REPAIR TO INTERLOCKING PAVER BLOCKS REPAIR REPLACEMENT OF GULLY TRAP REPAIR TO FENCING GATE COMPOUND WALL DRAIN GRATING AND REPAIR TO WOODEN/ALUMINIUM JOINERY PVC DOOR AND OTHER MISC BR WORKS AT OLD RS COLABA UNDER AGE BR II NW OF GE (NW) NAVY NAGAR

Amount

Demoliton of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge

Demoliton of brick or stone boulder masonry, built in cement mortar including all as specified and as directed by Engineer-in-Charge

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar

M&L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

M&L Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed

M&L Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 grade complete all as specified and directed

M&L Sand filling under floors or in foundations including watering and consolidation

M&L Precast chequered cement concrete tiles 30cm x 30cm x 22 to 25 mm thick with grey ecment and pigment set, jointed in neat cement slurry and pointed in coloured pigment to match the surface including 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 complete all as specified and directed

M&L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded aggregate) as coping,road side interlocking ,stops including necessary formwork complete all as specified and directed.

M&L broken stone or boulders of hard core n exc 63 mm deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M/L 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded stone aggegate as in sub base complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggegate as in floor, finished the surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal whilst the concrete is green all as directed .

Material and labour, forming construction joints of width 10mm & depth 25mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.

Material and labour, forming contraction joints (dummy joints) of width 10mm & depth 65mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.

Dismantiling of Asbestos cement (Corrugated, semicorrugated, etc.)sheets in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specified.

Dismantling mild steel work as in angles, tubular ,brackets of valley gutter of any description and in any position.

M&L and fabrication of mild steel work Fe-290 (Gde E-165 as in posts, purlins, rane gantries, rafter ,rails,wind tie nut & bolt etc and fastenings etc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc complete all as specified and directed .

S & F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work confirming to Fe-290, Gde E-165

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L Brick work built in cement mortar 1:4 using old side sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed

Taking down cement plaster of any description in any position including racking out joints, making key, scrubbing down with water etc all complete

M&L 15mm thick rendering in cement mortar(1:4) on fair face of brick work or concrte surfaces finished surface even and smooth with using extra cement complete all as specified and as directed by EIC.

M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement and using welded mesh where required all as specified including chicken wire mesh and scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- WPC to be mixed in setting coat only and shall be measured and paid separately) (Note : WPC to be mixed in setting coat only and shall be measured and paid separately) (Note : Chicken wire mesh rate including in item rate)

M&L preparation of new plastered surface and applying two coats of oil bound distemper over a coat of primer on wall

M&L preparation of new undecorated surfaces of walls, soffts & fascias of chajjas etc and applying two coats of weather proof acrylic based jpaint ( 100% Acrylic exterior grade over a coat of primer complete all as specified and directed by Engineer-in-Charge

Supply only integral water proofing compound of approved ISI make.

Dismantling of fencing wire mesh any type

Dismantling posts or struts (wood,steel or RCC) any section,in natural ground including taking out embedded portion and making good distrubed ground complete all as specified and directed

Excavation in post holes in soft loose soil (or similar holes ) each n.exc 0.50 cum,getting out,returning,filling in and ramming earth or broken rubble and removing surplus soil all as specified and directed

Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation filling mass concrete all as specified and directed

S&F mild steel work as in angle iron post and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc flat iron fillets ( for securing wire mesh etc) including all necessary drilling,bolting or riveting and welding to existing boundary wall fencing post and other similar location etc complete all as specified and directed

Supply only hot dipped galvanised mild steel PVC Coated chain link of Size 75mmx75mm, made of 4.0mm dia GI wire, including line wires, or any other approved mesh of any size and dia of GI wire complete all as specified and directed.

Fixing only hot dipped galvanised PVC Coated chain link fencing including line wires,any mesh size and type to any type of standards,rails,straining bolts etc including provision of binding wire all as specified and directed

Removing demolished materials outside MD land to a distance exc 5Km but n exc 20Km.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each all as specified and directed all as specified and directed.

All as per Item No 36 above but exc 1.5 sqm but n exc 4 sqm each all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with sovent cement, fixing in the frame at site as per specification & direction.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & direction.

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium slding window 18 to 20 mm thick over 20 mm thick screed bed in cement mortar 1:3 complete all as specified.

M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over 15 mm thick rendering in CM 1:3 complete all as specified and directed.

S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. Note: Minimum 25 micron anodisation for all aluminium sections)

M&L powder coated aluminium grill with suitable aluminium anodised frame section of ‘F’ section of size 23.4 x 15.3 x 1.4 mm thick manufactured by M/S Deco grill pattern DG-102 ( 80mm x 66mm aperture) all complete.

S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S&F 4mm thick frosted sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete.

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter aluminium wire staples complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n. exc 2 sqm

All as per Item No 47 above but exc 2 sqm

S&F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

S&F 35 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed

S&F 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S & F 25mm thick block board, grade-1 quality exterior grade commercial type fixed with screws to timber frame work of width n.exc. 25 cm in shelves or built-in cupbords, almirahs and similar work with lipping patti all complet as directed by EIC.

S&F 100 mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed.

S&F 100mm aluminium anodised barrel tower bolts of extruded section fixed in repairs complete all as specified and directed.

S&F 75mm stailess steel medium weight butt hinges complete all as specified and directed.

S&F 150 mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section fixed in repairs complete all as specified and directed.

S&F 300 mm long aluminium alloy , anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge all as specified and directed.

S&F hasp and staple safety type,mild steel, wire type, stove enamelled black including bolt to hinge plate and fixed with screws 125mm size complete all as specified and directed.

S&F 100mm size stainless steel medium weight butt hinges all as specified and directed.

M&L for two coats synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including preparation of surface complete all as specified and directed

S & F in repairs Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)or aluminium wire staples and removing old beading, complete all as specified and directed.

Supply & Fixing as in repairs aluminium serrated finish 20mm dia curtain rod of approved pattern and shade with all fittings as per site requirement such as , CP screws, rovel plug, etc. complete all as specified and directed by Engr-in-charge.

Material & Labour for docorated powder coated aluminium end block, rounded block & brackets fixed in repairs for curtain rod complete all as specifed and directed by Engr-in-Charge.

S & F 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs

S&F in repair 32 mm dia PVC flexible waste pipe of suitable length for wash hand basin or urinal complete all as specified and directed fixed in repairs

M&L for CI Nahani trap dia of outlet 75mm fixed in repairs including jointing to waste pipe in runlead fixed in cement concrete type B 1 (1:2:4).

S&F PTMT grating doom over Nahani trap and floor trap of 100mm Dia

S & F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M & L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint

S & F mild steel hold fasts, wall ties and similar small articles confirming to Fe 290 Gde E-165

M&L Providing PCC 1:3:6, type C1(20mm graded stone aggregate) for hold fasts complete all as specified.

M&L Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

M & L Coloured glazed ceramic tiles 300 x 200 x 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment over 12mm thick rendering as in backing coat in CM 1:4 all as specified and as directed.

M&L non-skid coloured Ceramic tiles 400x400x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not excceding 0.18 sqm, in floors etc, set and jointed in epoxy mortar and pointed in white of coloured cement to match including 15 mm thick screed bed in CM 1:6 all as specified.

ASHOK CONSTRUCTION

SATYANARAYAN CONSTRUCTION

Shetty Construction Co

SHRI SAI ENTERPRISES

BOB ENTERPRISES

S S ENTERPRISES

SHREE JAGDISH FURNITURE CO.

Nilesh Construction

Joy builders