REPAIR,REPAINTING OF STEEL FURNITURE AND REPAIR, RE-CANNING POLISHING OF WOODEN FURNITURE AT UNIT LINES, MARRIED ACCN AND FURNITURE UNDER GE 869 EWS AT LEIMAKHONG MIL STN

Amount

Schedule 'A'

Removing the existing unserviceable tops from the following tables and supply and fix new top of 18/19 mm thick commercial block board with 1 mm thick plastic laminated sheet fixed on top 4 mm thick teak wood edging shall be provided al-round the top.all as shown on drawing and specified . Table 3'x 2' with drawers FD-224/383

Table 3'x 2' without drawers FD-223/384

Table Centre FD-235/274

Table peg FD-277

Teapoy FD-278

Table dining 4 Persons MAP FD/E6/MAP/03

Table dining 6 Persons FD-239/273

Table dining 6 persons MAP FD/MAP-II/03

Table dining 8 Persons FD-273

Table Writing FD-275

Table office officer wooden WFD-32

Table office clk wooden DB-4120

Table Office clerk steel FD-1004

Table office Officer steel FD-1003

Table office senior officer steel FD-1002

Teapoy Verandah FD-255

Table 900 mm x 600mm with drawer steel FD-1008

Table 900 mm x 600mm without drawer steel FD-1007

Table 900 mm x 900 mm steel FD-1009

Removing the existing unserviceable front and back long rail from the following tables and supply and fix new front and back long rail of teak wood/Hollock/Bonsum size, shape & design as shown on drg All new surfaces shall be two coat of french polish with high gloss finish. Table 3'x 2' with drawers FD- 224/383

Table 3'x 2' without drawers FD- 223/284

Table Centre FD- 235/274

Table peg FD- 277

Teapoy FD- 278

Table dining 6 Persons FD- 239/273

Table Writing FD- 275

Table dining 4 pers MAP FD/E6/MAP/03

Ditto all as per item No 20.00 here-in- above but short side rail. Table Centre -FD 235/274

Table peg -FD277

Teapoy -FD 278

Table dining 6 Persons -FD 239/273

Table dining 8 Persons -FD 273

Table Writing -FD 275

Ditto all as per item No 20.00 here-in- above but Legs. Table 3'x 2' with drawer - FD 224/383

Table 3'x 2' without drawers - FD 223/384

Table Centre - FD 235/274

Table peg - FD 277

Teapoy - FD 278

Table dining 6 Persons - FD 239/273

Table dining 8 Persons - FD 273

Table Writing - FD 275

Table office clk wooden - DB4120

Removing the existing unserviceable front leg from following chair and S&F new teak wood front leg complete all as directed and shown on drg Chair dining FD - 279

All as per Ser No 43.00 but Chair dining MAP - FD/MAPII/05

All as per Ser No 43.00 but Chair Dining Officers (MAP) - FD/MAPII/04

All as per Ser No 43.00 but Chair dining long Back - FD357

All as per Ser No 43.00 but Chair Easy FD 229

Removing the existing unserviceable rear leg from following chair and S&F new teak wood rear leg complete all as directed and shown on drg Chair dining FD -279

All as per Ser No 48.00 but Chair dining MAP - FD /MAPII/05

All as per Ser No 48.00 but Chair Dining Officers (MAP) - FD/MAPII/04

All as per Ser No 48.00 but Chair dining long Back - FD- 357

All as per Ser No 48.00 but Chair Easy FD - FD- 229

Removing the existing unserviceable front rails from following chair and S&F new teak wood front rails complete all as directed and shown on drg Chair dining MAP - FD/MAP II/05

All as per Ser No 53.00 but Chair Dining Officers (MAP) - FD/MAP II/04

All as per Ser No 53.00 but Chair dining long Back - FD357

Removing the existing unserviceable side rails from following chair and S&F new teak wood side rails complete all as directed and shown on drg Chair dining MAP - FD/MAPII/05

All as per Ser No 56.00 but Chair Dining Officers (MAP) - FD/MAPII/04

All as per Ser No 56.00 but Chair dining long Back - FD357

Removing the existing unserviceable stiffiner from following chair and S&F new teak wood stiffiner complete all as directed and shown on drg Chair dining FD FD-279

All as per Ser No 59 but Chair dining MAP - FD/MAP/II/05

All as per Ser No 59.00 but Chair Dining Officers (MAP)-FD/MAP/II/04

All as per Ser No 59.00 but Chair dining long Back FD-357

All as per Ser No 59.00 but Chair Easy FD-229

SOFA SETs (FD-281) & FD/MAP-II/02, Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of 'cool' foam of 32 density 530 mm x 500 mm covered with best quality of tapestry cloth Make - Sleepwell/Kurlon all as shown on drgs and as approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.350/Mtr

SOFA SETs (FD-281) & FD/MAP-II/02, Removing the existing unserviceable leg from Sofa FD-281 and S & F new teak wood/Hollock/Bonsum leg all as shown on drg and directed by Engr- in -Charge.

SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable Arm rest from Sofa FD-281 and S & F new teak wood/Hollock/Bonsum Arm Rest all as shown on drawing and specified .

SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable side rail from Sofa FD-281 and S & F new teak wood/Hollock/Bonsum side rail all as shown on drawing and specified .

SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable bearer from Sofa FD-281 long pieces and S & F new teak wood/Hollock/Bonsum bearer all as shown on drawing and specified .

SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable bearer from Sofa FD-281 single pieces and S & F new teak wood/Hollock/Bonsum bearer all as shown on drawing and specified .

SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable battens from Sofa FD-281 and S & F new teak wood/Hollock/Bonsum battens all as shown on drawing and specified .

SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable front rail from Sofa FD-281 long pieces and S & F new teak wood/Hollock/Bonsum front rail all as shown on drawing and specified .

SOFA SETs (FD-281) & FD/MAP-II/02, Removing existing unserviceable front rail from Sofa single FD-281 pieces and S & F new teak wood/Hollock/Bonsum front rail all as shown on drawing and specified .

Removing the existing unserviceable mirror and S & F new mirror of size 380mm x 760mm and 5 mm thick make modiguard /swastic/saint gobain with back and frame all as specified and shown on drgs including with teak wood support approved quality and shown on drags including with teak wood support. (Table dressing with Mirror Gents, FD- 230)

Removing the existing UNSV drawers and supply & fixing of new drawer as shown on drgs and specified (Table dressing with Mirror Gents, FD- 230)

Removing existing unserviceable plywood portion of back of Mirror and S&F new back made out of 6 mm thick plywood for mirror all as shown on drgs (Table dressing with Mirror Gents, FD- 230/FD/E6)

Removing the existing broken glass shutters and S&F new Glass shutters all as shown on drg (Each glass shutter shall be measured as single unit) (Table dressing with Mirror Ladies, FD-251)

Removing the existing unserviceable Aluminium channel and S & F new Aluminium Channel all as shown on drgs (Table dressing with Mirror Ladies, FD-251)

Removing existing unserviceable plywood portion of back of Mirror and S&F new back made out of 6 mm thick plywood for mirror all as shown on drgs (Table dressing with Mirror Ladies, FD-251)

Removing the existing unserviceable mirror and S&F new mirror 5 mm thick of make modiguard/Saint Gobain with complete frame and back all as shown on drgs . (Table dressing with Mirror Ladies, FD-251)

Removing the existing unserviceable 12mm ply wood from back and S&F new back of table dressing ladies made out of 12 mm thick plywood commercial quality all as shown on drgs and specified. (Table dressing with Mirror Ladies, FD-251)

Chair Dining PVC MAP (FD/MAP-II/05), Removing the unserviceable PVC seat from Chair Dining (MAP) and supply and fix new suprior quality PVC seat. All as shown on drg and as directed by Engr-in-Charge.

Chair Dining PVC MAP (FD/MAP-II/05), Supply & Fixing 1st class hardwood stiffner of size 360 x 30 x25mm in middle of the seat frame fixed appropriately with 04 Nos bamboo pins with both side rail of chair dining all as specified and directed by Engr-in-Charge.

Chair Dining Long Back (FD-357), Taking out old unsv seat from chair dining long back and supply and fixing new 75mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of seat with new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr in charge shall be provided. MAke of foam shall be Kurlon/Sleep well.

Chair Dining Long Back (FD-357), Taking out old unsv back from chair dining long back and supply and fixing new 50mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of back rest with new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr in charge shall be provided. Make of foam shall be Kurlon/Sleep well.

