REPAIR OF INTERNAL WIRING CEILING FAN EXHAUST FAN GEYSERS FITTINGS FIXTURES MAIN DISTRIBUTION BOARDS LIGHT FITTINGS ACCESSORIES CONVERSION WITH LED IN OMQ AND SMQ AREA OF AF STATION FARIDABAD

Amount

Taking Down carefully Copper/aluminium Point Wiring (light, fan,socket or Power) complete,(fittings Such as switches, ceiling roses, pendents, regulators sockets etc, to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer-in-Charge.

Taking Down carefully Copper/aluminium Point Wiring 4.0 sq mm ,removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper / aluminum two core sub main wiring of sizes 6 Sqmm cable any type and removing old material from site and making good disurbed surface complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper / aluminum two core sub main wiring of sizes 4 Sqmm cable any type and removing old material from site and making good disurbed surface complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring in repairs complete with 1.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 volts grade FRLS cable IS-694 marked drawn through and including rigid non metallic PVC heavy duty concealed conduit(min 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.12.5 of SSR Part I ) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends.tees, juction boxes etc fixed concealed in wall/ceiling or surface conduit on ceiling with provision of 2 mm thick pressed steel terminal boxes covered with 3 mm thick plastic laminated white /coloured top cover for mounting switch,socket,fan regulator,industrial socket and all lamp fittings etc including 1.5 sq mm PVC insulated but unsheathed copper conductor FRLS cable,1100 volt grade IS-694 marked as earth contuinity wire for one light point/Fan point controlled by one,one way switch complete all as specified and directed by Engineer-in-Charge.

All as per Item No 5 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed by Engineer-in-Charge.

All as per item No 5 mentioned here-in- before but one three pin 5 Amps socket out let on independant board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed by Engineer-in-Charge.

All as per item No 5 mentioned here-in- before but 15 Amps 3 pin socket outlet on independent board with 2.5 sq mm PVC insulated and sheathed copper conductor with 2.5 sq mm PVC insulated copper conductor single core for continuous earthing complete all as specified and directed by Engineer-in-Charge.

All as per item No 5 mentioned here-in- before but for Single pole and neutral enclosure with 4.0 sq mm PVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single core for continuous earthing complete all as specified and directed by Engineer-in-Charge.

S&F Piano switch in repairs, flush button,single pole,one way 5 Amp complete all as specified and directed by Engineer-in-Charge.

S&F piano switch,in repairs, flush button single pole one way 15 Amp complete all as specified and directed by Engineer-in-Charge.

S&F bell push, in repairs, flush type 5 Amps complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet, in repairs,flush type 2 in 1, 2 pin and 3 pin 5 Amp complete all as specified and directed by Engineer-in-Charge.

S&F socket outlet, in repairs,flush type 2 in 1, 3 pin and 5/15 Amp complete all as specified and directed by Engineer-in-Charge.

S&F stepped type electronic fan regulator, in repairs, flush type on the existing phenolic laminated sheet etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs,ceiling rose surface backlight, 65 x 50 mm two to to three terminals complete all as specified and directed by Engineer-in-Charge.

S&F lamp Angle holder, in repairs, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Bell Multi Music type,240 V complete all as specified and directed by Engineer-in-Charge.

Supply and fix Modular switch 1 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix Modular switch 2 way 6A, 1 module type, 230 volts, ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix Modular Bell push 6A 1 module type, 230 volts, ISI marked complete all as specified and directed by Engineer-in-Charge.Make - As per sample

S & F Modular stepped type electronic fan regulator 2 Module, on the existing phenolic laminated sheet etc complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix Socket, 6A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix Socket 6A/16A - 2/3 pin combined 2 module, multipurpose flush type, ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix Modular switch 1 way 16A, 1 module, multipurpose flush type, ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix 8" x 6" hylem sheet 3 mm thick ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fix 7" x 4" hylem sheet 3 mm thick ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fix 4" x 4" hylem sheet 3 mm thick ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and fix Switch flame proof rotary Type with termination box in LM6, 16A, single pole 250V complete all as specified and directed by Engineer-in-Charge.

Suppply and fix flame proof switch socket & plug combined in LM 6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed by Engineer-in-Charge.

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME 1 module ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME 2 module ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME 3 module ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME 4 module ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME 6 module ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix MODULAR WHITE COVER PLATE WITH FRAME 8 module ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix MODULAR METAL FLUSH BOX 3 module ISI marked complete all as specified and directed by Engineer-in-Charge. Make - As per sample

Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 4"x4" complete all as specified and directed by Engineer-in-Charge.

Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 7"x4" complete all as specified and directed by Engineer-in-Charge.

Supply and fix flushed inside the wall MS sunken box more than 1mm thicknes of size 8"x10" complete all as specified and directed by Engineer-in-Charge.

S&F in repairs,sheet metal enclosure for MCB DB's SPN 240 volts, 8 way with neutral bus bar 200 Amp rated double door type regal grey all as specified and directed by Engr-in-charge.

All as mentioned in item No 41 here in above but 12 ways DBs complete all as specified and directed by Engineer-in-Charge.

All as mentioned in item No 41 here in above but TPN DB, 4 ways DBs complete all as specified and directed by Engineer-in-Charge.

S&F in repairs,Single pole and neutral enclosure with a two pin and earth plug and socketcomplete with one single pole MCB 32 Amp complete all as specified and directed by Engineer-in-Charge.

M&L in repairs,two single core PVC insulated cable with copper conductor multi stranded 6 Sqmm duly drawn through and including concealed PVC conduit uitable size as sub main with continuous earth wire 6 Sqmm size and connecting to common earth dolly complete all as specified and directed by Engineer-in-Charge.(Flexible Copper Wire Used In FRLS)

All as per item No 45 mentioned here-in- before but 4.0 sq mm PVC insulated and sheathed copper conductor with 4 sq mm PVC insulated copper conductor single core for continuous earthing complete all as specified and directed by Engineer-in-Charge.

S&F in repairs MCB SP 6 to 32 Amps 240 Volts."B" grade complete all as specified and directed by Engineer-in-Charge.

S&F in repairs MCB,SP 40 Amps, 240 Volts."B" grade complete all as specified and directed by Engineer-in-Charge.

S&F in repairs MCB,SPN 6-32 Amps, 240Volts,"B" grade complete all as specified and directed by Engineer-in-Charge.

S&F in repairs MCB SPN, 40 Amps, 240Volts ."B" grade complete all as specified and directed by Engineer-in-Charge.

S&F in repairs MCB SPN, 63 Amps, 240Volts."B" grade complete all as specified and directed by Engineer-in-Charge.

S&F in repairs MCB TPN 40 Amps,415Volts ."B" grade complete all as specified and directed by Engineer-in-Charge.

S&F in repairs MCB TPN, 63 Amps,415Volts ."B" grade complete all as specified and directed by Engineer-in-Charge.

S&F in repairs LED bulb 3 watt base cap B- 22/E 14/E 27 cool day lamp candle type complete all as specified and directed by Engineer-in-Charge. Make : Havells or equivalent model of PHILIPS/CGL

S&F in repairs LED bulb 5 watt base cap B- 22/E 14/E 27 cool day lamp candle type complete all as specified and directed by Engineer-in-Charge. Make : Havells or equivalent model of PHILIPS/CGL

S&F in repairs LED bulb 7 watt base cap B- 22/E 14/E 27 cool day lamp candle type complete all as specified and directed by Engineer-in-Charge. Make : Havells or equivalent model of PHILIPS/CGL

S&F in repairs LED bulb 15 watt base cap B- 22/E 14/E 27 cool day lamp candle type complete all as specified and directed by Engineer-in-Charge. Make : Havells or equivalent model of PHILIPS/CGL

Supply and fixing CFL 36 watt, 4 pin type complete all as specified and directed by Engineer-in-Charge. Make : Crompton/Philips/Bajaj.

S&F in repairs,LED tube light batten 22W LED,6000K (4 ft.), 230 volts AC,Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver connector block,lamp etc complete with all accessories, internally pre-wired including twin core twisted flexible copper conductor of suitable size with PF -0.95,THD-10%,driver should be of same make as LED fitting,with in build over voltage ,under voltage and short circuit protection with operating range of 140 volst to 280 volts,isolation LED driver complete all as specified and directed by Engineer-in-Charge.

S&F in repairs,LED tube light batten,12W(+) 2% LED 6000K (2 ft.), 230 volts AC,Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver connector block,lamp etc complete with all accessories, internally pre-wired including twin core twisted flexible copper conductor of suitable size with PF -0.95,THD-10%,driver should be of same make as LED fitting,with in build over voltage ,under voltage and short circuit protection with operating range of 140 volst to 280 volts,isolation LED driver complete all as specified and directed by Engineer-in-Charge.

S&F in repairs,LED false ceiling fittings/wall/roof panel fittings suitable for 2x16 Watt, LED 6000K (4ft), 230 volts AC,suitable for false ceiling/wall/roof , extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver connector block,lamp etc complete with all accessories, internally pre-wired including twin core twisted flexible copper conductor of suitable size with PF -0.95,THD-10%,driver should be of same make as LED fitting,with in build over voltage ,under voltage and short circuit protection with operating range of 140 volts to 280 volts,isolation LED driver complete all as specified and directed by Engineer-in-Charge.

