REPAIRS MAINT OF JOINERY AND PLUMBING WORK AND TILING WORK AT OLD NAVY NAGAR AND REPAIRS MAINT OF EXTERNAL PLASTER AND FINISHING AND PLUMBING WORK AT OLD NAVY NAGAR COLABA MUMBAI UNDER GE NW NAVY NAGAR

Amount

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Material and labour for 15 mm thick plastering in two coats (10 mm thick backing coat in CM 1:4 and 5 mm thick setting coat in CM 1:4 mixed) with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: 1. WPC shall be measured and paid separately. 2. Work shall be carried out upto G+6 storey bldg. Rate including scaffolding & Safety Net Cloth at places.

Supply only integral water proofing compound complete all as specified and directed.(ISI Mark)

Material and labour for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior paint over a coat of primer & bio wash on walls. Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places complete all as specified and directed.

Taking up or down steel water tubing and connection including cleaning for refixing or removal to store of 15mm bore complete all as specified and directed

All as per item No 5 above but of 20 bore complete all as specified and directed

Material and labour for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade concealed complete all as specified and directed

All as per item No 7 above but except GI Tubbing 15 mm complete all as specified and directed.

Supply and fix fixed in repairs shower rose of PTMT any colour for fixing with 195mm long with bend of 45 degree with flange of PTMT (Minimum wt 80 gms) complete all as specified and directed

Supply and fix syphonic action PVC low level flushing cistern of 10 ltr capacity including internal fittings, brackets,32mm flush pipe complete all as specified and directed

Supply and fixed in repairs wash basin (550X400mm) vitreous china including cutting for holes pinking in ends of brackets for erecting stand incl waste pipe and waste coupling complete all as specified and directed

Supply & fixed in repairs chromium plated Pillar tpas with capstan head screwed down high pressure with or without lettered 'Hot' or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed

Supply & fixing bib taps caste copper alloy screwed down high pressure 15mm bore fixed to pipe complete all as specified and directed

Supply and fixing stop valves cast copper alloy screwed down high pressure fixed to pipe of 15mm bore complete all as specified and directed

Supply & fixing in Repairs ball brass valve polythene float of 20mm bore complete all as specified and directed

Supply and fix PVC Connection 15mm size with PTMT nuts of Length 450mm complete all as specified and directed.

Supply and fix grating around 140mm size of PTMT (minimum wt 50 gms) complete all as specified and directed

Demolition of cement concrete un reinforced in ground floor n. exc 15cm thick (below or above GL) complete all as specified and directed.

Material and labour for PCC 75mm thick (1:3:6) type C1 using 20mm graded stone agg as in plinth protection and paving complete all as specified and directed

Material and labour for preparing old plastered surfaces of walls and applying two coats of Acrylic base paint exterior grade (100% Acrylic) over one coat of primer including bio washing complete all as specified and directed.Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Removal of existing water proofing treatment of the roof, cleaning with wire brushes etc including demolition of PCC padding of any description and in any position complete all as specified and directed. Note :- Work to be carried out above 14th floor.

Material and labour for brushing neat cement slurry with 3.0 kg of cement per Sqm on cleaned and washed concrete surfaces and like complete all as specified and directed

Material and labour for Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs, or mud stops, levelling coarse of roof, rounded of chamfered on edge, average thickness not exceeding 75mm complete all as specified and directed. The work is to be carried out above 6 th floor of existing bldg.Note: Work shall be carried out upto G+6 storey bldg. Note :- Rate incl scaffolding & Safety Net Cloth at places.

Material and labour for 10mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces using WPC of approved make complete all as specified and directed. Note :- WPC shall be measured seprately.

Material and labour for applying APP (Atactic poly propylene) bitumen membrane 4mm thick APP modified weight not less than 3.5 Kg/Sqm reinforced with non woven polyester fibre of weight 160 gms/sqm as center core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer 0.25Kg/Sqm over roof ( An overlap of 100mm & 150mm shall be provided on sides and ends respectively ) all as per manufacturers instructions complete all as specified and directed.

Material and labour for cutting grooves 75mm wide & 65 mm deep in brick wall / RCC surfaces at any location shaping horizontal face with mechanical cutter and grooves filled with PCC 1:2:4 type B-0 (using 12.4mm graded stone aggregate) mixed with chemical compound SUPER LATEX OR DR FIXIT OF PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD mixed with proportion 200 ml per 50 Kgs cement as per manufacturers instruction complete all as specified and directed

Material and labour for -cement concrete tiles 200mmx200mmx20mm thick, machine pressed; set, jointed in neat cement slurry with grey cement and no pigment & pointed with epoxy mortar of width 3 mm joint in floors, and cut & polished over 10mm thick cement screed bed in CM 1:3 complete all as specified and directed

Water proofing treatment to rain water spouts of entire roof terrace by opening of all the existing Failed loose pipes and its Joint (In Old Structure), replacing the same by an appropriate dia pipe( not less then110mm) followed by Application of two coats of cold modified bituminous ensure leakage free joint complete all as specified and directed.Note :-work includes filling of mortar and making good the same.

Material and labour for Sand Face polymer modified Plaster in patches (25 mm thick) in C.M. ratio 1:4 in two coats, backing coat 15 mm thick over 10 mm thick finishing coat plaster including Drip mould/ Bands / Pattas etc. complete as per the instructions and as per our standard technical specification manual complete all as specified and directed. Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Material and labour for Preparation of old painted surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint,over a coat of red oxide primer complete all as specified and directed

Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia complete all as specified and directed. Inclusive of scaffolding of any hight complete all as specified and directed. Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Supply and fix CI soil/ waste/ vent pipe s in any length with ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed. Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Supply and fix cast iron sand cast pipes , of 75 mm dia in any length fixed with flate iron clamp complete on walls complete all as specified and directed. Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

Fixing only CI sand cast pipe 100 0r 75 mm bore duly cleaned, obtained from taking down complete all as specified and directed.

Supply and fix CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminshing pieces or tapers on walls complete all as specified and directed

Supply and fix CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) wirh parallel branches for 100mm bore pipe complete all as specified and directed

Taking down AC rain water pipe any size or pattern incl all fittings heads, shoes, bends, swan necks, including cleaning for refixing or removing to stone. Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places complete all as specified and directed.

Supply and fix PVC (SWR) 110 mm bore pipes single socketed, in any lengths with rubber ring joints, fixed to wall with acess door complete all as specified and directed. Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places complete all as specified and directed.

Supply and fix 110 mm bore PVC (SWR) bends of any redius with acess door complete all as specified and directed. Note for item No 1 to 40 :- work to be carried out above 6 th floor and scaffolding/safetynet considered in schedule items.

Demolition of brick work built in cement mortar including coping complete all as specified and directed.

Material and labour brick work with subclass B brick straight or curved on plan exc. 6m mean radius , built in cement mortar 1:4 complete all as specified and directed.

All as per Item no 42 above but except bricks complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including cutting of reinforcement cut as required to facilitate demolition including removing of debris out side MD land. (Reinforcement cut as reqd to facilitate to demotion) Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places complete all as specified and directed.

Dismantling of Plain or corrugated FRP /Steel chajja any Guage thickness including all fittings and removal from MD land complete all as complete all as directed by Engr In Charge Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places complete all as specified and directed.

Supply and fix Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

All as per item No 46 above but except sheeting( any thickness).

Material and labour for providing and applying jacketting around columns/beams ,Wall with micro concrete (Molith-MC) M-40 including all lifts, shuttering , drilling holes and fixing shear anchor as per specification complete. (Note : (a) Reinforcement shall be measured and paid seprately (b) Rates including jacketing, formwork and micro concrete) Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places complete all as specified and directed.

Material and labour for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions Note: Work shall be carried out upto G+6 storey bldg. Rate incl scaffolding & Safety Net Cloth at places complete all as specified and directed.

Material and labour for replacement of steel reinforcement with TMT bars of appropriate size where 20 % of cross section is reduced including dismantling of rusted steel including application of rust convertor FEOVERT and applying protective coating IPNET - R B complete all as specified and as directed

All as per item No. 50 above but 6mm dia and 8 mm dia upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

Material and labour applying two coat of oil bound emulsion distemper on old decorated surfaces including preparation of surface complete all as specified and directed

Material and labour applying one coats of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth complete all as specified and directed

Removing demolished materials outside MD land to a distance exc 5Km but n exc 20Km complete all as specified and directed

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed

Material and labour for 2nd class hard wood (sal wood), plain filleting square wrought, fixed with screws etc of cross sectional area exceeding 13 Sqcm and not exceeding 25 Sqcm complete all as specified and directed

Supply and fix second class hard wood factory made 35mm thick shutter partially glazed and partly panelled (e.g glazed or skelton type at upper portion and panelled type at lower portion), upper portion open rebated and prepared to received glass, gauze etc (without sash bars), bottom panel of 9mm to 12mm thick BWP commercial ply edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of memebers of shutters shall be as specified in SSR Part I section 8.20 (a) complete all as specified and directed

Supply and fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width ofaperture 1.18mm complete all as specified and directed

Material and labour for preparation on surfaces of wood and wood based surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Supply and fix 100mm size stainless steel butt hinges ISI marked. Make :- Garg or equivalent as approved complete all as specified and directed

Supply and fix 150 mm long aluminum anodized barrel tower bolt of extruded section ISI marked complete all as specified and directed. Make :- Classic/Shalimar/Marco as approved

Supply and fix 250mm long aluminum anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections, ISI marked complete all as specified and directed. Make :- Classic/Shalimar/Marco as approved

Supply and fix 150mm long aluminum anodized handle cast extruded type ISI marked complete all as specified and directed. Make :- Classic/Shalimar/Marco as approved

S& F mild steel helical door spring 300mm long ordinary rat tail rod pattern spring including roller and roller plate and riveted and welding to existing angle iron chowkats complete all as specified and directed

Demolition of plain cement concrete in any description and any position not otherwise provided for complete and removing debris outside MD land complete all as specified and directed

Material and labour PCC 1:2:4 type B1 ( 20 mm graded stone aggregate ) as in copings bed blocks etc including necessary formwork complete all as specified and directed

Material and labour applying three coats of white wash to wall incl preparation newly plastered surfaces complete all as specified and directed.

Material and labour PCC 1:2:4 type B1 ( 20 mm graded stone aggregate ) as in surface channels & drain in cement concrete using extra cement including forms moulds complete all as specified and directed

Dismantling wrough iron or mild steel work of any description not otherwise provided for embedded in PCC /Brick work complete all as specified and directed

Material and labour Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and directed

Material and labour applying two coats of synthetic enamel paint over a coat red oxide on steel newly surfaces over 10cm width/girth incl preparation of surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

Material and labour Vitrified Ceramic tiles (light shade) of size 600mmx600mmx10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 15 mm thick cement screed base (1:6) complete all as specified and directed. Note : The rate includes the cost of cement 15 mm thick screed bed.

Material and labour Vitrified Ceramic tiles (light shade) of size 600mmx600mmx10mm thick (square/ rectangular) polished, in vertical surfaces (dado/skirting) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10 mm thick cement plaster (1:4) complete all as specified and directed. Note : The rate includes the cost of cement 10 mm thick cement plaster.

Material and labour machine cut mirror polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : The rate includes the cost of cement screed bed

Material and labour machine cut pre-polished kota stone slab 20 to 25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note : The rate includes the cost of cement plaster.

Material and labour Non - skid coloured ceramic tiles of size 300mm x 300mm x 6 to 7 mm thick in floors over and including 20 mm thick screed bed in cement mortar 1:4 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match complete all as specified and directed. Note : Cost of 20 mm thick screed bed and epoxy grouting is included in the rate.

Material and labour glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry over and including 10 mm thick cement plaster in cment mortar 1:4 and pointed in white or colour cement to match complete all as specified and directed. Note : The rates include the cost of 10 mm thick plastering

Parmatma Enterprises

SHREE JAGDISH FURNITURE CO.

Ms Hari Deva Builders