Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST L1 | |
| 2 | L2₹42.3 L+₹7.9 L (23.0%)Rejected-Finance BANPURA BATWARA SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | Rejected-Technical | - | Rejected-Technical NO DD FOR RS 500/- UPLOADED AND SUBMITTED IN THE NAME OF M/S IEE BEE CONSTRUCTIONS IN LIEU OF M/S BASHIR AND SONS |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
23 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O 56 APO PIN 913970
CERTAIN SANCTIONED WORKS OF BR AND EM AT VARIOUS LOCATIONS UNDER GE 970 EWS
2022_MES_571044_1
GE 970 EWS-66/2022-23
Open Tender
Civil Works - Others
Item Rate
270 days
GE 970 EWS C/O 56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹88,000
Yes
9 Mar 2023
24 Dec 2022
25 Jan 2023
24 Dec 2022
23 Jan 2023
9 Jan 2023
Amount
Excavation in Post holes (or for similar work) each n exc 0.50 cum, getting out, returing filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified & directed.
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out as in soft/loose soil complete all as specified and directed.
Excavation in trenches n.exc 1.50m wide and n exc 1.5m depth for foundation etc or for shafts, wells, etc and getting out in soft/loose soil complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 (40mm graded aggregate) in foundation, filling, pole filling and mass concrete complete all as specified and directed.
M&L formwork for sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
M&L formwork for sides of columns etc and similar work; vertical or to batter complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc complete all as specified and directed
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar works not exc 200mm thick complete all as specified and directed
M&L for formwork to edges of concrete flat exc 10cm but n.exc 20cm wide complete all as specified and directed
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
-ditto- as above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders.
M&L for RCC (design mix) M-30 (20mm graded aggregate) in foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc.; basement slabs, underreamed piles and mass concrete complete all as specified and directed
M&L for RCC (design mix) M-30 (20mm graded aggregate) in Columns complete all as specified and directed
M&L for RCC (design mix) M-30 (20mm graded aggregate) in beams, cantilevers, bressummers, linlets over 1.5m span complete all as specified and directed
M&L for RCC (design mix) M-30 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in selves and like completebeams, cantilevers, bressummers, linlets over 1.5m span complete
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radious built in CM 1:4 complete all as specified and directed
Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half thick brick wall built in cement mortar (1:4) complete all as specified and directed.
Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in one brick thick honey comb walling built in cement mortar (1:4) complete all as specified and directed.
Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified & directed
Loose filling of broken stone or boulders with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified & directed
Returning filling incl spreading leveling watering and well rammings in layers n exc 25cm complete all as specified and directed
Removal of surplus soil n exc 50m and depositing where dirtected at a level n exc 1.5m above the starting point complete all as specified and directed
S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F for structural steel work for roof truses, purlins, crane, gantries, rails incl distance pieces, cleats Fe 410-W(Gde E-250) quality A only etc complete all as specified and directed
M&L for mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30 cm long complete all as specified and directed
S&F for prepainted galvaiume aluminum zinc coating GI base corrugated sheet sheet 0.50mm thick of an colour having tensile strenght of 550MPA as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed
S&F for prepainted galvaiume aluminum zinc coating GI base plain steel sheet 0.50mm thick of an colour having tensile strenght of 550MPA as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed
Plates (plain or chequered) channels. square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to grade Fe-410-W Gde-E-250 quality B complete all as specified and directed.
S&F Mild steel, plain, black sheet as required for plain black MS sheet 1.25mm thick as in eaves boards complete in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed
Supply and fixing for framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed.
S&F for anodised aluminiun snap grid frame work for false ceiling complete all as specified and directed
S&F Providing and fixing Gypsum Board 10mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed
M&L for Rendering 15mm thick on fair faces of brick work or concerete surfacec in CM 1:6, finish even and smooth without using extra cement complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of brick work or concerete surfacec in CM 1:4, finish even and smooth without using extra cement complete all as specified and directed.
