Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 CrAccepted-AOC | ₹15.8 Cr | L1 | Accepted-AOC Being lowest and reasonable |
| 2 | L2₹20.6 CrRejected-Finance NO 15 B 2ND FLOOR 4TH CROSS T ASHWATHNARAYANA ROAD THIMMAIAH NAGARA YELAHANKA BANGALORE 560 064 | BANGALORE | BANGALORE | KARNATAKA | 560064 | ₹20.6 Cr | L2 | Rejected-Finance Not being lowest |
Tender Value
₹9.0 Cr
EMD Value
₹9.2 L
Closing Date
17 Feb 2020, 6:00 pmClosed
HQ Chief Engineer Shillong Zone
HQ Chief Engineer Shillong Zone, Spread Eagle Falls, Shillong, Meghalaya, 793011
CONSTRUCTION OF TECH BLDG UNDER PARA 35 AND 38 AT GANESHBARI UNDER GE DINJAN
2019_MES_283437_1
CESZ/DIN/08 OF 2019-2020
Open Tender
Civil Works
2010 days
Dinjan
As per Tender Documents
2 documents required · 2 mandatory
₹3,000
GE DINJAN
₹9.2 L
HQ Chief Engineer Shillong Zone
8 Aug 2020
19 Sept 2019
19 Feb 2020
19 Sept 2019
17 Feb 2020
3 Feb 2020
20 Sept 2019 - 28 Sept 2019
30 Sept 2019
Amount
Note:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender document, all drawings & all corrigendum / amendments and General conditions of contracts before entry/quoting the rates. Schedule 'A' Part-I(A) (PRE-ENGINEERED BUILDING WITH STEEL STRUCTURES WORKS) Note :- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs. 0.00" under Col - 5 signifies this fact only.
Construction of Block of Pre-Engineered Building with Steel Structures for TECH ACCN BLDG, PARKING & ADDN ACCN including ramp with all fittings, fixtures, etc. complete all as specified and shown on drawings.
Lumpsum Subtotal of Schedule "A' Part-I(A)
Note:- (Applicable for all parts/items/):- The bidders/contractors are advised to read tender documents, all drawings & all corrigendum/ amendments and General conditions of contracts before entering / quoting the rates. Lumpsum price worked out by the tenderer for BUILDING & STRUCTURES WORKS as listed in Schedule ‘A’ Part-I(B)
Lumpsum price workedout by the tenderer for SITE CLEARANCE, SITE DEVELOPMENTS & EARTH WORKS as listed in Schedule ‘A’ Part-II.
Lumpsum price workedout by the tenderer for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-III.
Lumpsum price workedout by the tenderer for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-IV.
Lumpsum price workedout by the tenderer for ROAD, PATH & CULVERT as listed in Schedule ‘A’ Part-V.
Lumpsum price workedout by the tenderer for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VI.
Lumpsum price workedout by the tenderer for AREA DRAINAGE as listed in Schedule ‘A’ Part-VII.
Lumpsum price workedout by the tenderer for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-VIII.
Lumpsum price workedout by the tenderer for EXTERNAL ELECTRIFICATION & LIGHTENING PROTECTION as listed in Schedule ‘A’ Part-IX.
Lumpsum price workedout by the tenderer for FIRE FIGHTING, GAS BASED FIRE SUPPRESSION SYSTEM & FIRE ALARM SYSTEM as listed in Schedule ‘A’ Part-X.
Lumpsum Subtotal of Schedule "A' Part-I(B) & Part-II to Part-X
SCHEDULE 'A' PART-XI (AIR CONDITIONING) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.
Supply, installation, testing and commissioning of Central Type Water Cooled, Chilled Water Type Air Conditioning Plant with all equipments and accessories complete (to achieve design conditions as per Appendix - 'G' of Particular Specifications) and comprising of the following:- (a) Scroll Water Cooled Chiller Unit not less than 50 TR x 03 Nos (50% of full load capacity- 02 working and 01 Standby) conforming to specification and comprising of Hermetic/semi hermetic scroll compressor, chiller, condenser, microprocessor control / sensers etc suitable for R-407C enviornment friendly refrigerant complete all as per manufacturer’s specification. Make: Blue star Model No XWC4S-052AR2 or equivalent model of voltas/ Carrier/ Trane/ York. (b) FRP cooling tower forced/ induced draft top/ cross flow type suitable for not less than 100 Ton AC plant with FRP body and base, water spray headers, cooling tower fins, fan with motor, supporting base frames, overflow with drain, connection with valve etc all complete conforming to tender specification - 02 Nos (One working + One stand by) Contd...
(c) Centrifugal type condenser water pumps (not less than 1200 LPM , head as per friction loss calculations to be carried out by the contractor) for each condenser unit complete with suitable squirrel cage induction motor for operation at 415V 3 phase 50 Hz AC supply, base plate, electric starter with over load protection and single phase protection device -02 Nos (01 working + 01 standby) (d) Centrifugal type chilled water pump (not less than 1000 LPM , head as per friction loss calculations to be carried out by the contractor) for each chiller duly insulated complete with squirrel cage induction motor for operating at 415 Volts 3 phase 50 Hz AC supply, base plate, electric starter with overload protection, single phase preventer to match the capacity of compressor - 02 Nos (one working + one stand by) (e) --- BLANK --- (f) --- BLANK --- (g) Supply, installation, testing and commissioning of MS expansion tank 1000 litre made out of 3.15 mm thick MS sheet of and insulated with 75 mm thick best quality thermocol, cement sand plaster 15 mm thick with CM 1:3 over chicken wire mesh, painting etc, all complete as per tender specification with inlet valve, float assembly, overflow drain connection with valve and flow indicator etc. (Make up water pipe line will be provided by the Deptt). Contd...
(h) Weather making unit of 100% capacity one each for each floor ( to be fixed inside AHU rooms shown on the plan & CFM as per design to be done by the Contractor) with independent control and centralized control in plant/room each comprising the following all as specified (Note: AHUs and ducting of plant shall be designed to achieve inside design conditions required as per Appendix enclosed). (j) Design and Fabrication of Ducting :- (i) S & I PGI sheet with class VII zinc, Plenum, Fusible link fire damper (1 for each AHU), supply air/return air ducting with supporting/ hanging arrangement all as specified. Thickness of duct shall be as specified (as per IS) (ii) Necessary connection for the supply and return air duct with damper and support . (iii) Supply and erection of thermal insulation of ducting with 25 mm thick class 'O' elastomeric nitrile rubber for ducting complete as specified. (iv) Supply and fix 50mm thick, 24 kg/Cum density glass wool insulation covered with Polythene bag shall be provided above false ceiling in the all AHUs and air-conditioned rooms on 2nd floor. (v) Supply and erection of acoustic insulation initial 6 mtr of ducting with 12mm fiberglass rigid board (48 Kg/m3), finished with 32G perforated Aluminum sheet with bolts/nuts/washers of GI etc all complete as per tender specification. Contd...
(vi) Supply, erection, testing and commissioning of powder coated Aluminium supply and return air grills, diffusers, dampers, fresh air grills, laminar flow terminals, etc with nuts/bolts/screws/washers etc all complete as per tender specification. (k) Supply, installation, testing and commissioning of chilled/condenser water line, valves with flanges, bolts/nuts/gaskets etc all complete with insulation interconnected to chillers, pumps, cooling towers and AHUs as specified, including Butterfly valves, Swing check valves, Pot/ Y type strainers, Balancing Valves, Globe Valves, Ball Valves, Dial type pressure Gauge with shut off and siphon, Stem thermometer, centrifugal air release valve etc. Velocity in pipe shall not exceed 1.50 meter / second. (l) Controls comprising of (one set for each unit):- (i) Pilot duty solenoid valves. (ii) Thermostatic expansion. (iii) Liquid line strainer (iv) water flow switches (v) Anti freeze thermostat (vi) capacity control thermostat (vii) 3 Way motorised driven thermostat. (viii) Humidistat and thermostat. Contd...
(ac) Indications of the operation of each of the following controls in chilling units: (i) HP cut-out (ii) LP cut-out (iii) Oil Failure (iv) Condenser water line flow switch (v) Anti freeze thermostat (vi) Chilled water line flow switch Note:- (i) This module will be mimic module showing the status of all HVAC equipments in a schematic Plan. (ii) Electrically insulated rubber matting 3/8 inches 3 feet wide for 1100 volts grade of suitable length for complete switch Board. Contd...
(p) Wall mounted indoor type panel board cubical design 415 volts dust proof fabricated out of 2 mm thick CRCA sheet and finished in powder coated paint of approved shade. All steel material shall undergo minimum seven tank treatment process before powder coating and enclosure including supplying and installing under mentioned switchgears, interconnections, painting etc as required (One for each AHU). Incoming:- (i) MCCB 4 pole of suitable capacity - 01 No (ii) 4 Strip copper busbar of suitable rating - 01 Set (iii) Voltmeter and Ammeter - 01 Set (iv) Indicating lamps (3 Nos each) - 01set Outgoing:- (i) MCCB of suitable rating for blower motor - 01 No (ii) Contactors of suitable sizes for Re-heating/Pre-heating and humidification pump - 01 Set (iii) DOL/Star Delta Starter for AHU motor suitable rating - 01 Set (iv) "ON & OFF" position indication for each outgoing -01 Set (v) 1 No SPP and thermal over load relay. (vi) 1Set On/Off indication LED with protection fuse. Contd...
(q) Two Nos of earthing as per SSR plate No 3 for motor control centre (M.C.C) desk type including all electrical items connected with aluminium strip 25 mm x 3mm size complete upto MCC. (r) Two Nos of earthing as per SSR plate No 3 for all electrical motors in the plant room including all electrical items connected with aluminium strip 25mm x 3mm size complete upto each equipment. (s) Two Nos of earthing as per SSR plate No 3 for each AHU units including all electrical items connected with aluminium strip 25mm x 3mm size complete up to AHU. (t) Supply and install makeup water tank PVC double layer of 2 x 5000 Ltrs capacity with float valve 25mm, GI medium grade 25mm overflow pipe, wash out pipe with 25 mm gate valve shall be provided on 2.0 mtr RCC staging near cooling tower. Note: Design of staging shall be got approved by contractor from GE before execution. (i) Modular AHU panels with GI sheet of 0.60 mm thick for both inner and outer casing with 25 mm PUF insulation sandwiched in between. The outer panel have pre-coating for corrosion resistance as also to provide proper finish. Contd...
(ii) Blower section with forward/ backward curved centrifugal fan with TEFC motor (IP-55 and class F insulation) static pressure minimum 50mm WG or higher pressure as per the design. (iii) Drain section with 1.2 mm SS drain pan including drain water pipe duly insulated. (iv) Filter section with pre-filter 10 Micron down to 90%. (v) Coil section with 8 row chilled water coil with inlet and outlet thermometer. (vi) Vibration isolation pads, belts etc all complete (vii) Electrical Controls Panels with starter for Blower Motor, Strip heater, Humidifier with complete controls including thermostat, Humidistat, Proportionate Thermostat. (viii) Strip heaters for winter heating /reheating coil section with stepped up contacts heating thermostats as per design by the contractor etc. (ix) Wall dry and web bulb thermometer in AHU rooms. (x) Sling psychrometer- 02 Nos, Anemometer -01 No Note :- AHU aand Reheater capacity shall not be less than following:- (aa) Ground Floor - 5000 CFM, 12 KW Reheater (ab) First Floor - 21000 CFM, 42 KW Reheater (ac) Second Floor - 21000 CFM, 30 KW Reheater Contd...
(u) Supply, install and commissioning APFC panel 80kVAr (6 steps of 2x25+2x10+2X5) suitable for 415V,3 Phase,4 Wire,50Hz AC supply system outdoor type plinth mounted with MCCB of suitable capacity as incomer with MPP-H capacitor. Panel shall be CPRI approved fabricated out of 3.15mm thick PGI sheet totally enclosed, dust/weather and vermin proof mounted on angle iron frame duly powder coated with required size of copper bus bar and control wiring with minimum1.5sqmm PVC insulated copper conductor cable, microcontroller based APFC relay with indications - 01 Job Make : CROMPTON GREAVESS/ L&T/ NEPTUNE/ SIEMENS/ABB/ BCH (BHARAT CUTTLER HAMMER) Note :- 1. AC plant room (as marked on site plan) and AHUs are shown on the Drg. Inside design conditions required are shown in Appendix 'G'. The following items are to be designed by the contractor and details as per Appendix shall be submitted for approval with supporting details and technical literature to the Accepting Officer through GE within one month of acceptance of tender:- a. Schematic diagram and details of all equipment, cable, panel, control system, pipes. b. Design and details of Head of condenser pump, chilled water pump, AHUs, Cooling coils, Ducting (Gauge shall be as per IS), Strip heaters for preheat and reheat. Starting velocity in supply air duct shall not exceed 1200 FPM. Velocity in return air duct shall not exceed 80% of supply air velocity. c. All items required for complete installation of AC plant to achieve design conditions shall be deemed to be included in this item. Contd...
SCHEDULE 'A' PART-XII (MISC B/R, E/M SERVICES) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.
Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all cost such as royalty if any, transportation, taxes etc. for area filling/ forming embankments including raising (any height from existing GL)/lowering by approved earth and including raising earth spreading in layers not exc 30cm thick each layer, watering, compaction with 8 tonne to 12 tonne power roller and finished to required size and shape etc, any high/depth from EGL. Notes : (i) Earth required for the item, shall be supplied by contractor, from out side MOD land of any lead, at his own arrangement. (ii) All cost of procurement of earth including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor. (iii) With reference to clause 3.6 of MES schedule Part-II on serial page No.21 it is clarified that measurement of the above item shall be of finished embankment/traverse of filled earth after consolidation/compaction and 5% deduction shall be made from measured and calculated volume to allow for increase in bulk. (iv) Total quantity / partial quantity of earth may not be available in Likabali area. The contractor shall bring the earth outside area and it is advised to quoted the rate considering availability of soil and its lead involved.
Material and Labour for thermoplastic reflective paint for marking of 2.50 mm minimum thickness of single coat in centre line, edge line and zebra crossing road marking of any width on bituminous surfaces of any description and width in white/yellow by indigenous modern propelled road marking machine including glass beads conforming to BS-6088 and MOST specifications including cleaning all dirt, scales, grease and foreigh material etc. complete all as specified.
Sub main wiring with four single core 35 sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit including two single core 16 sqmm copper conductor cable FRLSH as earth wire complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length.
S&F Epoxy Powder Coated MCB Distribution Board, Double Door, Vertical Type TPN 4 way for MCBs alongwith provn of MCCB as incoming with common bus bar at incoming end of outgoing MCBs complete with necessary internal wiring and fixed complete all as specified and as directed. Note :- MCCBs and MCBs will be measured and paid separately.
Sheet metal enclosure DB SPN 240 Volts 6 Way double door type with 200 Amps rated bus bar for fixing MCB.
Supply and fixing MCCB 125 amps, 4 pole, breaking capacity 16 KA suitable for operation of 415 volts AC 50 HZ including making necessary electric connections complete all as specified and directed.
Supply and fixing ceiling fan energy saving and fancy type 1400 mm(minimum) sweep three blade, without regulator including clamp set, hanging rod and necessary connecting PVC insulated Flexible cable of size 0.75 sqmm copper conductor for connection from ceiling rose to fan and connecting complete all as specified and as directed. Make: Model- ES-50 Premium of Havells or equivalent make as per Appendix 'B'.
Supply and fixing exhaust fan 300 mm (min) sweep MS CRCA body and metal blades with double bearing with self closing louvers, AC single phase 230 volts, including electrical connection with twisted three core PVC insulated flexible cord of size 0.75sqmm copper conductor from celing rose complete all as specified and as directed. Make: Model- Ventil Air - DX of Havells or equivalent make as per Appendix 'B'.
Supply and fixing exhaust fan 250 mm (min) sweep MS CRCA body and metal blades with double bearing with self closing louvers, AC single phase 230 volts, including electrical connection with twisted three core PVC insulated flexible cord of size 0.75sqmm copper conductor from celing rose complete all as specified and as directed. Make: Model- Ventil Air - DX of Havells or equivalent make as per Appendix 'B'.
Supply and fixing of LED batten surface/ceiling mounting box type light fitting 20Watt, with driver with high quality polycarbonate opal diffuser cover including & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Code No 112176 BLTRU 20W WH VIVA of BAJAJ or Cat No. STOUTPLUS600BS20WLED857SPCWH of Havells or equivalent model of make list as given in Appdix "B".
Supply and fixing of LED batten surface/ceiling mounting box type light fitting 40Watt, with driver with high quality polycarbonate opal diffuser cover including & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Code No 111708 BLTRU 40W WH VIVA of BAJAJ or Cat No. STOUTPLUS1200BS40WLED857SPCWH of Havells or equivalent model of make list as given in Appdix "B".
Supply and fixing of LED Pendant luminaires light fitting 1 x 36/40 Watt (4 feet), 230 volts, with electronic driver and made of integrated sleek extruded channel with white acrylic cover & high power LED’s as light source with LED fitting system lumen not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable and accessories of hanging arrangement, if required complete all as specified. Make : Code No 112230 BPTX 40W LED4F WH of BAJAJ or Cat No. DESTELLO70LP/S36WLED857SPMMAWH of Havells or equivalent model of make list as given in Appdix "B".
Supply and fixing of LED 'Batten integrated LED channel' surface/ceiling mounting(suspended from ceiling) box type light fitting 9/10Watt with LED Lamp , driver and made of integrated sleek extruded polycarbonate channel with white acrylic cover & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.50 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Model No 112407 BCLSB 10W WH of BAJAJ or Cat No. LUMILINEBS9WLED865SPCWH of Havells or equivalent model of make list as given in Appdix "B".
Supply and fixing of LED mirror light fitting 9 Watt with LED Lamp , drive and made with decorative grey end and caps polycarbonate body and ribbed opal diffuser complete and all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up with twin core 0.50 sq. mm copper conductor flexible wire/cable complete all as specified.
Supply , Fixing & testing of LED street light fitting (Building Security light) of 20 Watt, driver and made of pressure die-cast aluminum housing with epoxy power coated dark graphite grey colour finish and prismatic polycarbonate cover with individual lenses IP 65 & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver with efficiency > 85% with inbuilt protection against lightning, over voltage, short circuit and surge/spike protection upto 5 KV ensuring longer life (THD <10%, PF shall be > 0.95, colour temperature 5700±300 K), Life expectancy of LED's minimum 50,000 burning hrs, warranty of complete luminaries fitting shall not less than three years. The fitting shall be tested LM 79 & 80 and test certificate shall be submitted from original manufacture. The light fitting shall be fixed on pole with and including 25 mm dia( or higher size as per manufacturers recommendation) light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.5 mtr long complete with MS flat iron clamp (clamps shall be 40 x 5 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed. Make : Model No 112905 BCLST 20W LED I V2 of BAJAJ or Cat No. ENDURAPEARLSL20WLED757SASYTOPC of Havells or equivalent model of make list as given in Appdix "B".
Supply and fixing of LED surface/ceiling mounting 2 x 2 LED luminaire light fitting 34/36Watt, with driver and made of epoxy powder coated CRCA housing with high quality polycarbonate opal diffuser cover including & high power LED’s as light source with LED fitting system lumen efficiency not less than 95% Lumen per watt and electronic driver( >80% efficiency level & THD< 10%) , power factor shall be >0.95 and including all electrical accessories and connecting up with twin core 0.75 sq. mm copper conductor flexible wire/cable complete all as specified. Make : Bajaj Code 112950 BZSSQL 36W LED WH (SKYLUX LED) or Cat No. PLUTOSURFACE2X2PLS34WLED857S of Havells or equivalent model of make list as given in Appdix "B".
Supply , Fixing & testing of LED street light fitting of 45 Watt, driver and made of pressure die-cast aluminum housing, IP 65/IP 66 road way luminaries with UV stabilized polycarbonate cover or toughen glass cover & high power LED’s as light source with LED fitting system lumen not less than 95% Lumen per watt and electronic driver with efficiency > 85% with inbuilt protection against lightning, over voltage, short circuit and surge/spike protection upto 5 KV ensuring longer life (THD <10%, PF shall be > 0.95, colour temperature 5700±300 K), Life expectancy of LED's minimum 50,000 burning hrs, warranty of complete luminaries fitting shall not less than three years. The fitting shall be tested LM 79 & 80 and test certificate shall be submitted from original manufacture. The light fitting shall be fixed on pole with and including 40 mm dia( or higher size as per manufacturers recommendation) light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.20 mtr long complete with MS flat iron clamp (clamps shall be 25 x 6 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primer including connection with two core 2.50 sqmm flexible copper conductor to control street light from ceiling rose to street light fitting complete all as specified and directed. Make : Code No 169931 BRTFG 45W LED I of BAJAJ or Cat No. ENDURAPEARLNEOSL45WLED757SASYTOPC of Havells or equivalent model of make list as given in Appdix "B". Note :- For items No. 13.10 to 13.17 : Warranty of complete LED luminaries fitting shall not less than three years and Life expectancy of LED's minimum 50,000 burning hrs.
Supply & fixing of transparent street light junction box of size 205 mm x 255 mm x 112 mm made of high quality polycarbonate IP-66/67 (Dust and power jet Proof according to IEC 60529) , shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated (Class II ) made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper bus bar 25 x 5 mm -04 strip and fixing complete with 02 Nos, 25 x 3 mm thick MS clamps, nuts & bolt, etc. complete all as specified and directed. Make: HENSEL Cat No KF 2500G or equivalent model of BCH/LEGRAND
M&L for RJ-11 telephone socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover plate 1 module complete all as specified and as directed.
M& L for TV socket with transparent shutter 1 module alongwith flush metal box 1 module and front cover 1 module complete all as specified and as directed.
Supply and fixing of MS / GI hot dipped / powder coated perforated type Cable Trays 14 SWG of size 100 mm x 50 mm H with Tee, cross, horizontal / vertical bend and reducer complete all as specified and as directed.
Supply and fixing of MS / GI hot dipped / powder coated perforated type Cable Trays 14 SWG of size 150 mm x 50 mm H with Tee, cross, horizontal / vertical bend and reducer complete all as specified and as directed.
Supply and fixing of MS / GI hot dipped / powder coated perforated type Cable Trays 14 SWG of size 200 mm x 50 mm H with Tee, cross, horizontal / vertical bend and reducer complete all as specified and as directed.
Material and Labour for horizontal boring / drillling by machines / manually under the road in any type of soil without cutting / disturbing the existing road for inserting PPR pipes / CI pipe of any size complete all as specified and as directed. Note :- Pipes shall be measured and paid separately under respective schedule.
Supply and fixing pressure gauge of 100 mm dia., 0-300 PSI or 0-21 kg/sq.cm fitted with 12/15 mm dia. pad cock valve and G.I. pipe, elbow, etc. as per requirement.
Supply and fixing Cast iron flanged foot valve 100 mm dia with necessary nuts, bolts, flange, nipple with leather inside valve etc. including packing/fittings in suction line complete all as specified and directed.
Supply and fixing Cast iron flanged foot valve 150 mm dia with necessary nuts, bolts, flange, nipple with leather inside valve etc. including packing/fittings in suction line complete all as specified and directed.
Supply and fixing 40 mm dia Gun metal Non-Return valve, high pressure screwed to both ends for CPVC / GI Pipe or unions complete all as specified and directed (for 2 HP Pumpset).
Supply and fixing 40 mm dia Gun metal foot valve, high pressure screwed to ends of CPVC / GI Pipe complete all as specified and directed (for 2 HP Pumpset).
Supply, installation, fixing, testing and commissioning of Pumpsets, Centrifugal Electric Driven of capacity 2 HP, DOL starter with sheet metal enclosure including necessary coupling base frame grouting foundation with PCC platform and all electric and water connection complete all as specified and as per manufacturer's specifications.
Supply, installation, testing & commissioning of 80 Litres Capacity Seamless Cylinder CCOE Approved, complete with valve assembly and pressure gauge with a safety burst disc and a safety cap with switch in gauge. Make / Marketed By :- Honeywell/Crypto/Rotarex/Sevo/Kidde fire system/ Rama/ EKC (Everest Kanto)/ Ceasefire
Supply, installation, testing & commissioning of 120 Litres Capacity Seamless Cylinder CCOE Approved, complete with valve assembly and pressure gauge with a safety burst disc and a safety cap with switch in gauge. Make / Marketed By :- Honeywell/Crypto/Rotarex/Sevo/Kidde fire system/ Rama/ EKC (Everest Kanto)/ Ceasefire
Supply, installation, testing & commissioning of clean gas i.e. per-fluoro-ketone, Penta fluro ethane, Hepta fluoro propane (such as FM 200/ Novac 1230 gas compound of carbon, fluorine and oxygen {CF3CF2C(O)CF(CF3)2)}. Make / Marketed By :- Honeywell/Crypto/Rotarex/Sevo/ 3M/ Fitech/ Ceasefire
Supply, installation, testing & commissioning of master cylinder kit comprising of Electric Control Head operated electrically from the Detection & Control System or locally with a manual lever (or with separate discharge pressure switch) on the control head. Make :- Honeywell/Crypto/Rotarex/Sevo/ Kidde
Supply, installation, testing & commissioning Pressure Operated Control Head which allows for pressure actuation slave cylinders and is mounted directly on top of the slave cylinders valve. Make :- Honeywell/Crypto/Rotarex/Sevo/ Ceasefire
Supply, installation, testing & commissioning Discharge Nozzles as designed to provide the proper flow rate and distribution of clean gas to total flood a hazard area : 360 Degree. Make :- Honeywell/Crypto/Rotarex/Sevo/ Kidde/ Ceasefire
Supply, installation, testing & commissioning of Slave Cylinder Adapter Kit used to actuate the Slave Cylinder. Make :- Honeywell/Crypto/Rotarex/Sevo/ Kidde/ Ceasefire
Supply, installation, testing & commissioning of Discharge Hose of standard length as per OEM, 1-1/2” (use with 34, 80, 120 & 140 Ltr. Cylinders). Make :- Honeywell/Crypto/Rotarex/Sevo
Supply, installation, testing & commissioning of 1-1/2" Manifold Check Valve installed at the discharge manifold to allow removal of any FK-5-1-12 cylinder from the manifold while still retaining a closed system. Make :- Honeywell/Crypto/Rotarex/Sevo/ Kidde/ Ceasefire
Supply, installation, testing & commissioning of Flexible Actuation Hose of standard length as per OEM (Pilot pressure is directed to a pressure operated control head on each cylinder valve using 1/4 inch actuation hose). Make :- Honeywell/Crypto/Rotarex/Sevo/ Kidde/ Ceasefire
Supply, installation, testing & commissioning of Manifold / Cylinder Supervisory Switch for indication of discharge of system. Make :- Honeywell/Crypto/Rotarex/Sevo/ Kidde/ Ceasefire
Supply, installation, & fixing of of Cylinder Strap for 80 Liter Cylinder complete all as directed.
Supply, installation, & fixing of Cylinder Strap for 120 Liter Cylinder complete all as directed.
Supply, installation, testing & commissioning of Brass Male Elbow complete all as directed.
Supply, installation, testing & commissioning of M.S.seamless schedule 40 Pipe up to 50 mm dia size including all forged fittings such as tee, elbow, supports and painting as per requirement of site, etc. Pipe (S) : M.S. Seamless To ASTM A-106, SCH. 40
Supply, installation, testing & commissioning of M.S.seamless schedule 80 Pipe Manifold fabricated from seamless pipe up to 50 mm dia size including all forged fittings such as tee, elbow, supports and painting as per requirement of site, etc. Pipe (S) : M.S. Seamless To ASTM A-106, SCH. 80
Supply, installation, testing & commissioning of Conventional MCP, Green, Single Pole, Flexi Element, with BB, India manual abort switch complete all as specified and as directed.
Supply, installation, testing & commissioning of Conventional MCP, Yellow, Single Pole, Flexi Element, W/O BB, India manual relase complete all as specified and as directed.
Horn/Strobe, 12/24V, Red, Multi-Candela 15, 15/75, 30, 75, 110, 115 cd, Plain (No Lettering) complete all as specified and as directed.
Supply, installation, testing & commissioning of Conventional Photo/Thermal Detector,300 Series, LPCB, India complete all as specified and as directed.
Supply, installation, testing & commissioning of Conventional RoR Thermal Detector,300 Series, LPCB, India complete all as specified and as directed.
Supply, installation, testing & commissioning of Response Indicator (Non UL) complete all as specified and as directed.
Gas Release Panel fully complied with UL864 and NFPA-72. Panel with control unit performing dual function of detection and controlled release of gaseous agent. These panel should have 4 detection circuits and 2 agent release circuit with various programmable options. The panel should have all the safety features to prevent accidental release, easy to install, commission with user friendly programmable option. Panel should have modbus conectivity module and converter suitable to communicate with central monitoring system complete all as specified and as directed.
Supply, installation, testing & commissioning of BMS Computer System : server grade Pentium i7 Core with 3GHz minimum CPU speed, minimum of 4 GB RAM, 512 KB cache, 52x32x52x DVD/CD-RW Drive & 2 TB HDD, optical Mouse, 106 keys keyboard, 10/100 Mbps Ethernet card, USB connection & internal modem with I-7 Processor (Latest Generation), 8 GB RAM, 2 TB hard disc, 3½” disc drive, DVD writer, compatible CDROM 42” flat screen, 1200 2 800, 256 colours (Full HD) Windows 10 and shall have MS-Office installed. Make :- H.P/DELL/LENOVO
Supply, installation, testing & commissioning of BMS System Software : Web Based Graphical Software meeting the requirements in the Given I/O Summary & technical specifications including configuration and facility to create / provide the graphic mapping for all I/O Summary points, animate the Graphics, Navigation between pages, display of logs, changing the time zones, popup alarms, configurable password protection for Building Mgmt System as per Specifications. Software shall be able to communicate with LAN works, Bacnet, Modbus devices simultaneously, with unlimited users. Make :- Honeywell/Alanbradely/Siemens
Supply, installation, testing & commissioning of UL listed, BTL certified, Hardware Interface / Soft integrators with inbuilt webbrowser for third party equipment, Open Protocol Software Integration. These integrators shall be of same make as DDCs (Direct digital controllers) and shall contain all necessary ports for software intgeration of DDC Controllers - 3 Panels. Make :- Honeywell/Alanbradely/Siemens
Supply, installation, testing & commissioning of DDC Controller with I/O module, expandable to meet the IO summary listed, The controllers shall be minimum Dual Core 32 bit microprocessor based standalone working on TCP/IP on Bacnet IP with integral web browser, calender function complete with day, month, week, year etc, real time clock & 1 second scan time. DDC working on 230V AC are preferred. The DDC's shall be capable of peer to peer communication without help of communication controller / router / system interface controller / PC and shall communicate with the building LAN directly. These shall come with lockable mounting cabinets duly powder coated connector strip, internal wiring and space to house controller & relays, connector strip step down transformer, MCB, internal wiring. (Contractor shall confirm his I/O provision w.r.t requirement on basis of data point) on AHRAE approved Bacnet protocol only. DDCs shall work on either 230V power supply or shall contain UL listed SMPS in the panel. Each DDC Internal memory 128 MB and Flash Memory 64 MB. Make :- Honeywell/Alanbradely/Siemens Location :- For First Floor - 02 Each Set & For Second Floor - 01 Each Set.
Supply, Installation,Testing and Commissioning of 4 kg capacity FM 200/ HFC227ea, DLP Assembly with automatic valve CE & pie approved, connector for tube, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation. Make Rotarex/Siemens/Ceasefire/ENVOS/ Fitech
Supply, Installation,Testing and Commissioning of 6 kg capacity FM 200/ HFC227ea , DLP Assembly with automatic valve CE & pie approved, connector for tube, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation. Make : Rotarex/Siemens/ Ceasefire / ENVOS/ Fitech
Supply, Installation,Testing and Commissioning of Hooter with accessory. Make Rotarex/Siemens/ Ceasefire/ENVOS/ Fitech
Supply, Installation,Testing and Commissioning of Linear Pneumatic heat Detection Tube with all necessary fittings & supports. Make Rotarex/Siemens/Ceasefire/ firedetec/ENVOS/Fitech
Supply, Installation,Testing and Commissioning of 6 kg capacity ABC Powder type modular fire extinguishers. Make : Atasee/Ceasefire/ Safex/ENVOS/Fitech Notes for Sl Item 13.32 to 13.63 above :- 1. List of rooms where clean gas Fire suppression system is to be provided is marked on the plan. Clean gas cylinders shall be kept in the respective rooms and pipe distribution system upto nozzles shall be planned accordingly. The system should be designed by manufacturer / OEM and submitted for approval by GE before execution. 2. The Unit "Each Lot" mentioned under Sl Item No. 13.46 & Sl Item No. 13.47 shall be considered as for the complete Lot / Length of pipe required as per the design of Manufacturer's / OEM as submitted by Contractor and approved by GE. Sl Item No. 13.47 is proposed for 4 largest size rooms. 3. Testing of the system shall be done with Nitogen Gas.
Supply & laying / fixing PVC insulated and sheathed FRLS copper cable 1100 volts grade with multi-stranded copper conductor of size 1.50 Sqmm 2 core drawn in rigid steel stove enamelled black conduit 25 mm dia complete all as specified and as directed. Note :- Conduit shall be measured and paid separately under respective schedule.
Supply & laying / fixing PVC insulated and sheathed FRLS copper cable 1100 volts grade with multi-stranded copper conductor of size 4.00 Sqmm 2 core drawn in rigid steel stove enamelled black conduit 25 mm dia complete all as specified and as directed. Note :- Conduit shall be measured and paid separately under respective schedule.
Supply & fixing Sluice valve cast iron body class PN 1.0 with flanged ends drilled suitable for bore of pipe 100mm ISI marked having stainless steel spindle with iron wheel at top including necessary fixing arrangements such as Mild Steel Nuts, Bolts, Washers, Gaskets, etc. including testing, complete all as specified and as directed.
Supply & fixing Sluice valve cast iron body class PN 1.0 with flanged ends drilled suitable for bore of pipe 80mm ISI marked having stainless steel spindle with iron wheel at top including necessary fixing arrangements such as Mild Steel Nuts, Bolts, Washers, Gaskets, etc. including testing, complete all as specified and as directed.
Lumpsum Subtotal of Schedule "A' Part-XII
Lumpsum price worked out by the tenderer for Provisional Lump Sum of ` 55,000/- for following items including of earth work, concrete work, steel section etc. complete all as directed. (i) PCC Hard Standing 100 Sqm (Approx.) : 01 No Note:- (i) Contactor shall quote, contractors percentage (amount) plus/minus the pre-prices amount. (ii) The works under provisionl sum shall be executed wholly or in part and to the extent and specifications as order by the GE in writing. The work shall be measured and paid as applicable rates in MES Schedule Part-II (2010) adjusted by the contractor's percentage quoted by the tenderer for provisional sum. The items not available in MES Schedule shall be priced in terms of condition 62(G) of IAFW - 2249 and in that case percentage quoted by the contractor shall not be applicable for that particular items.
SCHEDULE 'A' PART-XIII (MANNING & OPERATIONS FOR AC PLANT) (PHASE-II) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.
Ditto all as per Sl Item No 15.01 here-in-before but for the period commencing from the next day after completion of Item No. 15.01 above.
Ditto all as per Sl Item No 15.01 here-in-before but for the period commencing from the next day after completion of Item No. 15.02 above.
Ditto all as per Sl Item No 15.01 here-in-before but for the period commencing from the next day after completion of Item No. 15.03 above.
Ditto all as per Sl Item No 15.01 here-in-before but for the period commencing from the next day after completion of Item No. 15.04 above.
Lumpsum Subtotal of Schedule "A' Part-XIII
Phoenix Infra
Bidder Name
Phoenix Infra
Enertech Pennar Defense and Engineering Systems Private Limited
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid