Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC KABRAPETH UMRER | UMRER | NAGPUR | MAHARASHTRA | L1 | Accepted-AOC L-1 Being the lowest bidder | |
| 2 | L-2₹2.1 L+₹2,780 (1.31%)Rejected-Finance 02 UMRER PIPLA UDASA APTUR ROAD VILLAGE TOWN APTUR CITY UMRER NAGPUR MAHARASHTRA 441204 INDIA | NAGPUR | MAHARASHTRA | 441204 | L-2 | Rejected-Finance Quoted value higher than L-1 bidder | |
| 3 | L-3₹2.2 L+₹4,651 (2.20%)Rejected-Finance VEKOLI UMRER WARDGAON JILHA NAGPUR MAHARASHTRA 441204 | UMRER | NAGPUR | MAHARASHTRA | 441204 | L-3 | Rejected-Finance Quoted value higher than L-1 bidder | |
| 4 | L-4₹2.3 L+₹16,530 (7.81%)Rejected-Finance 13 GIRADKAR LAYOUT NEAR GRAM PANCHAYAT DHOTARLI UMRER DISTRICT NAGPUR 441204 | UMRER | NAGPUR | MAHARASHTRA | 441204 | L-4 | Rejected-Finance Quoted value higher than L-1 bidder | |
| 5 | L-5₹2.4 L+₹33,036 (15.6%)Rejected-Finance BARWE PS ORMANJHI PO DAHU DISTT RANCHI PIN 835219 JHARKHAND | RANCHI | RANCHI | JHARKHAND | 835219 | L-5 | Rejected-Finance Quoted value higher than L-1 bidder |
Tender Value
₹3.2 L
EMD Value
₹4,100
Closing Date
3 Aug 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SO(C), Umrea Area
O/o AGM Umrer Area, WCL.
Making Temporary shed for E and M department to store material related to FMC Project at Makardhokda Sub Area of Umrer Area.
2023_WCL_284150_2
um4550-civ-0020-2023-24
Open Tender
Civil Works - Others
Item Rate
30 days
Umrer
Please refer tender document
3 documents required · 3 mandatory
₹4,100
10 Aug 2023
24 Jul 2023
4 Aug 2023
25 Jul 2023
3 Aug 2023
25 Jul 2023
25 Jul 2023 - 31 Jul 2023
Amount
Item Description/ Heading
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints and scaffolding etc.complete racking out joints watering
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
Neat cement punning.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Labour Rate)
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
Total impact of GST for the purpose of CTC
SINGH BROTHERS COMPANY
M/s Rudraprashad electricals
Shri RK Varma
Bharat Enterprises
M/S BN ENTERPRISES
stage.html
html • 0.05 MB
techsummary_294202.pdf
PDF • 0.26 MB
finsummary_294202.pdf
PDF • 3.20 MB
AOC1940.pdf
PDF • 2.69 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .