Shifting Of 33/11 kV Overhead and Underground Cable and 2 No Transformer Shifting for Widening of Ramadevi Chauraha Under EUDD-Harrisganj Kesco. Kanpur

Loading, Carriage and unloading of poles from store to work site or vice versa

Erection of Double pole structure by digging of pit by hydra

Erection of repaired/new S.T. Pole size 9.0 Mtr. To 13.00 Mtr. With the help of crane including of Pit back filling and ramming.

Dismentalling of Damaged S.T. Pole of very Critical Position with the help of crane after remaving all the accessories from damged pole and its all related wotk including digging of pit or by cutting with gas cutter.

Grouting of pole with cement brick ballast and coarse sand as per standard specification.

Making plinth of single pole of 400 mm dia, 600 mm height (200mm underground) with C.C. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of materials.

Painting of S.T. pole with one coat of red oxide and two coats of Aluminium Paint including cost of Ist Class enamel paint.

Erection of four pole structure by digging of pit by hydra

Earthing of supports by sagging of M.S. earthing rod 20mm and connecting with earth wire and related works as per standard specifications.

Fabrication/modification of MS Item as per requirement of site

Fixing of MS Channel (100x50x6 )mm 2.4 / 2.8/ 0.35 mtr. Long/T-off

Making 33 KV Straight Through joint including digging of pit upto 1.1 Mtr. Depth.

Taking out 33kv and 11 kV 3x70 to 3x300 XLPE Cable/LT Cable except service cable from cable drum before laying and transportation of the cables from store to work site or vice-versa.

Laying of M.S. Pipe in above Digged Trench.

Laying of cable through above laid M.S. Pipe.

Laying of XLPE cables of all sizes except service cables in above digged trench covering with bricks and back filling or in RCC/RBC trench constructed by PWD/UPBCL as per standard specification and upto Pole.

Laying of 33 KV/11 KV XLPE cable by H.D.D. method

Making indoor/outdoor joints of 33KV/11KV 3x300 sqmm. Cable where the cable is being laid. Jointing Kit will be provided by the Department.

Mounting of cable box on pole, cable support structure with handling of concerning cable and proper fixing (With G.I. pipe of 3 metre )

Laying of G.I. Pipe of 40/50 mm dia along with digging of trench of suitable depth

Chopping of tree branches lying in the route of existing line touching the tree branches to the phase line conductor making fault to the feeder, for 3” to 18” dia or as per requirement of site.

Opening of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work.

Opening of L.T. Jumpers

Making of H.T. Jumpers from 3 Phase 3 Wire H.T. O.H. line for erection work.

Making of L.T. Jumpers from 3 Phase 3 Wire L.T. O.H. line for erection work.

Mounting of 11 kV Pin Insulator/Disc Insulator

Erection of 11 kV Disc Fitting

Dismentalling & Shifting of transformers along with new plinth or foundation, fencing and two no of deep bore 40 feet earthing as per standard specification

Supply and Fixing concrete Stone Route marker of 300 mm width x 150 mm thick x 650 mm height embedded in earth at least 300 mm below and 350 mm above ground level at every 100 m along the length of the cable with RCC concreting as per standard specification.

Dismentalling of binding wire from insulators and loosening of the ACSR mixed conductor on each pole then lowering down the ACSR mixed conductor & rolling into bundles.

Dismantling of M.S. Channel/X-arm/Guarding angle

Dismantling of L.T. A.B. Cable and rolling into bundles

Erection of Drop out fuse set as per standard specification.

Erection of Earth Rod complete.

Fixing of stay rod and its erection and grouting by fitting of stay clamp. Stay wire and its proper binding and tightening etc.

Loading, Carriage and unloading of ACSR Dog/Panther Conductor from store to work site or vice-versa.

Laying, Stringing & Tensioning of ACSR Dog Conductor for making jumpers on riser.

Erection of Bracing set

Loading, Carriage and unloading of earth wire/G.I. Wire from store to work site or vice-versa.

Laying, Stringing, tensioning & final sagging of earth wire/G.I. Wire.

Cross lacing of guarding by G.I. wire (approximate 5 lacing of each span).

Loading, carraiage and unloading of Aerial bunched cable from store to work site or vice-versa.

Laying of L.T. Aerial bunched cable including fixing suspension clamp with Eye Hook, Dead End Clamp with Eye Hook on erected S.T. Pole etc.

Mounting & Erection of Three Phase distribution box of A.B. Cable with Piercing Connector, L.T. Bare Neutral Connector, Alu. Lug 25 mm, L.T. Cable 1x25 mm etc.

Digging of cable trench for taking out old/damged XLPE/PILCA, 3x50 to 3x300 sq.mm 33/11 KV cable & taking out the above cable from digged trench and back filling of digged trench and relaying the same cable.

Making riser from existing earth mate of control room for making earthing support to newly erected 33 KV D/P in control room.

Making H.T. Section points by brackets, clamps & insulator, Tightening of Line, binding of conductor & proper connection.

Dismentalling of jumpering from cable box to line, cable support switchgear panels.

Re-sagging of conductor, on old line after erection of pole, binding of conductor etc.

Restoration of metallic/RCC road after proper repairing with appropriate materials.

Making L.T. Section point in L.T. New or existing line.

Laying of L.T. XLPE cable with HDPE pipe and also marking feeder name on pipe with paint HDPE Pipe provided by contractor.

Laying of L.T. XLPE cable without HDPE pipe and also marking feeder name on pipe with paint.

Repairing of damged S.T. pole by providing M.S. Angle 50x50x6 mm, 3 Nos. each of 1 Mtr. Long by clamping at 2 points its welding including its all realted work.

Connecting of newly erected network with KESCo mains including testing, commissioning and energization of the same completely.

Carriage of all concerning stock material from KESCo Store to site or vice-versa.

Kamadgeri Traders

Dixit Construction Company