M&L for Rendering 15mm thick on fair faces of brick work or concerete surfacec in CM 1:4, with mixing of WPC finish even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall measured and paid for separately.
M&L for Rendering 5mm thick on fair faces on ceiling or concerete surfacec in CM 1:3, finish even and smooth without using extra cement complete all as specified and directed.
M&L for Coloured Glazed ceramic tiles (300x200 mm x 7 mm thick, as in vertical surfaces such as skirting, dados and risers to steps etc.over and incl 10 mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L for moorum filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed incl watering complete all as specified and directed
M&L for 75mm PCC 1:4:8 type D2 (40mm graded aggregate) as in sub base complete all as specified and directed
M&L for 25mm PCC 1:2:4 type B0 (12.5mm graded aggregate) as in floor complete all as specified and directed
Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed
Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed
Factory made solid PVC door frame of size 50x47 mm made out of 5mm plain colour PVC sheet reinforced with MS suqare tube complete all as specified and directed
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed
Material & labour 300 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.
S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed
S&F for 100mm size but hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed
S&F for Aluminium anodised cast type handles size 125mm complete all as specified and directed
Material & labour mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed.
M&L for preparation on new plastered surfaces of wall and applying two coat of oil bound distemper over 3mm thick wall care putty complete all as specified and directed
Preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.
Preparation of newly plastered surfaces of ceiling surfaces and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coat of cement base paint over a coat of alkali resistant primer complete all as specified and directed
M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for 75mm thick PCC 1:3:6, type C2 (40mm graded aggregate) as in plinth protection finished even and smooth complete all as specified and directed
S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors bors of tube 15mm all as specified and directed
S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors bors of tube 20 mm all as specified and directed
S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed
1000 litre capacity, double layered, HDPE, rotational moulded polythylene water storage tank, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including Ball valve high pressure 20 mm bore of PTMT with epoxy coated aluminium rod high denisty plastic ball screwed for iron pipe and fixed complete all as specified and directed.
S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed
S&F 10 Ltr PVC valveless, syphonic action type low level flush cistern ( ISI marked) with inlet, ball valve, float and handle including brackets complete all as specified and as directed.
S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580x440 mm white, with integral foot rests and including provision of lime concrete bedding including jointer to socket of flushing and connecting pipe to union inlet and over flow pipe connecting only complete all as specified and as directed.
S&F for Wash Basins, Vitreous China (flat back or angle back type) of size 550x400 mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.
Soap dish (oval) type, mild steel chromium plated of approximate size 100 x50x10mm, complete all as specified and as directed.
S&F brass cromium plated tubular towel rail, 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.
S&F for PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.
S&F Bib taps, Fancy type Chromium plated cast copper alloy with crutch or butterfly handle, screwed for iron pipe of 20 mm bore or for brass ferrule and fixed complete all as specified and as directed.
S&F 15 mm bore Stop valves, cast copper alloy, Fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F brass CP shower rose 80mm size complete all as specified and as directed.
Mild steel Chromium plated grating 100 mm dia, complete all as specified and directed.
S&F Gun-metal, globe or gate valves, 20 mm dia bore of pipe with iron wheel head, screwed both ends for iron pipe and fixed.
S&F Gun-metal, globe or gate valves, 25 mm dia bore of pipe with iron wheel head, screwed both ends for iron pipe and fixed.
Lagging on pipes of intermal dia 20 mm, used in external water supply or plumbing all round with, 40mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144 Kg/cum conforming to IS 9842, provided with chicken mesh wire netting 25 gauze 20mm mesh and finaly covering with plaster of pairs complete, all as specified and directed.
Supply only integral water proofing compound complete all as specified & directed.
M&L non skid ceramic coloured/white (plain or printed) tiles 7mm thick area of each tile exc. 0.11 sqm but not exc.0.18sqm in floors etc set and jointed in neat cement slurry and painted in white or coloured cement to match over 15 mm thick cement screed in CM 1:6 complete all as specified and directed
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm (minimum), white with grating and union for discharge pipe (excluding flushing cistern, flush pipe) and including waste pipe, complete all as specified and directed.
S&F Vitreous China urinal partition white of size 310x770mm complete all as specified and directed.
Pillar tap cast copper alloy with capistan heads chromimium plated fancy type screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.
S&F 150mm bore Reinforced concrete pipe, class NP-2, laid and jointed complete with collars complete all as specified and directed
M&L for RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole cover slab and similar article with plain faces, set in cement mortar 1:4 complete all as specified and directed.
Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for 2nd class hardwood clean swan Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed
S&F 35 mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed
Factory made 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed
Supply & fix pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of zinc chromate / red oxide primer including providing PCC 1:3:6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and directed.
3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed
Galvanized mild steel wire cloth, 0.63 mm nominal dia or wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanized wire staple complete all as specified and directed
M&L for Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
3-layer PP-R Polypropylene random copolymer pipes of 16mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.
3-layer PP-R Polypropylene random copolymer pipes of 20mm dia, SDR 7.4 (PN-16) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified and directed.
110mm PVC (SWR) pipe single socketed, in any length with rubber ring joints. laid in trenches or in floors complete all as specified and directed.
75mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.
PVC (SWR) bend any radius 75mm complete all as specified and directed.
PVC (SWR) bend any radius 110mm complete all as specified and directed.
PVC (SWR) Floor trap 75mm, plain with grating incl jointing with solvent cement complete all as specified and directed.
PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.
Material & labour for cast iron soil, waste and vent pipe of bore 100mm, sand cast type in any length with or without ears with cement joints fixed to wall/laid in trenches complete all as specified and directed.
M&L for concrete bed to drain pipes of bore 100 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate including necessary shuttering and supports complete all as specified and directed Note:-(i) Thickness of bed below of pipe-10cm. (ii) Width of bed-outer dia of pipe plus 30cm
M&L for concrete bed to drain pipes of bore 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate including necessary shuttering and supports complete all as specified and directed Note:-(i) Thickness of bed below of pipe-10cm. (ii) Width of bed-outer dia of pipe plus 30cm
Material & labour for cast iron soil, waste and vent pipe of bore 75mm, sand cast type in any length with or without ears with cement joints fixed to wall/laid in trenches complete all as specified and directed.
Material & labour for cast iron floor trap outlet diameter 75mm, plain with grating including jointing with solvent & cement concrete 1:2:4 complete all as specified and directed.
Supply and fix 75mm cast iron vent cowl complete all as specified and directed.
Supply and fix 75mm cast iron bend complete all as specified and directed.
Supply and fix 100mm cast iron bend complete all as specified and directed.
Sand filling under floor or in foundations including watering and cosolidation complete all as specified and directed
M&L for 60 mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of any shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and directed. The Interlocking Paver blocks shall be procured directly from one of the Manufacturers specified. Note:-The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.
Providing precast cement concrete blocks exc 10cm in width built in cement concrete 1:2:4 type B-1 setting in cement mortar 1:4, complete all as specified and directed.
Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 16 Sqmm 4 Core laid in trenches/pipes or fixed to poles/walls with suitable saddle & glands complete all as specified and directed Note : Excavation & Earthwork shall be measured and paid separately.
M&L for Earthing complete with GI earth plate 60cmx60cm and 6mm thick electrode and 4mm dia GI wire as earthing lead burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire earth lead 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and including earth work, PCC pit and RCC cover, watering pipe 20 mm dia light grade,funnel, wire mesh, protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire, charcoal dust and salt etc. and connected to earthing test point complete all as specified and directed.
Point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS-H) drawn through and including PVC casing and caping (ISI marked) and accessories (fixed on wall/ceiling surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLS-H), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed.
All as per description of srl item No 111 here in before for 3/5 pin socket out let 5 Amps on same board.
All as per description of srl item No 111 here in before for 3/5 pin socket out let 5 Amps on independent board.
All as per description of srl item No 111 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 2.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin socket out let 15 Amps on independent board.
Sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 4 way SPN 240 volts complete all as specified and directed.
Sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 8 way SPN 240 volts complete all as specified and directed.
MCB SPN 32 Amp, 240 volts,10 KA, complete all as specified and directed.
MCB SP 6 to 32 Amp, 240 volts,10 KA, complete all as specified and directed.
Switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed .
Switch socket combination 5 in 1, 5 pin, 15 Amps 240 V AC flush type universal complete all as specified and directed.
Ceiling rose 3 terminals complete all as specified and directed
Socket outlet 2 in 1, 3 pin, 5A, 230V flush type complete all as specified and directed.
1X20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.95 complete all as specified and directed. make : Bajaj Cat part No : BCLSB 18 WH or equivalent in : /Philips/Wipro.
Supply and Fixing of exhaust fan 300mm sweep, heavy duty with speed of 900 rpm, metal body, single phase with blades complete all as specified and directed.
Supply and Fixing of exhaust fan 380mm sweep, heavy duty with speed of 900 rpm, metal body, single phase with blades complete all as specified and directed.
Supply and fix water heater storage type with stainless steel inner tank, electrically operated, single phase, of capacity 25 litres with 5 star BEE rating, vertical mounted with stranded fittings such as thermostat, heating element, LED indicator, safety valve, non-return valve, fixing clamps, nut bolts washers, inlet/outlet PVC steel reinforcement hot/cold pipe complete all as specified and directed by Engr-in-Charge.
Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket with and including a 20amp MCB 240V complete all as specified.
Supply, installation and testing and commissioning of online UPS for back up supply to signal equipment/server for minimum 180 minutes or more as per OEM recommendation of capacity 10 KVA/8 kw with following specifications and parts :-
(a) Capacity - 10 KVA
(b) Input wiring - 1 phase three wire (1 phase+N+PE)
(c) Rated voltage - 208 Vac/220 Vac/230Vac
(d) Voltage range 165 to285 Vac
(e) Rated frequency - 50/60 Hz (auto sensing)
(f) Power factor - > 0.99
(g) Total Harmonic Distortion (THD) - < 5%
(h) By pass voltage range - Minus 40% to plus 15% (settable)
(j) Output wiring - Single phase three wire (1 phase+N+PE)
(k) Rated voltage - 208 Vac/220 Vac/230Vac
(l) Voltage regulation - + 1%
(m) Frequency - 50/60 Hz
(n) Waveform - Sine wave
(o) Power factor - 0.8
(p) THD - <1% (linear load), ,<3% (non linear load)
(q) DC voltage - 192 Vdc
(r) Number of batteries - 16 Nos
(s) Inbuilt batteries - as per OEM if applicable
(t) Charging current - 2/4/8A as per OEM standard
(u) Recharge time - upto 8 hours
(v) Efficiency - > 87% / 91%
(w) Transfer time - 0 ms
(x) Protections - Short circuit, output overload, over temperature, battery low voltage, over/under voltage and fan failure
(y) Display - LCD + LED
(z) Communications - RS232,USB/RS485/dry contacts/SNMP
(aa) Noise level - < 58db
(ab) Altitude - 5200 feet (approx) at Manasbal (suitable derating factor shall be applied)
Make : Microtek/Luminous/APC/Servotek
(ac) Supply and install battery maintenance free battery (SMF) 12V, 100 AH (16 Nos) for battery bank for UPS including iron rack for battery and initial charging complete all as specified and directed and including battery lead (not less than 1.00 m long each) made out of PVC Insulated Plain/Striped Automobile Cables with high conductivity bright annealed copper conductor bunched together, insulated with dielectric grade PVC compound (impervious to oils, greases, acids, petrol and water) conforming to IS 2465 of suitable size soldered both end or one end with copper/brass connector with nuts and bolts for battery pole and the other with copper lug for self starter terminal as required or as directed. (Battery make : Amron/Exide/TATA) Note : 1. The quoted rate shall include cost of installation by representative of OEM, delivery to site and necessary spares/items required at site. 2. Two years warranty shall included in rate quopted by the contractor.
M/S SUHEEL CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .