtr below ground level than 1.5mtr below ground level connected to GI earth wire 4mm dia by means of bolts washers etc made out of GI earth wire will be protected by galvanized iron pipe medium grade 15mm bore up to main distribution board/main switch including necessary excavation and earth work PCC 1:3:6 type CI (using 20mm graded stone aggregate) RCC cover 1:2:4 type B1 including necessary reinforcement etc complete all as shown in electric plate No.3 of MES Sch Part-I., as directed by Engineer-in-Charge. Note : Earth work shall be deemed to be included in the quoted rate.

M & L 3-layer 25mm outer dia PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN16) UV stablized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors complete all as speciifed and as directed.

M & L for 25 mm dia PP-R gate valve, brass ball valve, gunmetal non-returning valve in PP-R pipe line including sockets, unions, elbows, reducers complete all as specified and as directed

Supply only Rotational moulded polyethlene water storage tanks Two layer capacity of 500 ltr (cylindrical vertical with closed top) complete all as specified and as directed.

Supply only 25mm bore dia ball (Float) valve, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 25mm bore dia including all fittings complete all as specified and as directed.

M/S Sudhir Kumar Gupta (BID ID -3443943)