864/WS-25/2020-21

Amount

Disconnecting the electrical connections of motor, water supply to the Pump and taking out pump after disconnecting both motor and pump mechanically 125HP/100HP capacity installed at Pump Houses at BB Cantt and transporting the same to an authorized workshop for following repairs:- Dismantling the complete pump carefully, taking out all impellers, impeller housings, bush bearings, shaft with keys, shaft sleeves with nuts, coupling set, gland and gland packing, eye of impeller, water thrower, suction and delivery covers etc all as directed by Engineer-in-Charge and recommended by the manufacturer. After repairs the pump set is to be brought back at Pump house and installed, coupled with motor. All electrical, water and mechanical connections to be re-done all as directed. Note: All spares to be replaced shall be measured and paid separately under respective items.

Bush bearing made out of bronze for Srl Item No 1 above

Shaft sleeve with nuts made out of stainless steel 410 grade for Srl Item No 1 above

Re-metaling of shaft by using brass material for srl item No.1 above

Set of pins and Gaskets made out of Mild Steel for Srl Item No 1 above

Coupling set made out of Cast Iron including bolts, nuts, washers & rubber bushes for Srl Item No 1 above

Gland box made out of Cast Iron including gland box studs with nuts and washers for Srl Item No 1 above

S & F eye of impeller for Srl item No 1 above

Metal (bronze) filling in the worn out portion of impellers, turning and grinding the metal filled portions. Balancing the impeller by means of precision lathe machine for Srl Item No 1 above

Disconnecting the electrical connections of motor, water supply to the Pump and taking out pump after disconnecting both motor and pump mechanically 40HP/30HP capacity installed at Pump Houses at BB Cantt and transporting the same to an authorized workshop for following repairs:- Dismantling the complete pump carefully, taking out all impellers, impeller housings, bush bearings, oil rings, shaft with keys, shaft sleeves with nuts, balancing valve, com seating bush, neck rings and bushes, coupling set, gland and gland packing, logging ring, oil filter plug, water thrower, suction and delivery covers etc all as directed by Engineer-in-Charge and recommended by the manufacturer. After repairs the pump set is to be brought back at Pump house and installed, coupled with motor. All electrical, water and mechanical connections to be re-done all as directed. Note: All spares to be replaced shall be measured and paid separately under respective items.

Bush bearing made out of bronze for Srl Item No 10 above

Shaft sleeve with nuts made out of stainless steel 410 grade for Srl Item No 10 above

Re-metaling of shaft by using brass material for srl item No.10above

Set of pins and Gaskets made out of Mild Steel for Srl Item No 10 above

Coupling set made out of Cast Iron including bolts, nuts, washers & rubber bushes for Srl Item No 10 above

Gland box made out of Cast Iron including gland box studs with nuts and washers for Srl Item No 10 above

S & F eye of impeller for Srl item No 10 above

Metal (bronze) filling in the worn out portion of impellers, turning and grinding the metal filled portions. Balancing the impeller by means of precision lathe machine for Srl Item No10 above

Disconnecting the electrical connections of motor, water supply to the Pump and taking out pump after disconnecting both motor and pump mechanically 20HP/12.5HP capacity installed at Pump Houses at BB Cantt and transporting the same to an authorized workshop for following repairs:- Dismantling the complete pump carefully, taking out all impellers, impeller housings, bush bearings, oil rings, shaft with keys, shaft sleeves with nuts, balancing valve, com seating bush, neck rings and bushes, coupling set, gland and gland packing, logging ring, oil filter plug, water thrower, suction and delivery covers etc all as directed by Engineer-in-Charge and recommended by the manufacturer. After repairs the pump set is to be brought back at Pump house and installed, coupled with motor. All electrical, water and mechanical connections to be re-done all as directed. Note: All spares to be replaced shall be measured and paid separately under respective items.

Bush bearing made out of bronze for Srl Item No 19 above

Shaft sleeve with nuts made out of stainless steel 410 grade for Srl Item No 19 above

Re-metaling of shaft by using brass material for srl item No.19 above

Set of pins and Gaskets made out of Mild Steel for Srl Item No 19 above

Coupling set made out of Cast Iron including bolts, nuts, washers & rubber bushes for Srl Item No 19 above

Gland box made out of Cast Iron including gland box studs with nuts and washers for Srl Item No 19 above

S & F eye of impeller for Srl item No 19 above

Metal (bronze) filling in the worn out portion of impellers, turning and grinding the metal filled portions. Balancing the impeller by means of precision lathe machine for Srl Item No 19 above

M&L for disconnecting the electrical and mechanical connections of motor, and taking out motor for rewinding of centrifugal pump set/non clogging sewage type submersible electric motor by taking out burnt copper winding from the electric motor and rewinding the motor with insulated copper wire as per exisitng gauge & turns including heat/fire proof sleeve, varnishing, heating complete and refixing the motor with existing position including testing and commissioning complete all as specified and directed for the following capacities:- Note (i) The required transportation, Crane and tools shall be arranged by the contractor and cost shall be deemed to be included in the quoted rate. (ii) If any damage occured during repair/testing of pumpset then the responsibility lies with the contractor for rectification without any extra cost. a) 120 HP

M&L for taking out submersible pump set 60/35HP capacity with 100mm/80mm dia MS coloumn pipes from the bore well of depth upto 100 metres for carrying out repairs and lowering the same in position with new rubber washers, nut and bolts suitable for MS coloumn pipe 100mm/80mm dia after carrying out the repairs including testing and commissioning complete all as specified and directed. Note (i) The required transportation, Crane and tools shall be arranged by the contractor and cost shall be deemed to be included in the quoted rate. (ii) If any damage occured during repair/testing of pumpset then the responsibility lies with the contractor for rectification without any extra cost.

M&L for rewinding of submersible electric motor by taking out burnt copper winding from the electric motor and rewinding the motor with insulated copper wire as per exisitng gauge & turns including heat/fire proof sleeve, varnishing, heating complete and refixing the motor with existing position including testing and commissioning complete all as specified and directed for the following capacities. Note (i) The required transportation, Crane and tools shall be arranged by the contractor and cost shall be deemed to be included in the quoted rate. (ii) If any damage occured during repair/testing of pumpset then the responsibility lies with the contractor for rectification without any extra cost. a) 60 HP

Supply and fixing following spares suitable for submersible pump set 35 HP including taking down unserviceable spares complete all as specified and directed. (a) Stainless steel pump shaft

(b) Gun metal pump drive end bush

(c) Gun metal impeller

(d) Stainless steel bush for coupling of motor and pump

Supply and fixing following spares suitable for submersible pump set 60 HP including taking down unserviceable spares complete all as specified and directed. (a) Gun metal impeller

(b) Stainless steel bush for coupling of motor and pump

S&F of bearing No. 3309 including taking down unserviceable bearing complete all as specified and directed.

All as per srl item No. 46 here-in-before but of bearing No. 6313

All as per srl item No. 46 here-in-before but of bearing No. 6309

All as per srl item No. 46 here-in-before but of bearing No. 6308

All as per srl item No. 46 here-in-before but of bearing No. 6306

All as per srl item No. 46 here-in-before but of bearing No. NU/NDE 316

All as per srl item No. 46 here-in-before but of bearing No. NU/NDE 317 Make for item srl No : 46 to 52 - Tata/SKF

S&F of rubber coupling TC 17/16 (ISI marked) including taking down unserviceable rubber coupling complete all as specified and directed.

All as per srl item No.53 here-in-before but of rubber coupling TC 15/14

All as per srl item No. 53 here-in-before but of rubber coupling TC 13

All as per srl item No. 53 here-in-before but of rubber coupling TC 11

S&F gland packing of size 8 mm (ISI marked) including taking down unserviceable gland packing complete all as specified and directed.

S&F gland packing of size 10 mm (ISI marked) including taking down unserviceable gland packing complete all as specified and directed.

S&F gland packing of size 12 mm (ISI marked) including taking down unserviceable gland packing complete all as specified and directed.

S&F manually operated oil immersed star delta motor starter, 150 HP, three phase with double contact strip wound overload coil and cable entry box including taking down unserviceable starter complete all as specified and directed

Supply, install, testing and commissioning fully automatic star delta starter with M-5 contactor type, pneumatic timers, overload relay of range 84.6-135 A and having contactor rating 110A suitable for 100HP/125HP centrifugal pumpset including complete cabling for motors complete all as specified and directed.

All as per srl item No. 60 here-in-before but of 40/30 HP

All as per srl item No. 60 here-in-before but of 10/12.5/ 20 HP

Supply and fixing DOL starter upto 5 HP including taking down unserviceable starter complete all as specified and directed. Make for item srl No 60 to 64: SKN/BCH/MDS

Supply and fixing single phase preventor including taking down unserviceable single phase preventor complete all as specified and as directed by Engr-in-Charge. Make : Minilec/Siemens/SKN

Supply and filling of starter oil for oil immersed starter including draining out the old unserviceable oil complete all as specified and dlirected Make - SKN/Castrol/Poweroil

Supply and filling of bearing grease suitable for pumpset complete all as specified and directed. Make : Castrol/HP/Servo

Supply and fixing pressure booster pump 0.5 HP, Head range 35 - 6M, discharge range 900-4200LPH, 230V including taking down unserviceable pressure booster pump complete all as specified and directed. Make : Crompton greaves/Kirloskar/KSB

Supply and laying PVC insulated, water proof cable PVC sheathed, Multistranded copper conductor 1100V, 3 core, 25 sqmm flat cable including taking down unserviceable cable complete all as specified and directed.

S&F single core PVC insulated round sheathed copper conductor cabe (FRLS) of size 25 sqmm drawn through suitable flexible PVC pipe including all fixing accessories and taking down unserviceable cable complete all as specified and directed.

S&F single core PVC insulated round sheathed copper conductor cabe (FRLS) of size 70 sqmm drawn through suitable flexible PVC pipe including all fixing accessories and taking down unserviceable cable complete all as specified and directed. Make for item srl No 69 to 71: Havells/Finolex/Polycab

S&F servo control PCB suitable for 500/250/100/50 KVA servo voltage stabilizer, 3 phase including taking down unserviceable servo control PCB complete all as specified and directed.

S&F control transformer suitable for 500/250/100/50 KVA servo voltage stabilizer, 3 phase including taking down unserviceable control transformer complete all as specified and directed.

S&F Digital voltmeter 0-500V including taking down unserviceable voltmeter complete all as specified and directed.

S&F Digital ampere meter 0-200A including taking down unserviceable ampere meter complete all as specified and directed.

Supply and filling servo stabilizer oil grade IS : 335 - 1993 including taking down unserviceable oil complete all as specified and directed.

S&F copper wound coil assembly suitable for 50 KVA servo voltage stabilizer, 3 phase with input voltage 90V - 250V including taking down unserviceable coil assembly complete all as specified and directed.

S&F copper made core assembly suitable for 50 KVA servo voltage stabilizer, 3 phase with input voltage 90V - 250V including taking down unserviceable core assembly complete all as specified and directed. Make for srl item No 35 to 41 : Vinitec/Alba/Powerware Note for srl item No 72 to 78: (i) The required transportation and Crane & tools for lifting of servo voltage stabilizer shall be arranged by the contractor and cost shall be deemed to be included in the quoted rate. (ii) If any damage occured during repair/testing of servo voltage stabilizer then the responsibility lies with the contractor for rectification without any extra cost.

Supply and laying GI water tubing 150mm bore with screwed socket joints, medium grade galvanised including all fittings, such as sockets, bends, elbows, unions, tees laid in trenches and taking out unserviceable tube complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 79 above but of 80 mm bore complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 79 above but of 50 mm bore complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 79 above but of 40 mm bore complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 79 above but of 25 mm bore complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 79 above but of 20 mm bore complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 79 above but of 15 mm bore complete all as specified and as directed by Engr-in-Charge. Make for item srl No 79 to 85 : Tata/Jindal/Prakash surya

M&L for servicing of RO plant 50 LPH by replacement of new sediment filter, granular activated carbon filter, RO membrane, UF membrane, Post carbon including taking out unserviceable filters complete all as directed by Engr-in-Charge.

M&L for servicing of RO plant 75 LPH by replacement of new sediment filter, granular activated carbon filter, RO membrane, UF membrane, Post carbon including taking out unserviceable filters complete all as directed by Engr-in-Charge.

M&L for servicing of RO plant 100 LPH by replacement of new sediment filter, granular activated carbon filter, RO membrane, UF membrane, Post carbon including taking out unserviceable filters complete all as directed by Engr-in-Charge.

M&L for servicing of RO plant 500 LPH by replacement of new sediment filter, granular activated carbon filter, RO membrane, UF membrane, Post carbon including taking out unserviceable filters complete all as directed by Engr-in-Charge. Make for item srl No 86 to 89 : Aquafresh/Renuka water technologies

Supply and filling of filter media (carbon and sand) for RO plant including taking out unserviceable filter media complete all as specified and as directed by Engr-in-Charge.

Supply and fixing motor capacity 300 GPD suitable for RO plant 100 LPH and taking out unserviceable motor complete all as specified and as directed by Engr-in-Charge.

Supply and fixing solenoid valve including taking down unserviceable solenoid valve complete all as directed by Engr-in-Charge.

Supply and fixing TDS switch including taking down unserviceable TDS switch complete all as directed by Engr-in-Charge.

Supply and fixing sluice valve short body type of cast iron both ends flanged with rubber insertion and drilled of size 150 mm dia and IS 14846 with pressure rating of PN 1.6 with brass/copper alloy spindle and iron wheel head with nuts, bolts and washers of suitable size complete all as specified including taking down old unserviceable sluice valve complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 94 above but of 100 mm dia complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 94 above but of 80 mm dia complete all as specified and as directed by Engr-in-Charge.

Supply and fixing cast Iron Non return valve, short body type, flanged ends heavy duty as per IS 5312, PN 1.6 of size 150 mm dia including 6mm thick rubber insertion ring and taking down old unserviceable non return valve complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 97 above but of 100 mm dia complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 97 above but of 80 mm dia complete all as specified and as directed by Engr-in-Charge. Make for item srl No 94 to 99: Kirloskar/Sant/Leader

M&L for Brass/Gun metal, globe or gate valves of size 50 mm bore dia with all GI fittings, iron wheel head,screwed both ends for iron pipe and fixed including taking down unserviceable gate valve complete all as directed by Engr-in-Charge.

All as per the description of item srl No 100 above but of 40 mm dia complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 100 above but of 25 mm dia complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 100 above but of 20 mm dia complete all as specified and as directed by Engr-in-Charge.

All as per the description of item srl No 100 above but of 15 mm dia complete all as specified and as directed by Engr-in-Charge. Make for item srl No 100 to 104 : Zoloto/leader/Sant

Lagging to 20/25 mm bore pipes used in external water supply or plumbing all round with 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 kg/cum conforming to IS 9842, provided with chicken mesh netting 25 gauge 20 mm mesh binding wire and reinforcement with plaster of paris complete all as specified and directed.

M&L for Cutting the road /hard standing to a size not exceeding 70 cm in width and not exceeding 90 cm in depth for laying / removal of MS/CI/GI pipe including making good so as to match with existing finishing with PCC (1:4:8) type D2 (using 40mm grade stone aggregate) for 100mm thick on top including fair finishing with black paint complete all as specified and directed.

M&L for taking out water sample in clean container from borewell and Jhelum water and getting the same tested from the Govt approved laboratory for bacteriological and chemical test complete all as specified and directed.

M & L for taking out and jointing of CI/GI spigot and socketed pipe of dia 200mm by filling lead wool in joint, making the same and testing complete all as specified and directed.

All as per description of Srl No. 108 above but of dia 150mm complete all as specified and directed.

All as per description of Srl No.108 above but of dia 100mm complete all as specified and directed.

M&L for Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of pipe line and getting out in hard/dense soil complete all as specified and directed.

M&L for Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil complete all as specified and directed.

M&L for Removing excavated material in soils exc.500m and deposting where directed at a level n exc.1.5m above the starting point complete all as specified and directed.

Supply and fixing fire hydrant valve, single headed including required washer and fittings complete and taking down unserviceable fire hydrant valve complete all as specified and directed. Make : Zoloto/Kirloskar/L&T

Supply and fixing in repair GI Elbow 15mm dia screwed both ends for iron pipe and fixed including taking down unserviceable elbow complete all as specified and directed.

All as per srl item No 115 here-in-before but elbow 20mm dia

All as per srl item No 115 here-in-before but elbow 25mm dia

All as per srl item No 115 here-in-before but elbow 40mm dia

All as per srl item No 115 here-in-before but elbow 50mm dia

All as per srl item No 115 here-in-before but elbow 80mm dia

All as per srl item No 115 here-in-before but elbow 100mm dia

Supply and fixing in repair GI Tee 15mm dia screwed both ends for iron pipe and fixed including taking down unserviceable tee complete all as specified and directed.

All as per srl item No 122 here-in-before but Tee 20mm dia

All as per srl item No 122 here-in-before but Tee 25mm dia

All as per srl item No 122 here-in-before but Tee 40mm dia

All as per srl item No 122 here-in-before but Tee 50mm dia

All as per srl item No 122 here-in-before but Tee 80mm dia

Supply and fixing in repair GI Union 15mm dia screwed both ends for iron pipe and fixed including taking down unserviceable union complete all as specified and directed.

All as per srl item No 128 here-in-before but Union 20mm dia

All as per srl item No 128 here-in-before but Union 25mm dia

All as per srl item No 128 here-in-before but Union 40mm dia

All as per srl item No 128 here-in-before but Union 50mm dia

All as per srl item No 128 here-in-before but Union 80mm dia

All as per srl item No 128 here-in-before but Union 100mm dia

Supply and fixing in repair GI Socket 15mm dia screwed both ends for iron pipe and fixed including taking down unserviceable socket complete all as specified and directed.

All as per srl item No 135 here-in-before but Socket 20mm dia

All as per srl item No 135 here-in-before but Socket 25mm dia

All as per srl item No 135 here-in-before but Socket 40mm dia

All as per srl item No 135 here-in-before but Socket 50mm dia

All as per srl item No 135 here-in-before but Socket 80mm dia

All as per srl item No 135 here-in-before but Socket 100mm dia

Supply and fixing in repair GI Nipple 15mm dia screwed both ends for iron pipe and fixed including taking down unserviceable nipple complete all as specified and directed.

All as per srl item No 142 here-in-before but Nipple 20mm dia

All as per srl item No 142 here-in-before but Nipple 25mm dia

All as per srl item No 142 here-in-before but Nipple 40mm dia

All as per srl item No 142 here-in-before but Nipple 50mm dia

All as per srl item No 142 here-in-before but Nipple 80mm dia

All as per srl item No 142 here-in-before but Nipple 100mm dia

All as per srl item No 142 here-in-before but Nipple 150mm dia Make for Item Srl No 115 to 149 : Unik/Link/New

Material and labour for Cleaning of RCC Over Head Reservoirs/UG & Semiunderground Sumps/Jack wells/Filter beds/clarifier for the following capacity as described below :- (a) Before start the cleaning of RCC Over Head Reservoirs/UG & SUG Sumps/Jack wells/Filter beds/clariflocculator are to be disconnected from all inlets/outlets of pipeline and plug with suitable fitting. After cleaning, pluged line should be washed out and connected to the all inlets/outlets of pipe line as per existing position. (b) The inner surface of the walls and ceiling of the tank shall be cleaned with high pressure jet pump after emptying the water in the tank (c) After thorough cleaning of the tank, the cleaning water and sludge is to be removed by using pump and the sludge has to be disposed off at a place as directed. (d) After removing the sludge from tank the tank shall be cleaned thoroughly by using high pressure water pump first and again the floor and inner surfaces of the tank shall be cleaned by using a industrial vaccum cleaner and the tank shall be made fully dirt free. (e) After made the tank dirt free, the inner surfaces of walls and ceiling of the tank shall be treated with anti bacterial agents. (f) After the treatment as mentioned at (e) above, the inner surfaces of walls and ceiling shall be treated with UV Radiator. (g) After complete treatment, writing of "Tank capacity" 'Date of cleaning and due date of cleaning' on wall including applying two coats of white washing to external surfaces complete all as specified and directed. Semi underground drinking water sump 50000 gallon capacity at Batwara Water Point.

All as per srl item No 150 here-in-before but Underground/semi underground drinking water sump 10000 gallon capacity at Batwara Water Point.

All as per srl item No 150 here-in-before but Semi underground jack well of 2.75 m dia and 8.21 m deep and another size of 1.50 m dia and 9 m at Batwara Water Point

All as per srl item No 150 here-in-before but Clariflocculator plant 1.5 lakh gallon capacity at Batwara Water Point

All as per srl item No 150 here-in-before but Overhead drinking water reservoir 40000 gallon capacity at 216 Transit Camp

All as per srl item No 150 here-in-before but Overhead drinking water reservoir 50000 gallon capacity at 216 Transit Camp Note for item srl No 150 to 155 : The unit rate quoted deemed to be included draining of water with mechanical equipment and working in water and mud etc. (ii) The rate quoted by contractor deemed to be included all safety precautions which shall be taken while working on RCC Over Head Reservoirs/UG & Semiunderground Sumps/Jack wells/Filter beds/clariflocculator plant and the contractor or his Engineer shall be available during execution of the job. (iii) Lighting arrangements if required to be provided by the contractor temporarily at his own arrangements and the amount quoted for that is deemed to be inclusive in the unit rate and electricity / diesel shall not be provided by the Department. (iv) Contractor will not be allowed more than one day to do the work inside the each tank to prevent interruption of water supply to the users.

M/S ASHRAF CONSTRUCTIONS