GE(A)/SOG-TOKEN-18/2025-26 REPAIR AND MAINTENANCE TO HOSPITAL AND OP WORKS FURNITURE AND CERTAIN FURNITURE UNDER GE (A) SURATGARH AT SURATGARH MIL STN

Amount

PEG TABLE :-FD-384 The following repairs shall be carried out to Peg Table after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board exterior grade (size of 450mmx300mm) with matching teek wood edging all around of color & texture as approved by GE.

Long rail made of Ist class hard wood (Teak wood).

Short rail made of Ist class hard wood (Teak wood).

Legs made of Ist class hard wood (Teak wood).

Centre/Side stiffener made of Ist class hard wood (Teak wood).

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be french polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.

TEAPOY : HFD-2041 The following repairs shall be carried out to teapoy after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board (sizze 600mmx600mm) exterior grade with teek wood edging all around of color & texture as approved by Engr-in-Charge.

Leg (30mm x 50mm of 450mm high)

Rail (25mm x50mm of 600mm long)

Bottom Rail (20x40mm of 600mm long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.

TABLE CENTRE : HFD-2041 The following repairs shall carried out to Table Centre after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:-

S&F of 10mm thick 800mmx550mm toughened glass with moulded edges all around

S&F of 30mm dia PVC vaccum pads as per drg

S&F of rubber shoes 35x15mm as per drg

CHAIR DINING: HFD-2030, HFD-2044 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the chair dining as approved, shown on drawing & as directed by Engr-in-Charge :-

Seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The seat & back foam shall be designed as per drg. The cushions shall be of 40 density, 50mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & colour complete all as directed by Engr-in-Charge.

M & L for polishing all over the structure with touch wood polish/ french polish after properly smoothening the old polished /painted surface by rubbing and grinding and providing a coat of wood primer complete all as specified and directed by Engineer-in-Charge.

S&F of End cap for legs

Front leg/Rear Leg/Side rails/stiffner

CHAIR EASY: HFD-2034 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the chair easy as approved, shown on drawing & as directed by Engr-in-Charge :-

Seat & Back of 75mm thick PU foam and arm rest with 50 mm thick PU foamand covered with fabric or rexine as directed and approved by Engr-in-Charge

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be french polished in as approved shade matching the color of earlier colour in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.

TABLE OFFICE CLERK (TYPE-I) : HFD-2051

Remove the unsv top form the Table and S&F of 18mm thick exterior grade pre laminated MDF board with teek wood edging all around of colour & texture as approved by Engr-in-charge

M & L for painting all over the steel structure with synthetic enameled paint of black / Grey colour matching with existing colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

S&F of Hard PVC shoes for legs as per drg

SCREEN MOVABLE : HFD-2015 The following repairs shall carried out to screen movable after removing old UNSV parts and replacing with new parts as mentioned all as directed by Engr-in-Charge:-

M & L for painting all over the steel structure with synthetic enameled paint of Ivory white colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

S&F of 50mm dia castors swivel wheel as per drg

TABLE INVALID (STEEL): HFD-2006 The following repairs shall carried out to table invalid after removing old UNSV parts and replacing with new parts as mentioned all as directed by Engr-in-Charge:-

M & L for painting all over the steel structure with synthetic enameled paint of Ivory white colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

S&F of 50mm dia castors swivel wheel as per drg

Large Top made out of 18mm thick pre-laminated MDF board (size 510mmx400mm) exterior grade with PVC edging all around of color & texture as approved by Engr-in-Charge.

Small Top made out of 18mm thick pre-laminated MDF board (size 300mmx400mm) exterior grade with PVC edging all around of color & texture as approved by Engr-in-Charge.

CHAIR CBA STEEL: HFD-2045 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the chair CBA steel as approved, shown on drawing & as directed by Engr-in-Charge :-

Seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam with PVC libing all around. The back foam shall be designed with contour lumber support for extra comfort with PVC libbing. The cushions shall be of 40 density, 50mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color complete all as directed by Engr-in-Charge.

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

S&F of Arm rests with screws as per drg. The armrests shall be made of black integaral skin polyurethne 75-85 shore 'A' hardness and reinforced with MS insert.

S&F of Hard PVC with screws shoes as per Drg

RACK ADJSTABLE 3 TIER: HFD-2064; SIDE RACK STEEL HFD-2042

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

Hard PVC shoes for legs as per Drg

CYLINDER TROLLEY : HFD-2036

M & L for painting all over the steel structure with synthetic enameled paint of Ivory White colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

S&F of 100mm dia Rubber Wheel with split pin as per drg

BED HARD STEEL : FD/E6/MAP/08(R) The following repairs shall carried out to Bed Hard after removing old UNSV parts and replacing with new parts as mentioned all as directed by Engr-in-Charge:-

Remove old unsv ply top & S & F top made out of 12 mm thick plywood board commercial grade conforming to IS:303 of Note:- Ply should fix with nut&bolt

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

S&F of Hard PVC shoes for legs as per Drg

Remove the old / unsv board and S&F of side board for Head & Foot rest of 18mm (630x310mm) MDF board of exterior grade with PVC edging all around of color & texture as approved by Engr-in-Charge.

STOOL STEEL TYPE-I: HFD-2007

M & L for painting all over the steel structure with synthetic enameled paint of Ivory white colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

S&F of Hard rubber Shoes as per Drg

TABLE 900X600 : HFD-2052

Remove the unsv top form the Table and S&F of 18mm thick exterior grade pre laminated MDF board with PVC edging all around of colour & texture as approved by Engr-in-charge

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

Remove old/unsv drawers and S&F of new drawers as per drg

S&F of Hard PVC shoes for legs as per Drg

ALMIRAH LARGE STEEL : HFD-2055

Removing unsv & S & F shelves with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F locks( 6 levers Godrej pattern of steel with duplicate key & hole cover.The keys & lock shall have embedded similar numbers for identification. Make-HARRISON/GODREJ/LINK)

Removing unsv & S & F steel anodized handles 4” grip as per sample.

Removing unsv & S & F locking assembly with cover duly painted.

M & L for denting & painting Almirah both internally and externally with synthetic enameled paint of Grey / Silver Grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

ALMIRAH MED STEEL : HFD-2056

Removing unsv & S & F shelves with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F locks, 6 levers Godrej pattern of steel with duplicate key & hole cover.The keys & lock shall have embedded similar numbers for identification. (Make-HARRISON/GODREJ/LINK)

Removing unsv & S & F steel anodized handles 4” grip as per sample.

Removing unsv & S & F locking assembly with cover duly painted.

M & L for denting & painting Almirah both internally and externally with synthetic enameled paint of Grey / Silver Grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

CHAIR VERANDAH : FD/E6/MAP/11

M & L for denting & painting chair verandha with synthetic enameled paint of black colour with spray gun after properly smoothening the surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

S&F of Hard Rubber shoes as per the drg

BED SIDE LOCKER (TP-Ops WK)

M & L for Denting & painting of locker with synthetic enamel paint of Silver Grey / OG colour after preperation of surface by cleaning & smoothening with electric grinder & applying putty/primer where necessary complete all as specified/shown on drg & directed by Engr-in-Charge.

Removing unsv & S & F locks, 6 levers Godrej pattern of steel with duplicate key & hole cover.The keys & lock shall have embedded similar numbers for identification. (Make-HARRISON/GODREJ/LINK)

Removing unsv & S & F MS steel CP handles 100mm long as per drg.

S & F CP steel conduit 19/20mm dia hanging rod with brackets 24 guage as per drg.

Removing unsv & S & F shelves all as per drg.

Removing unsv & S & F legs all as per drg.

WRITING / STUDY TABLE (TP-Ops WK)

Remove the unsv top form the Table and S&F of 18mm thick exterior grade pre laminated MDF board (1220X760mm) with PVC edging all around of colour & texture as approved by Engr-in-charge

M & L for painting all over the steel structure with synthetic enameled paint of black/OG colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

Remove old/unsv drawers and S&F of new drawers as per drg

S&F of Hard PVC shoes for legs

GI CHARPOY PLY TOP (TP-Ops Wk)

Remove old unsv ply top & S & F top made out of 12 mm thick plywood board (1980x900) commercial grade conforming to IS:303 with mild steel galvanized iron nuts and bolts of size 70x6mm with washer for each charpoy 12nos.

Remove old unsv 25mm dia GI pipe (ply support pipe) and fixing new GI pipe 25mm dia welded with long rails in equal distance as per drg

Remove unsv legs from charpoy and Supply of new legs 32mm dia GI tube med grade welded to the rails as per drg (End of all legs sealed with MS sheet)

DOUBLE BUNK CHARPOY (TP - Ops Wk)

Remove old unsv ply top & S & F top made out of 12 mm thick plywood board (1980x900) commercial grade conforming to IS:303 with mild steel galvanized iron nuts and bolts of size 70x6mm with washer.

Remove old unsv support pipe and S &F of 25mm dia GI pipe of 900mm long and welded with long legs as per drg and directed

M & L for painting all over the steel structure with synthetic aluminium paint with brush after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

BED HARD (TP-Ops Wk)

Remove old unsv ply top & S & F top made out of 12 mm thick plywood board (1980x900) commercial grade conforming to IS:303 with mild steel galvanized iron nuts and bolts with washer.

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

S&F of Hard PVC shoes for legs

Remove the old / unsv board and S&F of side board for Head & Foot rest of 18mm (630x310mm) MDF board of exterior grade with PVC edging all around of color & texture as approved by Engr-in-Charge.

STEEL CHARPOY WITH PLY TOP (TP- Ops Wk)

Remove old unsv ply top & S & F top made out of 12 mm thick plywood board (1980x900) commercial grade conforming to IS:303 with mild steel galvanized iron nuts and bolts with washer.

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

S&F of Hard PVC shoes for legs

Remove the old / unsv board and S&F of side board for Head & Foot rest of 18mm (630x310mm) MDF board of exterior grade with PVC edging all around of color & texture as approved by Engr-in-Charge. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

BED WITH PLY TOP (TP -Ops Wk)

Remove old unsv ply top & S & F top made out of 12 mm thick plywood board (1980x900) commercial grade conforming to IS:303 with mild steel galvanized iron nuts and bolts of size 70x6mm with washer for each charpoy 12nos.

Remove old unsv Head rest and S&F of 12mm thick approved shade of exterior grade MDF board Head rest (900x520mm) with bolt nuts as per drg

Remove old unsv bottom shelf and S&F of 12mm thick approved shade of exterior grade MDF board bottom shelf (900x480mm) with bolt nuts as per drg

Remove old unsv foot rest and S&F of 12mm thick approved shade of exterior grade MDF board foot rest (900x90mm) with bolt nuts as per drg

ALMIRAH LARGE STEEL (TP- OPS WK)

Removing unsv & S & F shelves with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.

Removing unsv locks from front door and locker and S & F locks, 6 levers Godrej pattern of steel with duplicate key & hole cover.The keys & lock shall have embedded similar numbers for identification. (Make-HARRISON/GODREJ/LINK)

Removing unsv & S & F steel anodized handles 4” grip as per sample.

Removing unsv & S & F locking assembly with cover duly painted.

M & L for denting & painting Almirah both internally and externally with synthetic enameled paint of Silver Grey / Grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F steel anodized handles for drawer as per sample.

TABLE STEEL / DINING TABLE (1840x925x775) : TP- Ops Wks

Remove the unsv top form the Table and S&F of 18mm thick exterior grade pre laminated MDF board (1840x925) with PVC edging all around of colour & texture as approved by Engr-in-charge

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

S&F of Hard PVC shoes for legs

TABLE STEEL (900x600) : TP- Ops Wks

Remove the unsv top form the Table and S&F of 18mm thick exterior grade pre laminated MDF board (1840x925) with PVC edging all around of colour & texture as approved by Engr-in-charge

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

S&F of Hard PVC shoes for legs

OFFICE TABLE WITH DRAWER (1220x760): TP- Ops WK

Remove the unsv top form the Table and S&F of 18mm thick exterior grade pre laminated MDF board with PVC edging all around of colour & texture as approved by Engr-in-charge

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

Remove old/unsv drawers and S&F of new drawers as per drg

S&F of Hard PVC shoes for legs

CHAIR DINING STEEL FRAME / CHAIR WITHOUT ARM : TP -Ops Wk

Remove the unsv Seat from the Dining Chair and S&F of 18mm thick exterior grade pre laminated MDF board with PVC edging all around with bolt & nuts of colour & texture as approved by Engr-in-charge.

Remove the unsv Back form the Dining Chair and S&F of 18mm thick exterior grade pre laminated MDF board with PVC edging all around with nolt & nuts of colour & texture as approved by Engr-in-charge

M & L for painting all over the steel structure with synthetic enamel paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge. Make of Paint:-BERGER/ASIAN PAINTS/NEROLAC.

S&F of Hard PVC shoes for legs

STORAGE RACK : TP - OPS Wks

M & L for painting all over the steel structure with synthetic enameled paint of black / OG colour with spray gun after properly smoothening the old dented uneven painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge. Make of Paint:-BERGER/ASIAN PAINTS/NEROLAC.

CHAIR WRITING WITH ARM : TP - Ops Wks

Remove the unsv Seat from the Chair writing and S&F of 75mm thick high 30/32 density foam fixed on 16 Gauge thick SS seat and approved colour of rexine as per drawing and existing on ground and as directed by Engr-in-charge

Remove the unsv Back from the Chair writing and S&F of 75mm thick high 30/32 density foam fixed on 16 Gauge thick SS seat and approved colour of rexine as per drawing and existing on ground and as directed by Engr-in-charge

Remove unsv and S&F of wooden hand rest as per drg and as directed by Engr-in-charge

CHAIR WRITING WITH OUT ARM : TP - Ops Wks

Remove the unsv Seat from the Chair writing and S&F of 75mm thick high 30/32 density foam fixed on 16 Gauge thick SS seat and approved colour of rexine as per drawing and existing on ground and as directed by Engr-in-charge

Remove the unsv Back from the Chair writing and S&F of 75mm thick high 30/32 density foam fixed on 16 Gauge thick SS seat and approved colour of rexine as per drawing and existing on ground and as directed by Engr-in-charge

ADJUSTABLE DESK WITH ADJUSTABLE CHAIRS Drg No :- GE (S) BTD-FD-02/07 Taking out carefully following old unserviceable parts of Adjustable desk with adjustable chairs and Supply & fixing new parts as per existing or as per drawing :-

(a) Top of desk (1050mm x 400mm) made out of 18mm thick prelaminated particle board, Exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination including 4mm thick Teak wood edging alround and tighening the frame with wooden corner complete all as per drawings.

(b) Seat of chair shall be made out of 12mm thick plywood commercial type and both side pasted with sunmica of approved shade and edging of plywood shall be french polished smoothly alround. Seat shall be half round at back side and have a slop at front side as shown as existing. size shall be 375mm x360mm and fixing by riverting with frame of chair.

(c) Back of chair shall be made out of 12mm thick plywood commercial type and both side pasted with sunmica of approved shade and edging of plywood shall be french polished smoothly alround. Back shall be curved oncave type as shown as existing. size shall be 370mm x150mm and fixing by riverting with frame of chair.

(d) M&L for gas welding around the broken joints of desk and chairs and applying one coat of red oxide primer to the welding point.

(e) Preparation of old surface of adjustable desk by de-rusting the surface and painting with one coat of synthetic enamel paint (1st quality) of approved shade as directed complete by spraying machine. Rest all as per specified and directed.

(f) Preparation of old surface of adjustable chairs by de-rusting the surface and painting with one coat of synthetic enamel paint (1st quality) of approved shade as directed complete by spraying machine. Rest all as per specified and directed.

CHAIR EASY CUSHIONED Drg No :- FD-358 Supply and fixing following parts made out of 1 st class teak wood as per drawing to after removal of old unserviceable parts :-

(a) Front leg

(b) Rear leg

(c) Arm rest

(d) Rail of seat frame

(e) Rail of back frame

(f) Seat of 75mm thick foam cushion of 32 density duly covered with Tapestry cloth as approved by GE, complete all as specified and directed by the Engineer-in-Charge

(g) Back of 75mm thick foam cushion of 32 density duly covered with Tapestry cloth as approved by GE all as specified and directed by the Engineer-in-Charge

(h) Tapestry cloth cover for seat and back of shade approved as approved by GE and directed by Engr-in-charge

CHAIR DINING LONG BACK Drg No :- FD-357 Taking down old unserviceable parts and supply fixing of new parts as specified in drg made out of 1 st class teak wood duly seasoned free of knots sizes of all members shall be as per drawing and as directed by Engr-in-charge

(a) Front legs

(b) Rear legs

(c) Stiffner

(d) Front / side / back rail

(e) Rail of back frame

(f) 50mm thick foam cushion of size, 32 density duly covered with Tapestry cloth as approved by GE,complete all as specified and directed by the Engineer-in-Charge

(g) 50mm thick foam cushion of size, 32 density duly covered with Tapestry cloth as approved by GE, complete all as specified and directed by the Engineer-in-Charge

STOOL DRESSING Drg No :- FD/E-6/MAP/14 Supply and fixing following parts made out of 1 st class teak wood as per drawing to cushion after removal of old unserviceable parts :-

(a) Legs

(b) Front Rail

(c) Side Rail

(d) 50mm thick foam cushion of 32 density duly covered with Tapestry cloth as approved by GE, as specified and directed by the Engineer-in-Charge

(e) Seat made out of 12mm thick BWR Grade ply fixed

(f) Stiffner

(g) Tapestry cloth cover for seat cushion of approved shade as approved by GE and directed by Engr-in-charge

CHAIR DINING CUSHIONED Drg No :- FD/E6/MAP/10R Taking down old unserviceable parts from CHAIR dining CUSHIONED and supply and fixing of new parts of sizes and shape of all members as per drawing and as directed by Engr-in-charge.

(a) Front leg

(b) Rear leg

(c) Side / Front / Rear Rails

(d) Stiffner

(e) Seat made from plywood 12mm thick, 5 Ply and Upholstering of chair with new tapestry cloth as approved by GE with 75mm thick foam sheet of 32 density.

(f) Vertical strip

(g) 'L' shape zinc plated flat iron 15mm x 3mm x 100mm long fixed with screw inlcuding two coat of synthetic enamel paint over a coat of primer between leg and rail to tight the whole frame.

(h) Tapestry cloth cover for seat of shade as approved by GE and directed by Engr-in-charge

RACK ADJUSTABLE 6 TIER: HFD-2064 ; STEEL RACK 1840X900X600, RACK PIGEON HOLE FD-1037

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

STEEL ALMIRAH WITH STUDY TABLE

M & L for painting all over the steel structure with synthetic enameled paint of black colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F locks, 6 levers Godrej pattern of steel with duplicate key & hole cover.The keys & lock shall have embedded similar numbers for identification. (Make-HARRISON/GODREJ/LINK)

Removing unserviceable & S & F steel anodized handles 4” grip as per sample.

Removing unserviceable & S & F locking assembly with cover duly painted.

BENCH WORKSHOP STEEL 1500X900X760 mm FD-1024

M & L for painting all over the steel structure with synthetic enameled paint of black/OG colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge. Make of Paint:-BERGER/ASIAN PAINTS/NEROLAC.

Remove old/unsv drawers and S&F of new drawers as per drg

Top of bench (1500 x 900 mm) made out of 35 mm thick hard wood planks smoothly grinded and joint together horizontally on its frame and treated with one coat of wood primer and then with two coats of synthetic enamel paint of shade as approved as shown in drg and tighening the frame complete all as per drawings.

BENCH WORKSHOP STEEL 1500X900X760 mm FD-1024

M & L for painting all over the steel structure with synthetic enameled paint of black/OG colour with spray gun after properly smoothening the old painted surface with the help of an electric grinder complete all as specified and directed by Engineer-in-Charge.

Remove old/unsv drawers and S&F of new drawers as per drg

as per Drg

Khatri Trunk Factory (BID ID -3348847)