COMPREHENSIVE REPAIR AND MAINTENANCE OF ELECTRICAL INTERNAL

Amount

Taking down carefully existing copper/aluminium point wiring for light, socket or power bell complete with fittings such as switches, sockets, ceiling roses, holders, call bells & making good the disturbed surfaces of wall, matching the colour with existing surface complete all as specified and directed Note : Rate for making good shall be deemed to be included in above item rate

Taking down MCB with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces all as specified and directed by Engr-in-Charge..

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces all as specified and directed by Engr-in-Charge.

M&L for concealed Point wiring for One light, one way switch controlled by one, oneway switch with single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FLRSH) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FLRSH) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washer complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.

All as per srl item No 4 above, but for One 3 pin switch socket outlet, 5 Amp on the same board with other switches all as specified

All as per srl item No 4 above, but for One 3 pin 5 amps switch socket outlet point on independent board all as specified

All as per srl item No 4 above, but for one ceiling/exhaust fan/ Fresh Air Fan point controlled by one switch and regulator all as specified

All as per srl item No 4 above, but wiring with 2.5 Sqmm multistranded cable and earth wire with copper conductor of size 2.5 Sq mm for 15 amps all as specified

S&F in repair Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair Piano type switch single pole 1 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair socket two in one 6/5 Pin 5 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair socket two in one 6/5 Pin 15/16 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-In-Charge

Supply and fix in repair Lamp holder, PVC/Polycarbonate type complete with lamp LED 9 Watt for Batten fitting with back plate and all fittings complete all as specified and directed by Engr-In-Charge

Supply and fixing in repair LED light fitting 60 Watt 230 V AC Outdoor type with high pressure die cast aluminium housing and heat resistant complte with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 Protection complete all as specified and directed by Engr-In-Charge

Supply and fixing in repair LED light luminaire fitting as building security lights of 35 Watt having IP-65 protection, with minimum system efficency > 85% Cap 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover, incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65 protection complete all as specified and directed by Engr-In-Charge

Supply and fixing in repair for LED 9 watt Bollard integral decorative LED Bollard with Opal acrylic and IP 65 protection complete including fixing arrangement complete all as specified and as directed.

Supply & fixing in repair LED post top 40W LED made of cast aluminium spigot housing with decorative clear opel acrylic diffuser and IP 65 protection all as specified and directed by Engr-in-Charge.

Supply and fixing in repair LED flood light 70 watt 230 V AC pressure die cast housing with epoxy powder coated dark graphite grey colour finish prismatic polycarbonate cover with individual LED lenses, outdoor type with thermal management in multiple optics and equipped with IP 65 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-In-Charge

Supply and fixing in repair LED flood light 100 watt 230 V AC pressure die cast housing with epoxy powder coated dark graphite grey colour finish prismatic polycarbonate cover with individual LED lenses outdoor type with thermal management in multiple optics and equipped with IP 65 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-In-Charge

Supply and fixing in repair of 1100 V Grade heavy duty twin core flexible PVC insulated copper conductor cable of size 1.5 Sqmm for connection purpose including PVC Conduit 20 mm dia complete all as specified and directed by Engr-In-Charge.

Supply and fixing in repair of 1100 V Grade heavy duty twin core flexible PVC insulated copper conductor cable of size 2.5 Sqmm for connection purpose including PVC Conduit 20 mm dia complete all as specified and directed by Engr-In-Charge.

Supply and fixing in repair LT cable junction box, dust and water proof (IP65), out door type, made out of Polycarbonate with glass fiber re-inforced, size of box 260 x 210 x 116 mm with swiveling cover and locking clamp, pole mounting, consisting of aluminium bus bar strip 150mm x 20mm x 3mm, 4 Nos mounted on PVC insulator and provision of incoming/outgoing cables with grommets, including in built 6Amp MCB, SP, 9/10KA one No complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repair ceiling rose surface bakelite two to three terminals/plate polycarbonate isolated body all as specified

Supply and fix in repair sheet metal enclosure DB single pole and neutral for 240 volts 8 way with 200 Amps rated busbar flush/surface mounting double door all as specified and directed.

Supply and fixing in repair MCB SP 6-32amp rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed

Supply and fixing in repair MCB SPN 40 amp rating 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed

Supply and fix in repair V TPN DB 4 way suitable for 100 Amps MCCB 4 pole complete with 200 Amps rated busbar flush mounting, double door, proction class IP-30, IK08 complete all as specified.

Supply and fix in repair MCCB 100 Amps, 4 pole, 25 KA thermal and magnetic release in V TPN DB complete all as specified and directed by Engr-In-Charge.

Supply and fix in repair MCCB 160 Amps, 4 pole, 36 KA thermal and magnetic release in V TPN DB complete all as specified and directed by Engr-In-Charge.

Supply and fix in repair MCCB 250 Amps, 4 pole, 36 KA thermal and magnetic release in V TPN DB complete all as specified and directed by Engr-In-Charge.

Supply and fixing in repair PVC Blanking Plates one way with internal lock complete all as specified and directed

Material and labour for concealed sub main wiring (using colour coding such as red, black, white, green colour or as directed) with 4 Sqmm single core (03 run i.e 2 runs for main phase and neutral, 01 run for continues as earth wire) FRLSH PVC insulated unsheathed multistrand copper conductor cable drawn through and including PVC conduit 25mm dia (medium quality ISI marked), for independent circuit including all fitting arrangement i.e. PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. and including cutting of chases in wall and making good disturbed surfaces of walls as per original complete all as specified and as directed. Note :- Three runs of copper conductor cable and one run of PVC conduit including accessories shall be measured and paid as one unit (one RM length) for payment and extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate

Material and labour for concealed sub main wiring (using colour coding such as red, black, white, green colour or as directed) with 6 Sqmm single core (03 run i.e 2 runs for main phase and neutral, 01 run for continues as earth wire) FRLSH PVC insulated unsheathed multistrand copper conductor cable drawn through and including PVC conduit 25mm dia (medium quality ISI marked), for independent circuit including all fitting arrangement i.e. PVC clamp, rawl plug, screw, PVC junction box, tee, bend etc. and including cutting of chases in wall and making good disturbed surfaces of walls as per original complete all as specified and as directed. Note :- Three runs of copper conductor cable and one run of PVC conduit including accessories shall be measured and paid as one unit (one RM length) for payment and extra length of cables required for connection to MCBs/DB shall not be measured and the cost for the same shall deemed to be included in the unit rate

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth of not less than 1.5 metre below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia (8 SWG) by means of bolts, nuts and washers of the earth wire.galvanised iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 15mm dia and water pipe 20mm dia GI light grade with funnel and wire mesh, PCC chamber in cement concrete (1:2:4) type B-1 and CI cover with frame all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Notes :- (i) 20 mm dia GI pipe for watering to be provided with a socket and plug and should be 10 cms above ground level. (ii) Outer edge of earth pit will be 1 metre away from the outer edge of PCC chamber. (ii) GI wire upto DBs earth connection is included in this item. (iii) Water pipe shall be provided in slanting position

S&F in repair electronic fan step regulator suitable for 230 Volt singne phase AC supply complete all as specified.

Supply, laying, testing and commissioning in repair cable XLPE insulated screened meter PVC bedded, galvanised steel strip armoured, electric power calbes (heavy duty) 1100 volts grade with stranded aluminium conductor of size 120 sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and commissioning in repair cable XLPE insulated screened meter PVC bedded, galvanised steel strip armoured, electric power calbes (heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and commissioning in repair cable XLPE insulated screened meter PVC bedded, galvanised steel strip armoured, electric power calbes (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and commissioning in repair cable XLPE insulated screened meter PVC bedded, galvanised steel strip armoured, electric power calbes (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and commissioning in repair cable XLPE insulated screened meter PVC bedded, galvanised steel strip armoured, electric power calbes (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4.0 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and commissioning in repair cable XLPE insulated screened meter PVC bedded, galvanised steel strip armoured, electric power calbes (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 4.0 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and commissioning in repair cable XLPE insulated screened meter PVC bedded, galvanised steel strip armoured, electric power calbes (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2.0 core complete all as specified and directed by Engineer-in-Charge.

Supply, laying, testing and commissioning in repair cable XLPE insulated screened meter PVC bedded, galvanised steel strip armoured, electric power calbes (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2.0 core complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m deep in soft/loose soil for foundation/ cable etc n exc 10 Sqm on plan and n exc 1.5 Sqm in depth all as specified and directed by Engr-in-Charge

Returning, filling in including spreading levelling, watering and well ramming in layer n. exc 25 cm thick complete all as specified and directed

Removing surplus soil to a distance n. exc 50 m and depositing where directed at level n. exc 1.5 m above the starting point complete all as specified and directed

M&L sand cushioning with dry and clean locally available sand for under ground cable 8 cm before laying cable and 15 cm after laying and punned to 18 cm after laying of cable complete all as specified. (Note : Punned thickness shall be considered for payment purpose)

Supplying and laying, factory made unreinforced precast concrete cable cover LV type-1, flat, of size 250x150x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

S & F in repair for feeder pillar box out door type made out of 3 mm thick plain MS sheet of size 0.90 m x 0.45 m x 0.90 m supported on angle iron of size 40 x 40 x 6 mm including necessary PCC for grouting. The panel shall comprise of (a) 4 Nos aluminium bus bar of 300 Amp rating (b) MCCB4- pole 415 Volt, 250 Amp, ruputing capacity 10 KA-01 No (c) MCCB 3-pole 415 Volt, 160 Amp 25 KA-01 No (d) MCB SP 5-32 Amp-06 Nos all as specified and directed by Engr-in-Charge.

Dismantling of existing LT pole any size/type from foundation in necessary earth work including dismentling of concrete MS clamps nuts, bolts, earth wire, overhead lines conductor, insulators, gaurding cradles and other accessories complete all as specified and directed.

M&L in replacement for 40mm bore GI pipe light grade with all fittings and fixtures fixed to pole and laid to floor/ground for mechanical protection of cable strip all as specified and directed

Supply and fix suction pressure gauge all as specified and directed (0 -150 PSI) Make: Fiebig

Supply and fix discharge pressure gauge all as specified and directed (0-300 PSI) Make: Fiebig

Supply and fixing in repair of LED submerged Light 1 x 18 Watt (Blue colour for swimming pool) under water complete all as specified and as directed by Engineer-in-Charge

Note:- Contractor will submit all the old unserviceable item retrived from above mentioned schedule of item to MES store yard. Transportation charges for the same is responsibility of contractor and no extra payment shall be made on this account

SHIVSHAKTI ENTERPRISES (BID ID -3273422)

Bhavya Enterprises (BID ID -3277399)

Lalgarhia Enterprises (BID ID -3274162)

Soma Enterprises (BID ID -3274025)