Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.6 LAccepted-AOC 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L1 | Accepted-AOC Being lowest bid | |
| 2 | L2₹40.7 L+₹14,911 (0.37%)Rejected-Finance NEW JAIL ROAD UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹44.4 L+₹3.8 L (9.42%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest |
Tender Value
₹42.7 L
EMD Value
₹85,420
Closing Date
5 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Udhampur
GE North Udhampur PIN 182101 C/O 56 APO
ADDN / ALTN TO BLDG NO. P-55 AT JADUNATH ENCLAVE (JNE) UNDER GE (NORTH) UDHAMPUR.
2024_MES_663287_1
GE/U(N)-49/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE North Udhampur
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE North Udhampur
₹85,420
Yes
22 Nov 2024
2 Jul 2024
7 Sept 2024
2 Jul 2024
5 Sept 2024
19 Jul 2024
2 Jul 2024 - 8 Jul 2024
Amount
Demolition of cement concrete (un reinforced) as in roofs of existing water proofing treatment of any type and any thickness, complete all as specified and as directed.
M&L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc. for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg of cement per Sqm, complete all as specified and directed.
M&L for applying bituminous primer confiriming to IS-3384 @ 0.40 Kg/Sqm on prepared surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS-702@ 1.20 Kg/ Sqm on the surfaces. Provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrance will be 3 Kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150mm & side lap of 75mm bonded with hot blown bitumen. Over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20 Kg/Sqm and blinded with fine sand in dry condition @ 0.50 Kg/Sqm dusted over the bitumen coat with aluminium paint, complete all as specified and directed. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer/ company.
M&L for 15mm thick rendering in CM 1:3 on roof surfaces, finished the surface even and smooth without using extra cement with and including mixing of water proofing compound for accessable roof/ Non accessable roof, complete all as specified and directed.
Demolition of cement concrete (reinforced) of pardis, roofs, floors, beams, staircase, landing, chajjas & wall manually or by mechanical means, of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
M&L for 18 to 20mm thick, granite (of any type) tiles, machine cut, laid in floors or fixed on verticle surfaces, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed.
Rounding or moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving exe 15cm thickness (below or above ground level), complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in leveling course or in floors, complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.
M&L for 15mm thick rendering in two layers (first layer 10mm thick and second layer 5mm thick) on fair faces of brick work or concrete surfaces, with using WPC, finished the surface even and fair without using extra cement, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.
M&L for 10mm thick rendering in cement mortar 1:6 on fair face of brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 5mm thick rendering in CM 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of white wash, complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying 2-3mm thick wall care putty and two coats of oil bound distemper, complete all as specified and directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 Gm/litre and UV resistance as per IS-15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over a coat of wall care putty over new or old surfaces of any type, complete all as specified and directed.
Demolition of brick work or stone boulder masonry, built in cement mortor including all quoins, arches, pillars etc., complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, build in CM 1.6, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.50 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames), area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.
M&L for reinforced cement concrete, 1:1.5:3, type A-1 (using 20mm graded crushed stone aggregates) as in slab supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and the like, complete all as specified and directed.
Formwork to rough finished edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc 10cm wide, complete all as specified and directed.
Formwork to rough finished concrete surfaces and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.
S&F powder coated (of approved colour) aluminium (minimum thickness of powder coated 50 micron) as in shutter of windows, ventilators openable/ louvers fixed/ sliding type without sash bars, aluminium section not less than 0.55 Kg/m including necessery jointing cleats, glazing clips, rubber, neoprene packing, aluminium snap beding, screws, rolling for smooth moving and locking arrangement etc. fixed to wall including preparation of disturbed portion both sides (internal & external surfaces of wall) to match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face), complete all as specified and directed.
S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading, screws etc, complete all as specified and directed.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded, built up standard tubular sections/ appropriate 'Z' sections and other sections of approved make, conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, complete all as specified and directed.
S&F aluminium deco grill of 5 to 6mm dia size of mesh not exe 7.5cm in either direction including anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.
S&F 4.0mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.
S&F 4.0mm thick pin head type, figured glass and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.
Dismantling cast iron or reinforced concrete drain pipes of any size upto 100mm bore, jointed in cement mortor and taking out of trenches, if required, complete all as specified and directed.
S&F 150x150mm size salt glazed stoneware gully traps, square or round mouthed, type ‘P’ and jointed, ISI marked, complete all as specified and directed.
S&F in repair/ replacement 100mm bore sand cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall, complete all as specified and directed.
S&F in replacement 100mm bore cast iron bends/ reducer (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed.
Fixing only in repairs 100mm bore cast iron bends (any radius), measured larger bore, complete all as specified and directed.
S&F in replacement branch pieces, 100mm bore cast iron, single (equal or unequal), ordinary or inverted (spigot or socket type) or with paraller branches, fitted with oval accessed door, complete all as specified and directed.
M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cover slabs (for manholes/ drain etc) and similar articles with plain faces as requied, set in cement mortar 1:6, complete all as specified and directed.
M&L for 150mm bore reinforced cement concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.
Cutting into existing manholes for connecting new drains (internal dia of pipe not exc 150mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) smooth finished and reforming benching, complete all as specified and directed.
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in concrete bed to drain pipes of 150mm bore including packing under and hunching against the sides of pipes after they are laid and tested, complete all as specified and directed.
Dismantling of cast iron or reinforced concrete drains pipes, jointed in cement mortar of dia 150mm and taking out from trenches, complete all as specified and directed.
Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, shaft, laying of cable/pipe etc. and getting out in any type of soil, complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.
Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in plinth protection, finished the surface even and smooth without using extra cement, complete all as specified and directed.
S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
S&F TMT Mild steel bars 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Supply only water proofing compound, complete all as specified and as directed.
S&F aluminium extruded section hydraulically door closer, regulated designation No. 1, universal type, suitable for door shutter upto 700mm in width and of weight not more than 35 Kg, complete all as specified and directed.
S&F 75mm size butt hinges, medium weight, cold rolled, mild steel, complete all as specified and directed.
S&F 300mm long aluminum alloy, anodised, sliding bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed, complete all as specified and directed.
S&F 250mm long aluminum alloy, anodised, sliding bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts, 200mm long of extruded section, complete all as specified and directed.
S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, complete all as specified and directed.
S&F alunminium handle, cast type, 100mm long, oval type, complete all as specified and directed.
S&F alunminium handle, cast type, 150mm long, oval type, complete all as specified and directed.
S&F 150mm size floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.
S&F solid PVC door frame of size 50x47mm, made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specifications & drawing, complete all as specified and directed.
S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame, made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site, complete all as specified and directed.
S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. (thickness of sheet shall be 1.25mm) and make the wall good with plaster in CM 1:6, complete all as specified and directed.
M&L for PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregates) as in filling in back of pressed steel door frame/ chowkhat and fixing of bed block of hold fast etc, complete all as specified and directed.
S&F 35mm thick factory made, 2nd class hard wood flush door shutters, solid core with particle board, exterior grade as per IS-22002 of 1983 (Part-I). Flush door shutters shall be internally lipped as per Clause 8.21 of SSR-2009 Part-I. flush shutter solid panel construction with both commercial type plywood face on both sides, complete all as specified and directed.
Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceabletiles to storeand rubbish off the premises etc. complete all as specified and directed.
M&L for 10mm thick vitrified ceramic tiles of any colour (Square or rectangular), polished, area of each tile not exc 0.36 Sqm, laid in floors over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.
M&L for 10mm thick vitrified ceramic tiles of any colour (Square or rectangular), polished, area of each tile not exc 0.36 Sqm, fixed on wall/ skirting over and including 10mm thick screed bed or bedding layer in CM 1:3, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.
M&L for 7-8mm thick non skid coloured ceramic tiles, area of each tile exc. 0.11 Sqm but not exc 0.18 Sqm, laid in floor over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.
M&L for glazed ceramic coloured digital tiles of size 450x300x7mm thick as approved pattern (Approved by GE) as on walls/ dados/ skirtings or on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.
S&F in replacement 15mm bore stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
S&F in replacement 15mm bore stop valve (concealed type), fancy type, chromium plated with long shank and cup, complete all as specified and directed.
S&F in replacement brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and directed.
S&F stainless steel soap dish of size 160mm x 160mm x 90mm, fixed to plugs on wall with chromium plated brass screws, complete all as specified and directed.
S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule, complete all as specified and directed.
S&F PVC connection of size 15mm with PTMT nuts of length 450mm, complete all as specified and directed.
S&F in replacement centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore GI pipe, complete all as specified and directed.
S&F in replacement PVC low level flushing cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle, complete all as specified and directed.
Dismantling water tank and remove to store of capacity exc 500 ltrs but not exc 1000 ltrs, complete all as specified and directed.
S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), white colour, three layered, ISI Marked, hoisted and fixed in position, complete all as specified and directed.
Taking up or down GI tubing 15mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.
Taking up or down GI tubing 20mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.
S&F 25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods of ay type with accessories, complete all as specified and directed. Note :- The cost of brackets and knobs shall be deemed to include in the quoted rates.
S&F 15mm bore GI tubing, medium grade with all fitting and fixtures, fixed to walls or ceilings or laid in floors, complete all as specified and directed.
S&F 20mm bore GI tubing, medium grade with all fitting and fixtures, fixed to walls or ceilings or laid in floors, complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings etc. with ends of bars, shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, staging for water tanks and similar work, conforming to Fe-290, Gde-E-165, complete all as specified and directed.
Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled/ disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, exc half brick but not exc one brick thick wall, complete all as specified and directed.
M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors or sub base of floor, complete all as specified and directed.
M&L for chequred cement concrete tiles of size 25cm x 25cm x 22mm thick each, set, jointed and pointed in neat cement slurry, laid in floors with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.
Demolation of cement concrete, un-reinforced in sunken portion of WC, removing all loose particles alogwith exiting water proofing treatment, cleaning by wire mess/ brushes to removing all dirt and cleaning the surface with water etc, complete all as specified and directed.
Providing and laying water proofing treatment to sunken portion of WCs, bathrooms etc. by applying first layer of slurry of cement @ 0.488 Kg/ Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm, this layer allowed to air cure for 4 hours then applying slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm and allowed to aircure for 4 hours and joints seal with sealing compound, complete all as specified and directed. Notes :- Before laying of cement concrete joints of trap/ WC/ Soil pipes shall be properly sealed with sealing compound of Roofex/ Forre/ FOSROC and provn of 'P' or 'S' trap & Nahani/ floor traps with long arm.
M&L for 15mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for plain cement concerte 1:5:10 type E-2 (using 40mm graded stone aggregates) as in sunken portion treatment, complete all as specified and directed.
S&F in replacement viterous china wash hand basin, pedestral type, white, flat back, size 550mm x 400mm including waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of iron 65x65x6mm including embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe of suitable dia and length and grating with hole, complete all as specified and directed.
S&F in replacement vitreous china bowl urinal, flat back of size of 465mm x 355mm x 265mm, white with grating & union for discharge pipe (excluding flushing cistern) and including waste fittings, complete all as specified and directed.
S&F in replacement vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern ) white including fixing bolts,including connection P trap etc to drain pipe ( or out going pipe) and to flushing pipe,antisyphonage pipe etc, complete all as specified & directed.
S&F in replacement health faucet, brass, chromium plated with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed. Make :- Jaquar Cat Part No. ALD-573 / Cera Cat Part No. F 8030103 or equivalent make as listed in list of makes.
M&L for galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp insulation etc.) or insulation boards/ slabs/ blankets of any thickness including cover fillets, complete all as specified and directed.
S&F 4mm thick non asbestos fibre cement board as in ceiling, panel size 605mm x 605mm designed, conforming to IS-14862 type B category three including snapgrid frame work, hold fast, suspenders, complete all as specified and directed.
Dismantling of boarding any description, fixed in any position with nails, complete all as specified and directed.
S&F solid PVC wall lining (wall panelling), consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed.
M&L for stainless steel (Grade 304) railing, made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of floor or the side of waist slab with suitable arrangements, complete all as specified and directed.
Taking down carefully point wiring copper/ aluminium (light, fan, socket and power) complete including fittings such as switches, ceiling roses, pendent regulators, sockets etc and removing materials to store for keeping of safe custody or credit to contractor and making good the disturbed surfaces to match with existing surfaces, complete all as specified and directed. Note :- Fittings shall be measured and paid separately under respective items of BOQ.
M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point controlled by one way switch, and wire to be drawn in and including rigid pvc concealed conduit of dia not less tham 20mmof 2mm wall thickness complete with all accessories including GI anealed metal box 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm, complete all as specified and directed.
All as per Srl item No. 104.00 above but for one 5 Amps socket outlet on independent board, complete all as specified and directed.
All as per Srl item No. 104.00 above but wire size 2x2.5 Sqmm and and providing earth continuity wire using PVC insulated, unsheathed single core stranded copper conductor FRLS cable of size 2.5 Sqmm. to controlled the 3 pin 5 / 15 Amps socket outlet on independent board, complete all as specified and directed.
All as per Srl item No. 123.00 above but for fan point on same board with other switches, complete all as specified and directed.
S&F switch piano, flush type, one way, single pole, 5 Amps, suitable for 240 Volts, 50 Hz, AC supply, complete all as specified and directed.
S&F socket outlet, 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and directed.
S&F Switch Piano, flush type, One way, single pole, 15 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.
S&F Two in one, 3 Pin, 5/15 Amps, flush type socket outlet suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.
S&F ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, complete all as specified and directed.
S&F Stepped type, electronic fan regulator, flush type on the existing phenolic laminated sheet etc. as required complete all as directed by Engineer- in - Charge.
S&F in replacement slim linear LED lighting fixture 18 Watt LED batten with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 Sqmm copper conductor multi-standard PVC insulated 2 Core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed.
S&F in replacement surface/ recessed mounting LED luminaire 600mm x 600mm, 35/36 watt, 220 Volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S&F in replacement round shape 15 watt, 220 volts, AC, recessed type with high efficency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
S&F decorative ultra slim linear LED lighting fixture 10/12 watt LED, complete making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated 2 Core flexible cable from ceiling rose to fitting by using extra length flexible cable 2 core other than provided by manufacture, complete all as per specified and directed.
S&F LED street light fitting, 35 watt, 230 Volts, AC, outdoor type with high pressure die-cast aluminium hosing and heat resistant compete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optic complete with IP 65/66 Protection, complete all as specified and directed.
S&F decorative ultra slim linear LED lighting fixture 5/6 watt LED, complete making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated 2 Core flexible cable from ceiling rose to fitting by using extra length flexible cable 2 core other than provided by manufacture, complete all as per specified and directed.
S&F new generation energy saving LED bulk head 9/10 Watt with opal diffuser suitable for 600 LUMEN, complete all as specified and directed.
Taking down ceiling fan/ exhaust fan, ceiling cable end, dismantling blades and kept in safe custody for repairing/ servicing, complete all as specified and directed.
M&L for repair of ceiling/ exhaust fans, any sweep and size and make, obtained from Srl item No. 121.00 above and oiling, greasing after cleaning slot, over hauling and replacement of defective split pin, nuts, bolts, washer etc. including spray painting with enammeled paint with the help of spray gun and marking of MES Number with black enammeled synthetic paint, complete all as specified and directed.
Hanging or fixing only ceiling / exhaust fan of any size and type and connecting up with including provision of stranded 3 Core flexible 1 Sqmm copper conductor cable from ceiling rose or connector to fan, complete all as specified and directed.
M&L for earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick, buried in ground vertically to a depth not less than 2.25 meters below normal ground level with top edge of the earth plate at a depth not less than 1.5 meter below normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15cm of earth plate and upto 15cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following :- (a) Test point GI wire 4mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tighted on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits). (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.
S&F earth continuity conductor or main earthing lead, fixed to wall on batten or recess or chases or buried in ground or drawn in conduit pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 6mm dia galvanised iron or steel wire, complete all as specified and directed
S&F sheet metal VTPN DBs - 160 Amp, double door, 4 Way (optimum F2+12) with metal door, 415 volts grade, IP-43 Protection Grade, fixed flush to wall complete including connections should be provide with necessary reducer lugs, complete all as specified and directed.
S&F MCCB adjustable type, 160 Amps with breaking capacity 36 KA, 4 pole, 415 Volt, complete all as specified and directed.
S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply double door SPN DB system 8 ways, complete all as specified and directed.
S&F 'C' series SPN MCB 40 to 63 Amp Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc, complete all as specified and directed.
S&F connection and testing MCB SP 6-32 Amps 'B' Curve, complete all as specified and directed.
M&L for submain wiring with two run single core 6 Sqmm FRLS copper counductor cable PVC insulated, unsheathed, 1100 Volt including 25mm dia PVC concealed conduit medium grade ISI marked with all accessories such as tees, elbows, junction boxes etc. as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheated copper counductor cable as continuous earth wire and connecting to exisiting main switch board/ distribution board and testing on completion etc, complete all as specified and directed. Note :- Two runs of 6 Sqmm and one run of 6 Sqmm cable and one run of PVC conduit/ casing caping shall be measusred as one unit.
Notes :- An amount of Rs. 1,02,731.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.
SINGH CONST CO (BID ID -3069077)
M/s ARJUN SINGH (BID ID -3074489)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .