MISC CERTAIN BR REPAIRS INCLUDING SECURITY FENCING, STEEL GATE ETC IN AGE BR-II AREA UNDER GE SAUGOR

Amount

Dismantling posts or struts (wood,steel or RCC ) in natural ground any section including taking out embedded portion and making good disturbed ground complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

Dismantling framed timber scantlings 40 sqcm & over in section, in any position complete all as specified and directed

M&L for brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M&L for PCC in foundations, filling and mass concrete type B2, 1:2:4 (using 40 mm graded stone aggregates) complete all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for rendering 15 mm thick on surface other than fair face of brickwork with CM 1:6 finished even & fair complete all as specified and as directed

M & L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonary / other than fair finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M & L for applying Birla / J. K. wall care white putty 2 mm thick for levelling the surfaces of walls and applying two coat of synthetic distemper over a coat of interior primer including preparation of new wall surfaces of walls complete all as specified and directed

M & L for applying two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls complete all as specified and directed . Make Asian ACE or equivalent make as approved by GE

Surface excavation not exc 30cm deep & averaging 10 cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for site clearance in soft/loose soil complete all as specified and directed.

Excavation in post holes (or similar holes ) each not exc. 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cum, watering and removing, surplus soil to distance not exc, 50 mtr and making good surfaces in soft/loose soil complete all as specified and directed

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed

M&L for PCC in embedding of chain link fencing, rounded or chamfered on edges type B1 (1:2:4) (using 20 mm graded aggregates) including necessary formwork complete all as specified and directed.

S&F angle iron fencing posts including cutting tops to shape as directed, drilling holes, notching for wire ets; flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Supply only 10 mm dia mild steel plain round bar as in line wire for chain link fencing complete all as specified and directed .

Supply only chain link MS galvanized fencing any size or type complete all as specified and directed. Make:-TATA/SAIL/JINDAL

Fixing of chain link fencing including line wires any mesh size & type to any type of standards rail, straining bolts, etc including provision of binding wire including dismantling of old rusted chain link fencing of any thickness or size complete all as specified and directed.

S & F mild steel screw bolts dia of neck 5 to 10 mm dia (machine made) with hexagonal or Square heads at one end and screwed the other or screwed both nds, each screwed end to be fitted with washers and one hexagonal or Square nut, length of bolt n exc. 5 cm complete all as specified and directed

M&L for applying two coat synthetic enamel paint over a coat of red oxide on new steel surface of width or girth exc 10 cm complete all as specified and directed.

M&L for applying two coat synthetic enamel paint over a coat of red oxide on new steel surface width or girth when unconnected with other painting or when painted in different tint complete all as specified and directed.

S&F for galvanized 2 strand 2.00 mm dia steel barbed wire with 2mm dia barbs at 75mm (approx) spacing & straining & fixing to any type of post straining bolts including securing or tying at crossing with and provisions of galvanized mild steel wire staples or steel pins including dismantling of old rusted barbed wire of any thickness or size complete all as specified and directed (Each row of wire to be measured for the purpose of payment, no separate payment shall made for mild steel tying wire staple/pin). Make:-TATA/SAIL/JINDAL

S&F steel work in purlins/rafters/posts with round/rectangula/square hollow mild steel section complete all as specified and directed

S&F Mild Steel plates (Plain or chequred) channels, square cut or notched forming holes, with riveted, bolted, welded attachement conforming to Fe 410 - W (Gde-E-250) quality-B complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long dia of shank 16 to 20 mm complete all as specified and directed

S & F MS screw bolts machine made with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, dia of shank 16 to 20mm and length exc 22.5cm and n exc 30cm complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern with guard film of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling plain or corrugated steel sheeting, any gauge, thickness complete all as specified and directed.

S&F 0.45 mm thick galvalume sheet precoated coloured ridge suitable for profile pattern sheet of make Durashine mfg by TATA blue scope building product or equivalent fixed with self driving screws including dismantling existing damaged corrugated or semi corrugated steel ridge sheets complete all as specified and directed

S&F for mild steel work like flat iron including all necessary drilling,screwing, bolting , reveting & welding, etc and similar work conforming to Fe-290 Gde E-165 for wind ties,gutter strap and frame for cladding complete all as specified and directed

S&F mild steel framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks ,cattle traps & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs fixed with L-type or J-type or cranked hook bolts including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Taking down and refixing Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed..

S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directedcomplete all as specified and directed.

M/s Mohan Singh

maharaja construction and suppliers

anil kumar sahu

pal enterprises

MODI CORPORATION