Supply, fabrication and erection of aluminium louvers, partitioning and rectification of existing partitions at various locations of 507, 508-S, 508 and other buildings of KARP and KARP-II

Amount

Providing, fabricating and fixing in position anodized aluminium extruded sections ( minimum anodic coating of grade AC 15 ), clips etc., as specified or of equivalent weight in matt finish for aluminium doors,windows,ventilators / louvers as shown in drawing including all fixtures, fittings complete as per the instruction of Engineer-in-Charge including providing scaffolding, hinges/pivots and making provision for fixing of fittings wherever required. Note: 1.The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls 2. All joints shall be of mittered joints. 3. A long M.S.rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom horizontal members internally connecting vertical members and fixed with M.S. washers & nuts. 4. Only aluminium members alone shall be measured and paid for. In Normal area

Providing, fabricating and fixing in position anodized aluminium extruded sections( minimum anodic coating of grade AC 15 ), clips etc., as specified or of equivalent weight in matt finish for aluminium doors,windows,ventilators / louvers as shown in drawing including all fixtures, fittings complete as per the instruction of Engineer-in-Charge including providing scaffolding, hinges/pivots and making provision for fixing of fittings wherever required. Note: 1.The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls 2. All joints shall be of mittered joints. 3. A long M.S.rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom horizontal members internally connecting vertical members and fixed with M.S. washers & nuts. 4. Only aluminium members alone shall be measured and paid for. In Restricted area

Providing and fixing 12mm thick pre-laminated with decorative lamination on both sides, 3 layer medium density (Exterior grade) particle board Grade-I, Type-II confirming to IS: 12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacturer in paneling fixed in aluminium doors, window shutters and partition frames with C.P brass/stainless screws etc. complete as per the instruction of Engineer-in-Charge.

Providing and fixing of Archer/Eurobond ACP with 3mm thick aluminium composite panel for aluminium doors, windows as shown in drawing including all fixtures, fittings complete as per the instruction of Engineer-in-Charge.

Providing and fixing Aluminium die cast body tubular type universal hydraulic door closer‘Hardwyn/Everite’ make or equivalent approved make conforming to IS: 3564 latest with all other fittings complete as per specifications.

Providing and fixing glazing 5mm thick clear float glass pane in aluminium doors, window, ventilator shutters and partitions etc. with Neoprene gasket including cost of neoprene gasket complete as per the drawings and directions of the EIC.

Supplying and fixing in position ornamental aluminium anodized grill standard section of deco grill or any other approved equivalent with aluminium matt finish having grill pattern 75x75x7 mm thick for window opening fitted with aluminium channel, beading clips, etc., complete all as per specifications and as directed by the EIC.