Repair/replacement of HT/LT OH line, UG cables and LT panels and misc HT/LT line works

Supply and erect 2 pole structure complete on 11 meter steel tyubular pole consisting of anti climbing device, PCC foundation and cross arms complete all as specified and directed by Engr -in- Charge.

Supply and fix lightning arrestor HT 11 KV 10 Ka station class complete

Supply and stacking and spreading levelling at site stone gravel 40mm size for transformers complete. (2x3x3x.45=8.1 cum)

Supply and fixing 65x65x6mm thick angle iron embeded to existing PCC block for chain link fencing complete. (2x125 = 250 kgs)

Providing and fixing GI chain link fencing of required mesh size 50x50mm grade of GI wire 3mm dia complete all as directed (2 Nos16x 2= 288 sqm)

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cables/pipes etc. and getting out in soft/loose soil complete all as specified and directed.

Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed.

Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. NOTE : Punned thickness shall be measured only.

Supply and laying dry well burnt locally available brick sub class 'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.