Tender ID

Tamil Nadu

To Be Opened

Works

Civil Works

Estimate for Meeting table arrangements, Removing refixing of Existing Aluminium partition, Electrical arrangements at Thatchanallu Zone New building.

MAWS

1 Sn High Road Tirunelveli Municipal Corporation | Tirunelveli, Tamil Nadu

Amount: ₹12.7 LCloses: 30 Mar 2026Closed

Timeline

Published24 Mar 2026
Closed30 Mar 2026
Bid Opening30 Mar 2026

Tender Value

₹12.7 L

EMD Value

₹12,700

Closing Date

30 Mar 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

COMMISSIONER TIRUNELVELI

Address

1 Sn High Road Tirunelveli Municipal Corporation

Work Description

Estimate for Meeting table arrangements, Removing refixing of Existing Aluminium partition, Electrical arrangements at Thatchanallu Zone New building.

Tender Information

Tender ID

2026_MAWS_675243_5

Reference Number

67/2025-26

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Location

1 Sn High Road Tirunelveli Municipal Corporation

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

4 documents required · 4 mandatory

Fee/PreQual/Technical/Finance

RequiredONLINE EMD SCAN COPY (.pdf)

RequiredIT SARAL AND AUDITED BALANCE SHEET (.pdf)

RequiredEXPERIENCE CERTIFICATE AND GST REGISTRATION (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹12,700

Important Dates

Last Activity

24 Mar 2026

Published

24 Mar 2026

Bid Opening

30 Mar 2026

Download Starts

24 Mar 2026

Download Ends

30 Mar 2026

Submission Starts

24 Mar 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (0 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply and fixing of wooden Table with best quality of country plywood top finishing with best quality MICA including all cost and convenyance at materials to site and all labours charges etc., complete.
2Supply and Delivery of Executive chair best Quality with Cusion, back rest & Hand holder including all cost and conveyance of materials and all labour charges etc., complete.
3Model 1
4Model 2
5Removing and Refixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962.
6Removing & Refixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.
7Provision for Repair and refixing of Existing AC, Gas filling, Wash water output & Replacement of Motor including all cost of labour charges materials etc complete.
8Supply and fixing of wall mounding fan 400mm sweep including all cost and conveyance of materials and all labour charges etc., complete.
9Supply and fixing of 20W LED Tube Light for T8 Fitting (Single Side)
10Wiring with 2x1.5sqmm PVC unsheated SC.alu.cable of 1100V grade with sutable PVC riged pipe Concealed on wall and ceiling with accessories and in flush with wall with 150mm X 100mm x113mm TW switch box and 5A F.T Switch in flush withwall 3mm thick hylum sheet cover for making good of the Concealed portion with painting of sutable colour and continues earthwire connection of 14 SWG TC wire for Concealed PVC Plug Point (SD 38)

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.51 MB

Work Item Documents

BOQ_811601.xls

BOQ • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Supply and fixing of wooden Table with best quality of country plywood top finishing with best quality MICA including all cost and convenyance at materials to site and all labours charges etc., complete.
2Supply and Delivery of Executive chair best Quality with Cusion, back rest & Hand holder including all cost and conveyance of materials and all labour charges etc., complete.
3Model 1
4Model 2
5Removing and Refixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962.
6Removing & Refixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.
7Provision for Repair and refixing of Existing AC, Gas filling, Wash water output & Replacement of Motor including all cost of labour charges materials etc complete.
8Supply and fixing of wall mounding fan 400mm sweep including all cost and conveyance of materials and all labour charges etc., complete.
9Supply and fixing of 20W LED Tube Light for T8 Fitting (Single Side)
10Wiring with 2x1.5sqmm PVC unsheated SC.alu.cable of 1100V grade with sutable PVC riged pipe Concealed on wall and ceiling with accessories and in flush with wall with 150mm X 100mm x113mm TW switch box and 5A F.T Switch in flush withwall 3mm thick hylum sheet cover for making good of the Concealed portion with painting of sutable colour and continues earthwire connection of 14 SWG TC wire for Concealed PVC Plug Point (SD 38)

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Supply and fixing of wooden Table with best quality of country plywood top finishing with best quality MICA including all cost and convenyance at materials to site and all labours charges etc., complete.

2Supply and Delivery of Executive chair best Quality with Cusion, back rest & Hand holder including all cost and conveyance of materials and all labour charges etc., complete.

3Model 1

4Model 2

5Removing and Refixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962.

6Removing & Refixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

7Provision for Repair and refixing of Existing AC, Gas filling, Wash water output & Replacement of Motor including all cost of labour charges materials etc complete.

8Supply and fixing of wall mounding fan 400mm sweep including all cost and conveyance of materials and all labour charges etc., complete.

9Supply and fixing of 20W LED Tube Light for T8 Fitting (Single Side)

10Wiring with 2x1.5sqmm PVC unsheated SC.alu.cable of 1100V grade with sutable PVC riged pipe Concealed on wall and ceiling with accessories and in flush with wall with 150mm X 100mm x113mm TW switch box and 5A F.T Switch in flush withwall 3mm thick hylum sheet cover for making good of the Concealed portion with painting of sutable colour and continues earthwire connection of 14 SWG TC wire for Concealed PVC Plug Point (SD 38)