Complete repairing of 50 HP VT Pump, 50 HP VHS Motor, starter etc an rectification of fault time to time and keeping the pumping machinary in good condition for the peroid of One year for smooth running of pumping at Head Works Rohana at Naga

Labour charges for removing and dismentling assembling and re-erection of 50 HP VT pump 1 at Mahadula head works site up to 6stages ( Without motor.) after repairs

Providing and fixing new immpeller shaft SS 304 ,size 45 mm x 2 mtr as per sample for bowl assembly .

Providing and fixing new suction case bush , gun metal as per sample for bowl assembly

Providing and fixing new discharge case bush , gun metal as per sample for bowl assembly

Providing and fixing new , gun metal bushes for bowl assembly of pump as per sample.

Providing and fixing new , rubber bushes for bowl assembly of pump as per sample.

Providing and fixing SS collet for bowl assembly of pump as per sample for immeller fixing on shaft.

Providing and fixing impeller neck ring as per sample

Providing and fixing bowl neck ring CI as per sample

Providing and fixing rubber bushes for guide spider as per sample

Providing and fixing gun metal bush for gland box as per sample

Repairing of rachet as per size and sample ,casting , machining etcwith roller 4 nos and key etc complete

Providing and fitting SS Nut bolts with 2 washers for bowl assembly and column assembly joints

Gun metal bush for gland box as per sample

Metel filling welding , machining , turning , threading and finishing of line shaft as per sample

Providing and fitting of SS shaft sleeve of line shaft as per sample

Transportation of pump and other material from Rohna head works to Nagpur and back at site with loading unloading .

Providing and fixing gland rope to pump 50 hp with lifting of motor at site with test and trial

Rectification of any fault of pumping machinery or electrical site either in motor terminal leads, starters, wiring burnt out, at site in emergency whenever required with site visit by skilled person ,checking,testing fault rectification with his own traveling arrangement with labours and material.

providing Epoxy painting black colour To column assembly 250 mm dai x 1.5 meter = 7 nos complite job with rubbing and painting

IProviding and fixing new line shaft SS 304 ,size 45 mm x 2 mtr in length as per sample

Providing & Fabricating MS new strainer for pump size 300 x 350 with net bolt jali & complite job

Providing and fixing thurst bearing SKF 7316 BECBM or equavalent for VHS Motor 50 hp

Providing and fixing bottom bearing SKF 6311 2RS1/C3 equavalent for VHS Motor 50 hp

Varnishing of 50 hp VHS Motor by Dr. Bake warnish with heating , beking complete job

Providing and fixing motor shaft SS 42 mm dia long 2.5 mtr as per sample

Providing and fixing terminal plate for VHS Motor 50 hp no 1 and 2

Providing and soldering motor terminal inner lead at site with luggs and stud and washers

Complete rewinding of 50 hp VHS Motor with proper guage of copper wires with original speed testing and transportation at Nagpur with loading and unloading complete job

Rewinding of Auto Transformer with copper winding od 50 HP ATS of starter testing and transportation at Nagpur with loading and unloading complete job

Repairing of starter 50 hp at site with providing and fixing contactor ,wiring repalacement

Providing & erecting 3 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCBn provided enclosure on iron /GI frame as per

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting ardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates

Supplying and erecting 525 V 3 phase, 50 Hz., MPP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of metalised polypropylene condensers (MPP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary.

Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 9300 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 1 Years warranty as per specification No FG-ODF/FLS2

Black epoxy painting to valves, pipes in pump house at H W ,provision for providing and errecting 12.5 hp monoblock pump in the bed of River Kanhan for lifting raw water from river to jack well with repairing pump, supply of miscl starter.foot valve pipes etc

Providing, erecting commissioning & giving satisfactory test and trial of Self Water lubricated Vertical Turbine Pumps having Stainless Steel impeller, Stainless Steel Shaft, Discharge head , bowl assembly & column assembly Suitable Mtrs.or actual length suitable to discharge against total head from all sources including all allied accesories as given below with TPI ( 50 HP )

Providing,errecting,commissioning,testing vertical solid shaft 1500 RPM SPDP Squirrel cage Induction motor etc complete vertical flange mounted salid shaft motor(min 50 H.P.)

Providing, erecting and testing Glyscerine filled pressure gauge Bourdon's type of 150 mm dia as per IS 3624 : 1987 with brass cock, syphon tube etc.as per standerd specification.

Providing erecting and giving test and trial of Fully Automatic, Auto Transformer Starter with Air Break Contactor, assembled locally with contactors of approved make in 14 SWG sheet steel fabricated, floor mounted type cubical panel, suitable for operation on 380 - 440 Volts, 3 Phase, 50 Hz, fitted with accessories as below. The incoming and outgoing cable end boxes shall be on either sides of main panel. The cable entries from auto transformer shall be totally enclosed in sheet metal. The starter shall have screened louvers on both sides, as per specification.Cubical Panel Size 1.25 m height X 0.75 m width X 0.45 m deep. with testing at site manfuators work 50 HP

Providing, lowering, laying, jointing, Commissioning & Giving test and trial of XLPE insulated , armoured cable, ISI Marked, 1100 Volts grade with stranded or solid conductor as per detailed specification. 3 Core70 sq mm Allum Armoured ( For Motor + Starter )

Providing and making 200 mm dia flanged joints to the M.S.D.F./C.I.D.F. pipes & specials as per detailed specification and approved layout of pumping machinery, and of size as below mentioned.200 mm

Providing and erecting 2 HP submersible pump

Providing and erecting 25 HP submersible pump

Rewinding of 2 HP submersible pump

Rewinding of 25 HP submersible pump