Loading…
Loading…
Tender Value
₹11.6 L
EMD Value
₹23,200
Closing Date
25 Jun 2026, 3:01 pmClosed
Mr.Amit Thakur (e.o) chewada
executive officer
CHEWADA
Mr.Amit Thakur (e.o ) chewada
Executive officer
NAGAR PANCHYAT CHEWADA KE WARD NO-08 ME DR SAJID KE GHAR SE BINODI YADAV KE GHAR ,KAMLA HALWAI KE GHAR SE ASHRAF KE GHAR HOTE HUE AFROZ KE GHAR TAK 05 HP BOARING SAHIT 125 GHAR MDPE DENE EVAM NAL-JAL CONNECTION KA KARYA (PUNARNIVIDA)
134133
NIT-02/2026-27 GR-03 NP CHEWADA
Open Tender
CIVIL
Sheikhpura
• GST NUMBER
• PAN
• DEPARTMENT REGISTRATION NUMBER
• CHARACTER CERTIFICATE
CIVIL
PERCENTAGE
L1
1
8 documents required · 8 mandatory
₹2,500
Processing Fee: 590
₹23,200
NAGAR PANCHYAT CHEWADA
17 Jun 2026
17 Jun 2026
27 Jun 2026
18 Jun 2026
25 Jun 2026
18 Jun 2026
25 Jun 2026
BOQ FOR THE PIPE LINE WORK AND HOUSE WORK AND 5 HP MOTOR WORK IN WARD NO 8 UNDER NAGAR PANCHYAT CHEWARA
SL. NO ITEM NO ITEM QTY UNIT RATE AMOUNT
1 2.8.1 B.C.D Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 259.28 M3 360.70 93524.00
Nos LENGTH W HIGHT TOTAL
Add 5% Extra for fitting 12.35
TOTAL QTY. 259.28
3 Approved from PHED Providing and laying High Density Polyethyene pipe (HOPE pipe) of 20 mm to 225 mm 00 and pressure 6.0 Kglcm2 and 10 Kg/cm2 sutable for water supply which is available in all standard, like 181·498411995 and various grades like PE·80, PE·100 including required specials. Rates are inclusive of , all taxes and duties (Exise duty @12.50% &C8T @2'10against Form 'C'), labour cess, contractor profit and overhead charges all complete as per direction of Engineer·in· charge.HDPE pipe of materials grade PE100· PN10 (dia in I _. mm)
Nos LENGTH W HIGHT TOTAL
4 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 233.36 M3 123.90 28912.81
Nos LENGTH W HIGHT TOTAL
deduction 10% item no.1 233.36
5 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 1.00 Nos 7210.00 7210.00
Nos LENGTH W HIGHT TOTAL
6 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore 2.00 Nos 2227.60 4455.20
7 11.72 B.C.D Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 190.00 M2 283.30 53827.00
Nos LENGTH W HIGHT TOTAL
TOTAL QTY. 190.00
8 4.1.3 B.C.D Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 28.50 M3 3998.10 113946.00
AREA HIGHT TOTAL
9 15.2.1 DEMOLISHING OF PCC 240 0.52 0.15 18.72 M3 970.90 18175.25 MATERIAL STATEMENT
9 CARRIAGE OF MATERIAL 410872.16
(ii) LOCAL SAND 2.70 M3 326.80 882.00
(iii) COURSE SAND 12.83 M3 1019.72 13083.00 SL. NO. ITEM QTY. UNIT CEMENT C. SAND S. CHIPS L. SAND BRICKS
(iv) STONE CHIPS 25.65 M3 497.74 12767.00 2 100A BRICK FLAT SOLING 190.00 M2 _ _ _ 2.70 6133
10 EXTRA COST OF BRICK 6133 %O 369.27 2265.00 TOTAL QTY. 9.12 12.83 25.65 2.70 6133
SEIGNIORAGE FEE
LOCAL SAND 2.70 M3 141.85 383.00
COARSE SAND 12.83 M3 175.80 2255.51
STONECHIPS 25.65 M3 556.33 14269.86
10% OF SEIGNIORAGE FEE 4932.13
TOTAL 549,047.85
house hold connection. 125NOS
SL. NO ITEM NO ITEM QTY UNIT RATE AMOUNT
1 1A Providing and fixing MDPE (PE 80 GradeCompound) pipes PN-12.5 (12.5kglSqcm) as per ISO 4427 and specification for waterapplication rates are inclusive of, taxes and duties (Exise duty @12.50% &CST @2% against Form 'C'), labour cess, contractor profit and overhead charges all complete asper direction of Engineer-in-charge,complete. 6.00 m 28.00 168.00
MDPEPipe 20mm dia nominal bore
2 1B Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes. having thermal stability for hot & cold water supply. including all CPVC plain & brass threaded fittings. including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 1.00 m 172.00 172.00
15 mm nomanal bore
3 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqrn on plan) including dressing of sides and amming of bottoms. lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil 1.08 m3 360.70 389.56
Nos LENGTH W HIGHT TOTAL
4 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 0.97 M3 123.90 120.43
Nos LENGTH W HIGHT TOTAL
deduction 10% item no.1 0.97
5 1C Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :15 mm nominal bore 1.00 Nos 301.60 301.60
Nos LENGTH W HIGHT TOTAL
6 1D Providing and fixing P.P. Black service Saddle Brass threaded) 1 Nos 400.00 400.00
1E providing and fixing female adopter for adjoining the ferrule to MDPE 1 Nos 75.00 75.00
1F Providing and fixing femeale elbow adopter for adjoining the MDPE pipe 1 Nos 50.00 50.00
7 18.54.1 B.C.D Providing and fixing brass bib cock of approved quality 1.00 M2 434.20 434.00
15 mm nominal bore 1.00
TOTAL QTY. 1.00
PER CONNECTION COST 2,110.59
TOTAL 125 CONNECTION COST 263,823.35
BOARING AND 5 HP MOTOR RS 279157.00
SEIGNORAGE FEE 4932.50
SIGN BOARD AND PHOTO 3500.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT nali gali.pdf
NIT • 0.58 MB
Lt No-579.pdf
NIT • 0.56 MB
paper cutting.jpeg
NIT • 10.10 MB
NIT nali gali.pdf
NIT • 0.58 MB
Lt No-579.pdf
NIT • 0.56 MB
paper cutting.jpeg
NIT • 10.10 MB
GR-03.xlsx
NIT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .