Conversion of existing kitchen into modular kitchen of H-123 Type-V Qtr at Megapode Haddo under SD-IV, PBND, APWD, Port Blair

Amount

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.

Two or more coats on new work.

Providing & fixing bottom cabinets of different carcass sizes made of 18mm thick HDF MDHMR pre-laminated board (ISO:14001:2015) in partitions, Front Face panels & back boards ,each cabinet units consisting of required number of SS 304 Grade modular kitchen wire baskets as required a) Cabinet No. 01 as mention in drawing (Section A-A" ) unit of required Sizes for Cylinder Storage with Openable door shutters & with no baskets. b) Cabinet N0. 2, 3, 4 as mention in drawing (Section A-A") comprising of Top drawer for perforated cutlery baskets , Middle drawer for partition baskets & Bottom most drawer for Thali/Plate baskets , all complete of required carcass sizes, including fixing with SS 304 Grade wire baskets. c) Cabinet No. 5,6,7 and 11, 12, 13 as mention in drawing (Section A-A") comprising of Top drawer for Cup & Saucer baskets , Middle drawer for Plane/Multipurpose baskets & Bottom most drawer for Large Utensils baskets , all complete of required carcass sizes, including fixing with SS 304 Grade wire baskets. d) Cabinet No. 8 & 9 as mention in drawing (Section A-A") comprising of Top drawer for Grain Trolley baskets of 200mm ht & bottom drawer for Grain Trolley baskets of 330mm Ht , all complete of required carcass widths & Depths including fixing with SS 304 Grade wire baskets. e) Cabinet No. 10 as mention in drawing (Section A-A") comprising of Single drawer for Bottle pullout baskets of 02shelves of 430mm ht all complete of required carcass widths & Depths including fixing with SS 304 Grade wire baskets.

Including with a set of necessary soft close SS Telescopic channels 20" (Depth), Soft close SS Quadrail Channels of 20" Depth, SS Soft Close Auto Hinges (0 degree), SS Screws of required sizes, SS Handles of 200mm size in each shutters of cabinet unit, Magnetic Catcher, Adhesives etc wherever required all complete as per enclosed drawing & the directions of EIC. (Only Front Face of cabinet unit shall be measured for payment Purpose). (All hinges, channels i/c wire baskets above used shall be of Hettich brand or equivalent).

Providing & fixing bottom cabinets of different carcass sizes made of 18mm thick HDF MDHMR pre-laminated board (ISO:14001:2015) in partitions, Front Face panels & back boards ,each cabinet units consisting of required number of SS 304 Grade modular kitchen wire baskets as required a) Cabinet No. 23 as mention in drawing (Section B-B") unit of required size with openable shutters for Stainless Steel Modular Kitchen Corner Storage Carousel basket 2 Shelf Rack made Of Stainless Steel AiSi 304 (26Inches Size). b) Cabinet No. 22 as mention in drawing (Section B-B") unit comprising of Single drawer for Bottle pullout baskets of 02shelves of 430mm ht all complete of required carcass widths & Depths including fixing with SS 304 Grade wire baskets. c) Cabinet No. 14 as mention in drawing (Section A-A") unit comprising of internal shelves & provided with openable type Single Shutter made of 18mm thick HDF Boards. d) Cabinet No. 15 as mention in drawing (Section A-A") unit below the kitchen sink for door mounted SS 304 Grade Dust bin holder of Nickel Chrome Plated, Dia -10" & 6" Ht of Plantex and Heavy Type Stainless Steel Detergent Holder basket of Size 10"(L) x 11"(H)x 8"(W) with 02nos of Shelves all chrome finished inside the Cabinet unit & provided with 18mm thick HDF Boards in the openable type shutters for the cabinet unit.

Including with a set of necessary Soft close SS Quadrail Channels of 20" Depth, SS Soft Close Auto Hinges (0 degree), SS Screws of required sizes, SS Handles of 200mm size in each shutters of cabinet unit, Magnetic Catcher, Adhesives etc wherever required all complete as per enclosed drawing & the directions of EIC. (Only Front Face of cabinet unit shall be measured for payment Purpose). (All materials i/c wire baskets above used shall be of Hettich brand or equivalent).

Providing & fixing bottom cabinets of different carcass sizes made of 18mm thick HDF MDHMR pre-laminated board (ISO:14001:2015) in partitions, Front Face panels & back boards ,each cabinet units consisting of required number of SS 304 Grade modular kitchen wire baskets as required a) Cabinet no. 24 to 29 as mention in drawing (Section B-B") unit both comprising of Top drawer for Plane/Multipurpose baskets required width, 20" Depth, 4" Height , Middle drawer for Plane/Multipurpose baskets required width, 20" Depth, 6" Height ,Bottom most drawer for Plane/Multipurpose baskets required width, 20" Depth, 8" Height all complete of required carcass sizes, including fixing with SS 304 Grade wire baskets. Including with a set of necessary soft close SS Telescopic channels 20" (Depth), Soft close SS Quadrail Channels of 20" Depth, Adhesives,SS Handles of 200mm size in each drawers of cabinet unit, etc wherever required all complete as per enclosed drawing & the directions of EIC. (Only Front Face of cabinet unit shall be measured for payment Purpose.) (All hinges, channels i/c wire baskets above used shall be of Hettich brand or equivalent).

Providing & Fixing wall mounted top cabinet with 40cm projection & other required dimensions of width & height (as per the drawing enclosed) above the Kitchen working slab with required racks shutters, partition, rear side board all made of 18mm thick HDF MDHMR pre-laminated board (ISO:14001:2015) i/c necessary screws,Stainless Steel Soft close Hinges (Size - 0 -Degree), SS Handles of size 200mm, Nails, Adhesives, etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed.) (Hinges above used shall be of Hettich brand or equivalent).

Providing & Fixing wall mounted top cabinet with 30cm projection & other required dimensions of width & height (as per the drawing enclosed) above the Kitchen working slab with required racks, Sides, rear side board including fixing with Top Hung Fully Glazed shutters in the cabinet , all made of 18mm thick Pre-Laminated HDF Boards (of Green Ply or equivalent) using 4mm thick glass panes in the glazed shutter, 12mm thick HDF Boards in the rear sides, i/c Stainless Steel screws,Stainless Steel Hydraulic Soccer of 12Kg Capacity,Stainless Steel Soft close Hinges (Size - 0 -Degree), SS Handles of size 200mm, Nails, Adhesives, etc. all complete as per the direction of EIC. (Measurement to be paid for front face in sqm as per the drawing enclosed). (Hinges, Channels, soccers above used shall be of Hettich brand or equivalent).

Providing & fixing top cabinet for GTPT (Glass Tray Plate Tray) of required size above the kitchen working slab,with openable shutters, Sides, top, bottom of the cabinet unit all made of 18mm thick HDF MDHMR pre-laminated board (ISO:14001:2015) , 12mm thick Pre-Laminated HDF Boards in rear sides backing, Fixing of SS 304 Grade Glass & plate with drip tray set of 03Pieces inside the cabinet unit (as per the enclosed drawing) including necessary soft close auto hinges (0 Degree), SS Cleats, Adhesives,SS Handles of 200mm size in the shutters of cabinet unit, etc wherever required all complete as per enclosed drawing & the directions of EIC. (Only Front Face of cabinet unit shall be measured for payment Purpose.) (Above used hinges, baskets shall be of Hettich brand or equivalent)

Providing and fixing wall mounted Swan Neck Sink Cock chrome finished with Extended Swivel Spout & Lever Type handle Complete of Minimum weight not less than+C30 800gms including a hole making for wall mount installation for the modular Kitchen Sink all complete as per the direction of EIC. (Hindware Brand Code F2 80026CP)

Provoding and fixing storage cup-board made of 18mm thick HDF MDHMR pre-laminated board (ISO:14001:2015) with 60 cm projection including fixing of shutters witg all fittings like brass, butt hinges, brss tower bolt, brass handle, magnet catcher with locking arrangement etc. (only front face of cabinet unit shall be measured for payment purpose)

Providing and Fixing Three burner glass top Gas Hobs of approved design and good quality, i/c fixing it in the existing Kitchen platform slab by cutting a opening of required size & shape of Gas Hobs and making good the sides of opening i/c fixing of 18mm thick HDF Boards in the bottom support of the Gas Hob, all complete as per the directions of EIC. (Gas Hobs of make RUSSETA 3B or equivalent).

A J ENTERPRISES