For Upgradation, Supply and Installation of Electrification Work, Machinery, Testing Equipment and TF Oil Protection and Filling Service Station at workshop (Mainpuri, Etah and Banda) under EWD, Agra/Aligarh/Banda

For Upgradation at workshop Mainpuri

Main LT Distribution Pannel

Compartmentalized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendible cubical with dully powder coated and required chemical process with 500A TPN Aluminum bus bar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing bus bar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L2100mm x H1800mm x W500mm approx..)

MAIN INCOMER FROM 250KVA Transformer

400 Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(ABB/C&S/Schneider)

Extended Rotary Handle for operating mechanism (ABB/C&S/Schneider)

Spreader link (Set of 4 Pcs.) (ABB/C&S/Schneider)

Phase Barriers (ABB/C&S/Schneider)

Multifunction Meter CL-1 (Rishabh/C&S/Schneider/Procom)

CT's 400/5A,15VA,Cl-1.0 Cast resin (Rishabh/Procom/C&S/Mediatec)

ON/OFF /TRIP Indicator Lamp (schneider/mediatec/c&s/Abb)

R,Y,B Phase Indication Lamp (Schneider/MEDIATEC/C&S/ABB)

MCB In =6Amp, SP, 10kA for Control (ABB/C&S/Schneider/HPL)

ON/OFF /TRIP Indicator Lamp (schneider/mediatec/c&s/Abb)

CT shorting link (Rishabh/Procom/Mediatec/Connectwell)

SHUNT release (scneider/HPLc&s/ABB)

OU,OV.PHASE UB,SPP SYSTEM ON MAIN INCOMER (PROCOM/MINILEC/L&T)

OUTGOING FOR SUB DISTRIBUTION PANEL

320 Amp, 36kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(ABB/C&S/Schneider)

Extended Rotary Handle for operating mechanism (ABB/C&S/Schneider)

Spreader link (Set of 4 Pcs.) (ABB/C&S/Schneider)

Phase Barriers (ABB/C&S/Schneider)

MCCB OUTGOING For STACK YARD MOTROISED CHAIN PULLEY

100Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(ABB/C&S/Schneider)

Extended Rotary Handle for operating mechanism (ABB/C&S/Schneider)

Spreader link (Set of 4 Pcs.) (ABB/C&S/Schneider)

Phase Barriers (ABB/C&S/Schneider)

OUTGOING FOR D.G SET CHARGER

63Amp, 10kA, FP Miniature Circuit Breaker (ABB/C&S/Schneider/HPL)

Power Connector 63Amp (Connectwell/FTC/Mediatec)

MCB OUTGOING FOR SPARE

63Amp, 10kA, FP Miniature Circuit Breaker (ABB/C&S/Schneider/HPL)

Power Connector 63Amp (Connectwell/FTC/Mediatec)

OUTGOING For OUTDOOR LIGHTING

32Amp, 10kA, FP Miniature Circuit Breaker (ABB/C&S/Schneider/HPL/Anchor)

Power Connector 32Amp (Connectwell/FTC/Mediatec)

40Amp Contactor (Schneider/HPL/C&S/ABB)

LDR/Astronomical Programmable Timer (Schneider/Fusi/Legrand/Salec/ABB)

On / Off Indication Lamp (Schneider/MEDIATEC/C&S/ABB)

Start/Stop Push Button (Schneider/C&S/ABB/FTC)

16mm Connector (Connectwell/FTC/MEDITEC/FONIX)

OUTGOING For GUARD ROOM DB

32Amp, 10kA, FP Miniature Circuit Breaker (ABB/C&S/Schneider/HPL/Anchor)

Power Connector 32Amp (Connectwell/FTC/Mediatec)

Sub Electrical Panel

OVEN SUB DB

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Alluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L800mm x H600mm x W200mm aprox.)

INCOMING FOR OVEN SUB DB

200 Amp, 50kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider/HPL/C&S/ABB)

Extended Rotary Handle for operating mechanism (Schneider/HPL/C&S/ABB)

Spreader link (Set of 3 Pcs.) (Schneider/HPL/C&S/ABB)

Phase Barriers (Schneider/HPL/C&S/ABB)

OUTGOING FOR OVEN SUB DB 1,2,3,4

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

FLOOR UTILITY DB

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Alluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure sizeL800mm x H600mm x W200mm aprox.)

INCOMING For FLOOR UTILITY

200 Amp, 36kA FP Moulded Case Circuit Breaker, Thermal Magnetic based with Adjustable Over Current and Short Circuit Protection, Ics=100% Icu, suitable for 415 V AC.(Schneider/HPL/C&S)

Extended Rotary Handle for operating mechanism (Schneider/HPL/C&S/ABB)

Spreader link (Set of 3 Pcs.) (Schneider/HPL/C&S/ABB)

Phase Barriers (Schneider/HPL/C&S/ABB)

OUTGOING For FLOOR UTILITY

32Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

25Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

6 Amp to 32 Amp, 10kA, DP Miniature Circuit Breaker (ABB/C&S/Schneider/HPL/Anchor)

32 Amp 5-Pin Industrial Heavy Duty Plug & Socket (C&S/Schneider/ABB/Anchor)

TESTING EQUIPMENT DB

Compartmentlized Panel Enclosure will be made up of 1.6/1.2 mm MS CRC Prime Sheet folded extendeble cubical with dully powder coated and required chemical process with 500A TPN Alluminium busbar E91-E Grade density 0.80A per sq.mm with all connecting outgoings Busbars, coloured heat shrinkable insulated sleeve, legends, locks, lock key, connectors, smc/dmc non hygroscopic insulators, lugs, wire, ferrules, acrylic transparent insulated sheet, hardware, base, channels, etc. The Earthing busbar will be provide in the panel enclosure. A control panel having switchgear as per below bill of material. (Enclosure size L800mm x H600mm x W200mm aprox.)

INCOMING For TESTING EQUIPEMENT DB

63Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

OUTGOING For TESTING EQUIPEMENT DB

40Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

32Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S/ABB)

16Amp, 10kA, FP Miniature Circuit Breaker (Schneider/HPL/C&S)

CABLE SUPPLY

Supply and laying of Power Cables, Aluminum stranded conductor, XLPE Insulated,cores laid up, pvc / xlpe tape innersheathed, single GI strip Armoured ,extruded pvc type ST2 sheathed,650/1100V grade as per IS 7098 (Part 1) 1988 of following sizes. (Make : KEI / Finolex / R.R KABLE

3.5 * 185sqmm Al, XLPE, arm

3.5c * 95sqmm Al , XLPE, arm

3.5c * 35sqmm Al, XLPE, arm

4c * 16sqmm Al, XLPE, arm

Supply and laying of Copper Cables,Solid Copper conductor,XLPE Insulated,cores laid up, PVC tape innersheathed,Unarmoured/ Single Armoured ,extruded PVC Type ST2 Sheathed, 650/1100 V grade as per IS 7098 (Part 1) 1988 or latest amendment (Make : KEI / Finolex / RR cable

4c x 6 sqmm copper, PVC, Armored /unarm cable

4c x 2.5 sqmm copper, PVC, Armored /unarm cable

2c x 2.5 sqmm copper, PVC, unarm cable

CABLE TERMINATION - Aluminum cables

Arranging all materials like lugs, glands, nut bolts, hardware for termination of the 1.1 KV grade aluminum multi-core cables of the following sizes. The work involves cable glanding using brass plated heavy duty double compression glands, sizing the core leads, removing insulation, fixing suitable crimping type Aluminum lugs by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals. (Make: Hex/Comet/Dowells/MCI)

3.5c * 185sqmm Al, XLPE, arm

3.5c * 95sqmm Al , XLPE, arm

3.5c * 35sqmm Al, XLPE, arm

4c * 16sqmm Al, XLPE, arm

CABLE TERMINATION - Copper cables

Arranging all materials like lugs , glands , nut bolts , hardware , for termination of the 1.1 KV grade copper multi-core cables of the following sizes. The work involves cable glanding using brass plated heavy duty single compression glands, sizing the core leads, removing insulation, fixing suitable crimping type Aluminum lugs/thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals. (Make: Hex/Comet/Dowells/MCI)

4c x 6 sqmm copper, PVC, Armored /unarm cable

4c x 2.5 sqmm copper, PVC, Armored /unarm cable

2c x 2.5 sqmm copper, PVC, unarm cable

CABLE TRAY

Supply, fixing of Perforated type (GI Sheet) cable Tray made of 1.6mm thick sheet steel with all fixing / grouting & hanging arrangement including supply of GI "C" support channels / Steel angle / channel, suspension arrangement with threaded GI rods, anchor bolts / dash fasteners / bolts / nuts etc. as required.(Please note that all "T" Joints and "L" joints shall be Prefabricated type with circular design )

50 mm tray , 1.2mm thick, 25mm collar

100 mm tray , 1.2mm thick, 40mm collar

150 mm tray , 1.2mm thick, 40mm collar

300 mm tray , 1.2mm thick, 40mm collar

CABLE TRAY SUPPORTS

Supply, installation of hangers and supports for Bus duct & cable tray, cable tray of various width in one/two/three or five tier fashion either on one side of the wall or on two sides of the wall/column/truss or at other places as required as per drawing. The work involve fabrication of clamps, hooks, suspension rod or strip painted with two coats of red oxide and one coat afterward with paint as per the approved colour. Before fabricating, the contractor has to get the design approved.

GI ELECRTOD CHEMICAL EARTHING STATION

Supply, Installation, Testing & Commissioning of long life Maintenance Free Electrolytic galvanizes Earthing System. The Electrode shall be of pipe in pipe in strip technology with 3.0 mtr Long, of 40 x 6 mm GI. flat in 60mm dia & minimum 2.0 mm wall thickness GI Pipe, which does not require manual addition of water. The system should be with 60 kg environment friendly mineral filling compound for lowering resistance. The earth station shall be with Suitable Poly-plastic Pit Cover with lockable arrangement. The earth electrode should have capable of bearing fault current of 25kA.

EARTHING CONDUCTORS

Supply, straightening, shaping, laying under ground/ laying on a cable tray/ laying in cement concrete trench the following sizes of hot dipped galvanized iron conductor. The work is inclusive of providing clamping with the trays/ on the sides of the trenches, making joints where ever required and providing the hardwares and the terminating the hardwares and the termination to the equipment/ earthling station/ etc. Make ( Reputed )

25 mm x 6 mm GI flat

32A 5 pin industrial plug &socket with 32 a fp 10 ka c curve MCB with Suitable encloser confirmed to IEC60309-1 &IEC-60309-2 with external impact strength 1K08 plug & socket and MCB (MAKE ANCHOR/l&T)

Electric Oven

For Upgradation at workshop Etah

Oil Protection System:- Oil Transformer pumping Station wit geared pump flame proof motor 1 HP 1440 RPM 3 phase 1 no online oile filter with wall NRV and Pressure Gauge and by pass pipe line with all fittings.

Digital flow meter totalizer with sensor, complete fitting

1 HP 1440 RPM geared pump flame proof 3 phase motor, float valve & ball valve funnel complete fitting 01 No.

40/32/25 NB MS C-class Heavy Duty black pipe ling with bend tee flang and valve underground oil drainage tank to 10 KL storage tank.

Centrifugai mono block pump 1 HP Driven with motor for oil sifting from transformer body to dirty oil underground tank

Saction flexible pipe 10 meter long approx for oil transfer from transformer body & Tank

Flame proof push button starter at multi point in workshop for ON/Off the pumping staion & alarming buzzer of running position of pump at multi point at workshop

Flexible Hige Pressure rubber house pipe 7 Meter Long.

Control panel with main MCB, Rotary Switch, Digital temperature Controller Pilot Lamp hooter & pressure switch for oile delivery pump

Fabrication & erection charges of all pipe line with consumable item (Welding electrodes, grinding wheels & LPG & oxygen gas)

Supply & Erection of Nozzle

Corrosion, painting for preventing for underground pipe line

Electric Oven

Shearing Machine

Tentioner for LT Winding Machine (for Medium Power Tronsformer)

Reel Stand for LT Winding Machine (for Medium Power Tronsformer)

Resistence Meter

Power Analyser with Panel

For Upgradation at workshop Banda

Dismentaling of old horizantal 16 KL tank from RCC grounted plinth including loading, unloading and draining of old oil including cleaning of slaze of old tank.

Modification of existing 16 KL horizantal oil storage tank to be converting 16 KL vertical type oil storage tank (including cutting, welding, febrication work) and sealing of existing 600mm dia hole and cutting new 600mm dia hole on the top of the tank and fitting the flange with blind plate to cover the top and providing 200mm another hole at bottom side for cleaning system of reclaim oil.

Laying work of 16 KL oil tank from hozizontal position to verctical position as per site conditions. All labour, crane, hydra etc. will be arranged by the contructor.

Supply & Installtion of 10 KLVertical Oil tank with 600mm dia hole on top of the tank with flages and blind plate and 200mm hole at be from side for cleaning etc.

Febrication/modification of main hole fitting for oil storage Tank capacity 10/16 KL.

Required civil work with all required material and labour for vertical oil storage tank foundation as per site conditions.

Rubbing, cleaning and painting of Transformer Oil storage Tank Capacity16 KL.

Supply and erection of Nozzale along with hose pipe including complete fitting.

Supply and erection of 1 HP 2800 RPM (cromption/kirlosker/ABB or equalvalent make) geared pump flame proof 3 phase moter, float valve & ball valve funnel complete fitting between underground Oil tank to 16 KL TF Oil Tank.

Supply and erection of 1 HP 1440 RPM (cromption/kirlosker/ABB or equalvalent make) geared pump flame proof 3 phase moter, float valve & ball valve funnel complete fitting with NRV valve and pressure guage & byepass pipe line and connection with all fitting for 10 KL T/F Oil Tank.

Supply and laying 40/32 NB MS black pipe line along with bend, tee, flange and valve for underground oil drainage tank to 16 KL storage tank.

Supply and laying 40/32 NB MS black pipe line along with bend, tee, flange and valve for 10 KL T/F Oil Tank to supply pipe line and connection between 10 KL storage tanks completely.

40/32 NB header with Cl ball valve,flange type and ASA flange Tee, Bend fitting for 10/16 KL Oil storage tanks.

Supply and fixing SPO pump with 1 HP single phase moter Y type strainer wheel valve, bend, flange for reclaim oil unloading from tanker to 10 KL Tanks.

Supply and fabrication of ladder with railing and support on the top of tank for 10 KL and 16 KL Tank.

Civil work with trench for underground pipe line & electric cable through the plant.

Supply and fixing of control panel with main MCB, Rotary Switch, Lamp hooter & pressure switch for oil delivery pumps.

Supply and laying of electrical wiring as per site requirement (All labour, Material etc, will be arranged by the contractor at his own cost)

Febrication & erection charges of all pipe line with consumble item (Welding elecrodes, grinding wheels & LPG & oxygen gas)

Corrosition painting for preventing for underground pipe line.

Supply and laying of 4X25 SQMM LT PVC CABLE

Supply and laying of 4X16 SQMM LT PVC CABLE

Supply and Installation of MCB & FUSE SET( 3PHASE ELECTRIC SUPPLY BOARD)

Supply and Installation of MAIN SWICH BOARD FOR 3PHASE POWER ELECTRIC SUPPLY

R.S ASSOCIATES

M/S GOVIND ENTERPRISES