Construction of new 1x5MVA 33/11kv substation, two sources 33kv line kurusato and rajatalab, new 11kv feeder sharauni and shifting 11kv line kurusato dist. Varanasi on turnkey basis.

SUPPLY OF MATERIALS FOR CONSTRUCTION OF NEW 1X5MVA, 33/11 KV SUBSTATION, GANJARI, DIST. VARANASI

Terminal Gantry as per RESPO Norms

Main bus bar complete with structure :-(A) Bus bar gantry (B) Disc insulator polymeric type (C) Disc fitting polymeric type as per RESPO Norms.

33 Kv pin insulator Polymeric composite

33 Kv line Isolator

33 Kv bus isolator

33 Kv post insulator

33 Kv lightening arrestor

33 Kv PT single phase 33 kv/110volt

Structure for post insulator as per RESPO Norms

Structure for L.A. as per RESPO Norms

Structure for 33 Kv PT as per RESPO Norms

Structure for line & bus isolator as per RESPO Norms

5 MVA, 33/11 kV power T/F

90 lbs rail pleces for T/F plinth (44.64 Kg/mtr) (2 No.) as per RESPO Norms

33 Kv VCB with single T/F control panel CTR 200/100/1A with CT structure:- (A)-33 Kv VCB with steel structure.

(B)- Control pannel I/C for 33 Kv single T/F

(C)- 33 Kv CT 200/100/1A

(D)- CT Structure as per RESPO Norms

11 Kv I/C VCB 600/300/5A 350MVA 1250 A

11 Kv O/G VCB 200/100/5A

11 Kv cable 3x300Sqmm XLPE

11 Kv cable 3x185Sqmm XLPE

ACSR DOG conductor

ACSR WEASEL conductor

63 KVA 11/0.4Kv T/F

ST Pole 11 mtr long (01 No D/P for S/S T/F, 01 No. D/P for O/G feeder) as per RESPO Norms

PCC 8.5mtr long (08 No S/P for LT line) as per RESPO Norms

Top channel 100x50x6-2240 mm long as per RESPO Norms

11 Kv MS channel for dropper 100x50x6-2028 mm long as per RESPO Norms

MS bracing angle 65x65x6-2700 mm long as per RESPO Norms

11 Kv MS channel 75x75x6-2028mm long with clamp & bolt and nut for T/F base as per RESPO Norms

Stay Rod 16x1800 mm as per RESPO Norms

Stay Wire 7/10 SWG as per RESPO Norms

11 kv disc insulator polymeric

11 kv disc fitting

11 kv pin insulator polymeric

MS earthing rod 20x2500 mm with 6SWG earthing wire as per RESPO Norms

LT Shakle insulator

11 kV TPMO as per RESPO Norms

11 kV fuse set with all fixing clamp & nuts, bolts as per RESPO Norms

MS channel 100x50x6mm-3000mm long for fabrication of cable stand and neutral earthing stand for power T/F as per RESPO Norms

MS flat 50*6mm for fabrication of cable stand and neutral earthing stand for power T/F

Battery Charger 24 V (Float cum boost charger)

24 V Battery set (12 nos.x 2V) 200 Ah with stand

Control cable 2x2.5 MM2 (Armored type)

Control cable 4x2.5 MM2 (Armored type)

Control cable 6x2.5 MM2 (Armored type)

Control cable 10x2.5 MM2 (Armored type)

Sub station name and arrow shine board complete by providing MS sheet 1220x1220x4 mm and MS angle 50x50x5 mm

Clamp and connector for 33 kV switchyard equipments (LA, CT, PT, BKR & T/F)

LT distribution board/panel 440V, 63Amp, 12way type (for testing of T/F VCB etc in switchyard)

CT Junction box (for control cable wiring)

PT Junction box (for control cable wiring)

LT PVC Armoured Alluminium cable 4x16sqmm

Cable Glands of all size (For LT panel, control panel, CT & PT junction box, 11kV panel etc)

Furniture of S/s (04 No wooden chair with 01 No wooden Table)

Fire fighting extinguisher (6kg) of sub station as per ISI specification including mounting on wall with the help of clamp

Neutral cum earth GI Wire7.16mm or 16 SWG

Fire bucket stand with 04 no. buckets (For switchgear/control room & switchyard) as per RESPO Norms

Break down, shut down, rostering name MS sheet board 02 No each as per RESPO Norms

Sodium vapor/Murcary LED lamp 250W complete fitting and of standard quality ISI mark with water light fittings, elbow etc. complete in all respect and suitable for above supports for switchyard lighting

11 Kv cable jointing kit 3x300mm2 O/D (Make-Raychem/3M)

11 Kv cable jointing kit 3x300mm2 I/D (Make-Raychem/3M)

11 Kv cable jointing kit 3x185mm2 O/D (Make-Raychem/3M)

11 Kv cable jointing kit 3x185mm2 I/D (Make-Raychem/3M)

G.I pipe 100mm dia

Rubber matt 2*1.5mtr, 3mm thick as per IS standard

"E" Bracket as per RESPO Norms

Top channel clamp as per RESPO Norms

Dropper angle clamp as per RESPO Norms

Bracing angle clamp as per RESPO Norms

Stay clamp as per RESPO Norms

Earth wire clamp as per RESPO Norms

LT Schakle insulator clamp as per RESPO Norms

Danger board & clamp with nut & bolt as per RESPO Norms

Stone Pad 300x300x75 mm as per RESPO Norms

Cable holding clamp as per RESPO Norms

PG clamp for dog conductor as per RESPO Norms

Spacer LT PVC

Red oxide paint

Allu. Paint

T/F base Clamp as per RESPO Norms

Bolts & Nuts all Size as per RESPO Norms

ERECTION OF CONSTRUCTION OF NEW 1X5MVA, 33/11 KV SUBSTATION, GANJARI, DIST. VARANASI

Disc insulator polymeric type

Disc fitting polymeric type

33 Kv pin insulator Polymeric composite

33 Kv line Isolator

33 Kv bus isolator

33 Kv post insulator

33 Kv lightening arrestor

33 Kv PT single phase 33 kv/110volt

5 MVA, 33/11 kV power T/F

90 lbs rail pleces for T/F plinth (44.64 Kg/mtr) (2 No.)

33 Kv VCB with single T/F control pannel CTR 200/100/1A with CT structure. (A)- 33 Kv VCB with steel structure

(B)- Control pannel I/C for 33 Kv single T/F

(C) - 33 Kv CT 200/100/1A

ACSR DOG conductor

ACSR WEASEL conductor

63 KVA 11/0.4Kv T/F

ST Pole 11 mtr long (01 No D/P for S/S T/F, 01 No. D/P for O/G feeder)

PCC 8.5mtr long (08 No S/P for LT line)

Top channel 100x50x6-2240 mm as per RESPO norms

11 Kv MS channel for dropper 100x50x6-2028 mm as per RESPO norms

MS bracing angle 65x65x6-2700 mm long as per RESPO norms

11 Kv MS channel 75x75x6-2028mm with clamp & bolt and nut for T/F base as per RESPO norms

Stay Rod 16x1800 mm as per RESPO norms

Stay Wire 7/10 SWG as per RESPO norms

11 kv disc insulator polymeric

11 kv disc fitting

11 kv pin insulator polymeric

MS earthing rod 20x2500 mm and 6 SWG earthing wire etc.

LT Shakle insulator

11 kV TPMO as per RESPO norms

11 kV fuse set with fixing clamp as per RESPO norms

MS channel 100x50x6mm-3000mm long for fabrication of cable stand and neutral earthing stand for power T/F

MS flat 50*6mm for fabrication of cable stand and neutral earthing stand for power T/F

Battery Charger 24 V (Float cum boost charger)

24 V Battery set (12 nos.x 2V) 200 Ah with stand

Control cable 2x2.5 MM2 (Armored type)

Control cable 4x2.5 MM2 (Armored type)

Control cable 6x2.5 MM2 (Armored type)

Control cable 10x2.5 MM2 (Armored type)

Sub station name and arrow shine board complete by providing MS sheet 1220x1220x4 mm and MS angle 50x50x5 mm

Clamp and connector for 33 kV switchyard equipments (LA, CT, PT, BKR & T/F)

LT distribution board/panel 440V, 63Amp, 12way type (for testing of T/F VCB etc in switchyard)

CT Junction box (for control cable wiring)

PT Junction box (for control cable wiring)

LT PVC Armoured Alluminium cable 4x16sqmm

Cable Glands of all size (For LT panel, control panel, CT & PT junction box, 11kV panel etc)

Fire fighting extinguisher (6kg) of sub station as per ISI specification including mounting on wall with the help of clamp

Neutral cum earth GI Wire7.16mm or 16 SWG

Fire bucket stand with 04 no. buckets (For switchgear/control room & switchyard) as per RESPO Norms

Break down, shut down, rostering name MS board 02 No each as per RESPO Norms

Sodium vapor/Murcary LED lamp 250W complete fitting and of standard quality ISI mark with water light fittings, elbow etc. complete in all respect and suitable for above supports for switchyard lighting

G.I pipe 100mm dia

Rubber matt 2*1.5mtr, 3mm thick as per IS standard

"E" Bracket as per RESPO Norms

Top channel clamp as per RESPO Norms

Dropper angle clamp as per RESPO Norms

Bracing angle clamp as per RESPO Norms

Stay clamp as per RESPO Norms

Earth wire clamp as per RESPO Norms

LT Schakle insulator clamp as per RESPO Norms

Danger board & clamp with nut & bolt as per RESPO Norms

Stone Pad 300x300x75 mm as per RESPO Norms

Cable holding clamp as per RESPO Norms

PG clamp for dog conductor as per RESPO Norms

Spacer LT PVC

Red oxide paint for painting of ST pole

Alluminium paint for painting of ST pole

T/F base angle clamp as per RESPO Norms

Bolts & Nuts all Size as per RESPO Norms

Grouting, concreting & plinthing of PCC/ ST poles as per RESPO Norms

Concreting of stay as per RESPO Norms

Earthing of S/s outdoor equipments as per RESPO norms: Laying of earth mat in the switchyard by laying of MS round of 32 mm dia in 1000mm deep trenches with MS round 32 mm dia, 3 mtr long earth electrodes as per RESPO norms. The work includes welding of the MS round, conneting all steel structures in the switchyard with the earth mat by means of GI strips of size 50x6mm as per item below. (All required materials will be provided by contractor). (A)- Excavation of earth for laying mat

(B)- Driving of earth electrode (32mm dia, 3 mtr long)

(C)- Laying of earth mat (MS) bar including cutting, shaping and binding etc.

(D)- Preparation of joints, proper making and welding of main earth mat bar joints and applying bitumen impregnated on joints i.e. end joints, cross joints and lap joints

(E)- Welding of riser strip with earth mat and department structure body (One set means one riser strip welding to main equipments.)

Earthing of S/s for indoor equipments as per RESPO norms: By way of boring and lowering 'B' class GI pipe 2'' dia, - 3no*20 mtr deep (02 no for both side of switchgear room in delta connection earthing and making earthing pit for each) by providing all materials like 'B' class GI pipe 2'' dia, 50*6mm GI strip, socket, sand, charcoal, bricks, cement etc.(All required materials will be provided by contractor)

Digging & Making of 1000 wide and 1000 mm deep size Pakka cable trench by providing cement, fine red sand, 1st class bricks & C.C. trench cover for laying of 11 kV 3x300 sqmm XLPE cable from both 5MVA Transformer. (All required materials like cements, fine red sands, 1st class bricks & C.C. trench cover, MS angle etc will be provided by contractor)

Laying & dressing of 11 kV, 3*300 sqmm underground cable with double circuit configuration from 5MVA T/F to 11 kV incoming switchgear in the trench 1000mm wide, 1000mm deep size Pakka trench providing 150mm fine red sand, cushion beneath and 650 mm fine red sand cushion above the cable and place three layers 1st class bricks between the cable. The cable shall be duly protected by C.C. trench cover. (All required materials likes fine red sand, 1st class bricks & 75 mm thick stone slab etc. will be provided by contractor)

Digging & making of 1000 wide and 1000 mm deep size cable trench by providing fine red sand, 1st class bricks & 75mm thick saparate stone slab for each 11 kV 3x185 sqmm XLPE cable (All required materials like fine red sands, 1st class bricks & 75 mm thick stone slab etc will be provided by contractor)

Laying & dressing of 11 kV,3*185 sqmm underground cable with double circuit configuration in the trench 1000mm wide, 1000mm deep size Pakka trench providing 150mm fine red sand, cushion beneath and 650 mm fine red sand cushion above the cable and place three layers 1st class bricks between the cables. The cable shall be duly protected by 1st class bricks, fine red sand & 75mm thick saparate stone slab for each cable.(All required materials likes fine red sand, 1st bricks & 75mm thick stone slab etc. will be provided by contractor)

Plinth & foundation for T/F: Construction of plinth of size 3.50x4.50 Mtr. For 5 MVA T/F having 1.0 Mtr above ground level. The work including excavation of foundation base concreting in CC 1:6:12 ratio (cement, fine red sand & brick ballast) first class brick work in cement morter of ratio 1:4 foundation CC in 1:4:8 ratio (cement, fine red sand & brick blast) and RCC working ratio 1:2:4 (cement, coarse sand and store grit of 20mm gauge using MS Bars of 10mm dia (tor) in reinforcement including its cutting, bending & binding in required shape. The work also includes laying of 2 nos. 3.46 Mts. long each rail places complete with cutting welding & proper fitting etc. The plinth will be made as per drawing and shall be plastered/finished on top and sides of the plinth. (All required materials for civil work like sands, bricks, cement, MS bars, stone grits etc. will be provided by contractor)

Plinth & foundation for 33 kV VCB: Construction of plinth of size 2.0 mtr x 1.5 mtr x 0.9 mtr suitable for erection of upper structure for 33 kV VCB including grouting of anchor bolts in proper alignment and level. Scope of work includes excavation of foundation base concreting in CC 1:6:12 (cement, fine red sand & brick ballast ), 1st class brick work in cement mortor of ratio 1:4 CC in ratio 1:4:8 and RCC work in ratio 1:2:4 (cement coarse sand and stone grit of 20mm gauge) as per RESPO drawing. (All required materials for civil work like sands, bricks, cement, MS bars, stone grits etc. will be provided by contractor)

Digging & Making of Pakka cable trench 450mm wide and 900 mm deep by providing cement, sand, bricks & C.C. trench cover for laying of various size of control cable (All required materials like cements, sands, bricks & C.C. trench cover etc will be provided by contractor)

FABRICATION OF TRANSFORMER SEPARATE EARTHING T/F NEUTRAL EARTHING: (A) Seprate earthing of power T/F by way of boring and lowering GI pipe 2'' dia, - 3no*20 mtr deep (02 no for T/F body earthing and 01 no for T/F neutral in delta connection earthing and making earthing pit for each) by providing all materials like GI pipe 2'' dia, 50*6mm GI strip, socket, sand, bricks, cement etc. (All required materials will be provided by contractor).(B) Fabrication and grouting of M.S Channel 100*50*6mm in L- shape with 50*6mm GI strip & in proper size and alignment to provide support for the two separate earthing strips for power transformer neutral including supply and fixing of two nos flexible copper bond for neutral earthing.

Fabrication and erection of cable support made of two pieces of M.S channel 100x50mm,3.0 mtr long joined to each other by means of 5 nos M.S Flat 50x6mm places of size 150 mm long each by welding at equal intervals and grouting in a block of size 400x400x700mm complete with one coat of red oxide paint and two coat of alluminium paint. (All required materials will be provided by contractor)

Fixing & jointing of 11 kV,3x300 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 kV,3x300 sqmm XLPE cable Indoor jointing kits on switchgears after carefully removing the insulation of the cable, duly plumbing and taping of cable providing,fixing and crimpling of proper size good quality lugs, duly plumbing and taping of cable properly fixing of lugs on switchgears and boxes complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 Kv 3x185 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 kV,3x185 sqmm XLPE cable Indoor jointing kits on switchgears after carefully removing the insulation of the cable, duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs, duly plumbing and taping of cable properly fixing of lugs on switchgears and boxes complete work (All required materials will be provided by contractor)

Hosting of 11 kV,3*185 sqmmXLPE cable with 100 mm Dia, 3.5 mtr long GI Pipe on the outgoing feeder cable before mounting the cable on the double pole, lifting, mounting and clamping of 11 kV feeder cable boxes on the feeder double pole structure and making connection

Hosting of 11 kV 3*185 sqmm XLPE cable to 11 outgoing feeder switchgear, 11/0.4 kV T/F & 11 kV 3*300 sqmm XLPE cable from 33/11 kV T/F to 11 kV Incommer switchgears

Painting of all structures by red oxide & allumiunium paint (All required materials like red oxide, alluminium paints will be provided by contractor)

Cost for miscelneous works like sandry store, soil filling & leveling, Laying of Bricks in switchyard, T/F cleaning, approach road for switchyard & others misc. work.

INSTALLATION OF 11kV SWITCHGEARS & CONTROL PANEL IN CONTROLROOM:- (A) Shifting carefully & safely 11kV I/C, O/G switchgear from outside of the switchgear room as per direction of Engineer in charge- 03 Nos, (B)- Fixing and making bus bar connections in between all switchgears-01 No., & (C) Shifting carefully & installation of 33 kV single circuit transformer control panel in control room- 01 No. (All required materials will be provided by contractor)

FABRICATION, ERECTION & GROUTING OF S/s STRUCTURE:- (A) BUS BAR GANTRY & TERMINAL GANTRY:-Fabrication, erection, & grouting of Bus bar gantry/ terminal gantry using rail pole and channel -03 Nos. as per RESPO drawing norms.(B)- Fabrication of bus isolator & line structure- 03 Nos as per RESPO drawing norms., (C) Fabrication of Lightening Arrestor structure/CT structure/PT structure- 05 Nos. as per RESPO drawing norms. & (D) Fabrication of Post structure-06 Nos. as per RESPO drawing norms

Cartage of all material

Erection charge of Power Transformer

SUPPLY OF MATERIALS FOR CONSTRUCTION OF NEW 33 KV LINE FOR 33/11 KV SUBSTATION GANJARI, DIST. VARANASI FROM 132KV SUBSTATION KURUSATO DISTT- VRARANASI

ST Pole 11 mtr long as per RESPO Norms

ST Pole 13 mtr long as per RESPO Norms

33 KV V type X-Arm 100x50x6 mm, MS channel for STP 11mtr/PCC 9Mtr as per RESPO Norms

ACSR DOG conductor (6.5Km x3+3%)=13.9Km as per RESPO Norms

33 KV Disc insulator B&S type Polymeric 70KN as per RESPO Norms

Disc fitting 70KN as per RESPO Norms

33 KV Pin insulator Polymeric composite as per RESPO Norms

33 kV Top channel 125x65x6mm- 3200mm as per RESPO Norms

33 kV Bracing angle 65x65x6mm- 4300mm as per RESPO Norms

33 KV 3x300 sqmm XLPE cable (3.755Kmx2+0.020x48= 8.470km)

33 KV 3x300 sqmm cable jointing kit outdoor type (Make-Raychem/3M)

33 KV 3x300 sqmm cable Straight through (Make-Raychem/3M)

33 KV Stay rod 20x1800 mm as per RESPO Norms

Stay Wire 7/8SWG as per RESPO Norms

Dropper channel 125x65x6mm-3200mm as per RESPO Norms

Earthing rod 20x2500 mm as per RESPO Norms

GI wire 5mm as per RESPO Norms

GI wire 4mm as per RESPO Norms

X-Arm holding clamp for STP 11/13M with N&B as per RESPO Norms

Top channel clamp for STP 11/13 mtr with N&B as per RESPO Norms

Dropper angle clamp for STP 11/13 mtr with N&B as per RESPO Norms

Bracing angle clamp for STP 11/13 mtr with N&B as per RESPO Norms

Guarding angle clamp for STP 11/13 mtr with N&B as per RESPO Norms

GI/GS earth wire as per RESPO Norms

MS angle 65x65x6mm (for guarding angle (2.7mtrx130Nox5.8kg/mtr=2035 kg) as per RESPO Norms

33 KV 'E' bracket as per RESPO Norms

F/T bracket with clamp for STP as per RESPO Norms

PG clamp for DOG conductor as per RESPO Norms

Earth wire clamp with N&B as per RESPO Norms

HDPE Pipe 160mm Dia, OD PN-4 PE-80 Grade UV stabilized as per IS 4984

Danger Board 33 KV with clamp as per RESPO Norms

MS channel 100x65x6mm for side & high Bracket

MS angle 65x65x6mm for side & high Bracket

Number plate as per RESPO Norms

Cable route marker per 50 mtr (Hight x Wide = 40'' x 10'') and Thickness = 3''

GI Barbed wire as per RESPO Norms

Nut & bolts with washer as per RESPO Norms

Stone pad 300x300x75mm as per RESPO Norms

GI pipe 6'' dia as per RESPO Norms

Red oxide paint

Allu. Paint

Cable holding clamp as per RESPO Norms

ERECTION OF CONSTRUCTION OF NEW 33 KV LINE FOR 33/11 KV SUBSTATION GANJARI, DIST. VARANASI FROM 132KV SUBSTATION KURUSATO DISTT- VRARANASI

Erection, Grouting and concreting of 11M ST pole along with plinthing and muffing as per RESPO norms

Erection, Grouting and concreting of 13M ST pole along with plinthing and muffing as per RESPO norms

33 KV V type X-Arm 100x50x6 mm, MS channel for STP 11mtr/PCC 9Mtr as per RESPO norms

ACSR DOG conductor (6.5Km x3+3%)=13.9Km stringing, jumpering etc as per RESPO Norms

33 KV Disc insulator B&S type Polymeric 70KN

Disc fitting 70KN as per RESPO norms

33 KV Pin insulator Polymeric composite as per RESPO norms

33 kV Top channel 125x65x6mm- 3200mm as per RESPO Norms

33 kV Bracing angle 65x65x6mm- 4300mm as per RESPO Norms

Erection and concreting of Stay rod 20x1800 mm as per RESPO norms

Stay Wire 7/8SWG as per RESPO norms

Dropper channel 125x65x6mm-3200mm as per RESPO norms

Earthing rod 20x2500 mm as per RESPO norms

GI wire 5mm as per RESPO norms

GI wire 4mm as per RESPO norms

X-Arm holding clamp for STP 11/13M with N&B as per RESPO norms

Top channel clamp for STP 11/13 mtr with N&B as per RESPO norms

Dropper angle clamp for STP 11/13 mtr with N&B as per RESPO norms

Bracing angle clamp for STP 11/13 mtr with N&B as per RESPO norms

Guarding angle clamp for STP 11/13 mtr with N&B as per RESPO norms

GI/GS earth wire as per RESPO norms

MS angle 65x65x6mm (for guarding angle (2.7mtrx130Nox5.8kg/mtr=2035 kg) as per RESPO norms

33 KV 'E' bracket as per RESPO norms

F/T bracket with clamp for STP

PG clamp for DOG conductor

Earth wire clamp with N&B as per RESPO norms

HDPE Pipe 160mm Dia, OD PN-4 PE-80 Grade UV stabilized as per IS 4984

Danger Board 33 KV with clamp as per RESPO norms

MS channel 100x65x6mm for side & high Bracket

MS angle 65x65x6mm for side & high Bracket

Number plate as per RESPO norms

Cable route marker per 50 mtr (Hight x Wide = 40'' x 10'') and Thickness = 3''

GI Barbed wire as per RESPO norms

Nut & bolts with washer

Stone pad 300x300x75mm as per RESPO norms

GI pipe 6'' dia as per RESPO norms

Red oxide paint as per RESPO norms

Allu. Paint as per RESPO norms

Cable holding clamp as per RESPO norms

Trimming of tree branches on the way of line

Laying & dressing of 160mm dia HDPE pipe below railway track by HDD method after digging of pit

Laying & dressing of 33kV 3x300 sqmm XLPE cable into 160mm dia HDPE pipe below railway track including loop by HDD method as per RESPO norms (fine red sand, 1st class bricks & 75mm thick stone slab will be provided by contractor for loop cable safety)

Laying & dressing of 160mm dia HDPE pipe below 02 no highway track by HDD method after digging of pit

Laying & dressing of 33kV 3x300 sqmm XLPE cable into 160mm dia HDPE pipe below highway road including loop by HDD method as per RESPO norms (fine red sand, 1st class bricks & 75mm thick stone slab will be provided by contractor for loop cable safety)

Laying & dressing of 33 kV,3*300 sqmm underground cable with double circuit configuration after digging and making of 680mm wide, 1200mm deep, 3140 mtr long size the trench providing 150mm fine red sand, cushion beneath and 150 mm fine red sand cushion above the cable and place three layers 1st class bricks between the cables and edge of both cable. The cables and cable loop shall be duly protected by 1st class bricks, fine red sand & 75mm thick saparate stone slab for each cable. (All required materials likes fine red sand, 1st bricks & 75mm thick stone slab etc. will be provided by contractor)

Making & jointing of 33 KV 3x300 sqmm cable jointing kit (outdoor)

Making & jointing of 33 KV 3x300 sqmm straight through

Hoisting of 33 KV cable on errected pole support & clamping

Cartage of 33 Kv 3x300Sqmm XLPE cable

Cartage charge of all other material

SUPPLY OF MATERIALS FOR CONSTRUCTION OF ALTERNATE SOURCE OF 33KV LINE FOR 33/11KV SUBSTATION GANJARI FROM 132 KV SUB-STATION RAJATALAB DISTT- VARANASI.

ST Pole 11 mtr long as per RESPO Norms

ST Pole 13 mtr long as per RESPO Norms

33 KV V type X-Arm 100x50x6 mm, MS channel for STP 11mtr/PCC 9Mtr as per RESPO Norms

ACSR DOG conductor (3.6Km x3+3%)=11.12Km as per RESPO Norms

33 KV Disc insulator B&S type Polymeric 70KN as per RESPO Norms

Disc fitting DOG 70KN as per RESPO Norms

33 KV Pin insulator Polymeric composite as per RESPO Norms

33 kV Top channel 125x65x6mm- 3200mm as per RESPO Norms

33 kV Bracing angle 65x65x6mm- 4300mm as per RESPO Norms

33 KV 3x300 sqmm XLPE cable (1.870Kmx2+0.020x24= 4.420Km)

33 KV 3x300 sqmm cable jointing kit outdoor type (Make-Raychem/3M)

33 KV 3x300 sqmm cable Straight through (Make-Raychem/3M)

33 KV Stay rod 33kV as per RESPO Norms

Stay Wire 7/8swg as per RESPO Norms

Dropper channel 125x65x6-3200mm as per RESPO Norms

Earthing rod 20x2500 mm as per RESPO Norms

GI wire 5mm as per RESPO Norms

GI wire 4mm as per RESPO Norms

X-Arm holding clamp with N&B for STP 11/13 mtr as per RESPO Norms

MS Guarding angle 65x65x6mm (2.7mtrx32Nox5.8kg/mtr=501kg) as per RESPO Norms

Top channel clamp for STP 11/13M with N&B as per RESPO Norms

Dropper angle clamp for STP 11/13M with N&B as per RESPO Norms

Bracing angle clamp for STP 11/13M with N&B as per RESPO Norms

Guarding angle clamp for STP 11/13M with N&B as per RESPO Norms

GI/GS earth wire as per RESPO Norms

Stay clamp with N&B as per RESPO Norms

33 KV 'E' bracket as per RESPO Norms

F/T bracket with clamp for STP as per RESPO Norms

PG clamp for DOG conductor as per RESPO Norms

Danger Board 33 KV with clamp as per RESPO Norms

MS channel 100x65x6mm for side & high Bracket as per RESPO Norms

MS angle 65x65x6mm for side & high Bracket as per RESPO Norms

HDPE Pipe 160mm Dia, OD PN-4 PE-80 Grade UV stabilized as per IS 4984

Number plate as per RESPO Norms

Cable route marker per 100 mtr (Hight x Wide = 40'' x 10'') and Thickness = 3''

Earth wire clamp with N&B as per RESPO Norms

GI Barbed wire as per RESPO Norms

Nut & bolts with washer as per RESPO Norms

Stone pad 300x300x75mm as per RESPO Norms

GI pipe 6'' dia as per RESPO Norms

Red oxide paint

Allu. Paint

Cable holding clamp as per RESPO Norms

ERECTION OF CONSTRUCTION OF ALTERNATE SOURCE OF 33KV LINE FOR 33/11KV SUBSTATION GANJARI FROM 132 KV SUB-STATION RAJATALAB DISTT- VARANASI.

Erection, Grouting and concreting of 11M ST pole along with plinthing and muffing as per RESPO norms

Erection, Grouting and concreting of 13M ST pole along with plinthing and muffing as per RESPO norms

33 KV V type X-Arm 100x50x6 mm, MS channel for STP 11mtr/PCC 9Mtr as per RESPO norms

ACSR DOG conductor (3.6Km x3+3%)=11.12Km stringing, jumpering etc as per RESPO Norms

33 KV Disc insulator B&S type Polymeric 70KN as per RESPO norms

Disc fitting DOG 70KN as per RESPO norms

33 KV Pin insulator Polymeric composite as per RESPO norms

33 kV Top channel 125x65x6mm- 3200mm as per RESPO norms

33 kV Bracing angle 65x65x6mm- 4300mm as per RESPO norms

Erection & concreting of 33 KV Stay rod 20x1800 mm as per RESPO norms

Stay Wire 7/8SWG as per RESPO norms

Dropper channel 125x65x6-3200mm as per RESPO norms

Earthing rod 20x2500 mm as per RESPO norms

GI wire 5mm as per RESPO norms

GI wire 4mm as per RESPO norms

X-Arm holding clamp with N&B for STP 11/13 mtr as per RESPO norms

MS Guarding angle 65x65x6mm (2.7mtrx32Nox5.8kg/mtr=501kg) as per RESPO norms

Top channel clamp for STP 11/13M with N&B as per RESPO norms

Dropper angle clamp for STP 11/13M with N&B as per RESPO norms

Bracing angle clamp for STP 11/13M with N&B as per RESPO norms

Guarding angle clamp for STP 11/13M with N&B as per RESPO norms

GI/GS earth wire as per RESPO norms

Stay clamp with N&B as per RESPO norms

33 KV 'E' bracket as per RESPO norms

F/T bracket with clamp for STP as per RESPO norms

PG clamp for DOG conductor as per RESPO norms

Danger Board 33 KV with clamp as per RESPO norms

MS channel 100x65x6mm for side & high Bracket

MS angle 65x65x6mm for side & high Bracket

HDPE Pipe 160mm Dia, OD PN-4 PE-80 Grade UV stabilized as per IS 4984

Number plate as per RESPO norms

Cable route marker per 100 mtr (Hight x Wide = 40'' x 10'') and Thickness = 3''

Earth wire clamp with N&B as per RESPO norms

GI Barbed wire as per RESPO norms

Nut & bolts with washer

Stone pad 300x300x75mm as per RESPO norms

GI pipe 6'' dia as per RESPO norms

Red oxide paint as per RESPO norms

Allu. Paint as per RESPO norms

Cable holding clamp as per RESPO norms

Trimming of tree branches on the way of line

Laying & dressing of 160mm HDPE pipe below 02 no highway track by HDD method after digging of pit

Laying & dressing of 33kV 3x300 sqmm XLPE cable into 160mm HDPE pipe below railway track including loop by HDD method as per RESPO norms (fine red sand, 1st class bricks & 75mm thick stone slab will be provided by contractor for loop cable safety)

Laying & dressing of 33 kV,3*300 sqmm underground cable with double circuit configuration after digging and making of 680mm wide, 1200mm deep, 860 mtr long size the trench providing 150mm fine red sand, cushion beneath and 150 mm fine red sand cushion above the cable and place three layers 1st class bricks between the cables and edge of both cable. The cables and cable loop shall be duly protected by 1st class bricks, fine red sand & 75mm thick saparate stone slab for each cable.(All required materials likes fine red sand, 1st bricks & 75mm thick stone slab etc. will be provided by contractor)

Making & jointing of 33 KV 3x300 sqmm cable jointing kit (outdoor)

Making & jointing of 33 KV 3x300 sqmm straight through

Hoisting of 33 KV cable on errected pole support & clamping

Cartage of 33 Kv 3x300Sqmm XLPE cable

Cartage charge of all other material

SUPPLY OF MATERIALS FOR SHIFTING & CONSTRUCTION OF 11 KV OVERHEAD LINE WITH 11KV 3X120 SQMM XPLE CABLE DUE TO SPACE CONSTRAINT NEAR SHARAUNI VILLAGE, VARANASI FOR CONSTRUCTION OF NEW 33KV LINE FOR 1X5MVA SUBSTATION GANJARI DISTT-VARANASI

PCC Pole 8.5 mtr long as per RESPO Norms

ACSR WEASEL conductor as per RESPO Norms

11 KV 3x120 sqmm XLPE cable (1590Kmx2+52x1= 3.700)

11 KV 3x120 sqmm cable jointing kit outdoor type (Make-Raychem/3M)

11 KV 3x120 sqmm cable Straight through (Make-Raychem/3M)

Stay rod 11kV 16x1800 mm as per RESPO Norms

Stay wire 7/10SWG as per RESPO Norms

Dropper channel 100x50x6mm-2250mm as per RESPO Norms

Earthing rod 20x2500 mm as per RESPO Norms

GI wire 5mm for overhead cable support as per RESPO Norms

Cable holding clamp with N&B/feet for tying cable with GI wire 5mm as per RESPO Norms

MS angle 65x65x6mm-1200mm for cable (1.2mtrx104Nox5.8kg/mtr=723kg)

Dropper angle clamp with N&B as per RESPO Norms

Clamp for MS angle with N&B as per RESPO Norms

Stay clamp with N&B as per RESPO Norms

GI/GS earth wire as per RESPO Norms

PG clamp for DOG conductor as per RESPO Norms

Earth wire clamp with N&B as per RESPO Norms

Danger Board 11 KV with clamp N&B as per RESPO Norms

Number plate as per RESPO Norms

GI Barbed wire as per RESPO Norms

Nut & bolts with washer

Stone pad 300x300x75mm as per RESPO Norms

ERECTION OF SHIFTING & CONSTRUCTION OF 11 KV OVERHEAD LINE WITH 11KV 3X120 SQMM XPLE CABLE DUE TO SPACE CONSTRAINT NEAR SHARAUNI VILLAGE, VARANASI FOR CONSTRUCTION OF NEW 33KV LINE FOR 1X5MVA SUBSTATION GANJARI DISTT-VARANASI

Erection & Grouting of PCC Pole 8.5 mtr long as per RESPO Norms

ACSR WEASEL conductor stringing, jumpering etc as per RESPO Norms

Erection and grouting of Stay rod 11kV 16x1800 mm as per RESPO Norms

Stay wire 7/10SWG as per RESPO Norms

Dropper channel 100x50x6mm-2250mm as per RESPO Norms

Earthing rod 20x2500 mm as per RESPO Norms

GI wire 5mm for overhead cable support

Cable holding clamp with N&B/feet for tying cable with GI wire 5mm

MS angle 65x65x6mm-1200mm for cable (1.2mtrx104Nox5.8kg/mtr=723kg)

Dropper angle clamp with N&B as per RESPO Norms

Clamp for MS angle with N&B as per RESPO Norms

Stay clamp with N&B as per RESPO Norms

GI/GS earth wire as per RESPO Norms

PG clamp for DOG conductor as per RESPO Norms

Earth wire clamp with N&B as per RESPO Norms

Danger Board 11 KV with clamp N&B as per RESPO Norms

Number plate as per RESPO Norms

GI Barbed wire as per RESPO Norms

Nut & bolts with washer

Stone pad 300x300x75mm as per RESPO Norms

Stringing and tying of 11 kV, 3x120 sqmm XLPE cable with GI wire 5mm on PCC pole

Dismantling of 11kV overhead ACSR WEASEL conductor, X-arm etc and shift to concerning department store

Dismantling of existed 8.5mtr PCC poles and shift to concerning department store

Making & jointing of 11 kV 3x120 sqmm cable jointing kit (outdoor)

Making & jointing of 33 KV 3x300 sqmm straight through

Cartage of 11 Kv 3x120Sqmm XLPE cable

Cartage charge of all other material

SUPPLY OF MATERIALS FOR CONSTRUCTION OF NEW 11 KV LINE FOR SHARAUNI FEEDER FROM 33/11KV SUBSTATION, GANJARI, DIST. VARANASI.

ST Pole 11 mtr long as per RESPO Norms

11 Kv 'V' type X-arm as per RESPO Norms

ACSR WEASEL conductor as per RESPO Norms

11kv 3x185 sqmm XLPE cable

11 Kv disc insulator 45 KN Polymer type as per RESPO Norms

11 Kv disc fitting 45 KN Polymer type as per RESPO Norms

11 Kv pin insulator Polymer type as per RESPO Norms

11 Kv top channel 100x50x6-2240 mm as per RESPO Norms

11 Kv MS iron bracing angle 65x65x6-2700 mm as per RESPO Norms

MS Dropper channel 100*50*6mm-2200 mm as per RESPO Norms

11 kV T-off Channel as per RESPO Norms

11 Kv stay rod 16x1800mm as per RESPO Norms

Stay wire 7/10 SWG as per RESPO Norms

Earthing rod 20x2500 mm as per RESPO Norms

G.I wire 5mm as per RESPO Norms

G.I wire 4mm as per RESPO Norms

Cross arm clamp as per RESPO Norms

Top channel clamp as per RESPO Norms

Bracing Angle clamp as per RESPO Norms

Guard angle clamp as per RESPO Norms

Stay Clamp as per RESPO Norms

Dropper channel clamp as per RESPO Norms

T-off Clamp as per RESPO Norms

Guarding angle 65x65x6mm as per RESPO Norms

M.S angle 65x65x6mm-3000mm (for support extension bracket)

M.S channel 125x65x6mm-2500mm for extension bracket

Clamp for MS angle (Side/height extension bracket)

Clamp for MS channel (Side/height extension bracket)

11KV 'E' bracket with nut & bolt as per RESPO Norms

11KV 'F/T' bracket as per RESPO Norms

11 kV 3x185 sqmm cable jointing kit outdoor type (Make-Raychem/3M)

11 kV 3x185 sqmm cable jointing kit S/T (Make-Raychem/3M)

G.I. Barbed wire as per RESPO Norms

Nut, Bolt & Washer

Stone Pad 300x300x75 mm as per RESPO Norms

PG clamp for WEASEL conductor as per RESPO Norms

Cable route marker height*width =40"x10" and thikness=3""NOMENCLATURE - 11kV UNDERGROUND CABLE, DEPTH - ……METER"

GI pipe 100 mm dia

Cable Holding clamp as per RESPO Norms

11 kV Danger board & clamp with nut & bolt as per RESPO Norms

Red oxide paint

Allu. Paint

Stay Insulator as per RESPO Norms

ERECTION OF CONSTRUCTION OF NEW 11 KV LINE FOR SHARAUNI FEEDER FROM 33/11KV SUBSTATION, GANJARI, DIST. VARANASI.

Erection, grouting & concreting of ST pole 11 mtr long as per RESPO Norms

11 Kv 'V' type X-arm as per RESPO Norms

ACSR WEASEL conductor stringing, jumpering etc as per RESPO Norms

11 Kv disc insulator 45 KN Polymer type as per RESPO Norms

11 Kv disc fitting 45 KN Polymer type as per RESPO Norms

11 Kv pin insulator Polymer type as per RESPO Norms

11 Kv top channel 100x50x6-2240 mm as per RESPO Norms

11 Kv MS iron bracing angle 65x65x6-2700 mm as per RESPO Norms

MS Dropper channel 100*50*6mm-2200 mm as per RESPO Norms

11 kV T-off Channel as per RESPO Norms

Erecion and concreting of 11 Kv stay rod 16x1800mm as per RESPO Norms

Stay wire 7/10 SWG as per RESPO Norms

Earthing rod 20x2500 mm as per RESPO Norms

G.I wire 5mm as per RESPO Norms

G.I wire 4mm as per RESPO Norms

Cross arm clamp as per RESPO Norms

Top channel clamp as per RESPO Norms

Bracing Angle clamp as per RESPO Norms

Guard angle clamp as per RESPO Norms

Stay Clamp as per RESPO Norms

Dropper channel clamp as per RESPO Norms

T-off Clamp as per RESPO Norms

Guarding angle 65x65x6mm as per RESPO Norms

M.S angle 65x65x6mm-3000mm (for support extension bracket)

M.S channel 125x65x6mm-2500mm for extension bracket

Clamp for MS angle (Side/height extension bracket)

Clamp for MS channel (Side/height extension bracket)

11KV 'E' bracket with nut & bolt as per RESPO Norms

11KV 'F/T' bracket as per RESPO Norms

G.I. Barbed wire as per RESPO Norms

Nut, Bolt & Washer as per RESPO Norms

Stone pad 300x300x75 mm as per RESPO Norms

PG clamp as per RESPO Norms

Cable route marker height*width =40"x10" and thikness=3""NOMENCLATURE - 11kV UNDERGROUND CABLE,DEPTH - ……METER"

GI pipe 100 mm dia

Cable Holding clamp as per RESPO Norms

11 kV Danger board & clamp with nut & bolt as per RESPO Norms

Red oxide paint

Allu. Paint

Stay Insulator as per RESPO Norms

Digging & making of 680mm wide, 1200mm deep size cable trench by providing fine red sand, 1st class bricks & 75mm thick saparate stone slab for each 11 kV 3*185 sqmm XLPE cable (All required materials like fine red sands, 1st class bricks & 75mm thick stone slab etc will be provided by contractor)

Laying & dressing of 11 kV,3*185 sqmm underground cable with double circuit configuration in the trench 680mm wide, 1000mm deep size trench providing 150mm fine red sand, cushion beneath and 150 mm fine red sand cushion above the cable andplace three layers 1st class bricks between the cables and edge of both cable. The cable shall be duly protected by 1st class bricks, fine red sand & 75mm thick saparate stone slab for each cable.(All required materials likes fine red sand, 1st bricks & 75mm thick stone slab etc. will be provided by contractor)

Fixing & jointing of 11 Kv 3x185 sqmm XLPE cable Outdoor jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Fixing & jointing of 11 Kv 3x185 sqmm XLPE cable straight through jointing kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work (All required materials will be provided by contractor)

Hosting of 11 kV,3*185 sqmmXLPE cable with 100 mm Dia, 3.5 mtr long GI Pipe on the double pole cable before mounting the cable on the double pole, lifting, mounting and clamping of 11 kV cable boxes on the double pole structure and making connection

Tree branch cutting

Cartage charges of 11 kv 3x185 Sqmm XLPE cable

Cartage charges of all other material