RUSAChidambaramEle_2025

Wiring with 2 x1.5 sq.mm PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sqmm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End ) etc., complete complying with standard specification and as directed by the departmental officer.

Wiring with 2 x1.5 sq.mm PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sqmm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End etc., complete complying with standard specification and as directed by the departmental officer.

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitble colour for concealed PVC pipe stair case light point. Higher End.( etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 4 feet LED 20 W fitting with LED 20 W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of WT bulk head fitting with guard (Higher end) suitable for 15 W LED Bulb. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 18 W LED Round type Recessed fitting with LED (Higher end) on false ceiling from ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with VC unsheathed FRLS copper leads with MS clamps and with painting. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete (Higher End) with 2 module 100W fan step regulator (Higher end) with 600 mm down rod with fan clamp and hook . etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of louvers shuters arrangements for 300mm (12") sweep (light duty) AC exhasut fan. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 450 mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of louvers shuters arrangements for 450 mm (18") sweep (light duty) AC exhasut fan. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 1 no.6A two module 3 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 3 nos.6A two module 3 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 3 nos .6/16A two module 3 pin socket , 3 nos 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 4 nos .6/16A two module 3 pin socket , 4 nos 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 3 nos 6 A two module socket, 1 no 6/16A two module socket, 3 nos 6 A one module switch, 1 no 16 A one module switch with module cover plate(plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 16A 200/250V 2P+E surface mounting sockets (industrial type) in flush with wall wall with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officer. (For EV charging)

Supply and fixing of 63A FP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 40 A FP MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection. (Higher end) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 40 A Double pole MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection.[The MCB and metal enclosure should be of Legrand (MDS) / Hager (L&T) make]. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 32A Double pole MCB in sheet steel enclosure in flush with wall and making good of the concealed portion with earth connection.[The MCB and metal enclosure should be of Legrand (MDS) / Hager (L&T) make]. etc., complete complying with standard specification and as directed by the departmental officer.

supply and fixing of 32 Amps Four Pole MCB in sheet steel enclosure in flush with wall with earth connection. The MCB & Enclosure should be of Legrand/Hager make. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 2 of 2.5 sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sqmm copper wire and making good of the concealed portion with suitable colour. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 2 of 4 sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sqmm copper wire and making good of the concealed portion with suitable colour. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 2 of 6 sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sqmm copper wire and making good of the concealed portion with suitable colour. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 4 of 6 sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 6 sqmm copper wire and making good of the concealed portion with suitable colour etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 4 of 10 sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sqmm copper wire and making good of the concealed portion with suitable colour. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 4 of 16 sqmm PVC insulated SC unsheathed FRLS copper conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 16 sqmm PVC insulated sc unsheathed copper wire and making good of the concealed portion with suitable colour. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 4 of 25 sqmm (168/0.45) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed on wall and ceiling with continuous earth wire connection of 25 Sq.mm pvc copper wire with painting of suitable colour. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 6 way Vertical Triple Pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door(metal door) with 1 no 160 A 4P MCCB as incoming and 4 nos 63 3P MCB, 6 Nos 6A to 32 A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only, Higher End. etc., complete complying with standard specification and as directed by the departmental officer. (LDB-Main(GF&FF)).

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / Three phase MCB outgoings and seperate 4 way provision for accomodating one no 4 pole incoming ELCB / RCD(totally 8 ways in one segment) and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB (totally 12 nos) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq mm with the following in flush with wall with earth connection only.i) 63A 4P MCB - 1 no. ii) 63A 4P 30MA RCCB/ELCB - 1 no. iii) 40A DP MCB -3 nos. iv) 6A to 32A SP MCB - 12 nos. etc., complete complying with standard specification and as directed by the departmental officer. (Lighting DB's distribution-3Nos.)(GF and FF)

Supply and fixing of 63 A TPN MC switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing etc., complete complying with standard specification and as directed by the departmental officer. (Lift & Pump )

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no.40A DP MCB switch as incoming and 10 Nos 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End. (CDB) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no.32A DP MCB as incoming and 6 Nos 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End. etc., complete complying with standard specification and as directed by the departmental officer. (CDB for Machines)

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no.125 A 4P MCCB as incoming and 24 nos 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End etc., complete complying with standard specification and as directed by the departmental officer. (Power SUB DB)(For Plug Boards GF & FF)

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no.125A 4P MCCB as incoming and 3 nos 63 A 3P MCB, 2 Nos 32 A TP MCB , 18 Nos 6 A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End etc., complete complying with standard specification and as directed by the departmental officer.(Supply for Machines Incoming - AC)(GF & FF)

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no.250 A 4P MCCB as incoming and 7 nos 63 A 3P MCB, 3 Nos 6 A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End etc., complete complying with standard specification and as directed by the departmental officer.(Power Main DB - AC)(GF & FF)

Supply, Fabrication ,errection and Commissioning of 630A dust and vermin proof floor mounting cubical type metering pannel board of size not less than (size 4.6Ft x 5.3Ft x 1.5 Ft) made up of 16SWG CRCA sheet steel for outer body on suitable frame work 11/4" x 1/4" copper bus for three phases and neutral on synthetic moulded compound bus support with hylem sheet separation with necessary space for main switches and supply and fixing of 1. Incomer : 630A TPN Switch - 1 No Outgoing: 2. 400A TPN Switch - 2 Nos 3.250A TPN Switch -3 Nos 4. 125A TPN Switch -2Nos The incoming 630A switch should be connected to the busbar 11/4" x 1/4" tinned cu. flat . 2 Nos 400 A switches should be connected to the busbar 1" x 1/2" , 3 Nos 250A ,2 Nos 125 A switches should be connected to the bus by 1 "x 1/8 " cu. Flat with 2coats of high quality enamal paint over one coat of red oxide primer with following arrangements . The switches should be separated 6 mm thick hylem sheet and all swtches should be properly earthed and as per CEIG specification. a) 3 phase indicator lamp arrangements with fuse unit and control switches b) Floor mounting arrangements with MS chanel frame work with necessary foundation bolt arrangements c) Danger board as per IE rules regulation. (DATA -L) (Power Panel).

Supply, Fabrication ,errection and Commissioning of 400A dust and vermin proof floor mounting cubical type metering pannel board of size not less than (size 4.6Ft x 5.3Ft x 1.5 Ft) made up of 16SWG CRCA sheet steel for outer body on suitable frame work 1" x 1/2" copper bus for three phases and neutral on synthetic moulded compound bus support with hylem sheet separation with necessary space for main switches and supply and fixing of 1. Incomer : 400A TPN Switch - 1 No Outgoing: 2. 250A TPN Switch - 4 Nos 3. 125A TPN Switch -3 Noswith double earth connection by 1" x 1/8" cu.flats with 2 coats of high quality enamal paint over one coat of red oxide primer with following arrangements a) 3 phase indicator lamp arrangements with fuse unit and control switches b) Floor mounting arrangements with MS chanel frame work with necessary foundation bolt arrangements

Supply and laying of 3 1/2 x 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 Mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. etc., complete complying with standard specification and as directed by the departmental officer. (Lift & Pump Room)

Supply and clamping of 31/2 x 25 sq.mm PVC armoured LTUG cable on post or on wall with MS Clamps. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of brass cable gland for 31/2 x 25 sq.rnrn LTUG armoured cable with earth connection. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of brass cable end termination for 31/2 x 25 sq.rnrn LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. etc., complete complying with standard specification and as directed by the departmental officer.

Supply, erection, testing and commissioning of 400 kVA, 11kV/433 V, ONAN off - load tap changing copper wound outdoor type distribution transformer confirming to relevant ISI 1180- Level 1 and fitted with the following: (a) HV Bushing terminal arrangements (b) LT cable end box suitable for 3 runs of 31/2 x 300 sq.mm LTUG cable (c) Conservator with shut off valve. (d) Dehydrating Silica gel Breather (e) Conservator drain plug valve (f) Tank drain plug valve (g) 4 Nos. plain rollers (h) Thermometer pocket with thermometer with capillary tubing for maximum reading position (i) Drain plug valve (j) Filter valve (k) Oil filling whole with cap (l) Oil level gauge (m) Two body earthing terminal (n) Rating and terminal marking diagram plate

o) Lifting hooks/Lifting eyes/Jacking pad to facilitate movement to transformer and easy ground level (p) Off load hand operated tap changing switch at stand by height from ground level (q) Tapping on primary winding for voltage variation +5% to -5% (r) Neutral on L.V side to be available for 4 wire supply and brought out for earthing (s) Air release device (t) The transfsormer should be supplied with first filling of oil (u) All removable covers shall be provided with weather proof hot oil resistance gaskets to prevent leakage of water into core and oil from the tank with low on load loss 600W and load loss 3600W impedence 4.5%(Make :CREL/ROWSONS/Kirloskar Electric company) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and Erection of additional materials for two pole structure as follows (a) One set of gang operated disconnecting switch 11 kV horizontally / vertically operating type on suitable channel 100 x 50 x 6 mm and AB switch complete with guide operating handle on suitable double channel of size 4" x 2" x ¼" complete with angle iron cross arm. (b) One set of 3 Nos. 11 kV lightning arrestors mounted on suitable channel iron of size 4" x 2" x ¼" complete. (c) One set of 3 Nos. 11 kV Drop out fuses with operating rod on suitable double channel and angle iron of size 2" x ¼" complete. (d) One set of 3 Nos. 11 kV pin insulators fixed on suitable channel iron frame work complete for supporting the copper jumpers. (e) Providing necessary HT connections and jumper connection from TNEB structure to consumer's pole structure with ACSR conductor / 'O' copper tubular bus to AB switch, AB switch to lightning arrestor and to D.O fuse through pin insulator and D.O fuse complete with colour coding. (f) Supply and fixing of 11 kV metal danger boards - 2Nos. (g) Painting complete with primary coat of red oxide and then by two coats of approved aluminium paint. etc., complete complying with standard specification and as directed by the departmental officer.

Desgin, Fabrication testing and commissioning of 800 Amps cubical panel floor mounting type dust and vermin proof MV panel board of size 8' x 6' x3' made up of 18 SWG CRCA sheet steel rated for 433 V., 50 HZ AC supply as per the CEIG guidelines and latest IE rules comprising the following: Main Busbar:- copper busbar rated for 800Amps of 75mm x 12mm for phases and one number for neutral. Incomer-1- 1No of 800A 4 pole 433 V, MV air circuit breaker ( L &T &C&S make ) manual draw out type for EB supply Incomer-2- 1 No of 800A 4 pole 433 V, MV air circuit breaker ( L&T/eq make ) manual draw out type for Generator supply 1. Manual trip push button - 2 Nos 2. Mechanical ON/OFF indicator - 2 Nos 3. UV coil device suitable for 433 volts Ac- 2 Nos 4. No/ NC auxiliary contacts- 2 sets 5. CTs suitable for metering - 2 sets 6. LED indicating lamp- 2 sets 7. Digital multy function meter- 2 nos 8. Earth fault relay- 2 NOs 9. Over current relay- 2 Nos separate mould base for each pole for easy maintenance, all relevant protection, accessories, as per CEIG IE rules in force, with interconnection and terminations and required

Design, supply, erection testing commissioning and handing over of 100 kVAR capacity automatic power factor control panel with 100 kVAR capacitors with the following specifications. L&T eta sys-MU contactor switched standard AFC panel / equivalent capacitors - LT XL ultra heavy duty capacitors Incomer - 630A MCCB. Branch protection - MCCB Switching - Auto + manual Power factor controller for 100 kVAR capacitor bank indigenously designed, micro controller based programmable controller, works designed, micro controller based programmable controller, works three phase and switching on the suitable capacitor banks and maintaining the PF to the Optimum. The controller is to have a scrolling, LCD display which shows instantaneous voltage and current of all the three phases kW, kVA, RkVA and PF indication for the number of banks ON/OFF load imbalance and protection for low / High voltage, single phasing and phase sequence. 2) Supply and fixing of suitable power supply unit for the power factor controller 3) Supply and fixing of current voltage Transducers of ratio 400 : 1 to measure current and voltage in all the three phases 4) Supply and fixing of suitable current limiters to cater the inrush current.

5) Supply and fixing of 630A MCCB as incoming to the panel 6) Supply and fixing of suitable MCCBs for switching ON and OFF of I to VIII stage wise capacitor of capacitor7) Supply and fixing of contactors of suitable rating for switching ON & OFF of the capacitors in various stage of L&T make / equivalent 8) Supply and fixing of 250 kVAR capacitor 440V, 50Hz Delta connected L&T LT/ L ultra heavy duty capacitors make / equivalent in 12 stages in steps.Stage wise details: i) Stage : 25 KVAR ii) Stage : 25 kVAR iii) Stage : 10 kVAR iv) Stage : 10 kVAR v) Stage : 10 kVAR vi) Stage : 10 kVAR vii) Stage : 5 kVAR viii) Stage : 5 kVAR 9) Supply and fixing of a power coated cabinet of 10) SWG / CRCA sheet steel to enclose all the above items. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and clamping of 3½ x 185 sq.mm PVC armoured LTUG cable on post or on wall with MS Clamps. etc., complete complying with standard specification and as directed by the departmental officer.(Capacitor Bank)

Supply and fixing of brass cable gland for 3½ x 185 sqmm PVC armoured LTUG cable with earth connection. ( etc., complete complying with standard specification and as directed by the departmental officer.

Supply and providing cable end termination of 3½ x 185 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officer.

Supply and laying of 11kV 3 Core 240 Sqmm XLPE UG cable in a trench to be excavated at a depth of 1.0 mtr. Putting 0.15 mtr. Layers of sand covering the HTUG cable completely with cement concrete RCC cable truff and refilling the earth to make good . etc., complete complying with standard specification and as directed by the departmental officer.

Supply and clamping at 11kV 3 core 240 sq.mm XLPE UG cable on wall with M.S. special clamps .(From VCB to transformer). etc., complete complying with standard specification and as directed by the departmental officer.

Supply and providing cable end termination suitable for 11kV 3 core 240 sq.mm XLPE(UE) HTUG cable. ( etc., complete complying with standard specification and as directed by the departmental officer.

Supply and clamping of 3½ x 300 sq.mm PVC armoured LTUG cable on post or on wall with MS Clamps. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of brass cable gland for 3½ x 300 sqmm PVC armoured LTUG cable with earth connection. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and providing cable end termination of 3½ x 300 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officer.

Supply and clamping of 2 runs of 3½ x 240 sq.mm PVC armoured LTUG cable on post or on wall with MS Clamps.( etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of brass cable gland for 3½ x 240 sqmm PVC armoured LTUG cable with earth connection. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and providing cable end termination of 3½ x 240 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officer.

Supply and laying of 3 runs of 31/2 x 300 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 Mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officer.(Transformer Out- MV Panel)

Supply and clamping of 3 runs of 3½ x 300 sq.mm PVC armoured LTUG cable on post or on wall with MS Clamps etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of brass cable gland for 3½ x 300 sqmm PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officer.

Supply and providing cable end termination of 3½ x 300 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete etc., complete complying with standard specification and as directed by the departmental officer.

Preparation of site plan, physical layout, electrical line schematic diagram 10 sets, getting drawing approval from CEIG, preparation of completion report, rectification report, etc., and arranging CEIG inspection and obtaining safety certificate from CEIG, payment of CEIG inspection fees and preparation of one set approved drawing and copy of safety certificate in a neat frame work and like fixed as HT substation & Drawing approval Transformer Erection and Powermains Arrangement. etc., complete complying with standard specification and as directed by the departmental officer.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and Run of 1 of No.8 SWG copper wire for earth connection. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection. etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection. etc., complete complying with standard specification and as directed by the departmental officer.

Please Enable Macros to View BoQ information