S&F in repairs,LED false ceiling panel fittings ,1x45W/1x40W LED 6000K (2ftx2ft.), 230 volts AC,suitable for false ceiling, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver connector block,lamp etc complete with all accessories, internally pre-wired including twin core twisted flexible copper conductor of suitable size with PF -0.95,THD-10%,driver should be of same make as LED fitting,with in build over voltage ,under voltage and short circuit protection with operating range of 140 volst to 280 volts,isolation LED driver complete all as specified and directed by Engr-in-charge

Supply and fixing LED Lamp 20 Watts with suitable to replace 36/40 Watts FTL,high Efficiency PMMA diffuser soft glare free light complete and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting all as specified and directed. Make- CG model No :LTT8-20 or equivalent to in Philips/Ledvance/Wipro.

Supply and fix 10W LED 6000K 230 V integrated LED Bulk head luminaire fitting of pressure die cast housing with Control driver with efficiency 90 %, Acrylic diffuser & frame with IP 65 protection,including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make Wipro model: LW03-850-XXX-57-XX, or Equivalent in Philips/Ledvance/ Havells/Crompton

Taking down ceiling fan complete any type size from existing location and cleaning body blades etc including greasing,oiling,replacing wornout bearing ,bush and refixing the same at site complete all as specified and as directed by Engr-in-Charge.

All as mentioned in item No 65 here in above but for Exhaust fan 300 mm sweep complete all as specified and directed by Engineer-in-Charge.

All as mentioned in item No 65 here in above but for Exhaust fan 450 mm sweep complete all as specified and directed by Engineer-in-Charge.

All as mentioned in item No 65 here in above but for wall/floor mounted fan 450 mm sweep complete all as specified and directed by Engineer-in-Charge.

Rewinding unserviceable ceiling fan 1200/1400 mm Sweep from site by strip opening,cutting removing the burnt winding from starter cleaning the slots and rewind the same with original guage of super enameled copper winding wire, insulation materials and all accessories & varnishing etc replacement of service wire copper twisted size 23/0.0076 including reassembling the fan complete all as specified and directed by Engineer-in-Charge.

All as mentioned in item No 69 here in above but for Exhaust fan 300 mm sweep complete all as specified and directed by Engineer-in-Charge.

All as mentioned in item No 69 here in above but for Exhaust fan 450 mm sweep complete all as specified and directed by Engineer-in-Charge.

All as mentioned in item No 69 here in above but for wall/floor mounted fan 450 mm sweep complete all as specified and directed by Engineer-in-Charge.

All as mentioned in item No 69 here in above but for wall/floor mounted fan 600 mm sweep complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Capacitor 2.5 mfd suitable for Ceiling Fan/Wall fan/Exhaust Fan complete all as specified and directed by Engineer-in-Charge. Make :-Universal / Havells / Sarda

S&F in repairs Capacitor 3.15 mfd suitable for Ceiling Fan/Wall fan/Exhaust Fan complete all as specified and directed by Engineer-in-Charge. Make :-Universal / Havells / Sarda

S&F in repairs Capacitor 4.0 mfd suitable for Ceiling Fan/Wall fan/Exhaust Fan complete all as specified and directed by Engineer-in-Charge. Make :-Universal / Havells / Sarda

Supply only ball bearing for 1200/1400mm sweep complete all as specified and directed by Engineer-in-Charge. Make;- TATA / SKF/NBC

S&F FR PVC electrical insulation tape,1.8 cm x 25 mtr x0.125 mm thick complete all as specified and directed by Engineer-in-Charge. Make: Anchor/Steelgrip/Pidlite.

S&F ceiling fan down rod 15 mm bore 45 cm long including cutting and threading suitable for hanging of ceiling fan 1200mm/1400mm sweep complete all as specified and directed by Engineer-in-Charge.

S&F ceiling fan down rod 15 mm bore 2 mtr long including cutting and threading suitable for hanging of ceiling fan 1200mm/1400mm sweep complete all as specified and directed by Engineer-in-Charge.

S&F battery 12V 150 AH testing after installation complete all as specified and directed by Engineer-in-Charge. Make - Exide/Amron or equivalent.

S&F battery terminals alongwith clamping arrangements, nut bolts and washers etc suitable for 150/180 AH battery complete all as specified and directed by Engineer-in-Charge.

Supply, install and commissioning sewage submersible cutter pump 7.5 HP including panel with low water safety, temperature safety, over load safety and phase preventer safety complete all as specified and directed by Engineer-in-Charge.

S&L GI tubing medium grade 80 mm bore intrenches/fixing on pole/wall/crossing in drain etc. for protection of UG cable complete all as specified and directed by Engineer-in-Charge.

S&F fuse wire 20 Amps complete all as specified and directed by Engineer-in-Charge.

S&F in Repairs Contactor, (4 Pole AC & DC Control) operational current AC1, 160 Amps,poles composition- 4NO,DC control ref-LP1D80004 of TC complete all as specified and directed by Engineer-in-Charge.

S&F in Repairs Contactor, (4 Pole AC & DC Control) operational current AC1,125 Amps,poles composition- 4NO,DC control ref-LC1DT125A of TC complete all as specified and directed by Engineer-in-Charge.

S&F in repairs,3 pole contractor,40 Amps,2 No+ 2 NC,415 volts AC, confirms to IS/IEC 60947 -4-1 , including after taking out old unserviceable one, complete all as specified and directed by Engineer-in-Charge. Make:- CAT Part No-SS90701 of L&T or equivallent model and make in C&S / CE.

Supply and fix Ventilation fan (300 mm Sweep) with louvers and acessories complete all as specified and directed by Engineer-in-Charge. Make: Standard Model No. Refresh air-DX or equivalent to Havells/USHA

Supply and fix LED out door driver 10 Watt for bollard type fitting complete all as specified and directed by Engineer-in-Charge. Make - Crompton or equivalent.

M&L for earthing complete with copper earth plate electrode 60 x 60mm x6 mm thick burried directly in ground (Earth pit not less than 2.25 mtr deep below in normal ground level with top edgeof the plate not less than 1.5 meter below normal ground level.) the electrode sorrounded by adequate uantity of charcoal dust and salt on all sides and indluding copper earth strip of size 20 x3 mm bolted (with brass/copper bolts, nuts and checknuts) and riveted to metallic bodies of HT/LT equipments etc. Copper earth strip encased in and including 40mm bore GI medium grade pipe with all GI fittings from upper edge ofplate of body of equipment fixed with and including 25 x 6mm FI iron clamps and also including provision of 20mm bore GI medium grade pipe from nottm of earth plate to ground level for watering complet including eath pit in PCC 1:3:6 type C-1,40mm thick precast RCC 1:2:4 type B-0 covr reinforced with 8mm dia TMT steel bars @ 10cm c/c on oth sides and handle, excavaction and earth work in any type of soil and removal upto 50mtr, watering arrangements with funnel etc. complete all as specified and directed by Engineer-in-Charge and shown in electricplate No 5 of SSR -2009.

Taking down storage water heater 25/50 ltrs capacity from wall for repair/replacement of unserviceable parts and refixing with fasterners Nuts and washers the same after repair work complete all as specified and directed by Engineer-in-Charge.

Supply only Air release valve for 25 Ltrs capacity of existing type and make complete all as specified and directed by Engineer-in-Charge.

Supply only Fusible lead nut/safety valve for safety pressure of existing type complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of thermostate 0-60 degree as per sample in water geyser 25/50 litre capacity ISI complete all as specified and directed by Engineer-in-Charge. Make:- Dits/Theeta/Pearl

M&L for replacement of heating element 1.5KW,Triangular/round type as per sample complete all as specified and directed by Engineer-in-Charge. Make:-Dits/Theeta/Pearl

M&L for replacement of heating element 2 KW Triangle/Circular type as per sample complete all as specified and directed by Engineer-in-Charge. Make:-Dits/Theeta/Pearl

Material and Labour for disconnecting from electric and water mains and dismantling the unserviceable gyeser base assembly and replacing the new base assembly with rubber gasket for 25 Ltrs capacity of any make and refixing in original place including recoonecting of electric and water supply mains including testing complete all as speicifed and directed by Engr-in-charge.

M&L for painting of geyser outer with two coat of synthetic enamel paint of approved colour including scraping out old paint of surface and preparation and writting of MES No complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of geyser tank stainless steel suitable for 25 Ltr capacity geyser complete all as specified and directed by Engineer-in-Charge.

M&L for replacement of PVC connection with brass inserts suitable for hot/cold water, 60 cm long (for hot and cold water inlet and outlet) having nuts with washer complete all as specified and directed by Engineer-in-Charge.

Dismantling and opening storage tank of geyser 25/50 litre capacity to identify the leakage ,repair the spot by suitable welding carefully including making good insulating material, assembling and testing complete all as specified and directed by Engineer-in-Charge.

Saini Enterprises

MAHABIR SINGH

Parveen Builders