Renovation and Interior Furnishing work at HO and Water Harvesting Renovation work at 22 Godown

Amount

DISMANTLING / REPAIR WORKS

Dismantaling/Demolishing removing existing counter's, partitions, windows, false ceiling, electrical fitting, electrical wiring , conduict switch boxes,switch sockect, fans and fixture, brick work,wall / floor tiles, flooring , toilet fittings & fixtures if required etc. to accommodate the proposed new layout including stacking of servicable material to the space provided by the employer and disposal of unserviceable material to a place permitted by the municipal authorities including making good any damages complete. No unservicable dismantalled material will be allowed to be accumulated at site. Decision of the Engineer Incharger as to what constitute servicable/unservicable material will be final and binding. The amount should include cost for carrying out any other unforseen items required for the proper execution of the work. All complete as per approval and instructions of the Engineer Incharger.

BRICK WORK

Providing and laying 230mm thick brick work above Plinth with bricks of class designation 75 in cement mortar 1:6 (1 cement : 6 coarse sand) including curing, raking of joints, all material, labour, tools & plants etc. Complete in all respects as directed by the Architect.

PLASTER

Plastering of walls in 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge incl. of hacking on column/wall, making surface wet before applying plaster and proper curing after plaster etc complete. all plaster works will have provision of chicken mesh with more than 2" overlap between RCC member and wall so as to avoid cracks due to thermal expansion, chicken mesh to be also provided on all chased surfaces such as ,conduit chasing , pipe line chasing etc. and then chased area to be replastered . Cost to be inclusive of all including scafolding at all heights. (For external works)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). for Toilet, Kitchen, Pantry counter & for Lintel of doors, strong room RCC walls, etc. in brick works

STEEL WORK

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Civil Work - WATER PROOFING

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound Conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Providing/applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg/10 sq.m. one coat of self priming cementitous waterproofing polymer (dilution with water in the ratio of 1:1) and two coaats of cementitous waterproofing polumer ( dilution with water in the ratio of 3:1) after scrapping and properly cleaning the surface to remove pre-existing paint & loose particles till plaster is visible including scaffolding etc. complete in all respect as per the direction of Engineer-in-chrage. (For Basement walls) FINISHING WORKS (Painting rates to include cost of covering/ protecting all finishing materials including switches, lighting fixtures, AC equipment etc.) (Applying painters putty & scrapping the surface and repeating the process as many times as is required to achieve a thoroughly smooth surface for partitions paneling and walls)

PUTTY

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

WOOD POLISH

Melamine polish with matt finish of required shade over doors, window shutters, jambs and soffits wooden panelling including removing and scratching the existing polish and repair works complete.

PAINTING WORK

Painting with Plastic / acrylic paint of approved brand and manufacture of required colour two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade. Make: Asian (Apcolite)/ICI Dulux (Gloss)/Nerolac (Full Glass Hard Drying) Scrapping, sand papering wooden/ metal surfaces Applying 01 coat of wood/ metal primer

GLASS PARTITION

Providing and Fixing Full height straight glass partitions using 12mm thk toughened glass inclusive of the glass surface as indicated on the drawings and as per the instructions of Engineer InchargeGlass to be fixed with SS "U" CHANNEL, concealed properly with requisite sealant within partition / MDF frame as per detail. All exposed edges of the glass shall be machine polished.All glass-to-glass joints to be sealed with pre-approved silicon sealants/ 3M tape, as required (GLASS MAKE Modiguard/Asahi float/Saint-Gobain/Asahi India) For all Glazed partitions the solid partition above and below the glazed portions, upto a max. dimension of 300 mm, shall be measured as part of the glazed partitions; if more than 300 mm, then the relevant portion, more than 300mm, shall be part of the soild partition. For solid vertical portions of the glazed partitions which would be framework and gypsum skin (s), all portions less than 600mm shall be measured as part of the glazed partitions and if more than 600mm shall be measured as part of solid partitions. Height of glazed partition - 2400mm

FULL HEIGHT GLASS door (12mm Thk ToughEened Glass door)

Providing and fixing Single/Double leaf glass door made of 12 mm thick toughened glass fixed on stainless steel fittings of required section of chrome finished,100mm high Stainless steel plate at top and bottom both side of the glass shutter as per drawing, including floor spring, patch fittings, SS top pivot, door handle, lock of approved make (sample approved by the Architect/ Client) and all necessary hardwares and fixing arrangement complete as shown in drawing and directed by Engineer Inchargemake of Fitting as approved: Kich/Ozone/Neki/Dorma. & Glass Make : Modiguard/Asahi float/ Saint-Gobain/Asahi India. with cylinderical locks and kitch handles both sides 30mm dia and 600mm long in buffed SS 304 finish. Item same as above but overall size of Glass door is 900x2100mm. GLASS PARTITION & PARTITION FALSE CEILING Quoted Rates are for all heights , scaffolding, depths, levels, leads and lifts and for all design and pattern shown in drawings Contractor to include the cost of members & all required accessories for installation compelet finished ceiling in his quoted rate Actual finished area to be measured and paid for Vendor Shall submit & get approved all type of board/Tiles /plank sample by Architect before execution.

GYPSUM BOARD CEILING

Providing and fixing suspended false ceiling in microlook , which includes providing and fixing GI perimeter channels of size 0.55mm thick having one flange of 20mm and another flange of 30mm and a web of 27mm along with perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centers. The suspending GI intermediate channels of size 45mm 0.9mm thick with two flanges of 15mm each from the soffit at 1220mm centers with ceiling angle of width 25mm x10mm x 0.55mm thick fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 457mm centers. All sections, channels, etc to be in Gypsteel make as specified by manufacturer as per shown in drawing and directed by the Architect. 12.5mm tapered edge Gypboard (conforming to IS-2095 - 1982) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centers. Screw fixing is done mechanically either Finally the boards are to be jointed and finished so as to have a flush look which includes filling as finishing the tapered and square edges of the boards with jointing compound, paper tape and two coats of primer suitable for Gypboard and three or more coats of Acrylic emulsion paint (as per recommended practices of India Gypsum or equivalent) etc. complete including opening to be made for AC grills, light fittings, trap door etc. (Plan area to be measured and paid for) (cost to include paint also) (all material including chanels etc. Make: Lafarge (Boral)Gypsum/ Saint-Gobain/ India Gypsum/USG)

Veneer Finished wooden ceiling - Wooden Veneer Ceiling

Providing & fixing Wooden veener false ceiling comprising of the following: 4mm thick veneer finish ( Duro group B) over 12mm thick commercial ply (Century/ Green/ Kitply/ Garnet) with hard wood (Beeachwood) frame of required section fixed to wall & ceiling with necessary nails & screws as required and as per drawing. Veneer Make: Duro , Commercial Ply Make: Century/ Green/ Kitply/ Garnet veneer finish wood beading all around as required. Including all necessary nails, glues, teak wood lipping, melamine polishing, wood preservative paint, fire retardant paint, brushed steel hinges for trap door shutter including making opening for lights, AC grills etc. complete as per design and drawing. (Contractor to include the cost of members & all required accessories for installation compelet in his quoted rate) (For exam head cabin and meeting room ) Same as above but with 4 mm thick veneer group B

ROLLER BLINDS

Providing & fixing roller blinds comprising of polymer coated fibre fabric with minimum openness factor of 3% as per AS standards. The fabric shall be fire retardant and have high heat reflection ratios. The roller mechanism shall be a moulded unit made from engineering grade plastic polymer with steel spring support. The fabric shall be finished on the sides with edge tape duly welded for waviness control. The fabric shall be attached to the roller tube with high quality self adhesive tape. Average width of blinds shall be 2000mm and fall of 3000mm with manual operation. Headrail: shall be .812" high x 2" deep extruded aluminum headrail with a wall thickness of 0.045” and painted to coordinate with fabric color. Cord lock: shall be a snap-in design of injection-molded thermoplastic incorporating a metal, free-floating, serrated cord-locking roller. Lift cord: shall be 1.2mm polyester and concealed for a clean appearance. A snap tassel and joiner ball connect to a single Danskord for raising and lowering the shade. Cord, tassel and joiner ball are color coordinated with fabric. Installation: Bracket shall be low profile, hidden snap-in design made of 0.025” zinc-plated spring steel. Bottomrail: shall be 0.375" high x 2" deep extruded aluminum with a wall thickness of 0.045” and painted to coordinate with fabric color. Fabrication Shades shall be fabricated according to specifications and accurate to tolerance established by SWF engineering standards Basic Cost: Rs 1500 per sm (make: Vista / Marble / Livin)

FLOORING WORK

Note :- (Quoted Rates are for all heights, depths, levels, leads and lifts and for all design and pattern shown in drawings) Stones shall be procured in slabs of varying sizes quoted rates also to include cutting of stones as per required sizes from slab. Note: Actual finished area to be measured and paid for Note :- Vendor Shall submit & get approved all type of stone/Tiles sample by Architect before execution. Make Vitrified Tiles: Granito/ Kajaria/ Restile/ Somany/Qutone/ Nitco Make Ceramic Tiles: Kajaria/Somany/Bell/Nitco/Qutone Providing and laying polished granite stone 18 mm thick in choice shade laid in floors and counter tops over 20mm (average) thick base of cement mortar 1:4 (1 cement :4 coarse sand) followed by laying and fixing with highly polymer single component adhesive of LATICRETE / BAL ENDURA or equivalent with minimum 6 mm thickness and jointed with white cement slurry mixed with matching pigment, including rubbing and polishing and curing etc. complete at all levels. (Sample of stones shall be got approved by Architect. Basic cost @Rs. 200/- per sq.ft.) item same as above in flooring, Staircase steps, landing etc. the cost shall be included with necesarry groove, joints chamfer, edge moulding, nosing etc. all complete as drawings to be provided by the architect/as per instuction of site in charge.

TILE DADO

Providing and Laying tile dado of approved make, shade and pattern as approved by Architect, with epoxy grouting ,making grooves using 2/ 3mm PVC spacers and epoxy grouted with tile groute of matching shade of tile including cutting, grouting the joints with epoxy grout of endure or equivalant and pigment to match the shade of tile including cutting, etc. complete in all respects as per pattern and drawing. With Tile (Basic rate of tiles Rs. 100/- Sft leaving taxes and freight and loading un loading charges) for Toilets walls other then higlighter

