Construction Parallel extension of the existing school building and additional staff quarters work at JNV Nandurbar-I (MH).

2 BOQ NANDURBAR

Name of Work:- Construction Parallel extension of the existing school building and additional staff quarters work at JNV Nandurbar-I (MH).

DSR-2023 Rate DSR-2022 E/M Rate

Sr.No Description of Item (incl. CF 0.973 + CI (incl. CF 0.973+CI NS AMOUNT Total Cost Remarks

Cost of Building Works

Cost of Development Works

Digitally signed by AMIT JAIN

IST Page 1 of 103

BOQ Summary of Buildings

Name of Work:- Construction Parallel extension of the existing school building and additional staff quarters work at JNV Nandurbar-I (MH).

Amount (DSR- Amount (DSR

2023) Civil 2022+GST

S.No Types of Quarters NS AMOUNT Total Cost Building wise

with correction 6.33%) E/M with

factor correction factor

Digitally signed by

IST Page 2 of 103

BOQ- School Building (G+1)

Name of Work:- Construction Parallel extension of the existing school building and additional staff quarters work at JNV Nandurbar-I (MH).

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

1 EARTH WORK -

Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm

on plan) including disposal of excavated earth, lead upto 50m and lift upto

2 2.6 1.5m, disposed earth to be levelled and neatly dressed. -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20cm in depth, consolidating each

4 2.25 deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. cum 130 196.00 204.058 - 26,512 - -

Supplying chemical emulsion in sealed containers including delivery as specified.

Chlorpyriphos/Lindane Emulsifiable concentrate of 20%.

Diluting and injecting chemical emulsion for Post - CONSTRUCTIONAL anti-

termite treatment (excluding the cost of chemical emulsion)

Treatment of soil under existing floors using chemical emulsion @ one litre per

hole, 300 mm apart including drilling 12 mm dia holes and plugging with cement

mortar 1:2 (1 cement :2 coarse sand ) to match the existing floor.

With Chlorpyriphos /Lindane E C. 20% with 1% concentration.

10 4 CONCRETE WORK - - - - -

11 4.1 Providing and laying in position cement concrete of specified grade excluding the - - - - -

cost of cantering and shuttering - All work up to plinth level

12 4.1.8 1:4:8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal cum 102 6,812.00 7,092.041 - 7,22,859 - -

Providing and laying damp-proof course 40 mm thick with cement concrete

13 4.10 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal Sqm 184 410.85 427.740 - 78,704 - -

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3

manufactured sand (zone-III) derived from natural sources : 6 graded stone

aggregate 20 mm nominal size derived from natural sources over 75mm thick

bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and

14 4.17 grouted with fine sand, including necessary excavatin, levelling & dressing & Sqm 280.00 749.30 780.104 - 2,18,429 - -

finishing the top smooth.

16 5.9 Centring and shuttering including strutting, propping etc. and removal of form - - - - -

Foundations, footings, bases of columns etc. for mass concrete. sqm 508 392.15 408.271 - 2,07,471 - -

Walls(any thickness) including attached pilasters, butteresses, plinth and string co

19 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 1,190 927.25 965.369 - 11,48,789 - -

Digitally signed by AMIT JAIN

IST Page 3 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Lintels, beams, plinth beams, girders, bressummers and cantilevers.

Columns, Pillars, Piers, Abutments, posts and Struts

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

22 5.22 placing in position and binding all complete above plinth level. - - - - -

23 5.22.6 Thermo-Mechanically Treated bars of grade Fe- 500D or more. kg 21,353 107.85 112.284 - 23,97,539 - -

Steel reinforcement for R.C.C. work including straightening, cutting, bending,

24 5.22 A placing in position and binding all complete above plinth level. - - - - -

25 5.22A.6 Thermo-Mechanically Treated bars of grade Fe- 500D or more. kg 26,751 107.85 112.284 - 30,03,752 - -

Providing and laying in position ready mixed M-25 grade concrete for reinforced

cement concrete work, using cement content as per approved design mix,

manufactured in fully automatic batching plant and transported to site of work in

transit mixer for all leads, having continuous agitated mixer, manufactured as

per mix design of specified grade for reinforced cement concrete work, including

pumping of R.M.C. from transit mixer to site of laying , excluding the cost of

cantering, shuttering finishing and reinforcement, including cost of admixtures in

recommended proportions as per IS : 9103 to accelerate/ retard setting of

concrete, improve workability without impairing strength and durability as per

direction of the Engineer - in - charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less

cement used as per design mix is payable/recoverable separately).

27 All works upto plinth level - - - - -

28 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 186 9,504.75 9,895.49 - 18,37,335 - -

29 All works above plinth level upto floor V level - - - - -

31 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 233 9,860.40 10,265.76 - 23,88,034 - -

33 6 MASONRY WORK - - - - -

Brick work with common burnt clay F.P.S ( non modular ) bricks of class

34 6.1 designation 7.5 in foundation and plinth - - - - -

Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every

36 6.15 third course of half brick masonry. sqm 104.8 109.11 - - - -

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in

superstructure above plinth level up to floor five level in :

Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt

39 6.44 clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with Metre 59.45 61.89 - - - -

cement mortar 1:4 (1 cement : 4 fine sand).

40 6.45 Half brick masonry with non modular fly ash bricks of class designation 10, - - - - -

conforming to IS: 12894, in superstructure above plinth up to floor V level.

42 8 CLADDING WORK - - - - -

Digitally signed by AMIT JAIN

IST Page 4 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Providing and fixing 18mm thick gang saw cut mirror polished remoulded and

repolished) machine cut for kitchen platforms, vanity counters, window sills ,

facias and similar locations of required size of approved shade, colour and

texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse

sand) with joints treated with white cement, mixed with matching pigment,

43 8.2 epoxy touch ups, including rubbing, curing, moulding and polishing to edges to - - - - -

give high gloss finish etc. complete at all levels.

44 8.2.3 Granite stone slab of all colourand texture expect black,Cherry/ Ruby Red - - - - -

Providing edge moulding to 18mm thick marble stone counters, Vanities etc.

including machine polishing to edge to give high gloss finish etc. complete as

46 8.3 per design approved by Engineer-in-Charge. - -

Extra for fixing marble /granite stone, over and above corresponding basic item,

in facia and drops of width up to 150 mm with epoxy resin based adhesive,

48 8.4 including cleaning etc. complete. metre 24 568.55 591.923 - 14,206 - -

Extra for providing opening of required size & shape for wash basins / kitchen

49 8.5 sink in kitchen platform, vanity counters and similar location in marble / Granite Each 20 978.70 1,018.934 - 20,379 - -

/ stone work including necessary holes for pillar taps etc. Including rubbing and

polishing necessary etc. complete.

50 9 WOOD AND P.V.C WORK - - - - -

Providing and fixing 19 mm thick both side balancing laminationfactory pressed

BWP grade marine ply as per IS : 710 of approved brand

51 9.169 boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary Sqm 2593.15 2,699.754 - - - -

nails,screws etc. complete as per direction of Engineer-incharge

Providing and fixing ISI marked flush door shutters conforming to IS: 2202

(Part I) non-decorative type, core of block board construction with frame of 1st

class hard wood and well matched commercial 3 ply veneering with vertical

52 9.21 grains or cross bands and face veneers on both faces of shutters : - - - - -

53 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary sqm - 2,392.65 2,491.012 - - - -

54 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum sqm - 462.35 481.357 - - - -

depth on all edges of flush door shutters (over all area of door shutter to be

Providing and fixing M.S. grills of required pattern in frames of windows etc.

with M.S. flats, square or round bars etc. including priming coat withapproved

55 9.48 steel primer all complete. - -

56 9.48.1 Fixed to steel window by welding kg 1134.00 219.1 228.107 - 2,58,674 - -

Providing & fixing bright finished brass 100mm mortice latch and lock with 6

levers and a pair of lever handles with necessary screws etc. complete (Best

57 9.76 make of approved quality). Each 40 854.65 889.785 - 35,591 - -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic

58 9.96 coating not less than grade AC 10 as per IS: 1868) transparent or dyed to - - - - -

required colour or shade with nuts and screws etc. complete:

Digitally signed by AMIT JAIN

IST Page 5 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating

60 9.97 not less than grade AC 10 as per IS : 1868 ) transparent or dyed toreqired - - - - -

colour or shade with necessary screws etc.

Providing and fixing aluminium handles ISI marked anodised (anodic coating not

62 9.100 less than grade AC 10 as per IS : 1868) transparent or dyed to required colour - - - - -

or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper ISI marked anodised

(anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed

64 9.101 to required colour or shade with necessary screws etc. complete: - - - - -

Providing & fixing special quality bright finished brass Cupboard or ward robe

locks with four levers including necessary screws etc. complete (best make of

66 9.79 approved quality). - - - - -

68 9.91 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs Each 40 151.5 157.728 - 6,309 - -

with nuts complete.

Providing and fixing magnetic catcher of approved quality in cupboard / ward

robe shutters, including fixing with necessary screws etc. complete.

70 9.114.2 Double strip (horizontal type) Each 40 39.7 41.332 - 1,653 - -

Providing & Fixing decorative high pressure laminated sheet of plain / wood

71 9.127 grain in gloss / matt / suede finish with high density protective surface layer and - - - - -

reverse side of adhesive bonding quality conforming to IS : 2046 Type S,

including cost of adhesive of approved quality.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows

and clerestory windows using wire gauge with average width of aperture 1.4

73 9.135 mm in both directions with wire of dia. 0.50 mm all complete. - - - - -

74 9.135.2 With 12 mm mild steel U beading sqm 1,228.00 1,278.483 - - - -

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat

comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium

carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non

toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter

joints after applying PVC solvent cement and screwed with full body threaded

star headed SS screws having minimum frame density of 750 kg/cum, screw

withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive

strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to

spread of flame of Class A category with property of being termite/borer proof,

75 26.86 water/moisture proof and fire retardant and fixed in position with M.S hold - - - - -

fast/lugs/SS dash fasteners of required dia and length complete as per direction

of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid

for separately).

Digitally signed by AMIT JAIN

IST Page 6 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Note: For WPC solid door/window frames, minus 5 mm tolerance in profile

dimensions on plus side shall be acceptable but no extra payment on this

account shall be made

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid board one side white color and other side of board laminited

with pvc foil of minium 14 micron thickness of approved design pasted with hot

melt adhesive for cup boards,work station and bathroom /kitchen cabinet etc.of

required sizes comprising of virgin polymer of K (value 58-60 (suspension grade

), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk)

and non toxic additives (maximum toxicity index of 12 for 100 gms) having

minimum density of 650 kg/cum and screw withdrawal strength of 1800 N

78 26.89 (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of - - - - -

elasticity 850 N/mm2 and resistance to spread of flame of Class A category with

property of being termite/borer proof, water/moisture proof and fire retardant

and fixing with stainless steel piano hinges /soft close clip on concealed hinges

of required size with necessary full body threaded star headed counter sunk S.S

screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano

hinges/soft clip on concealed hinges and necessary S.S screws shall be paid

80 NS-18 Providing and fixing Magic eye with all respect complete. Each 4.00 - - 164 - - 657.81

Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness, including

hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle

of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or

rigidly fixed together by mechanical means, including M.S. pressed butt hinges

82 10.14 2.5 mm thick with mortar guards, lock strike plate and shock absorbers as - -

specified and applying a coat of approved steel primer after pre-treatment of

the surface as directed by Engineer-in-charge:

83 10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb (Profile E) metre 6 640.20 666.519 - 3,999 - -

84 10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb (Profile B) metre 6 583.30 607.279 - 3,644 - -

85 10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb (Profile C) metre 6 611.75 636.899 - 3,821 - -

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and

cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet,

joints mitred, welded and grinded finish, with profiles of required size, including

86 10.15 fixing of necessary butt hinges and screws and applying a priming coat of - - - - -

approved steel primer.

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block kg 195.20

87 10.15.1 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone 203.225 - - - -

aggregate 20 mm nominal size)

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling

fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S.

88 10.18 sheet with its top surface hacked for proper bonding, top lid shall be screwed Each 24 220.65 229.721 - 5,513 - -

into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed

screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar

bent to shape as per standard drawing.

Steel work welded in built up sections/ framed work including cutting, hoisting,

fixing in position and applying a priming coat of approved steel primer using

structural steel etc. as required.

Digitally signed by AMIT JAIN

IST Page 7 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Structural steel work in single section, fixed with or without connecting plate,

including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer all complete

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash

fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2),

counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve,

91 10.27 including drilling of hole in frame , concrete/ masonry, etc. as per direction of - - - - -

Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,

channels, plates etc., including welding, grinding, buffing, polishing and making

curvature (wherever required) and fitting the same with necessary stainless

steel nuts and bolts complete, i/c fixing the railing with necessary accessories &

93 10.28 stainless steel dash fasteners , stainless steel bolts etc., of required size, on the Kg 594 772.40 804.153 - 4,77,667 - -

top of the floor or the side of waist slab with suitable arrangement as per

approval of Engineer-in-charge, (for payment purpose only weight of stainless

steel members shall be considered excluding fixing accessories such as nuts,

bolts, fasteners

94 11 FLOORING WORK - - - - -

Marble stone flooring with 18mm thick marble stone as per sample of marble

95 11.23 approved by Engineer-in-charge over 20 mm (average) thick base of cement - - - - -

mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry

including rubbing and polishing complete with :

96 11.23.2 Raj Nagar plain - - - - -

97 11.24 Extra for pre finished nosing to treads of steps of marble/granite stone. metre 719.9 749.495 - - - -

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed

98 11.26 with grey cement slurry mixed with pigment to match the shade of the slab, - - - - -

including rubbing and polishing complete with base of cement mortar 1 : 4 (1

cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting,dado and pillars laid on

12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and

jointed with grey cement slurry mixed with pigment to match the shade of the

100 11.27 slabs, including rubbing and polishing complete. sqm 37 2,354.70 2,451.502 - 90,644 - -

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08%

andconforming to IS: 15622, of approved brand & manufacturer, in all

coloursand shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4

coarsesand) jointing with grey cement slurry @3.3 kg/sqm including grouting

thejoints with white cement and matching pigments etc. The tiles must be

101 11.41A cutwith the zero chipping diamond cutter only . Laying of tiles will be donewith - -

the notch trowel, plier, wedge, clips of required thickness, levelingsystem and

rubber mallet for placing the tiles gently and easily.

Double charge vitrified tile polished finish of size

Digitally signed by AMIT JAIN

IST Page 8 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Providing and laying Polished Granite stone flooring in required design and

patterns, in linear as well as curvilinear portions of the building all complete as

per the architectural drawings with 18 mm thick stone slab over 20 mm

104 11.56 (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and - -

jointed with cement slurry and pointing with white cement slurry admixed with

pigment of matching shade including rubbing , curing and polishing etc. all

complete as specified and as directed by the Engineer-in-Charge

105 11.56.2 Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby sqm 3,071.05 3,197.301 - - - -

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved

106 11.21 make and colour using acid and/or alkali resisting mortar bedding, and joints - -

filled with acid and/or alkali resisting cement as per IS : 4457, complete as per

the direction of Engineer-in- Charge.

107 11.21.1 In flooring on a bed of 10 mm thick mortar 1 :4 (1 acid proof cement : 4 coarse - -

108 11.21.1.1 Acid and alkali resistant tile sqm 1,738.15 1,809.605 - - - -

109 11.21.2 In dado/skirting on 12 mm thick mortar 1 :4 (1 acid proof cement : 4 coarse - - - - -

110 11.21.2.1 Acid and alkali resistant tile sqm 1,884.90 1,962.388 - - - -

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard,

jointed with neat cement slurry mixed with pigment to match the shade of tiles,

111 11.20.2 including rubbing and cleaning etc. complete, on 20 mm thick bed of cement SQM 1328.35 1,382.958 - - - -

mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white

112 12 ROOFING WORK - -

Providing and fixing 1 mm galvalume roof sheet AZ-150 ,660 MPA including

113 NS-1 ridge, flashing over lapping etc complete plan area should be measured nothing sqm 700.00 - - 598.01 - - 4,18,605

extra shall be paid for lap, profile. ( valley creast etc)

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm

impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including

cleaning the slab surface with brushes and finally with a piece of cloth lightly

114 12.15 soaked in kerosene oil complete : - -

115 12.15.1 With residual type petroleum bitumen of grade VG -10 sqm 700 166.2 173.032 - 1,21,123 - -

Steel work in built up tubular (round, square or rectangular hollow tubes etc.)

trusses etc., including cutting, hoisting, fixing in position and applying a priming

coat of approved steel primer, including welding and bolted with special shaped

washers etc. complete.

118 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm Each 4 54.7 56.949 - 228 - -

diameter and weighing not less than 440 grams.

119 13 FINISHING WORK - -

120 13.4 12 mm cement plaster of mix : - -

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5

(1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster

1:6 (1 cement : 6 fine sand).

123 13.16 6 mm cement plaster to ceiling of mix : - -

Digitally signed by AMIT JAIN

IST Page 9 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Distempering with1st quality acrylic distemper (ready mixed) having VOC

125 13.41 content less then 50 gram/litre of approved manufacture and of required shade - - - - -

and colour complete to achieve even shade and colour.

New work (two or more coats) over and including water tinnable priming coat

with cement primer having VOC content less then 50 gram/litre .

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone

127 13.47 additives of required shade : - - - - -

128 13.47.1 New work (two or more coats applied @1.43 ltr/10 sqm over and including base Sqm 171.10 178.134 - - - -

coat of water proofing cement paint applied @2.20kg/10sqm)

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than

129 13.48A 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, - - - - -

dirt resistance exterior paint of required shade (Company Depot Tinted) with

silicon additives

130 13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including Sqm 4,860 181.25 188.701 - 9,17,088 - -

priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Painting with synthetic enamel paint of approved brand and manufacture of

131 13.62 required colour to give an even shade : - - - - -

132 13.62.1 Two or more coats on new work over an under coat of suitable shade with SQM 226.25 235.551 - - - -

ordinary paint of approved brand and manufacture

133 13.68 French spirit polishing : - - - - -

134 13.68.1 Two or more coats on new works including a coat of wood filler sqm 446.25 464.595 - - - -

Providing and applying white cement based putty of average thickness 1 mm,

135 13.80 of approved brand and manufacturer, over the plastered wall surface to prepare sqm 6445.60 156.05 162.465 - 10,47,186 - -

the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having

136 13.83 VOC (Volatile Organic Compound ) content less than 50 grams/ litre of - - - - -

approved brand and manufacture, including applying additional coats

wherever required to achieve even shade and colour.

138 ALUMINIUM WORK - - - - -

Providing and fixing aluminium work for doors, windows, ventilators and

partitions with extruded built up standard tubular sections/ appropriate Z

sections and other sections of approved make conforming to IS: 733 and IS:

1285, fixing with dash fasteners of required dia and size, including necessary

filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM

rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including cleat

139 21.1 angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel - - - - -

screws, all complete as per architectural drawings and the directions of

Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for

140 21.1.1 For fixed portion - - - - -

Anodised aluminium (anodised transparent or dyed to required shade according

141 21.1.1.1 to IS: 1868, Minimum anodic coating of grade AC 15) Kg 270 495.05 515.402 - 1,39,158 - -

Digitally signed by AMIT JAIN

IST Page 10 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

For shutters of doors, windows & ventilators including providing and fixing

hinges/ pivots and making provision for fixing of fittings wherever required

including the cost of EPDM rubber / neoprene gasket required (Fittings shall be

142 21.1.2 paid for separately) - - - - -

Anodised aluminium (anodised transparent or dyed to required shade according

143 21.1.2.1 to IS: 1868, Minimum anodic coating of grade AC 15) Kg 120 598.60 623.208 - 74,785 - -

Providing and fixing glazing in aluminium door, window, ventilator shutters and

144 21.3 partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the - - - - -

architectural drawings and the directions of engineer-in-charge. (Cost of

aluminium snap beading shall be paid in basic item):

145 21.3.2 With float glass panes of 5.0 mm thickness(wt not less then 12.5 kg/sqm) sqm 21.00 1,505.25 1,567.131 - 32,910 - -

Providing and fixing double action hydraulic floor spring of approved Providing

and fixing double action hydraulic floor spring of approved brand and

manufacture conforming to IS : 6315, having brand logo embossed on the body

/ plate with double spring mechanism and door weight upto 125 kg, for doors,

including cost of cutting floors, embedding in floors as required and making

146 21.4 good the same matching to the existing floor finishing and cover plates with - - - - -

brass pivot and single piece M.S. sheet outer box with slide plate etc. complete

as per the direction of Engineer-in-charge

With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing machine moulded aluminium covering of approved pattern

& design, made out of machine cut aluminium sheet and machine holed for

receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors,

the fixing on plate in one row on one side of joint only shall be done with

stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including

providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of

200mm centre to 2 mm thick & 15 mm dia , at a staggered pitch of 200mm

148 21.7 centre to centre including drilling holes in the receiving surface and providing - - - - -

expandable plastic sleeves in holes etc. complete as per direction of

Anodised aluminium sheet 2.5mm thick (anodised transparent or dyed to

149 21.7.1 required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Kg 680.55 708.527 - - - -

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work

150 21.8 by providing weather silicon sealant over backer rod of approved quality as per - - - - -

architectural drawings and direction of Engineer-in-charge complete.

Upto 5mm depth and 5 mm width

Digitally signed by AMIT JAIN

IST Page 11 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Providing and laying water proofing treatment in sunken portion of WCs,

bathrooms etc. by applying cement slurry mixed with water proofing cement

comopund consisting of applying: a) First layer of slurry of cement @ 0.488

kg./Sqm mixed with water proofing cement comound @ 0.253 kg./Sqm. This

layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement

152 22.5 @ 0.242 kg./Sqm mixed with water proofing cement comopund @ 0.126 Sqm 144.00 617.05 642.417 - 92,508 - -

kg./Sqm. This layer will be allowed to air cure for 4 hours followed with water

curing for 48 hours. The rate includes preparation of surface, treatment and

sealing of all joints, corners, junctions of pipes and masonary with polymer

Providing and laying in situ five course water proofing treatment with APP

(Atactic Polypropylene) modified Polymeric memberane over roof consisting of

first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding

material @ 1.20 kg/sqm, which shall onsist of blown type bitumen of grade

85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified

Polymeric membrane .0 mm thick of 3.00 Kg/ sqm weight consisting of five

layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on

both sides with polymeric mix and the polymeric mix is protected on both side

with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick

tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine

153 14.87 sand) mixed with 2% integral water proofing compound by weight of cement Sqm 700.00 532.05 553.923 - 3,87,746 - -

over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished

neat (item of laying brick tiles shall be paid for separately).

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm)

with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial

emittance> 0.75 on waterproof and sloped surface of terrace, laid on 20 mm

154 12.55 thick cement sand mortar in the ratio of 1 :4 (1 cement : 4 coarse sand) and Sqm 700.00 1703.95 1,773.999 - 12,41,800 - -

grouting the joints with mix of white cement & marble powder in ratio of 1 :1,

including rubbing and polishing of the surface upto 3 cuts complete, including

providing skirting upto 150 mm height along the parapet walls in the same

155 26.0 NEW TECHNOLOGIES AND MATERIALS - - - - -

Digitally signed by AMIT JAIN

IST Page 12 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Providing and fixing false ceiling at all heights with integral densified calcium

silicate reinforced with fibre and natural filler false ceiling tiles of Size

595x595mm of approved texture, design and patterns as per CPWD

Specification 2019, to be laid in true horizontal level suspended on inter-locking

metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized

@ 120 grams per sqm including both sides)comprising of main-T runners of size

24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm

and secondary intermediate cross-T of size 24x32 mm of length 600mm to

formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised

mild steel items (galvanizing suspended from ceiling usinggalvanised mild steel

items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6

mm dia fully threaded hanger rod upto 1000 mm length and L-shape level

156 26.22 adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size - - - - -

25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into

12x50mm or even bigger size dash fastener if require, fixed with Glavanised

iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed

on periphey wall / partition with the help of plastic rawl plugs at 450mm center

to center and 40 mm long dry wall S.S screws. The workshall be carried out as

per specifications,

Providing and fixing false ceiling at all heights with integral densified calcium

silicate reinforced with fibre and natural filler false ceiling tiles of Size

595x595mm of approved texture, design and patterns as per CPWD

Specification 2019, to be laid in true horizontal level suspended on inter-locking

metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized

@ 120 grams per sqm including both sides)comprising of main-T runners of size

24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm

and secondary intermediate cross-T of size 24x32 mm of length 600mm to

formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised

mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash

157 26.22.1 fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L- sqm 2,207.00 2,297.730 - - - -

shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size

25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into

12x50mm or even bigger size dash fastener if require, fixed with Glavanised

iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed

on periphey wall / partition with the help of plastic rawl plugs at 450mm center

to center and 40 mm long dry wall S.S screws. The workshall be carried out as

per specifications,

158 17 SANITARY INSTALLATIONS - - - - -

Note:-1. All Sanitarty fixture shal be low flow as mentioned below , where flow/

flush rate of fixture shall be equivalent or lesser at 3 bar pressure( lpm/lpf) .

2. water closet flushing cistern (dual flush 3/6) urinals 2 lpm faucets (lavatory

160 ,pantry,health) 6 lpm. - - - - -

161 3.multiple sprinkler system native trees & vegetation shall be used. - - - - -

4.over flow rain water storage & reuse on site of at least 75% of total building

water demand of 2 days shall be provide .

Digitally signed by AMIT JAIN

IST Page 13 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

163 5. Desalting & grease trap system along with the proper flitation for rain water - - - - -

recharging shall be provided.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100

mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern,

including flush pipe, with manually controlled device (handle lever) conforming

to IS : 7231, with all fittings and fixtures complete, including cutting and making

164 17.1.1 good the walls and floors wherever required: White Vitreous china Orissa Each 8 6,767.40 7,045.608 - 56,365 - -

pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing white vitreous china wall hung type European W.C. pan with white

plastic seat and lid with C.P. brass hinges & rubber buffers, 3/6 liters dual flush

type white vitreous china low level flushing cistern fixed directly on W.C. pan

with fittings and brackets complete.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,

166 17.7 32 mm C.P. brass waste of standard pattern, including painting of fittings and - - - - -

brackets, cutting and making good the walls wherever require :

White Vitreous China Wash basin size 630x450 mm with a

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS :

168 17.10 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of - - - - -

fittings and brackets, cutting and making good the walls wherever required :

169 17.10.1 Kitchen sink with drain board - - - - -

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make

171 17.22A and as per the direction of Engineer-in-charge. Each 1.00 1,034.80 1,077.341 - 1,077 - -

Providing & fixing PVC waste pipe for sink or wash basin including PVC waste

172 17.28 fittings complete - - - - -

Providing and fixing 15mm C.P brass Sink Mixer for kitchen sink with swinging

spout complete. Including cutting and making good the walls wherever required

Shower set Providing and Fixing of C.P. Brass Shower set comprising of :One

No. CP brass Single Lever Concealed Diverter .One No. CP brass OH shower

head & Shower Arm One No. CP brass Bath Spout.Including cutting and

176 NS-4 making good the walls wherever required. Each 8 - - 6,285 - - 50,277

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of

177 17.31 approved quality) complete with 6mm thick hard board ground fixed to wooden Each 16 1,607.95 1,674.053 - 26,785 - -

cleats with CP brass screws and washers complete.

178 17.34 Providing and fixing toilet paper holder : - - - - -

Digitally signed by AMIT JAIN

IST Page 14 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Providing and fixing PTMT towel rail complete with brackets fixed to

wooden cleats with CP brass screws with concealed fittings arrangement of

approved quality and colour.

181 17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective Each 12 708.95 738.095 - 8,857 - -

height of 88 mm, weighing not less than 190 gms

Providing and fixing health faucet with 1 m long flexible tube and wall hook

182 NS-5 including all fittings approved quality. Each 2.00 - - 1,412 - - 2,824

183 18.49 Providing & fixing CP brass bib cock of approved quality conforming IS 8931: - - - - -

Providing and fixing C.P. brass long body bib cock of approved quality

185 18.51 conforming to IS standards and weighing not less than 690 gms. - - - - -

15 mm nominal bore

Providing and fixing CP brass angle valve for basin mixer and geyser points of

approved quality confirming IS: 8931:

189 WATER SUPPLY - - - - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

190 18.7 fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes - - - - -

jointing of pipes & fittings with one step CPVC solvent cement and testing of

joints complete as per direction of Engineer in Charge.

191 Internal work - Exposed on wall - - - - -

192 18.7.1 15 mm nominal outer dia Pipes Metre 12 286.80 298.590 - 3,583 - -

193 18.7.2 20 mm nominal outer dia Pipes Metre 12 335.00 348.772 - 4,185 - -

194 18.7.3 25 mm nominal outer dia Pipes Metre 12 401.55 418.058 - 5,017 - -

195 18.7.4 32 mm nominal outer dia Pipes Metre 12 518.75 540.076 - 6,481 - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded

fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing

of pipes & fittings with one step CPVC solvent cement and the cost of cutting

chases and making good the same including testing of joints complete as per

direction of Engineer in Charge.

197 Concealed work, including cutting chases and making good the walls etc. - - - - -

198 18.8.1 15 mm nominal outer dia Pipes Metre 12 497.80 518.265 - 6,219 - -

199 18.8.2 20 mm nominal outer dia Pipes Metre 12 537.60 559.701 - 6,716 - -

Providing and placing on terrace (at all floor levels) polythene water storage

200 18.48 tank of approved brand and manufacture with cover and suitable locking Litre 2000 11.00 11.452 - 22,904 - -

arrangement and making necessary holes for inlet , outlet and overflow pipes

but without fittings and the base support for tank.

Providing and fixing forged brass ball valve of brass body with hard chrome

201 NS-6 plated steel ball inside PTFE (Teflon) seat & ring with chrome plated centre - - - - -

handle with female BSP threads complete in all respects.

Digitally signed by AMIT JAIN

IST Page 15 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

207 Internal work - Exposed on Wall -

215 18.38 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats - - - - -

over a ready mixed priming coat, both of approved quality for new work :

221 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the - - - - -

pipe and making long screws etc. complete (New work) :

229 INTERNAL DRAINAGE - - - - -

Providing and laying cement concrete in 1:2:4 ( 1cement : 2 Coarse sand : 4

graded stone aggregate 20 mm nominal size ) and curing complete, including

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm

231 12.44 diameter and weighing not less than 440 grams. Each 8.00 54.7 56.949 - 456 - -

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC

pipes of min 6 Kg/ Sq cm rating with fitting for waste pipe from fixtures to floor

trap including reduces, enlarger, socket, couplers, bends, tees etc including

fixing at wall/ ceiling level supported by clamp & hangers etc. The work includes

232 NS-7 cutting holes in wall/ floors/ slabs and making good the same with cement

concrete 1:2:4 complete as required.

239 NS-8 Providing & fixing UPVC Floor trap of self cleansing design with CP Jali - - - - -

complete in all respects.

Digitally signed by AMIT JAIN

IST Page 16 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

240 NS-8-1 S-Trap type Floor Trap 110 x 110 mm (Long type-50 mm seal) Each 6.00 - - 777 - - 4,664

241 NS-8-2 P-Trap type Floor Trap 110 x 110 mm (Long type - 50 mm seal) Each 6.00 - - 452 - - 2,711

Providing and fixing cast brass floor clean out plug with suitable insert keys for 664

opening, male threaded joint with GI threaded socket drip seal to soil / waste

242 NS-9 pipe of CI pipe as required complete as per drawing approved sample and Each 4.00 - - - - 2,658

direction of engineer in charge.-100 mm dia

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff

243 19.1 mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) - - - - -

including testing of joints etc. complete :

245 EXTERNAL SEWEGE SYSTEM - - - - -

Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm

on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,

246 2.8 including getting out the excavated soil and disposal of surplus excavated soil as - - - - -

directed, within a lead of 50 m.

Excavating trenches of required width for pipes, cables, etc including excavation

for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m,

including getting out the excavated soil, and then returning the soil as required,

in layers not exceeding 20 cm in depth, including consolidating each deposited

248 2.10 layer by ramming, watering, etc. and disposing of surplus excavated soil as - -

directed, within a lead of 50 m :

249 2.10.1 All kinds of soil. - - - - -

250 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 6 352.15 366.627 - 2,200 - -

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I.

grating brick masonry chamber with water tight C.I. cover with frame of 300

x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame

to be not less than 2.70 kg as per standard design:

253 19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 4 2802.15 2,917.346 - 11,669 - -

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse

sand) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-

III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8

mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm

254 19.7 nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement - - - - -

: 3 coarse sand) finished with floating coat of neat cement and making channels

in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size) finished with a floating coat of neat cement complete as

per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light

255 19.7.1 duty) 455x610 mm internal dimensions, total weight of cover and frame to be - - - - -

not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

256 19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 4 12,770.55 13,295.547 - 53,182 - -

257 19.8 Extra for depth for manholes : - - - - -

259 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 4 8825.4 9,188.212 - 36,753 - -

Digitally signed by AMIT JAIN

IST Page 17 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786

having minimum cross section as 23 mmx25mm and over all minimum length

263 mm and width as 165mm with minimum 112 mm space between protruded

legs having 2 mm tread on top surface by ribbing or chequering besides

necessary and adequate anchoring projections on tail length on 138 mm as per

260 19.16 standard drawing and suitable to with stand the bend test and chemical Each 1 553.70 576.463 - 576 - -

resistance test as per specifications and having manufacture's permanent

identification mark to be visible even after fixing, including fixing in manholes

with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) complete as per design.

261 19.10 Extra depth for circular type manhole 0.91m internal dia (at bottom) with - - - - -

beyond 0.91m to 1.67m.

262 19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 2 7,592 7,903.899 - 15,808 - -

Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes

263 NS-10 confirming to IS: 16098 including all fittings wherever required e.g., tees, - - - - -

bends of any degree, couplings, adapters, plugs, unions etc. and jointing as

manufacturer recommondation etc. including testing of joints etc. complete.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10

268 19.3 graded stone aggregate 40mm nominal size) up to haunches of S.W/RCC pipes - - - - -

including bed concrete as per standard design.

Providing orange colour safety foot rest of minimum 6 mm thick plastic

encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786

having minimum cross section as 23 mmx25mm and over all minimum length

263 mm and width as 165mm with minimum 112 mm space between protruded

legs having 2 mm tread on top surface by ribbing or chequering besides

necessary and adequate anchoring projections on tail length on 138 mm as per

standard drawing and suitable to with stand the bend test and chemical

resistance test as per specifications and having manufacture's permanent

271 19.16 identification mark to be visible even after fixing, including fixing in manholes Each 8 553.7 576.463 - 4,612 - -

with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6

graded stone aggregate 20 mm nominal size) complete as per design.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with

272 19.6 collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 - - - - -

cement : 2 fine sand) including testing of joints etc. complete :

276 19.8 Extra for depth for manholes : - - - - -

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Extra depth for circular type manhole 0.91m internal dia (at bottom) with

280 19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 2 7591.8 7,903.899 - 15,808 - -

Digitally signed by AMIT JAIN

IST Page 18 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Extra depth for circular type manhole 1.22m internal dia (at bottom) beyond

282 19.12.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 2 9861.45 10,266.854 - 20,534 - -

Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) in

284 19.27.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 8 5957.9 6,202.829 - 49,623 - -

285 19.31.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 10 6117 6,368.470 - 63,685 - -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, with modular switch, modular plate,

287 1.10 suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated - - - - -

copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit, 2

way modular switch, modular plate, suitable GI box and earthing the point with

1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as

Wiring for light/power plug with 2x4 Sq.mm FRLS PVC insulated, copper

conductor, single core cable in surface/recessed PVC conduit alongwith 1 No. 4

290 1.12 Sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing Metre 200.00 - 334 359.6519 - 71,930 -

Wiring for light/power plug with 4x4 Sq.mm FRLS PVC insulated, copper

conductor, single core cable in surface/recessed PVC conduit alongwith 2 Nos. 4

291 1.13 Sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing Metre 200.00 - 537 578.2428 - 1,15,649 -

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of

292 1.14 FRLS PVC insulated copper conductor, single core cable in surface/ recessed - - - - -

medium class PVC conduit as required

Supplying and fixing of following sizes of medium class PVC conduit along with

298 1.21 accessories in surface/recess including cutting the wall and making good the - - - - -

same in case of recessed conduit as required.

Supplying and fixing stepped type electronic fan regulator on the existing

301 1.25 modular plate switch box including connections but excluding modular plate etc. Each 40.00 - 369 397.3400 - 15,894 -

Supplying and fixing modular blanking plate on the existing modular plate &

302 1.26 switch box excluding modular plate as required. Each 60.00 - 40 43.0721 - 2,584 -

303 1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & - - - - -

cover plate for modular switches in recess etc as required.

Digitally signed by AMIT JAIN

IST Page 19 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Supplying and fixing suitable size GI box with modular plate and cover in front

on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps

modular socket outlet and 15/16 amps modular switch, connection etc. as

Installation, testing and commissioning of pre-wired, fluorescent fitting /

compact fluorescent fitting of all types, complete with all accessories and tube

etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down

rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated,

copper conductor, single core cable, including providing and fixing phenolic

laminated sheet cover on the fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the

damage, connection, testing, commissioning etc. as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground

312 18.12 complete with G.I. fittings including trenching (75 cm deep)and re-filling etc. as - - - - -

Supplying and fixing following way, single pole and neutral, sheet steel ,MCB

315 2.3 distribution board, 240 volts, on surface/ recess, complete with tinned copper - - - - -

busbar, neutral bus bar, earth bar, din bar, interconnections powder painted

including earthing etc. as required. (But with out MCB/RCCB/ Isolator).

Supplying and fixing following way, horizontal type three pole and neutral, sheet

steel ,MCB distribution board, 415 volts, on surface/ recess, complete with

317 2.4 tinned copper busbar, neutral bus bar, earth bar, din bar, interconnections - -

powder painted including earthing etc. as required. (But with out MCB/RCCB/

supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C Curve, miniature

circuit breaker suitable for inductive load of following poles in the existing MCB

319 2.10 DB complete with connectoin testing and commissioning etc.as required. - -

Digitally signed by AMIT JAIN

IST Page 20 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

supplying and fixing following rating,double pole,240 V,isolator in the existing

321 2.12 MCB DB complete with connectoin testing and commissioning etc.as required. - -

323 2.13 supplying and fixing following rating,four pole,415 V,isolator in the existing MCB - -

DB complete with connectoin testing and commissioning etc.as required.

supplying and fixing following rating,double pole,240 V,residual current circuit

325 2.14 breaker (RCCB),having a sensitivity currrent 30 mA in the eiting MCB DB - -

completed with connection ,teting commisoining etc.as required.

327 EARTHING - -

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories,

and providing masonry enclosure with cover plate having locking arrangement

328 5.2 and watering pipe etc. with charcoal/ coke and salt as required. Each 4.00 - 6855 7,381.4791 - 29,526 -

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as

strip earth electrode, including connection/ terminating with G.I. nut, bolt,

spring, washer etc. as required. (Jointing shall be done by overlapping and with

329 5.9 2 sets of G.I. nut bolt & spring washer spaced at 50mm) Metre 30.00 - 144 155.0595 - 4,652 -

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop

earthing along with existing surface/ recessed conduit/ submain wiring/ cable as

331 FITTING & FIXTURES - -

Supply, Installation, Testing & Commissioning of recessed type down lighter

332 NS-11 complete with lamps & accessories 18 W Philips Model No:DN296B LED 20S- Each 20.00 - - 1,470.79 - - 29,416

6500 PSE WH S2/ Havells Model: INTEGRANEODLR18WLED865S or equivalent

Supply, Installation, Testing & Commissioning of recess type 2x2, 36watt LED

333 NS-12 Light Fixtures complete with lamps & accessories.Philips Model No:RC380B LED Each 15.00 - - 7,295.13 - - 1,09,427

36S/ Havells Model: VENUSNEO2X2PLR36WLED865G2 or equivalent

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star

rated, ceiling fan with Brush Less Direct Current (BLDC)Motor, class of

insulation: B, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit,

safety rope, copper winding, Power Factornot less than 0.9, Service Value

334 19.1 (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM Each 20.00 - 2730 2,939.6700 - 58,793 -

(tolerance as per IS : 374-2019),THD less than 10%, remote or electronic

regulator unit for speed control and all remaining accessories including safety

pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation

resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supplying of approved make Exaust Fan of the following size and its all

335 NS-13 accessories suitable for operation on 230V single phase, 50 Hz, AC supply Each 10.00 - - 2,432.76 - - 24,328

complete as required.-250 mm

336 SUB HEAD-XII :-LIGHTING CONDUCTOR - -

Providing & Fixing of lightning conductor finial, made of 25 mm dia 300 mm

long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I.

337 6.2 base plate including holes etc. complete as required. No. 1 - 518 557.7835 - 558 -

Fixing of lightning conductor finial, single prong at top, with base plate including

338 6.3 holes etc. complete as required. No. 1 - 360 387.6488 - 388 -

Digitally signed by AMIT JAIN

IST Page 21 of 103

DSR-2022 E/M Amount (DSR- Amount (DSR

Item No Rate-DSR.2023 DSR 2022 E/M Rate (incl. CF 2023) Civil 2022+GST

S. No. Description of Item Unit Qty (incl. CF 0.973 Rate -NS NS AMOUNT

(DSR-2023) Rate 0.973+CI with correction 6.33%) E/M with

4.08% ) factor correction factor

Providing and fixing G.I. tape 20 mm x 3 mm thick on parapet or on surface of

339 6.7 wall for lightning conductor complete as required.( For horizontal run) Metre 4 - 126 135.6771 - 543 -

Providing and fixing G.I. tape 20 mm x 3 mm thick on parapet or on surface of

340 6.8 wall for lightning conductor complete as required.( For vertical run) Metre 4 - 197 212.1300 - 849 -

Providing and fixing glazing in aluminium door, window, ventilator shutters and

341 NS-14 partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the Sqm 10 - - 1637.6 16376.0

architectural drawings and the directions of engineer-in-charge. (No extra Cost

)-Laminated Clear Toughned glass -6 mm

342 NS-15 Providing and fixing Granite quadrant of 250 mm dia bathroom corner self with Each 20 - - 415.3 8305.7

all respect complete

Supply, Installation, Testing & Commissioning of flood light 80watt with all

343 NS-16 respect complete. Each 1 - - 7572.4 7572.4

344 NS-17 Providing and fixing Aluminium Ventilator Louvers with 5 mm thick glass with all Sqm 4 - - 4952.5 19810.1

respect complete.

Digitally signed by AMIT JAIN

IST Page 22 of 103

BOQ- Type-III-14-G+3

Name of Work:- Construction Parallel extension of the existing school building and additional staff quarters work at JNV Nandurbar-I (MH).

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

1 2.0 EARTH WORK -

2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means

over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan)

including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth

to be levelled and neatly dressed.

2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of

foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited

4 layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. cum 561.69 196.00 204.058 - - 1,14,617.09 - -

2.27 Supplying and filling in plinth with sand under floors including watering, ramming

5 consolidating and dressing complete. Cum 30.00 2123.75 2,211.057 - - 66,331.72 - -

6 2.28 Surface dressing of the ground including removing vegetation - - - - - -

7 2.28.1 All kinds of soil Sqm - - - - - -

8 2.34 Supplying chemical emulsion in sealed containers including delivery as specified. - - - - - -

9 2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 20.00 234.75 244.401 - - 4,888.01 - -

2.35 Diluting and injecting chemical emulsion for Post - CONSTRUCTIONAL anti-termite

10 treatment (excluding the cost of chemical emulsion) - - - - - -

Along external wall where the apron is not provided using chemical emulsion @ 7.5

11 2.35.1 litres / sqm of the vertical surface of the substructure to a depth of 300mm including - - - -

excavation channel along the wall & rodding etc. complete:

With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

2.35.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole,

13 300 mm apart including drilling 12 mm dia holes and plugging with cement mortar 1:2 - - - - - -

(1 cement :2 coarse sand ) to match the existing floor.

