Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹4.0 L
EMD Value
₹7,967
Closing Date
27 Oct 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
AE_NABANNA_SUB_DIVISION_PWD
Assistant Engineer, Nabanna Sub-Division, PWD 325, Sarat Chatterjee Road, Howrah-711102
Emergent Creation of office cabin of The Private Secretary to the HMIC Agriculture along with carpentry works at his proposed office cabin and adjacent area at ROOM NO-307 Nabanna Howrah during the year 2026-27
2026_WBPWD_5077524_2
WBPWDAENSD/NIET02NSD/26-27
Open Tender
CIVIL WORKS
Percentage
10 days
NABANNA
Please refer Tender documents.
5 documents required · 5 mandatory
₹7,967
Yes
5 Oct 2026
5 Oct 2026
29 Oct 2026
6 Oct 2026
27 Oct 2026
6 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | 118.15 | kg | 495.05 | ₹58,490.16 |
| 2 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 4.2 | nos | 3,167.95 | ₹13,305.39 |
| 3 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete. | 2 | each | 983.15 | ₹1,966.3 |
| 4 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. :
1.5 mm thick | 57.44 | sqm | 1,045.95 | ₹60,082.51 |
| 5 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineerin- charge | 12 | each | 414.2 | ₹4,970.4 |
| 6 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm | 2 | each | 358.4 | ₹716.8 |
| 7 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | 2 | each | 121.65 | ₹243.3 |
| 8 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. | 2 | each | 868.95 | ₹1,737.9 |
| 9 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS : 710 of approved brand boxes, shelves, racks,almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-incharge. | 10.56 | sqm | 2,593.15 | ₹27,383.66 |
| 10 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. : Marine plywood conforming to IS: 710 | 65.94 | sqm | 2,486.25 | ₹1,63,943.32 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.29 MB
Tendernotice_2.pdf
PDF • 1.30 MB
BOQ_5175238.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .