WBPWD/EE/PMED/NIQ-36/e-Q /2022-2023 (4th Re-Tender)

Amount

SITC of LED Illumination sign board fabricated by 12' x 4' (ft) x 4" (inch) depth ACP box supported with 1"x1" MS hollow square pipe or Aluminum Hollow square pipe of 18 swg all around. The 3 mm ACP facial should be provided with Laser cutting 6 mm thick acrylic letters out of which 50 mm rising from the surface of the ACP board 6 mm letters should be fixed on another 3 mm acrylic sheet on back side of the ACP facial. Border line of the front portion and back portion should be covered by 1.5" Aluminum channel as per the direction of EIC. The sign board should be glow from back side of letters by 1.5 W / 2.0 LED 2 /3 / 4 module cool white in colour including 12V 250W power supply and LED must be covered in box made of 3 mm thick sun board. 4" width part of the four side of board should be covered by ACP after bending excess part from front side. Back side of the board should be covered with 20 swg Al sheet to protect rain water. The sign board should be fixed on parapit wall of the building with necessary arrangement. Colour of ACP & letter will be as per direction of EIC. The cost of transportation and scaffolding charges are included. The sign board should be as perdirection of EIC. 1st row lettering will be 6" each and 2nd row lettering will be 4" each( Make of Moduler light :- Samsung/Phillips) "COURT OF THE ADDITIONAL CHIEF JUDICIAL MAGISTRATE, DANTAN, PASCHIM MEDINIPUR"

Supplying and fixing 2 Way MCB SS enclosure with IP-20/30 protection, powder coated incl. S & F of 16A DP MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.

Supply and delivery only GI pipe TATA-M 80 mm dia

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly (i)Size 0.6x0.6x1.70 mts

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting withanti corrosivepaint

Supply & Delivery of 2core 10sq. mm. 1.1 kv.gr. XLPE insulated as per IS 7098 (part 1) 1988 armoured sheathed Aluminium conductor cable. [Make - Polycab/ Havells/ Gloster/ KEI]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish. 2 core 10 sqmm 1.1Kv grade XLPE insulated Al/A cable.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC & finishing the end of the following XLPE/PVC armoured cables by crimping method incl S & F solderless socket ( Dowels Make) with tapes, anticorrosive paste & jointing materials. d)2 core 10 sqmm 1.1Kv grade XLPE insulated Al/A cable.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By ISI-Medium GI pipe

Excavation of soil for installation of Earth Electrode and filling & ramming. (for soft soil)

S T ENTERPRISE

ROY SONS ELECTRICAL ENTERPRISE

Messrs HI- Q - ENTERPRISE

M/s Singh Electrical Works