DEFPROC

Active

Works

Civil Works - Water Works

SPECIAL REPAIRS TO WATER DISTRIBUTION LINE AND ALLIED WORKS AT AF STN BAGDOGRA

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

BAGDOGRA | Darjeeling, West Bengal

Amount: ₹75.7 LCloses: 10 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published13 Oct 2026
Submission Opens3 Nov 2026
Closes10 Nov 2026
Bid Opening13 Nov 2026

Tender Value

₹75.7 L

EMD Value

₹1.4 L

Closing Date

10 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

CWE (AF) BAGDOGRA

Address

Commander Works Engineers (AF) Bagdogra Bagdogra Airport (WB) Pin- 734 421 Tele 0353 - 2698308

Work Description

SPECIAL REPAIRS TO WATER DISTRIBUTION LINE AND ALLIED WORKS AT AF STN BAGDOGRA

Tender Information

Tender ID

2026_MES_793709_1

Reference Number

8705/BAG/2026-27/E8

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Item Rate

Period of Work

270 days

Location

BAGDOGRA

Source Website

Subscribe to view

Eligibility / Pre-Qualification

MES Contractor enlisted as Class C category a(ii) having deposited Standing Security of Rs 1,39,000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category.

Documents Required

10 documents required · 10 mandatory

Fee/PreQual/Technical

RequiredScanned copy of application on letter head of firm requesting for issue of tender. (.pdf)

RequiredScanned copy of cost of tender in the form of DD or BC for Rs 1000.00 in favour of GE AF BAGDOGRA. (.pdf)

RequiredScanned copy of Enlistment letter in MES, Scanned copy of GST REGISTRATION NO. (.pdf)

RequiredScanned copy of Provident Fund Code Number allotted by Employees Provident Fund Organization. (.pdf)

RequiredScanned copy of Schedule Credit duly quoted. (.pdf)

RequiredFor Un-enlisted Contractors scanned copy of docs meeting MES enlistment criteria forClass C cat a(ii (.pdf)

RequiredFor Unenlisted contractors Affidavit for No recovery outstanding in any Govt Dept. (.pdf)

RequiredScanned copy of Earnest Money Deposit for unenlisted contractors. (.pdf)

RequiredScanned copy of police verification report or valid passport for un-enlisted contractors. (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,000

Tender Fee Exemption Allowed

Yes

Tender Fee Payable To

GE (AF) BAGDOGRA

EMD Fee Amount

₹1.4 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

13 Oct 2026

Published

13 Oct 2026

Bid Opening

13 Nov 2026

Download Starts

13 Oct 2026

Download Ends

10 Nov 2026

Submission Starts

3 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (135 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	M&L for drilling of trial bore of 200 mm dia up to 200 m depth below ground level by any suitable method as per soil condition and CGWB report, through any kind of soil, boulders, rocks, etc., for a bore size of 250 x 150 mm dia, as required at site, including disposal of spoil from the site of work, complete all as specified and directed. NOTE: (i) After completion of drilling of the borehole, electric logging shall be carried out for exact selection of strata, and the same shall be measured and paid separately under relevant items of Schedule. (ii) In case the results of the borehole/strata are found unsatisfactory and the tubewell is not likely to yield the specified quantity of water, the site shall be abandoned and the Contractor shall be paid for the boring work only.	150	RM	-	-
2	M&L for development of trial bore by reaming up to 525 mm dia for 200 m depth from ground level, using any suitable method as per soil condition and CGWB report, including disposal of spoil from the site of work, complete all as specified and directed.	150	RM	-	-
3	M&L for carrying out electric logging test using suitable equipment for the borehole before sinking/lowering of pipes, filters, etc., for assessing and delineating the groundwater strata, through a Central/State Government agency or a firm approved by the Central/State Government, and submission of the report to GE for approval, complete all as specified and directed.	1	Each job	-	-
4	Supplying and assembling, including jointing, lowering and fixing in position, ERW casing pipe, fine cut, of 200 mm internal dia, 7 mm thick, conforming to IS 4270:2001 (ISI marked), including jointing of pipes by necessary electric arc welding on both sides. The pipe shall be duly painted with anti-corrosive paint suitable for drinking water purposes, complete all as specified and directed.	60	RM	-	-
5	Supplying and assembling, including jointing, lowering and fixing in position, ERW casing pipe, fine cut, of 150 mm internal dia, 6 mm thick, conforming to IS 4270:2001 (ISI marked), including jointing of pipes by necessary electric arc welding on both sides. The pipe shall be duly painted with anti-corrosive paint suitable for drinking water purposes, complete all as specified and directed.	60	RM	-	-
6	Supplying and assembling, including jointing, lowering and fixing in position, 150 mm bore low carbon galvanised (LCG) strainer, 3 m/6 m long, minimum 6 mm thick, conforming to IS 8110:2000 (ISI marked), including mild steel socket threaded and jointed by electric arc welding on both sides, complete all as specified and directed.	30	RM	-	-
7	Material and labour for packing pea gravel of 3 to 5 mm size, conforming to relevant IS requirements, of natural shape, brought directly from river bed and packed around the MS casing pipe to the entire depth up to ground level, complete all as specified and directed.	32	Cum	-	-
8	S&F MS centralising guides made out of MS flat iron 40 x 6 mm and 30 cm long, conforming to IS 2800 (Part 1):1991, complete all as specified and directed.	15	Each	-	-
9	Supply and fixing of well cap suitable for 200 mm bore housing pipe, made out of 6 mm thick steel plate, complete all as specified and directed. NOTE: After completion of the work, the well cap shall be used to keep the borewell closed until the submersible pumping set is installed.	1	Each	-	-
10	M&L for development of tube well with air compressor of suitable capacity till sand/mud-free water of potable quality is obtained and to achieve a minimum discharge capacity of 36,000 LPH/max yield, including compressor with accessories and tube, etc., to be arranged by the Contractor, complete all as specified and directed.	48	Hrs	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.31 MB

Work Item Documents

8705tenderdocuments.pdf

Tender Documents • 2.09 MB

BOQ_890135.xls

BOQ • 0.38 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

M&L for drilling of trial bore of 200 mm dia up to 200 m depth below ground level by any suitable method as per soil condition and CGWB report, through any kind of soil, boulders, rocks, etc., for a bore size of 250 x 150 mm dia, as required at site, including disposal of spoil from the site of work, complete all as specified and directed. NOTE: (i) After completion of drilling of the borehole, electric logging shall be carried out for exact selection of strata, and the same shall be measured and paid separately under relevant items of Schedule. (ii) In case the results of the borehole/strata are found unsatisfactory and the tubewell is not likely to yield the specified quantity of water, the site shall be abandoned and the Contractor shall be paid for the boring work only.

150

M&L for development of trial bore by reaming up to 525 mm dia for 200 m depth from ground level, using any suitable method as per soil condition and CGWB report, including disposal of spoil from the site of work, complete all as specified and directed.

150

M&L for carrying out electric logging test using suitable equipment for the borehole before sinking/lowering of pipes, filters, etc., for assessing and delineating the groundwater strata, through a Central/State Government agency or a firm approved by the Central/State Government, and submission of the report to GE for approval, complete all as specified and directed.

Each job

Supplying and assembling, including jointing, lowering and fixing in position, ERW casing pipe, fine cut, of 200 mm internal dia, 7 mm thick, conforming to IS 4270:2001 (ISI marked), including jointing of pipes by necessary electric arc welding on both sides. The pipe shall be duly painted with anti-corrosive paint suitable for drinking water purposes, complete all as specified and directed.

Supplying and assembling, including jointing, lowering and fixing in position, ERW casing pipe, fine cut, of 150 mm internal dia, 6 mm thick, conforming to IS 4270:2001 (ISI marked), including jointing of pipes by necessary electric arc welding on both sides. The pipe shall be duly painted with anti-corrosive paint suitable for drinking water purposes, complete all as specified and directed.

Supplying and assembling, including jointing, lowering and fixing in position, 150 mm bore low carbon galvanised (LCG) strainer, 3 m/6 m long, minimum 6 mm thick, conforming to IS 8110:2000 (ISI marked), including mild steel socket threaded and jointed by electric arc welding on both sides, complete all as specified and directed.

Material and labour for packing pea gravel of 3 to 5 mm size, conforming to relevant IS requirements, of natural shape, brought directly from river bed and packed around the MS casing pipe to the entire depth up to ground level, complete all as specified and directed.

Cum

S&F MS centralising guides made out of MS flat iron 40 x 6 mm and 30 cm long, conforming to IS 2800 (Part 1):1991, complete all as specified and directed.

Each

Supply and fixing of well cap suitable for 200 mm bore housing pipe, made out of 6 mm thick steel plate, complete all as specified and directed. NOTE: After completion of the work, the well cap shall be used to keep the borewell closed until the submersible pumping set is installed.

Each

M&L for development of tube well with air compressor of suitable capacity till sand/mud-free water of potable quality is obtained and to achieve a minimum discharge capacity of 36,000 LPH/max yield, including compressor with accessories and tube, etc., to be arranged by the Contractor, complete all as specified and directed.

Hrs