Difference type of work in business plan 2024 25 in the area of EDD I Moradabad

Amount

Safe carriage of following material from store center PVVNL to site of work with loading and unloading at both ends.

PCC Pole 8.5 meter long.

V type Cross arm.

Earthing set complete (MS earth rod 20x2500 mm and 06 SWG earthing wire etc.)

11 KV Pin insulator polymaric.

11 KV Disc insulator polymaric.

M.S. Top channel 125x65x2240 mm.

M.S. angle 75x75x6x2028 mm. sq.

XLPE cable 3x185 mm sq.

Dog conductor.

Stay set.

11 KV VCB for o/g CTR 400/200/5A

Cable Jointing kit 3x185 ( Indoor & Outdoor)

11 KV cable Box 3x185 mm sq.

Dropper Channel.

Erection/Fixing & laying/Installation of following materials as per RESPO manual and as per direction to Supervising Engineer (complete in all respect). Work includes the cost of labour,T&P by providing nut, bolt, Stone pad, G.I. Pipe 6" dia and all other acessaries/material for proper completion of work.

For 11 KV Line, Single pole structure 8.5 Mtr. long PCC Poles :- Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole), providing and laying of stone pad (300x300x75mm.) in the bottom of the pit. Erection of support (pole) complete with fixing of 11 KV V-Type cross-arms and all other accessories by providing stone pad, cross arms, holding clamps, f-bracket and nuts & bolts etc. as per RESPO Norms.

For 11 KV Line, Double Pole structure with 8.5 Mtr. long PCC Poles :- Excavation of foundation pit in size of 75x45 cm. having depth of 1/6th of the full length of the support (pole). Erection of support (pole) complete work by fixing of D.P. Clamps and all other accessories. The work includes fabrication work and fixing of cross bracing sets, cutting holes complete work as per RESPO Norms.

Single line support with PCC 8.5 meter long pole with grouting by providing sand, cement and bricks etc. complete work as per RESPO norms.

Double line support with PCC 8.5 meter long pole with grouting by providing sand, cement and bricks etc. complete work as per RESPO norms.

11 KV disc insulator with fitting on pole as per norms.

11 KV pin insulator with pin & nut on pole as per norms.

Fixing of dropper channel on pole as per norms.

Filling stone pad in pits for pole as per norms.

Fixing of Top channel on pole as per norms.

Earthing of pole by MS Earthing rod of 20x2500 mm and 6 swg earthing wire etc.

fixing of clamp for XLPE cable with nuts and bolts.

Fixing of PG clamp for dog with nuts and bolts.

Fixing of Danger board with clamp.

Grouting of support in CC 1:4:6 (cement, sand and 40 mm. brick ballast) grouting will be done in the block of size 45cmx 45cm x 1/6th of full length of the support upto ground level.

XLPE cable over head 3x185 mm sq.

11 KV VCB for o/g CTR 400/200/5A with all connections.

Digging of cable trench in size of 0.45Mtr.x1.05 Mtr.

Laying of 11 KV 3x185 sq.mm. cable in the trench.

Providing 150 mm. sand cushion beneath and 150 mm. above the cable. The cable shall be duly protected by 1st Class Bricks, two on either side and third on top of the cable, laid in the series one after the other.

Refilling and ramming of the left out soil, closing and trench and levelling. Spare cable shall be left in the loop shape at both ends, including providing of all required material and T&P.

G.I. Pipe 6” dia for inserting 11 KV XLPE cable for safety of cable on Single/Double Pole by providing and fixing of MS Clamp, Nuts and Bolts.

M/s Phool Kumar Saxena