Chair Dining Long Back (FD-357), Removing the unsv PVC shoe from chair dining long back and supply and fixing new PVC shoe superior quality chair dining long back. All as shown on drg and directed by Engr-in-charge.

Chair Dining Officer MAP (FD/MAP-II/04), Taking out old unsv seat from chair dining offr MAP and supply and fixing new 75mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of seat with new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr in charge shall be provided. MAke of foam shall be Kurlon/Sleep well.

Chair Dining Officer MAP (FD/MAP-II/04), Removing the unsv PVC shoe from chair dining officer MAP and supply and fixing new PVC shoe superior quality chair dining offr MAP. All as shown on drg and directed by Engr-in-charge.

Chair Easy Cushioned (FD-358), Taking out old unsv seat from chair easy cushioned and Supply and Fixing new 75mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of seat. And new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr-in-Charge shall be provided. Note:- Make of foam shall be Kurlons/Sleep well.

Chair Easy Cushioned (FD-358), Taking out old unsv back rest from chair easy cushioned and supply and fixing new 50mm thick foam cushion of 32 density shall be fixed on 12mm thick BWR plywood of back rest. And new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr-in-Charge shall be provided. Note:- Make of foam shall be Kurlons/Sleep well.

Chair Easy Cushioned (FD-358), Taking out old unsv arms from chair easy cushioned and S&F new arms as per existing size and shape complete all as specified and as directed by Engr-in-Charge.

Chair Easy Cushioned (FD-358), S&F new rubber/PVC shoes provided to the bottom of legs complete all as specified and as directed by Engr-in-Charge

Preparing the wood surface by scraping and filling bore holes with putty and rubbing by sand paper/Abbrassive cloth throughly smooth and clean off and applying one coat of french polish of the required finishing of Table 3'x2' with Drawer & without drawer FD-248

All as per item No. 92 but Table Dressing Gents FD- 251

All as per item No. 92 Table Dressing Ladies FD- 246

All as per item No. 92 Bed plywood top FD- 244

All as per item No. 92 Chair dining FD- 279

All as per item No. 92 Chair dining JCO/OR PVC (Map) FD/MAP-II/05

All as per item No. 92 Chair Easy FD - 250

All as per item No. 92 Chair writing FD- 233

All as per item No. 92 Chair dining long Back FD- 357

All as per item No. 92 Chair dining officer (MAP) FD/MAP-II/ 04

All as per item No. 92 Peg table, FD- 281

All as per item No. 92 Sofa Set 5 Seater (MAP), FD/ MAP-II/02/ FD-252

All as per item No. 92 Sofa Set single Seater, FD- 281

All as per item No. 92 Table Centre, FD- 239

All as per item No. 92 Table dining 4 persons, FD/ MAP-II/03

All as per item No. 92 Table dining 6 persons (MAP), FD/ MAP-II/01/ FD-239

All as per item No. 92 Table dining 8 persons, FD- 273

All as per item No. 92 Table office clk wooden, DB- 4120

All as per item No. 92 Table office officer wooden, WDF- 32

All as per item No. 92 Table writing , FD- 232

All as per item No. 92 Teapoy, FD- 276

All as per item No. 92 Hat stand with mirror, FD- 362, 223, 233

All as per item No. 92 Chair Easy Cushioned, FD- 357

Removing the existing unserviceable cane from Chairs and recanning of chairs of all sorts i.e. chair writing, chair easy and Stool dressing etc, with best quality of plastic cane Make -Maharashtra/ Swastik Industries of approved make. The plastic cane should be 1.80mm x 0.46 mm for weaving and 3 x 0.60 mm for beading as per Godrej pattern as specified and directed by Engr-in-charge Chair writing FD , FD-280

All as per item No. 115 Chair Easy FD , FD-229

All as per item No. 115 Stool Dressing CB , FD-282

Chair Verandah (FD-19 (M)), Removing the existing unserviceable cane from Chair Verandah and recanning of chair verandah with best quality of Make Maharashtra/Swastik Industries of approved plastic newar 25/50mm wide as per trade pattern all as specified and directed by Engr-in-Charge

Chair Verandah (FD-19 (M)), S&F new hard rubber shoes of appropriate size suitable to chair verandah all as specified and shown on drawing and as directed by Engr in Charge

Chair Writing Steel MAP (FD/E6/MAP/12), Removing the existing unserviceable Seat from chiar writing steel MAP and S&F of new Seat (12 mm th hot pressed ply wood, upholstered with fabric and moulded polyurethane foam with PVC lipping all around to them in all respect of Make : Godrej or equivalent approx size of seat 510 x 470 x 60) to Chair writing steel MAP, all as shown on drg and as directed by Engr-in-Charge.

Chair Writing Steel MAP (FD/E6/MAP/12), Removing the existing unserviceable Back from chiar writing steel MAP and S&F of new Seat (12 mm th hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. The back foam shall be designed with contour lumber support for extra comfort with PVC lipping all around to them in all respect of Make : Godrej or equivalent approx size of seat 510 x 470 x 60) to Chair writing steel MAP, all as shown on drg and as directed by Engr-in-Charge.

Chair Writing Steel MAP (FD/E6/MAP/12), Plate welding-supply and welding 3mm thick 45mm dia MS bottom plate for Chair writing steel MAP all as shown on drawing and as directed by Engr-in-Charge

Chair Writing Steel MAP (FD/E6/MAP/12), Removing the existing unserviceable Arms from Chair writing steel MAP and S&F of new Arms all as shown on drg and as directed by Engr-in-Charge.

Chair CBA Steel With Arms (FD-75 (M)), Removing the existing unserviceable Seat from chiar CBA Steel with Arms and S&F of new Seat made out of teakwood in natural polish with polythene cane in Godrej pattern confirming to IS-5378:94 (type-I.0 and fixing with suitable screw to chair CBA steel with Arms. rest all as shown on drgs and specified.

Chair CBA Steel With Arms (FD-75 (M)), Removing the existing unserviceable Back from chiar CBA Steel with Arms and S&F of new Back made out of teakwood in natural polish with polythene cane in Godrej pattern confirming to IS-5378:94 (type-I.0 and fixing with suitable screw to chair CBA steel with Arms. rest all as shown on drgs and specified.

Chair CBA Steel With Arms (FD-75 (M)), Removing the existing unserviceable Shoes and supply & fixing of new shoe to chair CBA steel with arms.

Chair CBA Steel Without Arms (FD-75 (M)), Removing the existing unserviceable Seat from chiar CBA Steel without Arms and S&F of new Seat made out of teakwood in natural polish with polythene cane in Godrej pattern confirming to IS-5378:94 (type-I.0 and fixing with suitable screw to chair CBA steel without Arms. rest all as shown on drgs and specified.

Chair CBA Steel Without Arms (FD-75 (M)), Removing the existing unserviceable Back from chiar CBA Steel without Arms and S&F of new Back made out of teakwood in natural polish with polythene cane in Godrej pattern confirming to IS-5378:94 (type-I.0 and fixing with suitable screw to chair CBA steel without Arms. rest all as shown on drgs and specified.

Chair CBA Spl With Hand Rest (FD-120 (M)), Removing the existing unserviceable hand rest from Chair CBA Spl With Hand Rest and S&F of new hand rest of Chair CBA Spl With Hand Rest as shown on drgs and specified by Engr-in-charge.

Chair School With Hand Board (FD/E6/MAP/05) Removing the existing unserviceable hand board and S&F of new hand board of Chair School with hand board as shown on drgs and specified by Engr-in-charge.

Chair School With Hand Board (FD/E6/MAP/05) Removing the existing unserviceable PVC Seat and S&F of new PVC Seat of Chair School with hand board as shown on drgs and specified by Engr-in-charge.

Chair School With Hand Board (FD/E6/MAP/05) Removing the existing unserviceable PVC Back and S&F of new PVC back of Chair School with hand board as shown on drgs and specified by Engr-in-charge.

Locker Steel (FD-1029) Removing the existing unserviceable/damage/ broken legs for lockers steel and S&F with a new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and all as specified and shown on drgs in addition to provide rubber pad in 3mm thick to be provided for legs.

Locker Steel (FD-1029) Removing the existing unserviceable/damaged shelves for locker steel and S&F MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker/clips and all as specified and shown on drg.

Locker Steel (FD-1029) Removinf the existing unserviceable/damaged Haps and staple for locker steel and S&F with a new Haps and staple all as approved by Garrison Engineer.

ALMIRAH LARGE (FD-1032,) Removing the existing unserviceable three way locking device and S&F three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah large steel

ALMIRAH MEDIUM/ SMALL STEEL (FD-1031,) Removing the existing unserviceable three way locking device and S&F three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah medium/ Small steel

ALMIRAH LARGE/ MEDIUM/ SMALL STEEL (FD-67, FD-230, FD-1031, FD-1032) Removing the existing unserviceable locks and S&F locks of appropriate size 6 levers with duplicate keys chromium plated Make Godrej (product No 3936) or equivalent as suitable in almirah with suitable fixing arrangement all as directed by Engr in Charge and shown on drgs for almirah large/medium steel. Notes : (i) Unit rate quoted shall include for provision/repairs to back plate cover to key hole back side cover locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately.

ALMIRAH LARGE/ MEDIUM/ SMALL STEEL (FD-67, FD-230, FD-1031, FD-1032) Removing the existing unserviceable handle and S&F new chromium plated handle 125mm long to almirah large/medium/small steel all as specified/directed and shown on drg.

ALMIRAH LARGE/ MEDIUM/ SMALL STEEL (FD-67, FD-230, FD-1031, FD-1032) Removing the existing unserviceable/damaged/ broken legs for almirah large and S&F with a new legs made out of 18 G sheet with applying one coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs.

ALMIRAH LARGE/ MEDIUM/ SMALL STEEL (FD-67, FD-230, FD-1031, FD-1032) Removing the existing unserviceable/damage/broken legs for almirah medium and S&F with a new legs made out of 18 G sheet with applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs.

Table Office Officer Steel (FD-1002) Removing existing unserviceable locks and supply and fixing new one with duplicate keys as existing all as specified and shown on drg. (Make - Godrej or Lico or as approved by GE).

Table Office Officer Steel (FD-1002) Removing of existing unserviceable drawer from table Office Officer steel and supply and fixing new drawer made of 1mm thick CRC sheet all as per drg and specified by Engr-in-charge. The new drawer should be painted with two coat of synthetic enamel paint over a coat of red oxide and colour approved by GE.

Table Office Clk Steel (FD-1004, FD-307) Replacement of unserviceable locks with new one with duplicate keys as existing all as specified and shown on drg. (Make - Godrej or Lico or as approved by GE).

Table Office Clk Steel (FD-1004, FD-307) Removing of existing unserviceable drawer from table Office Clk steel and supply and fixing new drawer made of 1mm thick CRC sheet all as per drg and specified by Engr-in-charge. The new drawer should be painted with two coat of synthetic enamel paint over a coat of red oxide and colour approved by GE.

Chair Computer Revolving (FD/E6/MAP/01) Removing the existing unserviceable Seat from Chair Computer Revolving and S&F of new seat (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethene foam. and PVC lipping all around to them in all respect overall size 510x470x60mm. Make : Godrej or equivalent to Chair computer revolving all as shown on drg and as directed by Engr-in-Charge.

Chair Computer Revolving (FD/E6/MAP/01) Removing the existing unserviceable Back from Chair Computer Revolving and S&F of new seat (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethene foam. The back from shall be designed with contour lumber support for extra comfort with PVC lipping all around to them in all respect overall size 510x470x60mm. Make : Godrej or equivalent to Chair computer revolving all as shown on drg and as directed by Engr-in-Charge.

Chair Computer Revolving (FD/E6/MAP/01) Plate welding-supply and welding 3mm thick 45mm dia MS bottom plate for Chair writing steel MAP all as shown on drawing and as directed by Engr-in-Charge

Chair Computer Revolving (FD/E6/MAP/01) Removing the existing unserviceable Arms from Chair computer revolving and S&F of new Arms to chair computer revolving all as shown on drg and as directed by Engr-in-Charge.

Chair Computer Revolving (FD/E6/MAP/01) Removing the existing unserviceable fibre stem base from Chair computer revolving and S&F of new fibre stem base to chair computer revolving all as shown on drg and as directed by Engr-in-Charge.

Chair Computer Revolving (FD/E6/MAP/01) Removing the existing unserviceable Bottom gas lift hydraulic from Chair computer revolving and S&F of new Bottom gas lift hydraulic to chair computer revolving all as shown on drg and as directed by Engr-in-Charge.

Form w/o Back Steel (FD-77(M) & FD -1027) Preparing the old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by Garrison Engineer on all external and internal surfaces of form w/o back steel as specified and rest as directed by Engr-in-Charge.

Form w/o Back Steel (FD-77(M) & FD -1027) Removing the existing unserviceable Seat from form without back steel and supply & fixing of new wooden made of teakwood in one piece of size 1525mm long 255mm wide and 25mm thick wooden planks bolted to frame with 3mm dia GI nut bolt and washer to form without back steel including preparing wooden surface and polish with french polish, Rest all as per drg and directed by Engr-in-Charge.

Form with Back Steel 6'.0" (FD-77(M), FD -1027 & HFD-2052) Preparing the old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by Garrison Engineer on all external and internal surfaces of form with back steel 6'.0" and rest as specified and as directed by Engr-in-Charge.

Form with Back Steel 6'.0" (FD-77(M), FD -1027 & HFD-2052) Removing the existing unserviceable Seat from form with back steel 6'.0" and supply & fixing of new wooden made of teakwood in one piece of size 1525mm long 255mm wide and 25mm thick wooden planks bolted to frame with 3mm dia GI nut bolt and washer to form with back steel 6'.0" including preparing wooden surface and polish with french polish, Rest all as per drg and directed by Engr-in-Charge.

Form with Back Steel 6'.0" (FD-77(M), FD -1027 & HFD-2052) Removing the existing unserviceable Back from form with back steel 6'.0" and supply & fixing of new back of wooden planks of suitable size to form with back steel 6'.0" including preparing wooden surface and polish with french polish, Rest all as per drg and directed by Engr-in-Charge.

M&L for cleaning/preparing the existing surfaces ie. de-rusting, filling putty, denting of steel surfaces and applying two coats of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish of Chair CBA steel with or without arms, FD- 75 (M)

All as per item No. 157 Chair CBA special with hand rest, FD- 102 (M)

All as per item No. 157 Chair school with hand board, FD/E6/MAP/05

All as per item No. 157 Chair writing steel MAP , FD/E6/MAP/12

All as per item No. 157 Chair CB steel and Chair CBA steel , HFD- 2044, HFD- 2045

All as per item No. 157 Chair Verandah, FD- 256, FD/E6/MAP/II

All as per item No. 157 Ladder for loft, FD- 238

All as per item No. 157 Rack side steel with 3/4 spaces, FD- 1023 & HFD- 2039

All as per item No. 157 Rack shoe steel MAP, FD/E6/MAP/01

All as per item No. 157 Rack side steel 6 tier , F- 1038, FD-106 (M), 129 (M) & HFD- 2039

All as per item No. 157 Stool Steel 315x315x610mm, FD-81 (M)

All as per item No. 157 Table 3'x2' Steel with Drawer, FD- 1008

All as per item No. 157 Table 3'x2' Steel without Drawer, FD- 1007

All as per item No. 157 Table 900x900x760mm Steel (3'x3'), FD- 1009

All as per item No. 157 Trestle Store Room Steel, FD- 1043

All as per item No. 157 Table Office Clerk Steel with Drawers, FD- 1004, HFD- 251

All as per item No. 157 Table Office Officer Steel, FD- 1003, HFD- 2050

All as per item No. 157 Table Senior Officer Steel 1800x1200x760mm, FD- 1002

All as per item No. 157 Table Dining ORs with Aluminium Top, FD- 165 (M)

All as per item No. 157 Locker bedside steel, FD- 1029

All as per item No. 157 Almirah large steel, FD- 67, FD- 1031, HFD- 2055, FD- 1033, HFD- 2060

All as per item No. 157 Almirah medium/small steel- FD-1032, FD-243. HFD-2056, FD-1033, HFD-2056

All as per item No. 157 Book Case Steel Large Glazed- FD- 1028

All as per item No. 157 Bed Stud Iron Hospital FD- 2001, 2002

All as per item No. 157 Bed Hard Steel Offrs

All as per item No. 157 Charpoy MS Square

All as per item No. 157 MNF Set - FD- 145

Bed Hard steel Offrs (FD/E6/MAP/08) Removing of Existing UNSV plywwod and Supply & Fixing of new plywood BWR Grade ISI marked of size 1980 mm x 900 mm with headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge

Bed Hard steel Offrs (FD/E6/MAP/08) Removing the existing unsv particle board of head rest from Bed hard steel and S&F of new prelaminated particle board of 18/19mm to head rest for bed hard steel as per drg and directed by Engr-in-Charge.

Bed Hard steel Offrs (FD/E6/MAP/08) Removing the existing unsv particle board of foot rest from Bed hard steel and S&F of new prelaminated particle board of 18/19mm to foot rest for bed hard steel as per drg and directed by Engr-in-Charge.

Bed Hard steel Offrs (FD/E6/MAP/08) Supply & Fixing new hard rubber shoes of appropriate size suitable to bed hard steel ass as specified and shown on drawing and as directed by Eng-in- charge

Charpoy MS with Plywood Top (FD/MAP-II/01) Removing the existing plywood from Charpoy MS and Supply &Fixing of new plywood BWR Grade ISI marked of size 1980 mm x 900 mm with headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge

Charpoy MS with Plywood Top (FD/MAP-II/01) Supply & Fixing new hard rubber shoes of appropriate size suitable to bed hard steel ass as specified and shown on drawing and as directed by Eng-in- charge

Bed Hard Wooden with Plywood Top(FD-246) Removing the existing unsv plywood from Bed hard wooden plywood top and supply & fixing new plywood BWR Grade ISI marked of size 1980 mm x 900 mm rounded edges on four corner fixed with MS nut & bolt 6mm dia 75 mm length with washer to bed hard wooden with plywood top and all as directed by the Eng-in- charge.

Bed Hard Wooden with Plywood Top(FD-246) Removing the existing unsv head board including legs from bed hard wooden with plywood top and S&F of new head board including leg to bed hard wooden with plywood top and all as directed by Engr-in-Charge.

Bed Hard Wooden with Plywood Top(FD-246) Removing the existing unsv foot board including legs from bed hard wooden with plywood top and S&F of new foot board including leg to bed hard wooden with plywood top and all as directed by Engr-in-Charge.

Bed Hard Wooden with Plywood Top(FD-246) Removing the existing unsv long rail from bed hard wooden with plywood top and S&F of new long rail to bed hard wooden with plywood top as per drg and all as directed by Engr-in-Charge.

Charpoy GI Pipe Plywood top (FD-220) Removing the existing unserviceable plywood from Charpoy GI pipe Plywood top S&F new plywood BWR Grade ISI marked of size 1980 mm x 900 mm rounded edges on four corner fixed with MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge

Charpoy GI Pipe Plywood top (FD-220) Removing the unserviceable/broken check nuts from GI charpoy & supply and fix 6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe all as specified and shown on drawings (Each check nut will be measured as single unit)

Charpoy GI Pipe Plywood top (FD-220) Removing the unserviceable broken 3 way GI elbow from GI charpoy & S&F 32 MM dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each Elbow GI shall be measured as single unit)

Charpoy GI Pipe Plywood top (FD-220) Removing the existing unserviceable/broken long rail from GI charpoy and S&F new long rail of GI tubing medium grade 32 mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in-charge Make- Jindal/Suryapraksh/Zenith/Appolo

Charpoy GI Pipe Plywood top (FD-220) Making short rails obtained from concern item of SCH 'A' above and fixing all as shown as shown on drawing and directed by Engr-in-charge

Charpoy GI Pipe Plywood top (FD-220) Making legs out of unserviceable long/short rails obtained from Concern item of SCH 'A' above including cutting, threading and fixing as shown on drawing and directed by Engr-in-charge

Charpoy GI Pipe Plywood top (FD-220) Plate welding-supply and welding 3mm thick 45mm dia MS bottom plate for GI charpoy leg all as shown on drawing and as directed by Engr-in-Charge (each base plate will be measured as single unit).

Charpoy GI Pipe Plywood top (FD-220) Clamp Welding -supply and welding flat Iron 25 mm x 33 mm mild steel clamps made to shape as shonw in drg shall be welded in GI charpoy leg all as shown on drawing and as directed by Engr-in-Charge (each clamp will be measured as single unit).

KAILASH KUMAR LADHA (BID ID -3373098)

SHARMA ENTERPRISE (BID ID -3375266)

MANI PRASAD GUPTA (BID ID -3374135)