DOOR/WINDOW WORKS

Providing and fixing phenol bonded solid core flush door shutters of approved quality and make non decorative type core of block board construction with internal frame of teak wood .Door Frame: Made overall size 60 x 150 mm finished with polish finish as shown in drawing .(Steem beech wood basic cost Rs. 3500.00 per/cft ) Note:- for partition frame size - 50 x 100 or as per partitions width. Architraves of overall size 40 x 12 mm fixed to wooden frame both side as shown in drawing.(in teak wood. Ivory cost/ghana teak)Including providing & fixing of all hardware & accessaries, hinges, door handle, door closer, door stopper, lock, tower bolt, door buffer, making of grooves, providing & applying wood preservative, antitermite proof paint, polish, screws, nails, wooden studs, wooden beading, all necessary fixing arrangement etc complete as per design and drawing. all hardware to be dorma/Hettich/Ozone or equivalant Make Make for Doors & FittingsHardware / Locks : Dorma XLC, Kitch, Geze, Hettich, Dorset, Halflae Hardware : Dorset, Ingersoll Rand, Hettich, Kitch, Door Closers : Dorma , Dorset Door Locks: DORSET,Golden Door Seals: Enviroseals Veneer Doors : Same as above Description with 30-35 mm thick shutter finish with 4 mm thick veneer (Duro group B ) in both side of the shutter of approved make & shade and edge polishing / enamel painting, including 200x1800mm vision panel made of 6mm thick non toughened clear Glass with wooden frame duly polished on each shutter complete with all necessary fixing arrangement including melamine polish of desire shade complete as per shown in drawing and directed by Engineer Incharge  Each door to have 4 Nos of 6" railway barring hinges in SS finish  door shall be with the dorset heavy duty door closer with necessaryfittings. Doors to have cylindrical locks . Door to have 400mm long 30mm dia SS buff finish handles on both sides.  Basic cost of the veneer Rs.175per/sqft Item same as above but with overall size of shutter is 900 x 2100mm.

Same as Above Item sound Proof doors for Exam Head Cabin doors to be packed with glass wool inside to make a sound proof with 50 mm thick shutter finish with 4 mm thick veneer (Duro group B ) in both side of the shutter of approved make & shade and edge polishing / enamel painting, including 200x1800mm vision panel made of 6mm thick non toughened clear Glass with wooden frame duly polished on each shutter complete with all necessary fixing arrangement including melamine polish of desire shade to paid in polish item complete as per shown in drawing and directed by E.I Item same as above but with overall size of shutter is 1200 x 2100mm.(vision panels on both the shutters)

Providing & fixing of Toilet cubicle doors of overall size 750 x 2100 mm high consists of followings : Door Frame: Made overall size 60 x 150 mm finished with polish finish as shown in drawing ..(Steem beech wood basic cost Rs. 3000.00 per/cft ) Note:- for partition frame size - 50 x 100 or as per partitions width. Door made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistant 12mm thick solid compact laminate panels of approved colour/shade dully tested as per the detail drawings & as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard and manufecturer specification. This also includes providing and fixing in position necessary hardware made out of Nylon Polyamide Grade-6 as per manufacturer’s specifications & Architects instructions like Door Knob, Gravity Hinges, Thumb turn lockset indicator, Coat Hook, U-Channels, Adjustable Foot, Noise Deafening Tape, Screws & wall plugs etc. All screws will of 304 Grade in stainless steel with satin finish.Including providing & fixing of all hardware & accessaries, providing & applying wood preservative, antitermite proof paint, polish, screws, nails, wooden studs, wooden beading, all necessary fixing arrangement etc complete as per shown in drawing and directed by Engineer Incharge. Item same as above but with overall size of shutter is 900 x 2100mm.

Item same as above but with overall size of shutter is 750 x 2100mm.

WINDOWS

Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) including 40mm Slim line aluminium windows as per arch. drawing PARTITION / PANNELING WALL FINISHING WORKS : Note :- 1.G.I Frame for Partitions consisting of G.I vertical studs of size 50mm & horizontal members @ 600 x 600. 2. At all services out lets such as switch sockets, data out lets, AC grills, etc. Horz. member of adequate size and section to be provided. 3. All full ht. partitions, unless otherwise specified will go up to RCC slab, complete with insulation, Gypsum Board etc. except second skin which can be stopped at flase ceiling. Actual Area executed will be paid for. 4. All paneling framework, unless otherwise specified will go up to bottom of true ceiling except the second skin which can be stopped at false ceiling 5. All exposed wooden surfaces in this Item or anywhere else in the BOQ to have melamine polish as per approved sample 6. All wooden/mdf framework under this item or anywhere else in the BOQ to be treated with anti termite and fire retardant paint ( viper or equiv.) 7. All the wooden framework under this Item or anywhere else in the BOQ will have well seasoned wooden members of species as defined in the individual item 8. All Glass to Glass, Glass to wood and Glass to SS joints shall be sealed with Dow Corning Glass sealant with minimum contact surface to be not less than 6mm after cleaning and masking procedure with full tool & tackle .Silicon works to be got done by an approved specialized Agency. 9. All panel like, gypsum board, MDF, Ply veneer etc to be fixed to the frame with dry wall screws, jointed and finished with requisite filler, paper tape, finisher and and primer suitable for the surface. 10. The outer skin on either side shall have 10mm grooves with aluminum 'L' angle bends fixed to the thickness of board at the edges, neatly finished 11. Partitions to have extra skin of wire mesh only when specified by the client for security reasons in given areas. The same will be paid separate extra only for the wire mesh

DRY PARTITION

Providing and applying the claddings on the G.I framework erected for Solid partitions. Cladding under this section shall be considered to be applied only to one side. Cost for fixing plywood/ MDF etc. and fixing/cladding laminate/ veneer to be quoted as per case. Each side of the partition finishes will be measured as per the case. Contractor to make provision for all electrical/ networking boxes and to provide 30mm dia cut-outs as required. Electrical/ Network boxes/ other services to be provided at desired height and location as indicated in the drawing or as instructed at site All junctions between materials, columns, walls, etc to have a 6mm groove with Aluminium `L'/ 'U' sections as per details. And all grooves joint and design pattern shall be included in quoted cost. All exposed edges/ corners/ grooves to have proprietary corner/ edge bead sections/ channels as per Architect's instructions. All exposed gyp board edges to be fixed with BeadEx self adhesive. At all locations where services are penetrating the partition above false ceiling to have additional GI frame work around the duct/ cable tray/ pipe and the gaps between the frame work and service to be filled with appropriate acoustic sealant or with fire stop material as directed. Approved make : Laminates: Merino/Green Lam Veneer: Duro group B Commercial Ply: Century/ Green/ Garnet/ Alpro/Durian/ merino/ Duro SKIN TYPE-1 OVER G.I FRAMING: 6 mm PLY + 6mm PLY + 1mm Laminate one side of Partition. The PLY should be Leed certified Green Products, FSC certified and CE certification. which insure the quality of the products to the international standards.

SKIN TYPE-2 OVER G.I FRAMING : 6 mm PLY + 6mm PLY + 4mm Veneer (Duro Make ) one side of Partition. With groove, joints and design pattern as per drawing. The PLY should be Leed certified Green Products, FSC certified and CE certification. The cost is included necessary nail, screw and adhesive, melamine polish etc. all complete

Providing and Fixing designer screens with necesarry G.I framework above false ceiling to support or fix with screen with ceiling and same arrangement to made in floor. GLO Panel Screen thickness 12mm. Providing & Fixing GLO Panels On back Drop wall of meeting lounge and visitors area as per design of panel approved or given by the Architect or as mentioned in detail drawings. The quoted cost to include making arrangement for fixing the designer panel in floor and same to be fixed in ceiling with G.I support above false ceiling lvl. GLO Panel base cost - 200 Rs. Sq.Ft leaving taxes and transportation charges

TOILET MIRROR

Providing and fixing 6mm thick (of any shape & size ) fixed with 40mmx40mm hard wood frame of ivory cost teek wood section as shown in the drawing, mirror with 12 mm thick waterproof ply backing supported with 20mm thick water proof board fixed to wall with hard wood pegs including providing and fixing 300 micron HDP film as vapour barrier, all necessary fixing arrangement like nails/ screws dash fastner, wood preservative paint, providing and fixing polythene bubble sheet between mirror and backing ply, stainless steel caping to bolt head, melamine polish on wooden frame etc. complete. All visible wood would be steam beech

SUB HEAD-VIII : T.V. , TELEPHONE SYSTEM, CONDUITING and LAN SYSTEM

Providing, laying connecting and testing of multi-core telephone armoured/ unarmoured cable of conductor size 0.5mm dia annealed copper conductor PVC insulated PVC sheathed jelly filled (as per DOT specification) cable as required 50 Pair telephone armoured cable

Providing, fixing connecting and testing of under noted size of solderless telephone tag block Krone make in surface/recess in wall required size of M.S. box with hinged lockable cover duly stove enamel painted. 50 pair tag block

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

a) 20mm dia conduit pipe

b) 25mm dia conduit pipe

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) Supplying and fixing M.S. box with modular type telephone (RJ-11) outlet complete as required.

b) Supplying and fixing M.S. box with modular type coaxial outlet for TV antenna complete as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of 1 or 2 module (75mm x75mm) size GI boxes with modular base and cover plate for modular switches in recess etc complete as required

Supply, installation, testing and commissioning of 4 pair Category 6 LAN cable consisting of 23 AWG solid copper conductors and as per the specification. The cable shall have flexible jacket and ripcord for easy Strip ability

SUB HEAD-X : CCTV

Supply, Installation, Testing & Commissioning of IP CCTV 3MP @ 25 fps, H.264 Compression, 1/3" Low Illumination Aptina Cmos, Hisilicon DSP, IP Camera with 3 megapixel HD 2.8 - 12mm Lens, 48 IR LED upto 35 meters, Supports iOS & Android Apps. Supports ONVIF. IP66 Protection Rating. Supports POE. Should support rest all features of IP camera such as Multi Streaming, Image Snapshot, Full Screen Monitoring, Supports CBR & VBR, Motion Alarm, Online Users upto 10, Video Format in AVI & JPEG, Supports Video Playback and Delete. Supports D-WDR, 3D-DNR, ICR, Brightness, Contrast, Hue, Night Mode, Supports TCP/IP, UDP, DHCP, FTP, DDNS, PPPoE, Supports Cell phone, PDA, 3GPP. etc. all

Supply, Installation, Testing & Commissioning of NVR For Main Control Rooms- H.264 / MPEG4 decoding. -24 Channel IP cameras inputs, 1 Audio In & 1 Audio Out, 1 Video out @ VGA(1080P), 1 HDMI out (1080P). Real-time Display & Playback, Recording Mode in Manual, Schedule & Alarm, Recording & Playback Up to 720P @ PAL per CH, 8x SATA HDD port, 8 alarm input & 1 output, Network ethernet Interface supports 10/100/1000, Multi-Remote Client upto 4, backup by USB, DVD-WR, With remote control. PS2 interface for mouse. Supports DDNS, PTZ Control, RS-485, Digital Zoom, Motion Detection, Video Loss, Alarm recording, Buzzer, Each Channel Backup, Password Control, Firmware Update and Mobile applications. Power- 12VDC. etc. all complete (App Make: Axis / Urmet / Sony)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments: Special Surveillance 4TB 3.5" SATA HDD internal( For Servers). etc. all complete. (App Make: Seagate / WD)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments: 64" LCD Monitor for each server etc. all complete. (App Make: Samsung / Panasonic / LG)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments: 8 RACK IT INDUSTRY STANDARD RACK with ventilation, sliding shelves, power strips, etc. all complete.

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments: 650 VA, UPS etc. all complete.

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments: 1 KVA, UPS etc. all complete.

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Control Room Equipments: 24 Port L2 Managed 10/100/1000 Mbps Switch, Rack Mountable etc. all complete. (App Make Dlink / Netgear / Cisco)

Supply, Installation, Testing & Commissioning of IP CCTV Monitoring, Recording & Streaming System: Cat6 Unarmoured Cable for POE purpose. 10-Gigabit Ethernet speed with frequency upto 500 MHz. Max cable length of 90 meters (Quantity in running Meter) etc. all complete. (App Make Finolex / Panduit / TYCHO / Molex)

SUB-HEAD -XI : FIRE DETECTION SYSTEM

Supply, Installation, Testing & Commissioning of Microprocessor based 2 loop capacity , Networkable Analogue Addressable type Fire Alarm Control panel. The FACP shall have minimum 640 character Display with fully functional computerized keypad. Each loop shall have a minimum loading of 125 detectors and 125 devices in one loop with 20% spare capacity. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and for 2 hours battery backup during an emergency conditions as required. The FACP shall be UL 9th Edition Listed. FACP should have sufficient digital amplifier with sufficient cards for the PA riser and FFT riser. There shall be provision for connecting microphone and telephone handset to this panel. Failure of Fire Alarm Panel CPU shall not result in failure of operation of Amplifiers complete as per specifications as required.

Supply, installation, testing and commissioning of UL listed addressable type manual call point complete as per specification required.

Supply, Installation, Testing & Commissioning of Wall Mounted Voice Evacuation Hooter cum Speaker Cum Strobe (Light flasher) of 5W having power taps at 1/4-1/2 complete as per specification required.

Supply, installation, testing and commissioning of addressable control module for activating the hooter etc. complete as per specification required.

Supply, Installation, Testing & Commissioning of smoke cum heat detector complete with MS Powder coated Junction Box for mounting on Surface, Cable lugs at Ends, cable compression glands, cable tags and Ferruling complete as per specification required.

SUB-HEAD -XII : ACCESS CONTROL SYSTEM FOR OFFICE AREA

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :

PLUMBING WORKS : Sanitary Fixtures: (Fixing)

Providing and fixing white vitreous china extended wall mounting water closet of size 365x365x770 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. (Make: Jaquar WC- Cat. No. CNS-WHT-353N & Cistern Cat. No. CNS-WHT-203 )

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China under counter Wash basin size 590x420x195 mm with a pair of 15 mm C.P. brass pillar taps (Make: Jaquar basin- Cat. No.CNS-WHT-705, Pillar Cock Co. No. CON-011KN & couplig Cat. No.ALD-709 )

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : (Make: Neelkanth Model: : NK SB10 M ) Kitchen sink without drain board. Overall size, 375x324 mm bowl size 270x315x150 mm

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. (Make : Jaquar Cat. No. URS-WHT-13255 )

Prividing and Fixing SS liquid soap dispenser SS body and push button complete in all respects including fixing on wall with rawl plug complete in all respects. (Make: Toshi Cat. No. A )

Prividing and Fixing automatic 'NO-Touch ' electric hand-driers complete with all accessories & fittings.(Make: TOSHI Cat. No. HK-1800 SA )

C.P. FITTING

Providing and fixing CP brass Health faucet with 8mm dia 1 mtr. Long PVC tube and wall hook fixed to wall with rawl plugs and CP brass screws complete. (Make: Jaquar Cat. No. ALD-573 or equivalent)

Prividing and Fixing 1.5 feet long connection pipe with nuts at both ends complete. (Make: Jaquar Cat. No. ALD-803AB or equivalent)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (Make: Jaquar Cat. No. CON-107KN or equivalent) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 (Make: Jaquar Cat. No. CON-053KN ) 15 mm nominal bore

Providing and fixing soap dish fixed in position by rawl plugs and CP brass screws. (Make: Jaquar Cat. No. ACN-1131N )

Providing and fixing CP brass toilet paper holder. (Make: Jaquar Cat. No. AKP-35751P )

Soil, Waste, Vent & Rain Water Pipes

Providing and fixing sound insulated Polyproplene piping (PP) system as per ON EN 1451-Part 1-6 & EN 12056 Part 1-5 EN 752, DIN 1986-100 - class B/D, with 3 layer pipe made of PP-C + PP-MV + PP-C (halogen and calcium free) colour, push-fit type, having high impact and stiffness, offering sound levels of not more than 22 dBA as per DIN 4109 at a flow rate of 4 l/s and having pipe ring stiffness as per 1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, density of pipe to be 1.25gms/cm3, elongation = 0.05mm/m0K and tensile strength > 24 N/mm2,with all necessary fittings like elbows, bends, tees etc. fitted with factory fitted lip ring. (for inside toilet,kitchen & basement ceiling)

a) 40 mm outer dia

b) 110 mm outer dia

Providing and fixing sound insulated Polyproplene piping (PP) system as per ON EN 1451-Part 1-6 & EN 12056 Part 1-5 EN 752, DIN 1986-100 - class B/D, with 3 layer pipe made of PP-C + PP-MV + PP-C (halogen and calcium free) colour, push-fit type, having high impact and stiffness, offering sound levels of not more than 22 dBA as per DIN 4109 at a flow rate of 4 l/s and having pipe ring stiffness as per 1S0/DIS 9969 and tightness as per EN 1277/B and C and DIN 19560, density of pipe to be 1.25gms/cm3, elongation = 0.05mm/m0K and tensile strength > 24 N/mm2,with all necessary fittings like elbows, bends, tees etc. fitted with factory fitted lip ring. (for vertical pipe) 110 mm outer dia

WATER SUPPLY (Contractor should make nipples from same class of pipe, Readymade nipples will not be allowed)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) SDR-11 pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)SDR-11 pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

a) 20 mm nominal outer dia Pipes

b) 25 mm nominal outer dia Pipes

c) 32 mm nominal outer dia Pipes

HVAC WORKS : INDOOR UNIT (Supply, Installation,Testing & Commissioning of following capacity modulating type 4 way cassette VRV system Indoor unit along with cordedless remote, necessary supports, nuts & bolts etc complete.) 4-Way Casette Type Units : (a) Cassette Type : 2.0 TR

FINISHES : PLASTER/DADO/CLADDING

P/A wallpaper of approved adesign, shade and color

WHITE MAGNETIC BOARD

P/F White magnetic Ceramic coated board of size 6' x 4' in matt finish made up of non-porous porcelain (Ceramic) steel surface made from Provision Corpn. Belgium 0.60mm thick and core material of 9mm thick with GI backing 0.28mm thick and border profile made up of anodised aluminium section 1.2mm thick and moulded ABS at corners having total weight of 13kg per Sqm. No MARKER BOARD IN EXECUTIVES CABIN.

TAG BOARD

P/F Fabric Trckable board made of 12mm thick particle/cellotex board with GI sheet over 6mm thick commercial ply backing covered with fabric, fixed to walls, partitions with screws and surrounded with wooden moulding of size 30mmx19mm with melamine polishing etc. complete. ( Basic price of thr fabric shall be taken 250.00 per mtr. for 1.20 mtr. width excluding taxes).

1)Furniture Work A

Modular Storage Unit

Full Ht. storage up 1450*3000*450mm (PA)

P & F modular storage unit,The structure is made out with 19mm thk ply board with post formed sheet approved veneer shade by Architect /Engineer in incharge with Top made up of 25mm thick mdf board/water proof ply with post formed finish and 2mm thick PVC edge banding of matching colour total 3 nos. of fixed shelves There is a 75mm skirting provided in the bottom area as per drawings. all inner surface approved veneer The unit is duly covered with 2 nos. of openable shutters 18mm mdf board inside shelve made out with 19mm ply board veneer finish with postformed finish fitted with hinges, handles, lock and all other hardware/accessories as per design.

Toilet Venitye up 830*600*600mm (Toilet Venity)

P & F modular storage unit,The structure is made out with 19mm thk WPC board with post formed sheet approved veneer shade by Architect /Engineer in incharge with Top made up of 25mm thick mdf board with post formed finish and 2mm thick PVC edge banding of matching colour total 3 nos. of fixed shelves There is a 75mm skirting provided in the bottom area as per drawings. all inner surface approved veneer The unit is duly covered with 2 nos. of openable shutters 18mm mdf board inside shelve made out with 19mm WPC board veneer finish with postformed finish fitted with hinges, handles, lock and all other hardware/accessories as per design.

Pantry Under Counter Storge up 3004*600*750mm (Pantry)

P & F modular storage unit,The structure is made out with 18mm thick MDFboard with post formed sheet approved shade by Architect /Engineer in incharge with Top made up of 25mm thick mdf board with post formed finish and 2mm thick PVC edge banding of matching colour having total 1 nos. of fixed shelves There is a 75mm skirting provided in the bottom area as per drawings. The unit is duly covered with 2 nos. of openable shutters 18mm mdf board approved shade by Architect /Engineer in incharge in side shelf made out with 18mm MDFboard laminate finish with postformed finish fitted with hinges, handles, lock and all other hardware/accessories as per design.

Pantry Overheard storage up 2430*600*600mm (Pantry)

P & F open file storage unit,The structure is made out with 18mm thick MDFboard with post formed sheet approved shade by Architect /Engineer in incharge .(as per drawimg )open shelves of size 0.450 x0.400 of fixed partion There is a 75mm skirting provided in the bottom area as per drawings. in side shelf made out with 18mm MDFboard laminate finish with all necessary hardware

Table Side cabinate 3004*1350*600mm

P & F modular storage unit,The structure top and leg made out with 36mm thick MDF board with approved laminate shade by Architect /Engineer in incharge with modesty panel made up of 18mm thick mdf board with laminate and 2mm thick PVC edge banding of matching colour total 2 nos. of fixed shelves and 6 nos. drawer There is a 75mm skirting provided in the bottom area as per drawings. all inner surface approved laminate The unit is duly covered with 2 nos. of openable glass shutters 18mm mdf board inside shelve made out with 18mm MDFboard laminate finish with postformed finish fitted with hinges, handles, lock and all other hardware/accessories as per design.

Conference table ( Size 5180MMx2285MMx750MM)

Supply & fixing in postion Conference table with circuler edge ( size 5180MMx2285MMx750MM)The conference table top is modular having following modules . It is the main module used for making modular conference table. It is of size 8100MMx1350MMx750MM(WXDXH). The top surface will be made of 36mm thick MDF board with approved shade by Architect/Engineer in incharge with Laminate finish. Top surface fixed on rectanguler Box of size (5180MMx2285MMx750MM) with extra edge support.(as per drawing) and these will be made of 18mm thick MDF board as per IS:12823 having density 600-900 kg/m3 , post formed with 2.0mm thick PVC Edge Banding of matching colour on the edges. Quarter Round Corner Module It is used as a corner module in a conference table. It is quarter round in shape. the conference table complete with all necessary hardware and fittings.

Notice board with cabinate 1500*900*230

P & F notice board with cabinate , the structure is made of 18mm thick MDF board with approved shade of laminate by Architect/Engineer in incharge. openable glass shutter . 12mm thick ply is fixed on 18mm Thick MDF board with approved fabric.

R CS Table with Side Credenza /pedestal (pa table)

Supply & fixing in postion RCS Table Size 2440 MM x1220MM x762MM The table top And side leg would be made in 36mm thick MDF board with Round post formed Shape Finished with Approved Lamintae Shade with 2mm thick PVC edge Bending All side covered. with 12 mm glass shall have plain daimond edge polishon all four and whole wire manager the glass should cover the length of the table and width of side unit Side credenza : Size 1050 X 450 X 750 mm : The top would be made out of 36mm thick MDF board with half Round Post Formed Shape Finished With Approved Laminates Shade Reverse side of top is laminated in matching color. Side panels would be made out of 18mm thick mdf board laminated with 0.6mm thick curvica laminate in side. All edges are sealed with 2mm thick pvc edge bending in matching color. The back side of the side unit would be made out of 18mm thick MDF board laminated with 0.6mm thick mica finish. Shutters of side unit would be made out of 18mm thick MDF board with 0.6mm thick mica finish. The edges of the shutter are in quarter round shape. Reverse side of shutter is laminated in matching color. as per drawing. Pedestal Unit: The drawer unit of size 725 x 380 x 450mm (H X W X D) made out of 18mm thick MDF board, having three number of drawer units, the one top units of 6” depth each and the bottom drawer of 15” depth. The front shutters matching with top surface in quarter round post formed shutters and mounted on sliding channels including necessary hard-wares, SS Handle locks etc. Accessories:Provision with one keyboard tray (Wooden), CPU trolley (metal) .

Executive Table with side credenza

Supply & fixing in postion Executive Table : 4400 X 1350 X 750 mm The table top would be made in 25mm thick MDF board with half round Post Formed Shape Finished approved Laminate Shade by Architect/Engineer in incharge. The modesty panel Side Panel would be made out of 18mm thick MDF board and laminated with 0.6mm thick inner mica finish. with 10mm glass shall have plain daimond edge polishon all four and whole wire manager the glass should cover the length of the table and width of side unit Side Credenza: 4400 X 1350 X 750 mm: The top would be made out of 25mm thick MDF board with 0.6mm thick mica laminated finish. The edges of the top are in half round shape. Reverse side of top is laminated in matching color. Side panels would be made out of 18mm thick mdf board laminated with 0.6mm thick curvica laminate on one side. All edges are sealed with 2mm thick pvc edge bending in matching color. The back side of the side unit would be made out of 18mm thick MDF board laminated with 0.6mm thick mica finish. Shutters of side unit would be made out of 18mm thick MDF board with 0.6mm thick mica finish. The edges of the shutter are in quarter round shape. Reverse side of shutter is laminated in matching color. Pedestal Unit: The drawer unit of size 725 x 380 x 450mm (H X W X D) made out of 18mm thick pre-laminated board, having three number of drawer units, the one top units of 6” depth each and the bottom drawer of 15” depth. The front shutters matching with top surface in quarter round post formed shutters and mounted on sliding channels including necessary hard-wares, handle locks etc. Accessories: Provision with each seat one keyboard tray(metal), CPU trolley (metal)

Table with side unit (joint and technical Reg.)

Table with : 1150 X 900 X 750 Main Table & Top Surface: The main table of size 1800 x 900 x 750mm with the top surface made out of 25mm thick MDF board with half Round shape post forming on front and the rear side and the rest of the sides edge banded with 2mm thick matching colour PVC Edge banding and balancing laminate of matching colour on the reverse side. with 10mm glass shall have plain daimond edge polishon all four and whole wire manager the glass should cover the length of the table and width of side unit Side Credenza: Size 900 x 450 x 600 mm top surface made out of 25mm thick MDF board post formed and laminated with balancing laminate on reverse side 2mm thick matching colour PVC Edge banding and the rest of the sides edge banded with 2mm thick matching colour PVC Edge banding and balancing laminate of matching colour on the reverse side. Two shelves & one openable shutter.Drawer unit:The drawer unit of size 625 x 450 x 450mm (H X W X D) made out of 18mm thick pre-laminated board, having two number of drawer units, the one top units of 6” depth each and the bottom drawer of 15” depth. The front shutters matching with top surface in quarter round post formed shutters and mounted on steel telescopic channels including necessary hard-wares, handle locks etc. Pedestal Unit: The drawer unit of size 725 x 380 x 450mm (H X W X D) made out of 18mm thick pre-laminated board, having three number of drawer units, the one top units of 6” depth each and the bottom drawer of 15” depth. The front shutters matching with top surface in quarter round post formed shutters and mounted on sliding channels including necessary hard-wares, handle locks etc. Accessories:Provision with each seat one keyboard tray(metal), CPU trolley (metal)

The Printer table with below cabinate 1200*600*750: The Printer table top will be made out of 25mm thick MDF board post formed with matching colour laminate with half round post forming on the front and rear end and 2mm thick PVC banding on side of matching color pasted with PUR glue with wire manager with approved shade by Architect /Engineer in incharge. storage: provided (As per Drawing) with 1 nos. of fixed shelves and 2nos. of open shelves There is a 75mm skirting provided in the bottom area. The unit is duly covered with 2 nos. of openable shutters made out with 18mm MDFboard laminate finish with postformed finish fitted with hinges, handles, lock and all other hardware/accessories as per design.

Director's Chair and Visitor's Chair Baxter 01: High Back Revolving Chair Providing & fixing high back revolving chairs with seat & back made of 12 mm thick hot pressed moulded ply bonded from resin which emmits low ureaformaldehyde validating green point of view.ply rivetted with starnut for increasing strength in ply & fastening of fastners ply design for extra back comfort & chair isergonomically comfortable for every point of view riveted with starnut for increasing strength in ply & fastening of fastners .seat & back provided with pu foam of density 50kg3 of thickness 45 mm to 50 mm. contours designed in foam to give complete seat support& thigh support. defining comfort with cushioned arms for extra comfort. providing 660 mm dia five pronged Chrome base tested upto 1200 kg impact load to evaluate the the stability of the padastal be applied on the chair i.e. 1.Static load applications; 2.Dynamic load applications. Cold rolled steel of IS: 2062 or Cold rolled steel- for MS sheet thickness 0.63mm- 2.0 mm conforming to IS:513. the sizes are specified below:- seat size:- 540mm(w) x 500mm(d) back size:- 490mm(w) x 860mm(h) seat hight:- 460mm Min. - 560mm top to floor hight:-2000mm - 3000mm handle to handle :- 650mm

Baxter 03: Fix Visitor Chair Providing & fixing visitor chairs with fix SS base, seat & back made of 12 mm thick hot pressed moulded ply bonded from resin which emmits low ureaformaldehyde validating green point of view.ply rivetted with starnut for increasing strength in ply & fastening of fastners ply design for extra back comfort & chair is ergonomically comfortable for every point of view rivetted with starnut for increasing strength in ply & fastening of fastners .seat & back provided with pu foam of density 50kg3 of thickness 45 mm to 50 mm. contours designed in foam to give complete seat support & thigh support. defining comfort with cushioned arms for extra comfort. Providing fix Cantilevered base below the chair in 304 grade Stainless Steel in 25mm dia pipe of 16swg. The chair seat & back is covered with high quality leatherite of 500 GSM All steel structural components shall be processed and made from virgin material sourced from SAIL/TataSteel/Jindals . Following type of tests shall be applied on the chair i.e. 1.Static load applications; 2.Dynamic load applications. Cold rolled steel of IS: 2062 or Cold rolled steel- for MS sheet thickness 0.63mm- 2.0 mm conforming to IS:513. the sizes are specified below:- seat size:- 540mm(w) x 490mm(d) back size:- 490mm(w) x 740mm(h) seat hight:- 460mm from the ground top to floor hight:- 1120mm handle to handle :- 650mmBaxter 03: Fix Visitor Chair

Providing & fixing visitor chairs with fix SS base, seat & back made of 12 mm thick hot pressed moulded ply bonded from resin which emmits low ureaformaldehyde validating green point of view.ply rivetted with starnut for increasing strength in ply & fastening of fastners ply design for extra back comfort & chair is ergonomically comfortable for every point of view rivetted with starnut for increasing strength in ply & fastening of fastners .seat & back provided with pu foam of density 50kg3 of thickness 45 mm to 50 mm. contours designed in foam to give complete seat support & thigh support. defining comfort with cushioned arms for extrabe applied on the chair i.e. 1.Static load applications; 2.Dynamic load applications. Cold rolled steel of IS: 2062 or Cold rolled steel- for MS sheet thickness 0.63mm- 2.0 mm conforming to IS:513.

SUPPLY OF SOFASET WITH CROME BASE PER SHEET (WAITING AREA)

PER SHEET (MD)

REST ROOM BED WITH 8" METRESS

Miscellaneous Item

Stainless Steel Dustbin of Size 12”x 32” .Stainless Steel 202/304 Grade

side table with Glass top of 450 X 450mm. understructure and self made of wooden With melamine polish .Top made of 10mm thick Toughen glass With all necessary Hardware and fitting Etc.

Centre table with glass top of 1200 X 600 X 450mm Rectangular Shape. understructure and self made of wooden With melamine polish .Top made of 10mm thick Toughen glass With all necessary Hardware and fitting Etc.

AK JAIN AND ASSOCAITES

AK JAIN AND ASSOCAITES