14 2.35.3.1 With Chlorpyriphos /Lindane E C. 20% with 1% concentration. Sqm 400.00 310.05 322.796 - - 1,29,118.46 - -

15 4.0 CONCRETE WORK - - - - - -

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of

cantering and shuttering - All work up to plinth level

17 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cum 70.91 6812.00 7,092.041 - - 5,02,889.56 - -

4.1.10 1:5:10 (1 cement : 5 coarse sand(zone -III) derived from natural soueces : 10 graded

stone aggregate 40 mm nominal size Derived from natural soueces

4.10 Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1

19 cement : 2 coarse sand(zone -III) derived from natural soueces : 4 graded stone Sqm 64.40 410.85 427.740 - - 27,546.46 - -

aggregate 12.5 mm nominal size derived from natural soueces.

4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3

manufactured sand (zone-III) derived from natural sources : 6 graded stone aggregate

20 mm nominal size derived from natural sources over 75mm thick bed of dry brick

20 ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, Sqm 67.50 749.30 780.104 - - 52,657.00 - -

including necessary excavatin, levelling & dressing & finishing the top smooth.

22 5.9 Centring and shuttering including strutting, propping etc. and removal of form for: - - - - - -

23 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 256.08 392.15 408.271 - - 1,04,550.11 - -

24 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 1350.00 927.25 965.369 - - 13,03,248.48 - -

25 5.9.5 Lintels, beams, plinth beams, girders, bressummers and cantilevers. Sqm 324.40 736.40 766.673 - - 2,48,708.85 - -

26 5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 752.40 961.30 1,000.819 - - 7,53,016.25 - -

5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

28 5.22.6 Thermo-Mechanically Treated bars of grade Fe- 500D or more. kg 18866.62 107.85 112.284 - - 21,18,415 - -

5.22 A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

30 5.22A.6 Thermo-Mechanically Treated bars of grade Fe- 500D or more. kg 27600.18 107.85 112.284 - - 30,99,051 - -

5.33 Providing and laying in position ready mixed M-25 grade concrete for reinforced cement

concrete work, using cement content as per approved design mix, manufactured in fully

automatic batching plant and transported to site of work in transit mixer for all leads,

having continuous agitated mixer, manufactured as per mix design of specified grade

for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to

31 site of laying , excluding the cost of cantering, shuttering finishing and reinforcement, - - - - - -

including cost of admixtures in recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement

used as per design mix is payable/recoverable separately).

32 All works upto plinth level - - - - - -

Digitally signed by

ISTPage 23 of 103

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

33 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 168.45 9504.75 9,895.490 - - 16,66,915 - -

34 All works above plinth level upto floor V level - - - - - -

35 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 246.43 9860.40 10,265.761 - - 25,29,794 - -

Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5

6.1 in foundation and plinth

38 6.1.2 Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 27.60 7,132.25 7,425.457 - 2,04,943 -

6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

6.32 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in

superstructure above plinth level up to floor five level in :

6.45 Half brick masonry with non modular fly ash bricks of class designation 10, conforming

to IS: 12894, in superstructure above plinth up to floor V level.

44 8.0 CLADDING WORK - - - - - -

Providing and fixing 18mm thick gang saw cut mirror polished remoulded and

repolished) machine cut for kitchen platforms, vanity counters, window sills , facias and

similar locations of required size of approved shade, colour and texture laid over 20mm

45 8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white - - - - - -

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

46 8.2.3 Granite stone slab of all colourand texture expect black,Cherry/ Ruby Red - - - - - -

Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including

48 8.3 machine polishing to edge to give high gloss finish etc. complete as per design - - - - - -

approved by Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

50 8.4 and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning metre 14.00 568.55 591.923 - - 8,286.92 - -

Extra for providing opening of required size & shape for wash basins / kitchen sink in

51 8.5 kitchen platform, vanity counters and similar location in marble / Granite / stone work Each 14.00 978.70 1,018.934 - - 14,265.08 - -

including necessary holes for pillar taps etc. Including rubbing and polishing necessary

Providing wood work in frames of doors, windows, clerestory windows and other

53 9.1 frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners - - - -

of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing 19 mm thick both side balancing laminationfactory pressed BWP

grade marine ply as per IS : 710 of approved brand

boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws

55 9.169 etc. complete as per direction of Engineer-incharge Sqm 172.80 2593.15 2,699.754 - - 4,66,517.56 - -

9.21 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)

56 non-decorative type, core of block board construction with frame of 1st class hard wood - - - - - -

and well matched commercial 3 ply veneering with vertical grains or cross bands and

face veneers on both faces of shutters :

57 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 17.64 2392.65 2,491.012 - - 43,941.45 - -

9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on

all edges of flush door shutters (over all area of door shutter to be measured).

9.26 Extra for cutting rebate in flush door shutters (Total area of the shutter to be

9.76 Providing & fixing bright finished brass 100mm mortice latch and lock with 6 levers and

60 a pair of lever handles with necessary screws etc. complete (Best make of approved Each 48 854.65 889.785 - - 42,709.66 - -

9.96 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating

61 not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or - - - - - -

shade with nuts and screws etc. complete:

9.97 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less

63 than grade AC 10 as per IS : 1868 ) transparent or dyed toreqired colour or shade with - - - - - -

necessary screws etc.

9.100 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less

65 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade - - - - - -

with necessary screws etc. complete :

9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic

67 coating not less than grade AC 10 as per IS :1868) transparent or dyed to required - - - - - -

colour or shade with necessary screws etc. complete:

Digitally signed by

ISTPage 24 of 103

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

9.79 Providing & fixing special quality bright finished brass Cupboard or ward robe locks with

69 four levers including necessary screws etc. complete (best make of approved quality). - - - - - -

9.91 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with

nuts complete. 151.05

9.114 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe

shutters, including fixing with necessary screws etc. complete.

73 9.114.2 Double strip (horizontal type) Each 96 39.7 41.332 - - 3,967.88 - -

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in

74 9.127 gloss / matt / suede finish with high density protective surface layer and reverse side of - - - -

adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

9.147A Providing and fixing factory made uPVC glazed/wire mesh windows/comprising of lead

free uPVC multi-chambered frame, sash and mullion/coupler (where ever required)

extruded profiles having minimum wall thickness of 1.7 mm for series R1 and R2

profiles and 2.1 mm for series R3 and R4 profiles confirming to EN:12608 in any shape,

colure and design duly reinforced with galvanized mild steel section made of required

shape & size as per CPWD Speifications ,upvc extructed glazing beads ,interlocks and

inline sash adaptor (where ever required ) of appropriate dimension ,EPDM gasket,

stainless steel SS 304 grade fastners of minimum 8 mm dia with countersunk head

,comprising of matching polymade PA6 grade sleeve for fixing frame to finishing wall as

76 per IS 1367 : Part 1 to 14 coated) casement handles, G.I fasteners 100 x 8 mm size - - - -

for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless

steel screws etc. Profile of frame & sash mullion ( if required ) shall be mitred cut and

fusion welded /mechanically jointed duly sealed at all corners, including drilling of holes

for fixing hardware's and drainage of water etc. After fixing frame the gap between

frame and adjacent finished wall shall be filled with weather proof silicon sealant over

backer rod of required size and of approved quality, all complete as per approved

drawing comprising to CPWD Specification & direction of Engineer-in-Charge. section of

steel reinforcement and cross section of UPVC Profile to be as per design approved by

Engineer-in-Charge.

Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without

77 high performance coatings as per design requirements and conforming to IS: 3548 & - - - -

IS: 16231 shall be paid separately

Note:- Structural design proof checked from a Government Engineering Institute, to be

provided by the manufacturer for

79 (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 - - - -

80 (ii) Sites with structure height more than 20m for all wind speeds - - - -

9.147.A1.3 Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm &

81 above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every Sqm 189.00 9628.6 10,024.432 - 18,94,617.60 -

panel along with multi-point locking system (Height above 1.8m)

9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S.

flats, square or round bars etc. including priming coat withapproved steel primer all

83 9.48.1 Fixed to steel window by welding kg 108.00 219.1 228.107 - - 24,635.58 - -

26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers

(wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index

of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and

screwed with full body threaded star headed SS screws having minimum frame density

of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum

compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to

84 spread of flame of Class A category with property of being termite/borer proof, - - - - -

water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS

dash fasteners of required dia and length complete as per direction of Engineer-In-

Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5 mm tolerance in profile dimensions

on plus side shall be acceptable but no extra payment on this account shall be made

Digitally signed by

ISTPage 25 of 103

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

board one side white color and other side of board laminited with pvc foil of minium 14

micron thickness of approved design pasted with hot melt adhesive for cup boards,work

station and bathroom /kitchen cabinet etc.of required sizes comprising of virgin polymer

of K (value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12

for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of

87 26.89 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of - - - - -

elasticity 850 N/mm2 and resistance to spread of flame of Class A category with

property of being termite/borer proof, water/moisture proof and fire retardant and

fixing with stainless steel piano hinges /soft close clip on concealed hinges of required

size with necessary full body threaded star headed counter sunk S.S screws, all as per

direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft clip on

concealed hinges and necessary S.S screws shall be paid separately).

89 NS-18 Providing and fixing Magic eye with all respect complete. Each 12.00 - - 164.45 - - 1,973.42

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured

from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock

jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or

91 10.14 base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical - - - - - -

means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike

plate and shock absorbers as specified and applying a coat of approved steel primer

after pre-treatment of the surface as directed by Engineer-in-charge:

92 10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb (Profile E) metre 2 640.20 666.519 - - 1,333.04 - -

93 10.14.1.1 Fixing with adjustable lugs with split end tail to each jamb (Profile B) metre 2 583.30 607.279 - - 1,214.56 - -

94 10.14.2.1 Fixing with adjustable lugs with split end tail to each jamb (Profile C) metre 2 611.75 636.899 - - 1,273.80 - -

10.18 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan

clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with

its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/

M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners.

Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories & stainless steel dash

fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side

of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for

payment purpose only weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners

10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with

M.S. Flat 15x3 mm and nuts & bolts complete.

10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both

99 11.0 FLOORING WORK - - - - - -

11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by

the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622,

of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick

cement mortar 1 :4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3

kg/sqm including grouting the joints with white cement and matching pigments etc. The

100 tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be - - - - - -

done with the notch trowel, plier, wedge, clips of required thickness, leveling system

and rubber mallet for placing the tiles gently and easily.

101 11.41A.1 Double charge vitrified tile polished finish of size - - - - - -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved

103 11.38 make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 sqm 115.20 1315.3 1,369.372 - 1,57,751.65 -

mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and

matching pigments etc., complete.

Digitally signed by

ISTPage 26 of 103

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

Providing and laying Ceramic glazed Wall tiles of size 600x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved

104 NS-56 make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 sqm 970.56 - - 1453.49 - 14,10,698.75

mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and

matching pigments etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement

mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing

105 11.56 with white cement slurry admixed with pigment of matching shade including rubbing , - - - - - -

curing and polishing etc. all complete as specified and as directed by the Engineer-in-

106 11.56.2 Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red sqm 336.19 3071.05 3,197.301 - - 10,74,889.07 - -

NS-1 Providing and fixing 1 mm galvalume roof sheet AZ-150 ,660 MPA including ridge,

108 flashing over lapping etc complete plan area should be measured nothing extra shall sqm 345.00 - - 598.01 - - 2,06,312.45

be paid for lap, profile. ( valley creast etc)

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm Painting top

of roofs with bitumen of approved quality @ 17kg per 10 sqm

109 12.15 impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the sqm - - - - -

slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil

110 12.15.1 With residual type petroleum bitumen of grade VG -10 sqm 130 166.2 173.032 - 22,494.22 - -

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses

etc., including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer, including welding and bolted with special shaped washers etc.

12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm

diameter and weighing not less than 440 grams.

114 13.0 FINISHING WORK - - - - -

115 13.4 12 mm cement plaster of mix : - - - - -

13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1

117 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 Sqm 860 518.55 539.868 - 4,64,286.13 - -

cement : 6 fine sand).

118 13.16 6 mm cement plaster to ceiling of mix : - - - - -

13.41 Distempering with1st quality acrylic distemper (ready mixed) having VOC content less

120 then 50 gram/litre of approved manufacture and of required shade and colour complete - - - - -

to achieve even shade and colour.

13.41.1 New work (two or more coats) over and including water tinnable priming coat with

cement primer having VOC content less then 50 gram/litre .

13.48A Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50

gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt

122 resistance exterior paint of required shade (Company Depot Tinted) with silicon - - - - -

13.48A.1 New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming

123 coat of exterior primer applied @ 0.90 litre/10 sqm. Sqm 860 181.25 188.701 - 1,62,283.02 - -

13.62 Painting with synthetic enamel paint of approved brand and manufacture of required

colour to give an even shade :

13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary

paint of approved brand and manufacture

13.80 Providing and applying white cement based putty of average thickness 1 mm, of

126 approved brand and manufacturer, over the plastered wall surface to prepare the sqm 4146.68 156.05 162.465 - 6,73,691.65 - -

surface even and smooth complete.

13.83 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

127 Organic Compound ) content less than 50 grams/ litre of approved brand and - - - - -

manufacture, including applying additional coats wherever required to achieve even

shade and colour.

129 21.0 ALUMINIUM WORK - - - - -

Digitally signed by

ISTPage 27 of 103

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections

of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at junctions, i.e. at top,

bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections

shall be smooth, rust free, straight, mitred and jointed mechanically wherever required

130 including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / - - - - -

stainless steel screws, all complete as per architectural drawings and the directions of

Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

131 21.1.1 For fixed portion - - - - -

21.1.1.1 Anodised aluminium (anodised transparent or

132 dyed to required shade according to IS: 1868, Kg 10.00 495.05 515.402 - 5,154.02 - -

Minimum anodic coating of grade AC 15)

21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/

133 pivots and making provision for fixing of fittings wherever required including the cost of - - - - -

EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

21.1.2.1 Anodised aluminium (anodised transparent or

134 dyed to required shade according to IS: 1868, Kg 9.00 598.60 623.208 - 5,608.88 - -

Minimum anodic coating of grade AC 15)

21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and

135 partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the - - - - -

architectural drawings and the directions of engineer-in-charge. (Cost of aluminium

snap beading shall be paid in basic item):

136 21.3.2 With float glass panes of 5.0 mm thickness(wt not less then 12.5 kg/sqm) sqm 40.00 1505.25 1,567.131 - 62,685.23 - -

21.8 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by

providing weather silicon sealant over backer rod of approved quality as per

137 architectural drawings and direction of Engineer-in-charge complete. - - - - -

138 21.8.1 Upto 5mm depth and 5 mm width Metre 2 96.75 100.727 - 201.45 - -

139 WATER PROOFING - - - - -

Providing and laying water proofing treatment in sunken portion of WCs, bathrooms etc.

by applying cement slurry mixed with water proofing cement comopund consisting of

applying: a) First layer of slurry of cement @ 0.488 kg./Sqm mixed with water proofing

cement comound @ 0.253 kg./Sqm. This layer will be allowed to air cure for 4 hours. b)

Second layer of slurry of cement @ 0.242 kg./Sqm mixed with water proofing cement

comopund @ 0.126 kg./Sqm. This layer will be allowed to air cure for 4 hours followed

with water curing for 48 hours. The rate includes preparation of surface, treatment and

sealing of all joints, corners, junctions of pipes and masonary with polymer mixed

Providing and laying in situ five course water proofing treatment with APP (Atactic

Polypropylene) modified Polymeric memberane over roof consisting of first coat of

bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20

kg/sqm, which shall onsist of blown type bitumen of grade 85/25 conforming to IS :

702, 3rd layer of roofing membrane APP modified Polymeric membrane .0 mm thick of

141 14.87 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 Sqm 20 532.05 553.923 - 11,078.45 - -

micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric

mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall

be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1

cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of

cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished

neat (item of laying brick tiles shall be paid for separately).

12.55 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with

SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance> 0.75 on

waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in

142 the ratio of 1 :4 (1 cement : 4 coarse sand) and grouting the joints with mix of white Sqm 20 1703.95 1,773.999 - 35,479.99 - -

cement & marble powder in ratio of 1 :1, including rubbing and polishing of the surface

upto 3 cuts complete, including providing skirting upto 150 mm height along the

parapet walls in the same manner

143 26.0 NEW TECHNOLOGIES AND MATERIALS - - - - -

Digitally signed by

ISTPage 28 of 103

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

26.22 Providing and fixing false ceiling at all heights with integral densified

calcium silicate reinforced with fibre and natural filler false ceiling

tiles of Size 595x595mm of approved texture, design and patterns

as per CPWD Specification 2019, to be laid in true horizontal level

suspended on inter-locking metal T-Grid of hot dipped galvanised

iron section of 0.33mmthick (galvanized @ 120 grams per sqm

including both sides)comprising of main-T runners of size 24x38

mm of length 3000 mm,cross - T of size 24x32 mm of length

1200 mm and secondary intermediate cross-T of size 24x32 mm

of length 600mm to formgrid module of size 600 x 600 mm,

144 suspended from ceiling usinggalvanised mild steel items (galvanizing - - - - -

@ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia

fully threaded hanger rod upto 1000 mm length and L-shape level

adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size

25x37x25x1.6mm thick with precut hole on both 25mm flange to

pierce into 12x50mm or even bigger size dash fastener if require,

fixed with Glavanised iron perimeter wall angle or size 24x24x0.40

mm of length 3000 mm to be fixed on periphey wall / partition with

the help of plastic rawl plugs at 450mm center to center and 40 mm

long dry wall S.S screws. The workshall be carried out as per

specifications,

26.22.1 Providing and fixing false ceiling at all heights with integral densified

calcium silicate reinforced with fibre and natural filler false ceiling

tiles of Size 595x595mm of approved texture, design and patterns

as per CPWD Specification 2019, to be laid in true horizontal level

suspended on inter-locking metal T-Grid of hot dipped galvanised

iron section of 0.33mmthick (galvanized @ 120 grams per sqm

including both sides)comprising of main-T runners of size 24x38

mm of length 3000 mm,cross - T of size 24x32 mm of length

1200 mm and secondary intermediate cross-T of size 24x32 mm

of length 600mm to formgrid module of size 600 x 600 mm,

145 suspended from ceiling usinggalvanised mild steel items (galvanizing sqm 57.60 2207 2,297.730 - 1,32,349.23 - -

@ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia

fully threaded hanger rod upto 1000 mm length and L-shape level

adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size

25x37x25x1.6mm thick with precut hole on both 25mm flange to

pierce into 12x50mm or even bigger size dash fastener if require,

fixed with Glavanised iron perimeter wall angle or size 24x24x0.40

mm of length 3000 mm to be fixed on periphey wall / partition with

the help of plastic rawl plugs at 450mm center to center and 40 mm

long dry wall S.S screws. The workshall be carried out as per

specifications,- With 15 mm thick Tegular edged light weight calcium sliciate false ceiling

146 17.0 SANITARY INSTALLATIONS - - - - -

Note:-1. All Sanitarty fixture shal be low flow as mentioned below , where flow/ flush

rate of fixture shall be equivalent or lesser at 3 bar pressure( lpm/lpf) .

2. water closet flushing cistern (dual flush 3/6) urinals 2 lpm faucets (lavatory

,pantry,health) 6 lpm.

149 3.multiple sprinkler system native trees & vegetation shall be used. - - - - -

4.over flow rain water storage & reuse on site of at least 75% of total building water

demand of 2 days shall be provide .

5. Desalting & grease trap system along with the proper flitation for rain water

recharging shall be provided.

17.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm

sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush

pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all

fittings and fixtures complete, including cutting and making good the walls and floors

152 wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm Each 12 6,767.40 7,045.608 - 84,547 - -

with integral type foot rests

NS-2 Providing white vitreous china wall hung type European W.C. pan with white plastic seat

and lid with C.P. brass hinges & rubber buffers, 3/6 liters dual flush type white vitreous

153 china low level flushing cistern fixed directly on W.C. pan with fittings and brackets Each 12 - - 17,916.68 - - 2,15,000.16

17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm

C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting

154 and making good the walls wherever require : - - - - -

17.7.2 White Vitreous China Wash basin size 630x450 mm with a

single 15 mm C.P. brass pillar tap

17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with

156 C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, - - - - -

cutting and making good the walls wherever required :

157 17.10.1 Kitchen sink with drain board - - - - -

Digitally signed by

ISTPage 29 of 103

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as

per the direction of Engineer-in-charge.

17.28 Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fittings

Providing and fixing 15mm C.P brass Sink Mixer for kitchen sink with swinging spout

complete. Including cutting and making good the walls wherever required .

164 Providing and Fixing of C.P. Brass Shower set comprising of : - - - - -

165 One No. CP brass Single Lever Concealed Diverter . - - - - -

166 One No. CP brass OH shower head & Shower Arm . - - - - -

167 One No. CP brass Bath Spout. - - - - -

168 Including cutting and making good the walls wherever required. - - - - -

169 NS-4 Shower set as described above. Set 4 - - 6,284.61 - - 25,138.45

17.31 Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved

170 quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP Each 24 1607.95 1,674.053 - 40,177.27 - -

brass screws and washers complete.

171 17.34 Providing and fixing toilet paper holder : - - - - -

17.73 Providing and fixing PTMT towel rail complete with brackets fixed to

173 wooden cleats with CP brass screws with concealed fittings arrangement of approved - - - - -

quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height

of 88 mm, weighing not less than 190 gms

Providing and fixing health faucet with 1 m long flexible tube and wall hook including all

fittings approved quality.

176 18.49 Providing & fixing CP brass bib cock of approved quality conforming IS 8931: - - - - -

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

standards and weighing not less than 690 gms.

Providing and fixing CP brass angle valve for basin mixer and geyser points of approved

quality confirming IS: 8931:

182 WATER SUPPLY - - - - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,

183 18.7 including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & - - - - -

fittings with one step CPVC solvent cement and testing of joints complete as per

direction of Engineer in Charge.

184 Internal work - Exposed on wall - - - - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,

i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &

fittings with one step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction of Engineer in

190 Concealed work, including cutting chases and making good the walls etc. - - - - -

194 18.8.4 32 mm nominal outer dia Pipes Metre 90 739.30 769.693 - 69,272.34 - -

Providing and placing on terrace (at all floor levels) polythene water storage tank of

195 18.48 approved brand and manufacture with cover and suitable locking arrangement and Litre 12000 11.00 11.452 - 1,37,426.52 - -

making necessary holes for inlet , outlet and overflow pipes but without fittings and the

base support for tank.

196 INTERNAL DRAINAGE - - - - -

12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm

diameter and weighing not less than 440 grams.

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of

min 6 Kg/ Sq cm rating with fitting for waste pipe from fixtures to floor trap including

reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level

198 NS-7 supported by clamp & hangers etc. The work includes cutting holes in wall/ floors/ slabs - - - - -

and making good the same with cement concrete 1:2:4 complete as required.

Digitally signed by

ISTPage 30 of 103

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all

206 NS-8-1 S-Trap type Floor Trap 110 x 110 mm (Long type-50 mm seal) Each 24.00 - - 777.41 - - 18,657.82

207 NS-8-2 P-Trap type Floor Trap 110 x 110 mm (Long type - 50 mm seal) Each 24.00 - - 451.83 - - 10,843.86

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of

208 19.1 cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of - - - - -

joints etc. complete :

210 EXTERNAL SEWEGE SYSTEM - - - - -

211 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not excee - - - - -

2.10 Excavating trenches of required width for pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting

out the excavated soil, and then returning the soil as required, in layers not exceeding

20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.

213 and disposing of surplus excavated soil as directed, within a lead of 50 m : - - - - -

214 2.10.1 All kinds of soil. - - - - -

215 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 120 352.15 366.627 - 43,995.23 - -

19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating

brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design:

218 19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 16 2802.15 2,917.346 - 46,677.54 - -

19.7 Constructing brick masonry manhole in cement mortar 1 : 4 (1 cement : 4 coarse

sand) with RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone

aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse

sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick

219 with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat - - - -

cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4

graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat

cement complete as per standard design

19.7.1 Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x

220 610mm internal dimensions, total weight of cover & frame to be not less than 38 kg - - - -

(weight of cover 23 kg and weight of frame 15 kg)

221 19.7.1.1 With common burnt clay F.P.S.(non modular) bricks of classic designation 7.5 each 10.00 12,770.55 13,295.547 - 1,32,955.47 -

222 19.8 Extra for depth for manholes : - - - - -

224 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 10 8825.40 9,188.212 - 91,882.12 - -

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in surface / recessed medium class

226 1.10 PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point - - - - -

with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor

228 1.11 single core cable in surface / recessed medium class PVC conduit, 2 way modular Point 60.00 - 1562 1,681.97 - 1,00,917.90 -

switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC

insulated copper conductor single core cable etc as required.

Wiring for light/power plug with 2x4 Sq.mm FRLS PVC insulated, copper conductor,

229 1.12 single core cable in surface/recessed PVC conduit alongwith 1 No. 4 Sq.mm FRLS PVC Metre 80.00 - 334 359.65 - 28,772.16 -

insulated copper conductor single core cable for loop earthing as required.

Wiring for light/power plug with 4x4 Sq.mm FRLS PVC insulated, copper conductor,

230 1.13 single core cable in surface/recessed PVC conduit alongwith 2 Nos. 4 Sq.mm FRLS PVC Metre 60.00 - 537 578.24 - 34,694.57 -

insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS

231 1.14 PVC insulated copper conductor, single core cable in surface/ recessed medium class - - - - -

PVC conduit as required

Digitally signed by

ISTPage 31 of 103

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

Supplying and fixing of following sizes of medium class PVC conduit along with

237 1.21 accessories in surface/recess including cutting the wall and making good the same in - - - - -

case of recessed conduit as required.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate

switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover

plate for modular switches in recess etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on

246 1.32 surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular Each 144.00 - 586 631.01 - 90,864.88 -

socket outlet and 15/16 amps modular switch, connection etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact

fluorescent fitting of all types, complete with all accessories and tube etc. directly on

ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper

247 1.41 conductor, single core cable and earthing etc. as required. Each 144.00 - 206 221.82 - 31,942.26 -

Installation, testing and commissioning of ceiling fan, including wiring the down rods of

standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,

single core cable, including providing and fixing phenolic laminated sheet cover on the

Installation of exhaust fan in the existing opening, including making good the damage,

249 1.50 connection, testing, commissioning etc. as required. - - - - -

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete

with G.I. fittings including trenching (75 cm deep)and re-filling etc. as required

Supplying and fixing following way, single pole and neutral, sheet steel ,MCB distribution

254 2.3 board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral bus - - - - -

bar, earth bar, din bar, interconnections powder painted including earthing etc. as

required. (But with out MCB/RCCB/ Isolator).

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel

256 2.4 ,MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper - - - - -

busbar, neutral bus bar, earth bar, din bar, interconnections powder painted including

earthing etc. as required. (But with out MCB/RCCB/ Isolator).

supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C Curve, miniature circuit

258 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete - - - - -

with connectoin testing and commissioning etc.as required.

supplying and fixing following rating,double pole,240 V,isolator in the existing MCB DB

complete with connectoin testing and commissioning etc.as required.

supplying and fixing following rating,four pole,415 V,isolator in the existing MCB DB

complete with connectoin testing and commissioning etc.as required.

supplying and fixing following rating,double pole,240 V,residual current circuit breaker

264 2.14 (RCCB),having a sensitivity currrent 30 mA in the eiting MCB DB completed with - - - - -

connection ,teting commisoining etc.as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip

earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer

etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt

& spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along

with existing surface/ recessed conduit/ submain wiring/ cable as required.

269 FITTING & FIXTURES - - - - -

Supply, Installation, Testing & Commissioning of recessed type down lighter complete

270 NS-11 with lamps & accessories 18 W Philips Model No:DN296B LED 20S-6500 PSE WH S2/ Each 72.00 - - 1,470.79 - - 1,05,897.09

Havells Model: INTEGRANEODLR18WLED865S or equivalent

Supply, Installation, Testing & Commissioning of recess type 2x2, 36watt LED Light

271 NS-12 Fixtures complete with lamps & accessories.Philips Model No:RC380B LED 36S/ Havells Each 48.00 - - 7,295.13 - - 3,50,166.38

Model: VENUSNEO2X2PLR36WLED865G2 or equivalent

Digitally signed by

ISTPage 32 of 103

DSR-2022 E/M Amount (DSR

Rate- Amount (DSR-2023)

DSR-2023 Rate (incl. DSR 2022 Rate (incl. CF 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS Civil NS AMOUNT

CF 0.973 + CI 7%) E/M Rate 0.973+CI 6.33%) E/M with

with correction factor

4.08% ) correction factor

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated,

ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos.

blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding,

Power Factornot less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery

minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%,

remote or electronic regulator unit for speed control and all remaining accessories

272 19.1 including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), Each 60.00 - 2730 2,939.67 - 1,76,380.2 -

insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required.

Supplying of approved make Exaust Fan of the following size and its all accessories

273 NS-13 suitable for operation on 230V single phase, 50 Hz, AC supply complete as required.- Each 60.00 - - 2,432.8 - - 1,45,965.71

Providing and fixing GRC Jali 40 mm thick as per required opening size & all heights

274 NS-53 with all complete as per direction Engineer In Charge. Sqm 100.00 - - 4,747.4 4,74,738.04

Supplying Installation, testing and commissioning of 25 lt.Geyser with all complete as

275 NS-55 per direction Engineer In Charge. Each 24.00 - - 8,637.3 2,07,295.97

Providing and fixing glazing in aluminium door, window, ventilator shutters and

partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the

architectural drawings and the directions of engineer-in-charge. (No extra Cost )-

Laminated Clear Toughned glass -6 mm

Providing and fixing Granite quadrant of 250 mm dia bathroom corner self with all

respect complete 24 415.3

Supply, Installation, Testing & Commissioning of flood light 80watt with all respect

complete. 10 7,572.4

Providing and fixing Aluminium Ventilator Louvers with 5 mm thick glass with all respect

complete. 36 4,952.5

Digitally signed by

ISTPage 33 of 103

BOQ- Warden Residence-1

Name of Work:- Construction Parallel extension of the existing school building and additional staff quarters work at JNV Nandurbar-I (MH).

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

1 2.0 EARTH WORK

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means

2 2.6 over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan)

including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth

to be levelled and neatly dressed.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

4 2.25 foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited cum 96.41 196.00 204.06 - - 19,673.24 - -

layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Supplying and filling in plinth with sand under floors including watering, ramming

consolidating and dressing complete.

6 2.34 Supplying chemical emulsion in sealed containers including delivery as specified. - - - - - -

7 2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 2.50 234.75 244.40 - - 611.00 - -

Diluting and injecting chemical emulsion for Post - CONSTRUCTIONAL anti-termite

treatment (excluding the cost of chemical emulsion)

Along external wall where the apron is not provided using chemical emulsion @ 7.5

9 2.35.1 litres / sqm of the vertical surface of the substructure to a depth of 300mm including - - - - -

excavation channel along the wall & rodding etc. complete:

10 2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Metre 15.00 38.9 40.50 - 607.49 - -

Treatment of soil under existing floors using chemical emulsion @ one litre per hole,

11 2.35.3 300 mm apart including drilling 12 mm dia holes and plugging with cement mortar 1:2 - - - - - -

(1 cement :2 coarse sand ) to match the existing floor.

12 2.35.3.1 With Chlorpyriphos /Lindane E C. 20% with 1% concentration. Sqm 50.00 310.05 322.80 - - 16,139.81 - -

13 4.0 CONCRETE WORK - - - - - -

Providing and laying in position cement concrete of specified grade excluding the cost of

cantering and shuttering - All work up to plinth level

15 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cum 30.58 6812.00 7,092.04 - - 2,16,859.11 - -

1:5:10 (1 cement : 5 coarse sand(zone -III) derived from natural soueces : 10 graded

stone aggregate 40 mm nominal size Derived from natural soueces

Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1

17 4.10 cement : 2 coarse sand(zone -III) derived from natural soueces : 4 graded stone Sqm 18.40 410.85 427.74 - - 7,870.42 - -

aggregate 12.5 mm nominal size derived from natural soueces.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3

manufactured sand (zone-III) derived from natural sources : 6 graded stone aggregate

18 4.17 20 mm nominal size derived from natural sources over 75mm thick bed of dry brick Sqm 37.50 749.30 780.10 - - 29,253.89 - -

ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand,

including necessary excavatin, levelling & dressing & finishing the top smooth.

20 5.9 Centring and shuttering including strutting, propping etc. and removal of form for: - - - - - -

21 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 44.78 392.15 408.27 - - 18,280.35 - -

22 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 110.50 927.25 965.37 - - 1,06,673.30 - -

23 5.9.5 Lintels, beams, plinth beams, girders, bressummers and cantilevers. Sqm 82.40 736.40 766.67 - - 63,173.89 - -

24 5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 127.46 961.30 1,000.82 - - 1,27,566.90 - -

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

26 5.22.6 Thermo-Mechanically Treated bars of grade Fe- 500D or more. kg 1356.95 107.85 112.28 - - 1,52,363 - -

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

28 5.22A.6 Thermo-Mechanically Treated bars of grade Fe- 500D or more. kg 838.80 107.85 112.28 - - 94,184 - -

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement

concrete work, using cement content as per approved design mix, manufactured in fully

automatic batching plant and transported to site of work in transit mixer for all leads,

having continuous agitated mixer, manufactured as per mix design of specified grade

for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to

29 5.33 site of laying , excluding the cost of cantering, shuttering finishing and reinforcement, - - - - - -

including cost of admixtures in recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement

used as per design mix is payable/recoverable separately).

30 All works upto plinth level - - - - - -

31 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 13.57 9504.75 9,895.49 - - 1,34,277 - -

Digitally signed by

ISTPage 34 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

32 All works above plinth level upto floor V level - - - - - -

33 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 8.39 9860.40 10,265.76 - - 86,109 - -

Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5

in foundation and plinth

36 6.1.2 Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 23.74 7,132.25 7,425.46 - 1,76,289

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in

superstructure above plinth level up to floor five level in :

Half brick masonry with non modular fly ash bricks of class designation 10, conforming

to IS: 12894, in superstructure above plinth up to floor V level.

42 8.0 CLADDING WORK - - - - - -

Providing and fixing 18mm thick gang saw cut mirror polished remoulded and

repolished) machine cut for kitchen platforms, vanity counters, window sills , facias and

similar locations of required size of approved shade, colour and texture laid over 20mm

43 8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white - - - - - -

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

44 8.2.3 Granite stone slab of all colourand texture expect black,Cherry/ Ruby Red - - - - - -

Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including

46 8.3 machine polishing to edge to give high gloss finish etc. complete as per design - - - - - -

approved by Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

48 8.4 and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning metre 4.00 568.55 591.92 - - 2,367.69 - -

Extra for providing opening of required size & shape for wash basins / kitchen sink in

49 8.5 kitchen platform, vanity counters and similar location in marble / Granite / stone work Each 2.00 978.70 1,018.93 - - 2,037.87 - -

including necessary holes for pillar taps etc. Including rubbing and polishing necessary

Providing wood work in frames of doors, windows, clerestory windows and other

51 9.1 frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners - - -

of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing 19 mm thick both side balancing laminationfactory pressed BWP

grade marine ply as per IS : 710 of approved brand

boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws

53 9.169 etc. complete as per direction of Engineer-incharge Sqm 8.46 2593.15 2,699.75 - - 22,839.92 - -

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)

54 9.21 non-decorative type, core of block board construction with frame of 1st class hard wood - - - - - -

and well matched commercial 3 ply veneering with vertical grains or cross bands and

face veneers on both faces of shutters :

55 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 12.60 2392.65 2,491.01 - - 31,386.75 - -

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on

all edges of flush door shutters (over all area of door shutter to be measured).

Extra for cutting rebate in flush door shutters (Total area of the shutter to be

Providing & fixing bright finished brass 100mm mortice latch and lock with 6 levers and

58 9.76 a pair of lever handles with necessary screws etc. complete (Best make of approved Each 2.00 854.65 889.78 - - 1,779.57 - -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating

59 9.96 not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or - - - - - -

shade with nuts and screws etc. complete:

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less

61 9.97 than grade AC 10 as per IS : 1868 ) transparent or dyed toreqired colour or shade with - - - - - -

necessary screws etc.

Digitally signed by

ISTPage 35 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less

63 9.100 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade - - - - - -

with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic

65 9.101 coating not less than grade AC 10 as per IS :1868) transparent or dyed to required - - - - - -

colour or shade with necessary screws etc. complete:

Providing & fixing special quality bright finished brass Cupboard or ward robe locks with

67 9.79 four levers including necessary screws etc. complete (best make of approved quality). - - - - - -

Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe

shutters, including fixing with necessary screws etc. complete.

71 9.114.2 Double strip (horizontal type) Each 2 39.7 41.33 - - 82.66 - -

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in

72 9.127 gloss / matt / suede finish with high density protective surface layer and reverse side of - - -

adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

Providing and fixing factory made uPVC glazed/wire mesh windows/comprising of lead

free uPVC multi-chambered frame, sash and mullion/coupler (where ever required)

extruded profiles having minimum wall thickness of 1.7 mm for series R1 and R2

profiles and 2.1 mm for series R3 and R4 profiles confirming to EN:12608 in any shape,

colure and design duly reinforced with galvanized mild steel section made of required

shape & size as per CPWD Speifications ,upvc extructed glazing beads ,interlocks and

inline sash adaptor (where ever required ) of appropriate dimension ,EPDM gasket,

stainless steel SS 304 grade fastners of minimum 8 mm dia with countersunk head

,comprising of matching polymade PA6 grade sleeve for fixing frame to finishing wall as

74 9.147A per IS 1367 : Part 1 to 14 coated) casement handles, G.I fasteners 100 x 8 mm size - - -

for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless

steel screws etc. Profile of frame & sash mullion ( if required ) shall be mitred cut and

fusion welded /mechanically jointed duly sealed at all corners, including drilling of holes

for fixing hardware's and drainage of water etc. After fixing frame the gap between

frame and adjacent finished wall shall be filled with weather proof silicon sealant over

backer rod of required size and of approved quality, all complete as per approved

drawing comprising to CPWD Specification & direction of Engineer-in-Charge. section of

steel reinforcement and cross section of UPVC Profile to be as per design approved by

Engineer-in-Charge.

Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without

75 high performance coatings as per design requirements and conforming to IS: 3548 & - - -

IS: 16231 shall be paid separately

Note:- Structural design proof checked from a Government Engineering Institute, to be

provided by the manufacturer for

77 (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 - - -

78 (ii) Sites with structure height more than 20m for all wind speeds - - -

Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm &

79 9.147.A1.3 above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every Sqm 9.00 9628.6 10,024.43 - 90,219.89

panel along with multi-point locking system (Height above 1.8m)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S.

flats, square or round bars etc. including priming coat withapproved steel primer all

81 9.48.1 Fixed to steel window by welding kg 72.00 219.1 228.11 - - 16,423.72 - -

Digitally signed by

ISTPage 36 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers

(wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index

of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and

screwed with full body threaded star headed SS screws having minimum frame density

82 26.86 of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum - - - - -

compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to

spread of flame of Class A category with property of being termite/borer proof,

water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS

dash fasteners of required dia and length complete as per direction of Engineer-In-

Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5 mm tolerance in profile dimensions

on plus side shall be acceptable but no extra payment on this account shall be made

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

board one side white color and other side of board laminited with pvc foil of minium 14

micron thickness of approved design pasted with hot melt adhesive for cup boards,work

station and bathroom /kitchen cabinet etc.of required sizes comprising of virgin polymer

of K (value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12

for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of

85 26.89 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of - - - - -

elasticity 850 N/mm2 and resistance to spread of flame of Class A category with

property of being termite/borer proof, water/moisture proof and fire retardant and

fixing with stainless steel piano hinges /soft close clip on concealed hinges of required

size with necessary full body threaded star headed counter sunk S.S screws, all as per

direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft clip on

concealed hinges and necessary S.S screws shall be paid separately).

87 NS-18 Providing and fixing Magic eye with all respect complete. Each 1.00 - - 164.45 - - 164.45

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan

clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with

89 10.18 its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ Each 2 220.65 229.72 - - 459.44 - -

M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners.

Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories & stainless steel dash

90 10.28 fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side Kg 3.00 772.40 804.15 - - 2,412.46 - -

of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for

payment purpose only weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with

M.S. Flat 15x3 mm and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both

93 11.0 FLOORING WORK - - - - - -

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse

94 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the - - - - - -

joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

95 11.41A.1 Double charge vitrified tile polished finish of size - - - - - -

Digitally signed by

ISTPage 37 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved

97 11.38 make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 sqm 1,369.37 - 11,639.66 -

mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and

matching pigments etc., complete. 8.50 1315.3

Providing and laying Ceramic glazed Wall tiles of size 600x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved

98 NS-56 make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 sqm 45.36 - - 1453.489485 65,930.28

mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and

matching pigments etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement

99 11.56 mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing - - - - - -

with white cement slurry admixed with pigment of matching shade including rubbing ,

curing and polishing etc. all complete as specified and as directed by the Engineer-in-

100 11.56.2 Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red sqm 91.20 3071.05 3,197.30 - - 2,91,593.84 - -

Providing and fixing 1 mm galvalume roof sheet AZ-150 ,660 MPA including ridge,

102 NS-1 flashing over lapping etc complete plan area should be measured nothing extra shall sqm 120.00 - - 598.01 - - 71,760.85

be paid for lap, profile. ( valley creast etc)

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm Painting top

of roofs with bitumen of approved quality @ 17kg per 10 sqm

103 12.15 impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the sqm - - - - -

slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil

104 12.15.1 With residual type petroleum bitumen of grade VG -10 sqm 120 166.2 173.03 - 20,763.90 - -

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses

etc., including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer, including welding and bolted with special shaped washers etc.

106 10.16.1 Hot finished welded type tubes kg 792.00 194.4 202.39 - 1,60,294.29 - -

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm

diameter and weighing not less than 440 grams.

108 13.0 FINISHING WORK - - - - -

109 13.4 12 mm cement plaster of mix : - - - - -

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1

111 13.11 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 Sqm 200 518.55 539.87 - 1,07,973.52 - -

cement : 6 fine sand).

112 13.16 6 mm cement plaster to ceiling of mix : - - - - -

Distempering with1st quality acrylic distemper (ready mixed) having VOC content less

114 13.41 then 50 gram/litre of approved manufacture and of required shade and colour complete - - - - -

to achieve even shade and colour.

New work (two or more coats) over and including water tinnable priming coat with

cement primer having VOC content less then 50 gram/litre .

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50

116 13.48A gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt - - - - -

resistance exterior paint of required shade (Company Depot Tinted) with silicon

New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming

coat of exterior primer applied @ 0.90 litre/10 sqm.

Painting with synthetic enamel paint of approved brand and manufacture of required

colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with ordinary

paint of approved brand and manufacture

Providing and applying white cement based putty of average thickness 1 mm, of

approved brand and manufacturer, over the plastered wall surface to prepare the

surface even and smooth complete.

Digitally signed by

ISTPage 38 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Wall painting with premium acrylic emulsion paint of interior grade, having

121 13.83 VOC (Volatile Organic Compound ) content less than 50 grams/ litre of - - - - -

approved brand and manufacture, including applying additional coats

wherever required to achieve even shade and colour.

123 21.0 ALUMINIUM WORK - - - - -

124 21.3.2 With float glass panes of 5.0 mm thickness(wt not less then 12.5 kg/sqm) sqm 4.00 1505.25 1,567.13 - 6,268.52 - -

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by

providing weather silicon sealant over backer rod of approved quality as per

125 21.8 architectural drawings and direction of Engineer-in-charge complete. - - - - -

127 WATER PROOFING - - - - -

Providing and laying water proofing treatment in sunken portion of WCs, bathrooms etc.

by applying cement slurry mixed with water proofing cement comopund consisting of

applying: a) First layer of slurry of cement @ 0.488 kg./Sqm mixed with water proofing

cement comound @ 0.253 kg./Sqm. This layer will be allowed to air cure for 4 hours. b)

128 22.5 Second layer of slurry of cement @ 0.242 kg./Sqm mixed with water proofing cement Sqm 12.00 617.05 642.42 - 7,709.00 - -

comopund @ 0.126 kg./Sqm. This layer will be allowed to air cure for 4 hours followed

with water curing for 48 hours. The rate includes preparation of surface, treatment and

sealing of all joints, corners, junctions of pipes and masonary with polymer mixed

Providing and laying in situ five course water proofing treatment with APP (Atactic

Polypropylene) modified Polymeric memberane over roof consisting of first coat of

bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20

kg/sqm, which shall onsist of blown type bitumen of grade 85/25 conforming to IS :

702, 3rd layer of roofing membrane APP modified Polymeric membrane .0 mm thick of

3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100

129 14.87 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric Sqm 20.00 532.05 553.92 - 11,078.45 - -

mix is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall

be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1

cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of

cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished

neat (item of laying brick tiles shall be paid for separately).

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with

SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance> 0.75 on

waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in

130 12.55 the ratio of 1 :4 (1 cement : 4 coarse sand) and grouting the joints with mix of white Sqm 10.00 1703.95 1,774.00 - 17,739.99 - -

cement & marble powder in ratio of 1 :1, including rubbing and polishing of the surface

upto 3 cuts complete, including providing skirting upto 150 mm height along the

parapet walls in the same manner

131 26.0 NEW TECHNOLOGIES AND MATERIALS - - - - -

Digitally signed by

ISTPage 39 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Providing and fixing false ceiling at all heights with integral densified

calcium silicate reinforced with fibre and natural filler false ceiling

tiles of Size 595x595mm of approved texture, design and patterns

as per CPWD Specification 2019, to be laid in true horizontal level

suspended on inter-locking metal T-Grid of hot dipped galvanised

iron section of 0.33mmthick (galvanized @ 120 grams per sqm

including both sides)comprising of main-T runners of size 24x38

mm of length 3000 mm,cross - T of size 24x32 mm of length

1200 mm and secondary intermediate cross-T of size 24x32 mm

of length 600mm to formgrid module of size 600 x 600 mm,

132 26.22 suspended from ceiling usinggalvanised mild steel items (galvanizing - - - - -

@ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia

fully threaded hanger rod upto 1000 mm length and L-shape level

adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size

25x37x25x1.6mm thick with precut hole on both 25mm flange to

pierce into 12x50mm or even bigger size dash fastener if require,

fixed with Glavanised iron perimeter wall angle or size 24x24x0.40

mm of length 3000 mm to be fixed on periphey wall / partition with

the help of plastic rawl plugs at 450mm center to center and 40 mm

long dry wall S.S screws. The workshall be carried out as per

specifications,

Providing and fixing false ceiling at all heights with integral densified

calcium silicate reinforced with fibre and natural filler false ceiling

tiles of Size 595x595mm of approved texture, design and patterns

as per CPWD Specification 2019, to be laid in true horizontal level

suspended on inter-locking metal T-Grid of hot dipped galvanised

iron section of 0.33mmthick (galvanized @ 120 grams per sqm

including both sides)comprising of main-T runners of size 24x38

mm of length 3000 mm,cross - T of size 24x32 mm of length

1200 mm and secondary intermediate cross-T of size 24x32 mm

of length 600mm to formgrid module of size 600 x 600 mm,

133 26.22.1 suspended from ceiling usinggalvanised mild steel items (galvanizing sqm 17.00 2207 2,297.73 - 39,061.41 - -

@ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia

fully threaded hanger rod upto 1000 mm length and L-shape level

adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size

25x37x25x1.6mm thick with precut hole on both 25mm flange to

pierce into 12x50mm or even bigger size dash fastener if require,

fixed with Glavanised iron perimeter wall angle or size 24x24x0.40

mm of length 3000 mm to be fixed on periphey wall / partition with

the help of plastic rawl plugs at 450mm center to center and 40 mm

long dry wall S.S screws. The workshall be carried out as per

specifications,- With 15 mm thick Tegular edged light weight calcium sliciate false ceiling

17.0 SANITARY INSTALLATIONS

Note:-1. All Sanitarty fixture shal be low flow as mentioned below , where flow/ flush

rate of fixture shall be equivalent or lesser at 3 bar pressure( lpm/lpf) .

2. water closet flushing cistern (dual flush 3/6) urinals 2 lpm faucets (lavatory

,pantry,health) 6 lpm.

137 3.multiple sprinkler system native trees & vegetation shall be used. - - - - -

4.over flow rain water storage & reuse on site of at least 75% of total building water

demand of 2 days shall be provide .

5. Desalting & grease trap system along with the proper flitation for rain water

recharging shall be provided.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm

sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush

pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all

fittings and fixtures complete, including cutting and making good the walls and floors

140 17.1.1 wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm Each 1 6,767.40 7,045.61 - 7,046 - -

with integral type foot rests

Providing white vitreous china wall hung type European W.C. pan with white plastic seat

141 NS-2 and lid with C.P. brass hinges & rubber buffers, 3/6 liters dual flush type white vitreous Each 1 - - 17,916.68 - - 17,916.68

china low level flushing cistern fixed directly on W.C. pan with fittings and brackets

Digitally signed by

ISTPage 40 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm

142 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting - - - - -

and making good the walls wherever require :

White Vitreous China Wash basin size 630x450 mm with a

single 15 mm C.P. brass pillar tap

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with

144 17.10 C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, - - - - -

cutting and making good the walls wherever required :

145 17.10.1 Kitchen sink with drain board - - - - -

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as

per the direction of Engineer-in-charge.

Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fittings

149 17.28.1 Semi rigid pipe - - - - -

Providing and fixing 15mm C.P brass Sink Mixer for kitchen sink with swinging spout

complete. Including cutting and making good the walls wherever required .

152 Providing and Fixing of C.P. Brass Shower set comprising of : - - - - -

153 One No. CP brass Single Lever Concealed Diverter . - - - - -

154 One No. CP brass OH shower head & Shower Arm . - - - - -

155 One No. CP brass Bath Spout. - - - - -

156 Including cutting and making good the walls wherever required. - - - - -

157 NS-4 Shower set as described above. Set 2 - - 6,284.61 - - 12,569.22

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved

158 17.31 quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP Each 2 1607.95 1,674.05 - 3,348.11 - -

brass screws and washers complete.

159 17.34 Providing and fixing toilet paper holder : - - - - -

Providing and fixing PTMT towel rail complete with brackets fixed to

161 17.73 wooden cleats with CP brass screws with concealed fittings arrangement of approved - - - - -

quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height

of 88 mm, weighing not less than 190 gms

Providing and fixing health faucet with 1 m long flexible tube and wall hook including all

fittings approved quality.

164 18.49 Providing & fixing CP brass bib cock of approved quality conforming IS 8931: - - - - -

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

standards and weighing not less than 690 gms.

Providing and fixing CP brass angle valve for basin mixer and geyser points of approved

quality confirming IS: 8931:

170 WATER SUPPLY - - - - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,

171 18.7 including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & - - - - -

fittings with one step CPVC solvent cement and testing of joints complete as per

direction of Engineer in Charge.

172 Internal work - Exposed on wall - - - - -

173 18.7.1 15 mm nominal outer dia Pipes Metre 6 286.80 298.59 - 1,791.54 - -

174 18.7.2 20 mm nominal outer dia Pipes Metre 6 335.00 348.77 - 2,092.63 - -

175 18.7.3 25 mm nominal outer dia Pipes Metre 6 401.55 418.06 - 2,508.35 - -

176 18.7.4 32 mm nominal outer dia Pipes Metre 6 518.75 540.08 - 3,240.45 - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,

177 18.8 i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & - - - - -

fittings with one step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction of Engineer in

178 Concealed work, including cutting chases and making good the walls etc. - - - - -

179 18.8.1 15 mm nominal outer dia Pipes Metre 6 497.80 518.26 - 3,109.59 - -

180 18.8.2 20 mm nominal outer dia Pipes Metre 6 537.60 559.70 - 3,358.20 - -

181 18.8.3 25 mm nominal outer dia Pipes Metre 6 627.25 653.04 - 3,918.22 - -

182 18.8.4 32 mm nominal outer dia Pipes Metre 6 739.30 769.69 - 4,618.16 - -

Digitally signed by

ISTPage 41 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Providing and placing on terrace (at all floor levels) polythene water storage tank of

183 18.48 approved brand and manufacture with cover and suitable locking arrangement and Litre 500 11.00 11.45 - 5,726.11 - -

making necessary holes for inlet , outlet and overflow pipes but without fittings and the

base support for tank.

184 INTERNAL DRAINAGE - - - - -

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm

diameter and weighing not less than 440 grams.

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of

min 6 Kg/ Sq cm rating with fitting for waste pipe from fixtures to floor trap including

186 NS-7 reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level - - - - -

supported by clamp & hangers etc. The work includes cutting holes in wall/ floors/ slabs

and making good the same with cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all

194 NS-8-1 S-Trap type Floor Trap 110 x 110 mm (Long type-50 mm seal) Each 2.00 - - 777.41 - - 1,554.82

195 NS-8-2 P-Trap type Floor Trap 110 x 110 mm (Long type - 50 mm seal) Each 1.00 - - 451.83 - - 451.83

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of

196 19.1 cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of - - - - -

joints etc. complete :

198 EXTERNAL SEWEGE SYSTEM - - - - -

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in

foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),

199 2.8 including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting - - - - -

out the excavated soil and disposal of surplus excavated soil as directed, within a lead

Excavating trenches of required width for pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting

201 2.10 out the excavated soil, and then returning the soil as required, in layers not exceeding - - - - -

20 cm in depth, including consolidating each deposited layer by ramming, watering, etc.

and disposing of surplus excavated soil as directed, within a lead of 50 m :

202 2.10.1 All kinds of soil. - - - - -

203 2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Metre 4 352.15 366.63 - 1,466.51 - -

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating

204 19.4 brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size - - - - -

(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than

2.70 kg as per standard design:

206 19.4.3.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1 2802.15 2,917.35 - 2,917.35 - -

Constructing brick masonry manhole in cement mortar 1 : 4 (1 cement : 4 coarse

sand) with RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone

aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse

sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick

207 19.7 with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat - - -

cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4

graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat

cement complete as per standard design

Inside size 90 x 80 cm & 45 cm deep including CI cover with frame (light duty) 455 x

208 19.7.1 610mm internal dimensions, total weight of cover & frame to be not less than 38 kg - - -

(weight of cover 23 kg and weight of frame 15 kg)

209 19.7.1.1 With common burnt clay F.P.S.(non modular) bricks of classic designation 7.5 each 1.00 12,770.55 13,295.55 - 13,295.55

210 19.8 Extra for depth for manholes : - - - - -

212 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Metre 1 8825.40 9,188.21 - 9,188.21 - -

Digitally signed by

ISTPage 42 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in surface / recessed medium class

214 1.10 PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point - - - - -

with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor

216 1.11 single core cable in surface / recessed medium class PVC conduit, 2 way modular Point 2.00 - 1562 1,681.97 - 3,363.93 -

switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC

insulated copper conductor single core cable etc as required.

Wiring for light/power plug with 2x4 Sq.mm FRLS PVC insulated, copper conductor,

217 1.12 single core cable in surface/recessed PVC conduit alongwith 1 No. 4 Sq.mm FRLS PVC Metre 12.00 - 334 359.65 - 4,315.82 -

insulated copper conductor single core cable for loop earthing as required.

Wiring for light/power plug with 4x4 Sq.mm FRLS PVC insulated, copper conductor,

218 1.13 single core cable in surface/recessed PVC conduit alongwith 2 Nos. 4 Sq.mm FRLS PVC Metre 12.00 - 537 578.24 - 6,938.91 -

insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS

219 1.14 PVC insulated copper conductor, single core cable in surface/ recessed medium class - - - - -

PVC conduit as required

Supplying and fixing of following sizes of medium class PVC conduit along with

225 1.21 accessories in surface/recess including cutting the wall and making good the same in - - - - -

case of recessed conduit as required.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate

switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box

excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover

plate for modular switches in recess etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on

234 1.32 surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular Each 4.00 - 586 631.01 - 2,524.02 -

socket outlet and 15/16 amps modular switch, connection etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact

fluorescent fitting of all types, complete with all accessories and tube etc. directly on

ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper

conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of

standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,

single core cable, including providing and fixing phenolic laminated sheet cover on the

fan box etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage,

connection, testing, commissioning etc. as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete

with G.I. fittings including trenching (75 cm deep)and re-filling etc. as required

Supplying and fixing following way, single pole and neutral, sheet steel ,MCB distribution

242 2.3 board, 240 volts, on surface/ recess, complete with tinned copper busbar, neutral bus - - - - -

bar, earth bar, din bar, interconnections powder painted including earthing etc. as

required. (But with out MCB/RCCB/ Isolator).

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel

244 2.4 ,MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper - - - - -

busbar, neutral bus bar, earth bar, din bar, interconnections powder painted including

earthing etc. as required. (But with out MCB/RCCB/ Isolator).

Digitally signed by

ISTPage 43 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C Curve, miniature circuit

246 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete - - - - -

with connectoin testing and commissioning etc.as required.

supplying and fixing following rating,double pole,240 V,isolator in the existing MCB DB

complete with connectoin testing and commissioning etc.as required.

supplying and fixing following rating,four pole,415 V,isolator in the existing MCB DB

complete with connectoin testing and commissioning etc.as required.

supplying and fixing following rating,double pole,240 V,residual current circuit breaker

252 2.14 (RCCB),having a sensitivity currrent 30 mA in the eiting MCB DB completed with - - - - -

connection ,teting commisoining etc.as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip

255 5.9 earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer Metre 4.00 - 144 155.06 - 620.24 -

etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt

& spring washer spaced at 50mm)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along

with existing surface/ recessed conduit/ submain wiring/ cable as required.

257 FITTING & FIXTURES - - - - -

Supply, Installation, Testing & Commissioning of recessed type down lighter complete

with lamps & accessories 18 W Philips Model No:DN296B LED 20S-6500 PSE WH S2/

258 NS-11 Havells Model: INTEGRANEODLR18WLED865S or equivalent Each 2.00 - - 1,470.79 - - 2,941.59

Supply, Installation, Testing & Commissioning of recess type 2x2, 36watt LED Light

Fixtures complete with lamps & accessories.Philips Model No:RC380B LED 36S/ Havells

259 NS-12 Model: VENUSNEO2X2PLR36WLED865G2 or equivalent Each 2.00 - - 7,295.13 - - 14,590.27

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated,

ceiling fan with Brush Less Direct Current (BLDC)Motor, class of insulation: B, 3 nos.

blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding,

Power Factornot less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery

minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%,

remote or electronic regulator unit for speed control and all remaining accessories

260 19.1 including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), Each 2.00 - 2730 2,939.67 - 5,879.34 -

insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC

Supply, earthing etc. complete as required.

Supplying of approved make Exaust Fan of the following size and its all accessories

261 NS-13 suitable for operation on 230V single phase, 50 Hz, AC supply complete as required.- Each 1.00 - - 2,432.8 - - 2,432.76

Providing and fixing GRC Jali 40 mm thick as per required opening size & all heights

with all complete as per direction Engineer In Charge.

Supplying Installation, testing and commissioning of 25 lt.Geyser with all complete as

per direction Engineer In Charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and

264 NS-14 partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the Sqm 2 - - 1,637.6 3,275.20

architectural drawings and the directions of engineer-in-charge. (No extra Cost )-

Laminated Clear Toughned glass -6 mm

Providing and fixing Granite quadrant of 250 mm dia bathroom corner self with all

respect complete

Supply, Installation, Testing & Commissioning of flood light 80watt with all respect

Providing and fixing Aluminium Ventilator Louvers with 5 mm thick glass with all respect

Digitally signed by

ISTPage 44 of 103

BOQ- Warden Residence-2

Name of Work:- Construction Parallel extension of the existing school building and additional staff quarters work at JNV Nandurbar-I (MH).

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

1 2.0 EARTH WORK

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means

2 2.6 over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan)

including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth

to be levelled and neatly dressed.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

4 2.25 foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited cum 96.41 196.00 204.06 - - 19,673.24 - -

layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

5 2.27 Supplying and filling in plinth with sand under floors including watering, ramming Cum 10.13 2123.75 2,211.06 - - 22,386.96 - -

consolidating and dressing complete.

6 2.34 Supplying chemical emulsion in sealed containers including delivery as specified. - - - - - -

7 2.34.1 Chlorpyriphos/Lindane Emulsifiable concentrate of 20%. Ltr. 2.50 234.75 244.40 - - 611.00 - -

8 2.35 Diluting and injecting chemical emulsion for Post - CONSTRUCTIONAL anti-termite - - - - - -

treatment (excluding the cost of chemical emulsion)

Along external wall where the apron is not provided using chemical emulsion @ 7.5

9 2.35.1 litres / sqm of the vertical surface of the substructure to a depth of 300mm including - - - - -

excavation channel along the wall & rodding etc. complete:

10 2.35.1.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Metre 15.00 38.9 40.50 - 607.49 - -

Treatment of soil under existing floors using chemical emulsion @ one litre per hole,

11 2.35.3 300 mm apart including drilling 12 mm dia holes and plugging with cement mortar 1:2 - - - - - -

(1 cement :2 coarse sand ) to match the existing floor.

12 2.35.3.1 With Chlorpyriphos /Lindane E C. 20% with 1% concentration. Sqm 50.00 310.05 322.80 - - 16,139.81 - -

13 4.0 CONCRETE WORK - - - - - -

14 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of - - - - - -

cantering and shuttering - All work up to plinth level

15 4.1.8 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) cum 30.58 6812.00 7,092.04 - - 2,16,859.11 - -

1:5:10 (1 cement : 5 coarse sand(zone -III) derived from natural soueces : 10 graded

stone aggregate 40 mm nominal size Derived from natural soueces

Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1

17 4.10 cement : 2 coarse sand(zone -III) derived from natural soueces : 4 graded stone Sqm 18.40 410.85 427.74 - - 7,870.42 - -

aggregate 12.5 mm nominal size derived from natural soueces.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3

manufactured sand (zone-III) derived from natural sources : 6 graded stone aggregate

18 4.17 20 mm nominal size derived from natural sources over 75mm thick bed of dry brick Sqm 37.50 749.30 780.10 - - 29,253.89 - -

ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand,

including necessary excavatin, levelling & dressing & finishing the top smooth.

20 5.9 Centring and shuttering including strutting, propping etc. and removal of form for: - - - - - -

21 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. sqm 44.78 392.15 408.27 - - 18,280.35 - -

22 5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm 110.50 927.25 965.37 - - 1,06,673.30 - -

23 5.9.5 Lintels, beams, plinth beams, girders, bressummers and cantilevers. Sqm 82.40 736.40 766.67 - - 63,173.89 - -

24 5.9.6 Columns, Pillars, Piers, Abutments, posts and Struts Sqm 127.46 961.30 1,000.82 - - 1,27,566.90 - -

25 5.22 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in - - - - - -

position and binding all complete above plinth level.

26 5.22.6 Thermo-Mechanically Treated bars of grade Fe- 500D or more. kg 1356.95 107.85 112.28 - - 1,52,363 - -

27 5.22 A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in - - - - - -

position and binding all complete above plinth level.

28 5.22A.6 Thermo-Mechanically Treated bars of grade Fe- 500D or more. kg 838.80 107.85 112.28 - - 94,184 - -

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement

concrete work, using cement content as per approved design mix, manufactured in fully

automatic batching plant and transported to site of work in transit mixer for all leads,

having continuous agitated mixer, manufactured as per mix design of specified grade

for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to

29 5.33 site of laying , excluding the cost of cantering, shuttering finishing and reinforcement, - - - - - -

including cost of admixtures in recommended proportions as per IS : 9103 to

accelerate/ retard setting of concrete, improve workability without impairing strength

and durability as per direction of the Engineer - in - charge.

(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement

used as per design mix is payable/recoverable separately).

30 All works upto plinth level - - - - - -

31 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 13.57 9504.75 9,895.49 - - 1,34,277 - -

32 All works above plinth level upto floor V level - - - - - -

33 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum cum 8.39 9860.40 10,265.76 - - 86,109 - -

Digitally signed by

ISTPage 45 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5

in foundation and plinth

36 6.1.2 Cement mortar 1:6 (1 cement: 6 coarse sand) Cum 23.74 7,132.25 7,425.46 - 1,76,289

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

38 6.32 Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in - - - - - -

superstructure above plinth level up to floor five level in :

Half brick masonry with non modular fly ash bricks of class designation 10, conforming

to IS: 12894, in superstructure above plinth up to floor V level.

42 8.0 CLADDING WORK - - - - - -

Providing and fixing 18mm thick gang saw cut mirror polished remoulded and

repolished) machine cut for kitchen platforms, vanity counters, window sills , facias and

similar locations of required size of approved shade, colour and texture laid over 20mm

43 8.2 thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white - - - - - -

cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc. complete at all levels.

44 8.2.3 Granite stone slab of all colourand texture expect black,Cherry/ Ruby Red - - - - - -

Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including

46 8.3 machine polishing to edge to give high gloss finish etc. complete as per design approved - - - - - -

by Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

48 8.4 and drops of width up to 150 mm with epoxy resin based adhesive, including cleaning metre 4.00 568.55 591.92 - - 2,367.69 - -

Extra for providing opening of required size & shape for wash basins / kitchen sink in

49 8.5 kitchen platform, vanity counters and similar location in marble / Granite / stone work Each 2.00 978.70 1,018.93 - - 2,037.87 - -

including necessary holes for pillar taps etc. Including rubbing and polishing necessary

Providing wood work in frames of doors, windows, clerestory windows and other

51 9.1 frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners - - -

of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing 19 mm thick both side balancing laminationfactory pressed BWP

grade marine ply as per IS : 710 of approved brand

boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws

53 9.169 etc. complete as per direction of Engineer-incharge Sqm 8.46 2593.15 2,699.75 - - 22,839.92 - -

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)

54 9.21 non-decorative type, core of block board construction with frame of 1st class hard wood - - - - - -

and well matched commercial 3 ply veneering with vertical grains or cross bands and

face veneers on both faces of shutters :

55 9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 12.60 2392.65 2,491.01 - - 31,386.75 - -

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on

all edges of flush door shutters (over all area of door shutter to be measured).

Extra for cutting rebate in flush door shutters (Total area of the shutter to be

Providing & fixing bright finished brass 100mm mortice latch and lock with 6 levers and

58 9.76 a pair of lever handles with necessary screws etc. complete (Best make of approved Each 2.00 854.65 889.78 - - 1,779.57 - -

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating

59 9.96 not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or - - - - - -

shade with nuts and screws etc. complete:

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less

61 9.97 than grade AC 10 as per IS : 1868 ) transparent or dyed toreqired colour or shade with - - - - - -

necessary screws etc.

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less

63 9.100 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade - - - - - -

with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic

65 9.101 coating not less than grade AC 10 as per IS :1868) transparent or dyed to required - - - - - -

colour or shade with necessary screws etc. complete:

Digitally signed by

ISTPage 46 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Providing & fixing special quality bright finished brass Cupboard or ward robe locks with

67 9.79 four levers including necessary screws etc. complete (best make of approved quality). - - - - - -

Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe

shutters, including fixing with necessary screws etc. complete.

71 9.114.2 Double strip (horizontal type) Each 2 39.7 41.33 - - 82.66 - -

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in

72 9.127 gloss / matt / suede finish with high density protective surface layer and reverse side of - - -

adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of

approved quality.

Providing and fixing factory made uPVC glazed/wire mesh windows/comprising of lead

free uPVC multi-chambered frame, sash and mullion/coupler (where ever required)

extruded profiles having minimum wall thickness of 1.7 mm for series R1 and R2

profiles and 2.1 mm for series R3 and R4 profiles confirming to EN:12608 in any shape,

colure and design duly reinforced with galvanized mild steel section made of required

shape & size as per CPWD Speifications ,upvc extructed glazing beads ,interlocks and

inline sash adaptor (where ever required ) of appropriate dimension ,EPDM gasket,

stainless steel SS 304 grade fastners of minimum 8 mm dia with countersunk head

,comprising of matching polymade PA6 grade sleeve for fixing frame to finishing wall as

74 9.147A per IS 1367 : Part 1 to 14 coated) casement handles, G.I fasteners 100 x 8 mm size - - -

for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless

steel screws etc. Profile of frame & sash mullion ( if required ) shall be mitred cut and

fusion welded /mechanically jointed duly sealed at all corners, including drilling of holes

for fixing hardware's and drainage of water etc. After fixing frame the gap between

frame and adjacent finished wall shall be filled with weather proof silicon sealant over

backer rod of required size and of approved quality, all complete as per approved

drawing comprising to CPWD Specification & direction of Engineer-in-Charge. section of

steel reinforcement and cross section of UPVC Profile to be as per design approved by

Engineer-in-Charge.

Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without

75 high performance coatings as per design requirements and conforming to IS: 3548 & - - -

IS: 16231 shall be paid separately

76 Note:- Structural design proof checked from a Government Engineering Institute, to be - - -

provided by the manufacturer for

77 (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 - - -

78 (ii) Sites with structure height more than 20m for all wind speeds - - -

Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm &

79 9.147.A1.3 above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every Sqm 9.00 9628.6 10,024.43 - 90,219.89

panel along with multi-point locking system (Height above 1.8m)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S.

flats, square or round bars etc. including priming coat withapproved steel primer all

81 9.48.1 Fixed to steel window by welding kg 72.00 219.1 228.11 - - 16,423.72 - -

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers

(wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index

of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and

screwed with full body threaded star headed SS screws having minimum frame density

82 26.86 of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum - - - - -

compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to

spread of flame of Class A category with property of being termite/borer proof,

water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS

dash fasteners of required dia and length complete as per direction of Engineer-In-

Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

83 Note: For WPC solid door/window frames, minus 5 mm tolerance in profile dimensions - - - - -

on plus side shall be acceptable but no extra payment on this account shall be made

Digitally signed by

ISTPage 47 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

board one side white color and other side of board laminited with pvc foil of minium 14

micron thickness of approved design pasted with hot melt adhesive for cup boards,work

station and bathroom /kitchen cabinet etc.of required sizes comprising of virgin polymer

of K (value 58-60 (suspension grade ), calcium carbonate and natural fibers (wood

powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12

for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of

85 26.89 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of - - - - -

elasticity 850 N/mm2 and resistance to spread of flame of Class A category with

property of being termite/borer proof, water/moisture proof and fire retardant and

fixing with stainless steel piano hinges /soft close clip on concealed hinges of required

size with necessary full body threaded star headed counter sunk S.S screws, all as per

direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft clip on

concealed hinges and necessary S.S screws shall be paid separately).

87 NS-18 Providing and fixing Magic eye with all respect complete. Each 1.00 - - 164.45 - - 164.45

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan

clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with

89 10.18 its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ Each 2 220.65 229.72 - - 459.44 - -

M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners.

Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary stainless steel nuts and bolts

complete, i/c fixing the railing with necessary accessories & stainless steel dash

90 10.28 fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side Kg 3.00 772.40 804.15 - - 2,412.46 - -

of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for

payment purpose only weight of stainless steel members shall be considered excluding

fixing accessories such as nuts, bolts, fasteners

91 10.29 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with - - -

M.S. Flat 15x3 mm and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both

93 11.0 FLOORING WORK - - - - - -

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS: 15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse

94 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the - - - - - -

joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done

with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

95 11.41A.1 Double charge vitrified tile polished finish of size - - - - - -

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved

97 11.38 make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 sqm 1,369.37 - 11,639.66 -

mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and

matching pigments etc., complete. 8.50 1315.3

Providing and laying Ceramic glazed Wall tiles of size 600x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved

98 NS-56 make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 sqm 45.36 - - 1453.489485 65,930.28

mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey

cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and

matching pigments etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement

99 11.56 mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing - - - - - -

with white cement slurry admixed with pigment of matching shade including rubbing ,

curing and polishing etc. all complete as specified and as directed by the Engineer -in-

100 11.56.2 Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red sqm 91.20 3071.05 3,197.30 - - 2,91,593.84 - -

Digitally signed by

ISTPage 48 of 103

DSR-2023 DSR-2022 E/M Amount (DSR- Amount (DSR

Rate (incl. CF DSR 2022 Rate (incl. CF 2023) Civil 2022+GST

S.N. DSR -2023 DESCRIPTION OF ITEM UNIT Qty DSR.2023 Rate -NS NS AMOUNT

0.973 + CI E/M Rate 0.973+CI with correction 6.33%) E/M with

7%) 4.08% ) factor correction factor

Providing and fixing 1 mm galvalume roof sheet AZ-150 ,660 MPA including ridge,

102 NS-1 flashing over lapping etc complete plan area should be measured nothing extra shall sqm 120.00 - - 598.01 - - 71,760.85

be paid for lap, profile. ( valley creast etc)

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm Painting top

of roofs with bitumen of approved quality @ 17kg per 10 sqm

103 12.15 impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the sqm - - - - -

slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil

104 12.15.1 With residual type petroleum bitumen of grade VG -10 sqm 120 166.2 173.03 - 20,763.90 - -

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses

105 10.16 etc., including cutting, hoisting, fixing in position and applying a priming coat of - - - - -

approved steel primer, including welding and bolted with special shaped washers etc.

106 10.16.1 Hot finished welded type tubes kg 792.00 194.4 202.39 - 1,60,294.29 - -

107 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm Each 2 54.7 56.95 - 113.90 - -

diameter and weighing not less than 440 grams.

108 13.0 FINISHING WORK - - - - -

109 13.4 12 mm cement plaster of mix : - - - - -

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1

111 13.11 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 Sqm 200 518.55 539.87 - 1,07,973.52 - -

cement : 6 fine sand).