REPAIR/MAINT OF VARIOUS TECHNICAL ASSETS INCLUDING CAMOUFLAGE PAINTING, WORK SERVICES FOR REPAIR/MAINT OF B/R AND E/M NATURE AT VARIOUS DBS AND REPAIR/MAINT OF OLD/UNSV CABLES IN LOGISTIC SEC AND ADJACENT AREA ALONG WITH CONNECTED ITEMS AT AF STN HA

Amount

Taking down cement plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises, complete all as specified and directed.

Material & labour for rendering 15mm thick in cement mortar (1:4) in two layers (10mm thick in first layer and 5mm thick in second layer) finished even and smooth without using extra cement mixed with water proofing compound as per manufacturer’s instructions in top layer, complete all as specified and directed. (Note : WPC shall be measured & paid separately)

Supply only liquid water proofing compound of approved quality, complete all as specified and directed (Make : CICOO No 1/SIKA/ACCO PROOF/Dr. FIXIT)

M&L for rendering 10mm thick plaster in CM (1:6) on fair faces of brick work or concrete surface, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for applying two coats of oil bound distemper over a coat of wall primer over a coat of 1mm thick wall care putty on wall including preparation of new surfaces of walls, complete all as specified and directed.

M & L for finishing walls with acrylic smooth exterior paint of required colour and shade (two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed.

M & L for preparation of old painted surfaces of wall, chajja, facia, cornices, parapet etc and applying one coat of exterior emulsion paint upto four storeys height, complete all as specified and directed.

M & L for preparation of surfaces incl brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts overall decorated plastered or un plastered surfaces of wall incl cornices etc and applying one coat of white wash upto four storeys building, complete all as specified and directed.

All as per item No. 09 here in before but applying one coat of oil bound distemper on wall, complete all as specified and directed.

M&L for plaster of 15mm in CM (1:3) n.exc 1 Sqm each patch, on brick walls, finished even and smooth without using extra cement including taking down old cement plaster on brick walls, concrete surfaces raking out joints, hacking for key, scrubbbing down with water etc. and finished the surfaces by matching of exiting colour finish, complete all as specified and directed.

M & L for preparation of old painted steel surfaces of roof of any description over 10cm width or grith and applying one coat of antisol roof paint, complete all as specified and directed.

Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars but excluding ashlar facings, dressed stone work and precast concrete articles etc removing rubbish off the premises, complete all as specified and directed

M & L for brick work with sub class 'B' bricks (old size bricks) straight or curved on plan exc 6m mean radius built in cement mortar (1:6), complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and rubbish off the premises, complete all as specified and directed

M & L 75mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in sub base, hard standing, plinth protection and similar works etc. surfaces finished even and fair, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rail and fastening and heavy brackets framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc Fe 410W (Gde E-250), complete all as specified and directed.

Dismantling of asbestos cement sheets (corrugated, semi corrugated etc.) of any thickness including ridges, hips, valley as in roof covering, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M &L for PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in base for columns/post/pole or in mass concrete including necessary form work, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with gray cement and pigment, laid over and including 15mm thick screed bed in CM (1:6) over subbase, complete all as specified and directed.

Excavation in trenches not exc. 1.5m in depth and not exc. 1.5m in width including getting out for laying of pipes etc including forming bottom surface to required level in soft/loose soil, complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 25cm thick, complete all as specified and directed.

Removing surplus soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m high from the starting point, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

All as per item No. 27 here in before but 80mm dia, complete all as specified and directed.

Material & Labour galvanized iron tubing 40mm bore (light grade) with all fittings for protection of cables, laid in trenches, complete all as specified and directed. (Note:Excavation and earth work shall be measured and paid separately)

All as per item No. 29 here in before but 50mm bore, complete all as specified and directed.

Material and labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 25 sqmm 3.5 core including taking up old u/s LT UG cable, complete all as specified and directed. Note : Excavation and earth work shall be measured and paid separately under respective items

All as per item No. 31 here in before but 16 sqmm 4.0 core, complete all as specified and directed.

M & L for horizontal boring under the road (with manual method) below 1m from the road surface and dia of hole not exc 100mm, without damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work and providing HDPE/DWC pipe of 80mm dia suitable for 0.4 mpa working pressure, complete all as specified and directed.

Supply and fixing LED light fitting 1 x 16 Watt flame proof, CMRI certified recommended for gas/vapour group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures, driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable (ZHFR) and flexible steel conduit of suitable size upto nearest ceiling rose, complete all as specified and directed. (Make : Bajaj/Crompton Greaves/Sudhir/Shyam Switchgear)

S&F switch flame proof, rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and directed. (Make : Bajaj/Crompton Greaves/Sudhir/Shyam Switchgear)

Taking down/out unserviceable UG cables of cross sectional area upto 120 Sqmm and connections including bricks, GI Pipes, etc of any description, laid in trenches and/or fixed with walls/poles, complete all as specefied and directed.

Relaying serviceable LT UG cable any size in trench/floor/pole including connecting up, complete all as specified and directed. Note : for item No. 36 & 37 (i) Cost of earth work is included in quoted rate and cost of DWC HDPE duct pipe of suitable dia shall be measured and paid separately under respective item of BOQ).

Material and labour for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross- sectional area 120 Sqmm 3.5 core including taking up old u/s LT UG cable, complete all as specified and directed. Note : Earth work and connected items shall be measured and paid separately under respective items

All as per item No. 38 here in before but 95 sqmm 3.5 core, complete all as specified and directed.

Supply, fabricating, installing, testing and commissioning of OUTDOOR type LT feeder pillar box of bus bar capacity 400 Amp of suitable size factory fabricated, floor mounted double door, dust and vermin proof , powder coated , CPRI approved made out of 3.15mm thick CRCA sheet mounting on 50x50x5 mm Angle iron supports at the base duly painted synthetic enamel paint and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including all busbar of copper bus bar strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply including suitable size copper conductor control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with and including the following accessories,complete all as specified and as directed. (a) INCOMING (i) MCCB 200 Amps 4 pole 415 Volt 25 KA breaking capacity - 01 No Make : L & T / Schneider / Legrand / ABB /Havell's. (b) OUTGOING (i) MCCB 100 Amp 4 pole 415 Volt 16 KA Breaking Capacity - 03 Nos Make : L & T / Schneider / Legrand / ABB /Havell's. (ii) MCB 63 Amps, AC 4 pole 415 Volt 10 KA Breaking Capacity - 03 Nos Make : L & T / Schneider / Legrand / ABB /Havell's. (iii) MCB SPN 63 Amp 'C' Series , 10 KA - 04 Nos Make : L & T / Schneider / Legrand / ABB /Havell's.

S & F in repair MCB DB TPN 4 way IP 43 protection ,double door concealed on wall, complete all as specefied and directed. Make : L & T / Schneider / Legrand / ABB /Havell's

Supply and fix MCB SPN 6 to 32 Amp 'C' Series,10 KA, complete all as specified and directed Make : L & T / Schneider / Legrand / ABB /Havell's

Supply and fix MCB 63 Amp 4 Pole 'C' Series,10 KA, complete all as specified and directed Make : L & T / Schneider / Legrand / ABB /Havell's.

S & F junction box made from SMC/FRP sheet ready made Junction box of size 310 X 285X 180 mm with aluminium bus bar of 50 Amp capacity for RYB and half for neutral made in suitable size fixed inside the junction box with necessary supporting insulators fixed on hylem sheet ,MS sheet steel fixed inside the bottom portion of box to connect the cable gland complete , entire assembly fixed to pole/wall with MS clamp 25 X 5 mm and nuts & bolts, including MCB SP 6 Amp 'C' Series 10 KA 240 V - 1 No, with necessary size copper lugs for connecting cables from junction box to fittings, complete all as specified and directed. Make: Sintex (right hinged) or equivalent approved make.

M & L earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5m below ground level connected with galvanised earth strip of size 32x6mm by means of bolts, nuts, check nuts and washers protected by 40mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-0 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect and other end connected with main switch board or earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion includuing taking down old one, complete all as specified and directed.

M & L for servicing and repair of voltage stabilizer of capacity upto 50 KVA by manufacturer's rep after disconnecting all electrical connections of stabilizer and check the auto/manual function of stabilizer, to check the oil level, oil seal leakage if any, check voltmeter and Amp meter working condition or not. Taking out top cover of stabilizer for replacing defective spares/items, cleaning the dust by air blower, check the neutral and earthing connections properly to check all nuts, bolts tightening and refixing the same in existing position and reconnect all the incoming/outgoing cables properly including testing and commissioning, complete all as specified and directed. Note :- (i) Replacement of defective spares for making the voltage stabilizer units in satisfactory working condition shall be measured & paid separately under respective items) (ii) Labour charges for taking out old spares & refixing of new spares shall deemed to be included in unit quoted rate.

All as per item No. 46.00 here in above but 75 KVA to 150 KVA, complete all as specified and directed.

All as per item No. 46.00 here in above but 200 KVA, complete all as specified and directed.

All as per item No. 46.00 here in above but 500 KVA, complete all as specified and directed.

Supply only electronic servo circuit card (PCB), complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT LTD.

Supply only servo control panel, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT LTD.

Supply only trigger (control) transformer 9V/18V, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)

Supply only carbon brush, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 8 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 10 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 20 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 40 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 60 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 125 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only dimmer 200 Amps, complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only ammeter with CT digital with connection controlling switch complete (suitable size and shape), complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only voltmeter 0-400 volts flush type with connection controlling switch complete (Suitable size and shape), complete all as specified and directed. (Make:- AE/MECO/ L & T (RISHABH)/AMTL/SECURE/ C & S ELECTRIC/ DUCATI/ RAAS CONCORD)

Supply only servo motor 3 Kg torque single phase with RC, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)

Supply only servo motor 10 Kg torque single phase with RC, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)

Supply only servo motor 20 Kg torque single phase with RC, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)

Supply only rotary switch 5 Amp for R.Y.B phase, complete all as specified and directed. ((Make:- AE/ L & T (RISHABH)/SECURE/ C & S ELECTRIC/HAVELLS/ ANCHOR)

Supply only PCB holder, complete all as specified and directed. (Make:- AE/ APLEB/ ANDREWYULE /SINETRAC/ VOLINA/ VINITEC/ IECO/ V-GUARD/ INDIAN TRANSFORMER & ELECTRICALS PVT. LTD.(GURGAON)

M & L for rewinding main transformer of any capacity complete wounded with super enamel insulated/DPC/DCC Copper conductor (ISI marked) of suitable guage as per existing, complete all as specified and directed.

M & L for refilling/topping up/replacement of stabilizer oil with new dehydrated stabilizer oil. Open lid cover of stabilizer including changing of gasket set if required complete and re-fixing of top lid cover without any damage to stabilizer suitable for working voltage 440 volts grade including necessary dehydration to achieve dielectric strength min 40 KV including internal/external connection and testing on load of stabilizer, complete all as specified and directed. (Make:- HPCL(SEETAL)/ HP (SEETAL)/ SERVO/GULF/ CASTROL) Note: An amount of Rs.79105.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S. VINITA CONSTRUCTION

M/S ANNI ENTERPRISE

M/S DEY ENTERPRISE

CONSTRUCTION SHELTER

M/S MANODEEP CONSTRUCTION

M/S BIJAY KUMAR SHIVA

M/S RATHIN ENTERPRISES