ADDITION/ ALTERATION TO NCs (E)

Amount

Chipping/removing loose concrete up to reinforcement bars, without damaging the reinforcement, removing all the loose material and to make all the exposed surface free from dust and all impurities etc. complete all specified and directed. Note : The quoted rate is applicable to work up to three storey building.

Removing corrosion of steel reinforcement by mechanical means like wire brushing, chipping to remove loose rust and then applying rust removal solution by using brush application, leaving the surface for at least 15 to 30 minutes, then removing loose materials by scrubbing or with brush and applying polymer bond to the old concrete surface before applying polymer mortar complete all specified and directed. Note : The quoted rate is applicable to work up to three storey building. Make : - SIKA-SIKA Rust off 100 or SIKA S.B.R or latex power. FOSROCK - Reebaklens RR or Nitobond AR.

Application of Corrosion Inhibitor Providing & applying One coat of Concrete Penetrating Corrosion Inhibitor (Surface applied) which work on Bipolar Inhibition Mechanism on entire concrete surface to be repaired by using brush or spray at 250 ml per Sq.Mt/Coat or as per manufacture's specification and prior to application of frist coat of anti corrosive coating to reinforcement complete all specified and directed. Note : The quoted rate is applicable to work up to three storey building. Make :- SIKA-Feroguard 903 FOSROCK - Auramix BCI

Providing and applying priming cum bonding coat of polymer of approved make and quality as approved by Engr-in-charge and cement slurry in 1:1 proportionate by weight to concrete area by brush or any other established method etc complete all specified and directed. Note : The quoted rate is applicable to work up to three storey building. Make :- SIKA- SIKA Latex or SRB FOSROCK - Nitobond EP

Providing Micro Concrete jacketing to walls/columns or beams of thickness upto 75mm using polymer modified cement premixed quartz sand aggregate packed in bags of standard manufacture , for high early strength of 40 N/mm sq cm of approved brand. The dry product is to mixed with 12.50% water by weight, along with washed and poured into rigid form work moulds & tamped properly, & cured for 3 days (Payment is to be made by weight premixed of micro concrete product consumed as per site register records. No extra payment shall be made for shuttering or any other material, like scaffoling etc. Note : The quoted rate is applicable to work up to three storey building. Make :- SIKA-SIKA Rep microconcrete-4 FOSROCK : Rendero CRG

Providing and applying polymer modified cement mortor of average thickness 15-20mm using Polymer in one or more layers in proportion 1:5:15 of Polymer Cement Quartz Sand as manufacture's specification in speific layers, curing after 72 hours of application with wet gunny bags etc and by finishing the surface with 12 mm thick (1:3) Cement sand plaster complete all specified and directed. Note : The quoted rate is applicable to work up to three storey building. Make :- SIKA- Sika 122 WL FOSROCK- Renderoc -S2

Providing and applying one coat of structural grade epoxy bond coat by brush conforming to ASTM-C-882-87 to the prepared concrete surface to repaired/strengthened. This is applied prior to the application of polymer repair mortar/epoxy mortar/Microconcrete to have monolithic action between old concrete surface and new concrete surface. Note : The work up to three storey building complete all specified and directed. Make :- SIKA- SIKADUR 32LP, HIBOND

Providing and applying polymer modified cement mortor of average thickness 30-40mm using Polymer in two layers in proportion 1:5:15 of Polymer Cement Quartz Sand as manufacture's specification in speific layers, curing after 72 hours of application with wet gunny bags etc and by finishing the surface with 12 mm thick (1:3) Cement sand plaster complete all specified and directed. Note : The quoted rate is applicable to work up to three storey building. Make :- SIKA- Sika 162 HS FOSROCK- Renderoc HS xtra

Demolition of concrete in ground floors and pavings n. exc 15 cm thick ( above or below the ground level) complete all specified and directed

Demolition of concrete in above ground floors and pavings n. exc 15 cm thick complete all specified and directed

Demolition of brick work/ Stone masonery built in cement mortar or cement lime mortar complete all specified and directed

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

M&L brickwork with fly ash bricks straight or curved on plan exc 6m mean radius half brick thick walls, built in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortor bedding (but not backing) to stone and rubbish off the premises complete all as specified and directed.

Taking down cement plaster on brick or stone walls, ceilings, etc including racking out Joints, hacking for key, scrubbing down with water, etc complete all specified and directed

M&L for Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate, 75mm thick for sub base complete all specified and directed.

M&L for Cement concrete 1:2:4, type B-0 using 12.5 mm graded stone aggregate, 25mm thick for sub base all as specified.

M&L for Screed bed or bedding layer of mortor 15 mm thick in CM 1:6 for laying floor finishes all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado all as specified and directed.

M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge .

All as per item No 20 above but as in skirting complete all specified and directed

M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge..

M & L Glazed coloured ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge..

M & L Chequered coloured Cement conceret tiles 300mmx300mmx25mm thick set, jointed and pointed in neat cement surry with pigment in floor to match the surface all as specified and as directed by Engr-in-charge..

M & L for complete removal existing treatment of wall surfaces and applying two coats of distemper oil emulsion over a coat of primer all as specified and as directed by Engr-in-charge.

M & L for preparation of old plastered surfaces and applying two coats of white wash on ceiling surface complete all specified and directed .

Preparing old surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all specified and directed.

Preparing old surface of steel and steel based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all specified and directed.

M & L for preparation of old treated wall surfaces and applying two coats of white wash complete all specified and directed

M&L for Rendering in CM 1:6, 10mm thick on fair faces of brick work or concrete surfaces all as specified and directed.

M & L prepation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over over a coat of primer all as specified and as directed directed by Engr-in-charge.

M & L Rendering in CM 1:3, 5mm thick on fair faces of brick work or concrete surfaces on ceiling complete all specified and directed.

M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all specified and directed.

M&L for Rendering in CM 1:4, 15mm thick on other than fair faces of brick work or concrete surfaces complete all specified and directed.

M & L prepaeation newly plastered of wall surfaces and applying two coats of cement base paint over a coat of primer all as specified and as directed directed by Engr-in-charge.

Preparation of old treated of wall surfaces and applying one coat of cement base paint all as specified and as directed directed by Engr-in-charge.

M & L preparation of old wall surfaces and applying finishing with acrylic smooth exterior paint of approved shade all as specified and as directed directed by Engr-in-charge.

Taking down chowkhats or frames with shutter (with out taking off the shutters from the frames) size exc 1.50 sqm and not exc 4.00 sqm each and complete all specified and directed

Taking down chowkhats or frames with shutter (with out taking off the shutters from the frames) size not exc 1.50 sqm each and complete all specified and directed

Taking down shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each and refixing in the same opening after easing and adjusting andcomplete all specified and directed

Taking down shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each complete all specified and directed

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing etc complete all as specified and as directed by Engineer- in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rial, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement , suppling & fixing in the frame at site as per specification & drawing etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 40 mm thick plain , framed panelled shutters with Ist class softwood (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers fit to chowkahts all as specified and as directed by Engineer-in-Charge.

Material and labour for 35 mm thick Glazed and skeleton shutter, first class soft wood open rebated and prepared to receive glass , gauge, etc with sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a) and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge.

S&F steel window with side hung shutters including projecting type with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel window with side hung shutters including projecting type with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilators with top hung shetter including hinges, steel peg stay complete all as specified and directed.

M&L framed work such as grills ,gratings etc with ends of bars shouldered or riveted, or forged into spikes conforming to Fe 290-Gde -E-165 complete all specified and directed.

Preparing new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Preparing new surface of steel and steel based material of any description not otherwise described over 10cm width or girth and applying one coat red oxide zinc chrome and two coat of of synthetic enamel paint complete all specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each panes complete all as specified and directed.

S&F 3mm thick figured glass head type and glazing with oil putty in square n. exc 0.5 sqm in each panes complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each panes including hacking out old brocked glass complete all as specified and directed.

S&F 100mm long butt hinges, heavy weight, cold rolled mild steel and complete all specified and directed

S & F Floor door stopper 140mm long with cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all specified and directed

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wore staples complete all specified and directed

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wore staples acomplete all specified and directed

S&F 150mm long Aluminium anodised barrel towers bolts of extruded section and complete all specified and directed

S&F 125mm long extruded aluminium alloy handles, fabricated type, anodised butt hinges, heavy weight, cold rolled mild steel and complete all specified and directed

S&F in repairs Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete and complete all specified and directed

S&F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete and all as specified and directed

S&F in repair 25 mm dia aluminium drapery rod with wooden finish, decorative, including brackets, decorative finials at both ends & curtain rings 8 Nos (minimum) complete all as speccified and directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement withadmixture of pigment to match the shade of granite stone including 15mm thick screed bed or bedding layer of in CM 1:6 complete all specified and directed

Dismantling of boarding , any description , fixed in any position with nails including battens etc complete all specified and directed.

M & L for 18/19mm thick prelaminated particle board , exterior gragrade , prelaminated both side with decorative choice laminarion and and fixefd with screw to frame etc complete all as specified and as diirected.

S&F 4mm thick veneered decorative plywood, grade 1 (with BWR resin ) with decovative face veneers one face, fixed to frame of aluminium sliding frame complete all as specifed and directed.

S&F anodised aluminium alloy rail with stops, roller etc fixed to wall for sliding 4mm thich plywood in cup board complete all as specified and directed.

S & F 40mm dia, cup board knobs fixed with screw and washer of mild steel, bright finish compler all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore complete all as specified and directed.

All as per item No.70 above but for 20 mm bore complete all specified and directed

S&F steel tubing medium grade galvanised with all fitting and fixtures complete to walls and or laid in floors 15mm bore complete all as specified and directed.

All as per item No.72 above but for 20 mm bore complete all specified and directed

S& F in repair Vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specifed and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white including seat cover and flush pipe etc complete all as per specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous china squatting pan 'Orrisa' pattern, size 580x440 mm white with intergal foot rests ( excluding flushing cistern and flush pipe) complete all as specified and as directed by Engineer-in-Charge.

M & L for PVC (SWR) multi floor trap of 75mm dia with grating including jointing with solvent cement etc complete all specified and directed

M & L for PVC (SWR) gully trap of 125/110mm dia includingsetting jointing with solvent cement etc complete all specified and directed

S & F Unplasticised PVC pipe 50mm dia of pressure rating 10 kgf /cm2 fixed complete to walls, ceiling or in floors etc complete all specified and directed

S & F in repairs PVC (SWR) pipe 110mm dia single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed.

S&F PVC (SWR) bends 110mm radius complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm radius complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single T) equal or unequal 110mm radius complete all as specified and directed.

S & F in repairs PVC (SWR) pipe 75mm dia single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm radius complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single T) equal or unequal 75mm radius complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 Ltrs capacity , low level , white, with inlet , ball valve, float and handle including brackets and flush pipe etc complete all as specified and as direted by Engineer-in-Charge.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all specified and directed

S & F in repairs towel rail 60cm long of brass chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms). complete all specified and directed

S&F in repairs Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore complete all specified and directed

S&F in repairs chromium plated angle valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size complete all specified and directed

S&F in repairs Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 15 mm bore complete all specified and directed

S&F in repairs 125mm dia shower rose brass chromium plated with or without seivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs chromium plated stop valves concealed type , cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 15 mm size complete all specified and directed

S&F in repairs brass chromium plated health faucet with hand held and spring operated control valve with PVC flexible pipe connection of suitable length as directed fixed to 15 mm bore pipe complete all specified and directed

S&F in repairs sinks made of stainless steel 1mm thick kitchen with plugs, waqshers and wastes, including bedding in cement mortar on to dward wall or including fixing cantilever brackets and connection union to pipe, overall size 492X420mm bowl size 410mmX330mmX160mm complete all as specified and directed.

Disconnecting existings PVC water tank 500 Ltr capacity , setting a side (or lowering if required) for repairs, claening, etc. and hoisting if required reconnecting and refixing in position. (Cleaning repairings, etc. measured sepaeately) complete all specified and directed

Cleaning and removing all scale and dirt etc, from PVC tank 500 ltr capacity and from mouths of circulating pipes, etc. complete all specified and directed

Dismantling of PVC water tank 500 ltr capacity and removing to store complete all specified and directed

S&F moulded polyethylene 500 ltr water tank storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-charge.

S&F in repairs 20 mm Ball brass valves, high pressure, with polythene float and flynut cimplete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore Gun-metal , globe or gate valve, with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed.

S&F in repairs 20mm bore Gun-metal , globe or gate valve, with iron wheel head, screwed both ends for iron pipe fixed complete all as specified and directed.

S&F Mild steel angle iron frame work as in door, plate rails , braces etc running rails and fastening and fixing in nosing of staircase steps conforming to FE 410 W (Gde E -250 Quality A) complete all specified and directed

M&L for Cement concrete type B-1, 1:2:4 (20 mm graded aggregate ) 40mm thick as in floor , staircase etc finishing cement concrete surface even and smooth complete all specified and directed

Demolition of reinforced cement concrete in other than ground floors landings, chajjas and similar work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumn, hooking ends and binding with and including mild steel wire (annealed) 0.9mm dia or securing with clips complete all as specified and directed.

M&L reinforced cement concrete type 1:2:4 B1 (using 20mm graded aggrigate) as in chajja complete all as specified and directed.

M&L for Formwork to flat chullah hoods, chajja, troughs and similar items including edges and fair finished surface complete all as specified and directed.

ATT of soil under existing floors using emulision @ one litre per hole 300mm apart including drilling and plugging 12mm dia hole with cement mortar 1:2 and match the existing floor complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall using chemical emulsion at the rate of 2.25 liters per linear meter including drilling and plugging holes etc. in apron complete all as specified and directed.

S& F Stainless Steel Plate rack of size 600X900x250mm fixed to walls complete all as specified and directed.

M&L for Cement concrete type E-2 , 1:5:10 (40 mm graded aggregate ) as in sunken portion complete all specified and directed

M&L for Rendering 15mm thick in on fair faces of concrete surfaces in CM 1:3 mixing with integral water proofing compound (WPC) @ of 3% of cement and finished even and smooth (without using extra cement) complete all as specified and as directed. Note :- WPC will be measured and paid separately as supply only.

M&L for Cement concrete type C-2 , 1:3:6 (40 mm graded aggregate ) 75mm thick as in plinth protection complete all specified and directed

M&L for Cement concrete type B-1, 1:2:4 (20 mm graded aggregate ) 40mm thick roof surface with water proofing compound and surface finishing cement concrete surface even and smooth using extra cement complete all specified and directed

Supply only Intergral waterproofing compound complete all specified and directed

APP based polymeric water proofing membrane 4 Kg/Sqm incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bituminous primer @ 0.2 Kg/sqm followed by a coat of blown bitumen of grade 85/25 or 90/15 @ 1.2Kg/Sqm each at top and bottom of the membrane complete including sealing all joints by thermo fusion with minimum 10 cm side overlap and 15 cm end overlap and applying one coat of aluminium paint at the rate of 100 grams/per sqm all as per manufacturer's instructions complete all as specified and directed.

S&F Cement concrete tile 300x300x20mm thick machine pressed , over 15mm thick screed bed CM 1:4, set jointed and pointed in neat cement slurry with grey cement and pigments in roof complete all as specified and directed.

Removal of debries /building material out side the campus including loading and unloading , etc to a distance exc 5.00 Km but n. exc 10.00 Km out side the MoD land all as specified. Note: Location and premission of depositing the building materials/ disposal out side the MD land shall rest with contractor at his own arrangement complete all specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or Power) complete fittings such as switches , ceiling roses pendents , regulators sockets light fittings etc removing to store for keeping in safe costody or for taking credit and making good disturbed surface of wall, floors , roof etc all as specified and directed.

Taking down Ceiling fan sealing cable end, dismantling blades from fan, painting of Ceiling fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc, refixing and connecting up including provision of cable from celling rose/ connector to fan including keeping in safe custody for reuse at site and making good the disturbed surfaces complete all as specified and as directed.

Taking down exhaust fan, dismantling blades from fan, painting of exhaust fan complete, in situ with synthetic enamal paint by spraying incl filling cavities with filler, one coat after cleaning all dust etc, refixing and connecting up including provision of cable from celling rose/ connector to fan including keeping in safe custody for reuse at site and making good the disturbed surfaces complete all as specified and as directed.

M&L for concealed point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm on concealed including provn of pressed steel terminal box of suitable size with 3mm thick hylum sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm for One light point controlled by one switch one way all as specified and directed.

All as per item No 125 above but One celling fan/ exhaust fan point controlled by one switch one way

All as per item No 125 above but two way light point controlled by two way switchs

All as per item No 125 above but One socket out let point 5 Amps on same board

All as per item No 125 above but One socket out let point 5 Amps on independent board

All as per item No 125 but for One call bell point controlled by one push button

All as per item No 125 above but with cable size 2.5 Sq mm for one 3/5 pin 15 Amps socket outlet on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed.

Note for item No. 125 to 131 :- Cutting chases for routing conduit and making good as per the existing where ever necessary shall be measured and paid seperately.

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed.

M&L Switch piano, flush type single pole, one way 5 Amp 240 V all as specified and as directed.

M&L Switch piano, flush type single pole, one way 15 Amp 240 V all as specified and as directed.

M&L Switch piano, flush type single pole, two way 5 Amp 240 V all as specified and as directed.

S& F Bell push, 5A single pole complete all as specified and as directed.

S & F Socket outlet 3/5 pin, 5 Amp flush type 240 volts complete all as specified

S & F Multi socket outlet two in one, 3 pin, 5& 15 Amp flush type 240 volts complete all as specified

S&F Step type fan regulator, electronic, step type , flush type on the existing phenolic laminated sheet complete all as specified and as directed.

Supply & fix LED mirror light helios 11 watt complete and making connection complete all as specified and directed.

Make: Luker Cat No. LMR9, Philips Item Part No. 919215850323 or equivalent in Bajaj/Havells.

Supply & fix environment friendly, ultra modern, energy saving surface mounting decorative oval shape bulk head edge-lit LED luminaries 10 watt comprising of high brightness LED complete and making connection complete all as specified and directed.

Make: Havells, Cat No. RUGBYNEONFT10WLED860SSYMTOPC, Luker Cat No. LBKOVSL04 or equivelent in bajaj/Philips.

Supply and fix universal regal LED batten retrofit type with LED tube 1x20/22 watt surface mounting tube light fiiting complete and making connection complete.

Make: Havells Cat No.REGALBATTENT8UPTOX22WSSBSWH with LED Tue rod Havells Cat No.CRYSTAL1213T8DSTL20WLED865SGLASS, Luker Batten Cat No.LLTB with tube CatNo. LT820T or equivelent in crompton, Bajaj.

Supply and fix building security light 36 Watt, new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07 complete including fixing bracket of suitable size including making connection and including taking down old unserviceable light fitting complete all as specified and directed.

Make: Luker Cat No. LST36, Havells Cat No. ENDURACITYLITEPLATPLUSSL35WLED757SASYBOPC, or Equivelent in Philips, Crompton.

S&F LED lamp 09 Watt, white with B-22 cap complete all as spcified and directed. Make Luker Cat No.LBPC09CL or equivalent in Havells, Crompton.

Make Luker Cat No.LBPC09CL or equivalent in Havells, Crompton.

S&F lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete.

Taking down old unserviceable submain wiring of any size including GI/copper earth continuity conductor in PVC conduit on wall/roof and making good to disturbed surfaces all as directed.

M&L for concealed Sub main wiring by making recess in wall/surface complete with 2 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 1 run of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through in and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories surface/concealed in wall/Ceiling etc all as specified and as directed by engr - in- charge.

S&F Bell multi music type, single pole, AC, 230 volts complete all as specified and directed.

Supply and fix sheet metal enclosure with distribution board vertical (DB) VTPN, 415 volts, having IP:43 protection, isolated neutral bar, insulated busbar assembly, door earthing arrangement, mechanical impact strength IK08, 04 way double door suitable for fixing MCCB 125 Amps as incommer and MCBs SP as out going complete, fixed on wall and connecting with all electric connections/circuit complete all as directed by Engineer in charge.

Make: Indoasian Cat No. 811888 or equivelent in Havells/ Standard.

Supply and fix 3 pole MCCB 125 A ,50 Hz,415 V with rupturng capacity 16 kA, F1 frame, thermal setting, adjustable complete all as specified and directed.

Make: Indoasian Cat No. 830229 or equivelent in Havells/Standard.

Supply and fix MCB DB, SPN, 08 ways, Isolated neutral bar, IP54 protection, door earthing arrangement with cement spill protector, mechanical impact strength IK09 complete.

Make: Indoasian or equivalent in Havells/Standard

Supply and fix MCB SPN 63 Amps, 240 Volt, 10 kA C curve complete all as specified and directed.

Make:Make: Indoasian Cat No. 811153 or equivelent in Havells/Standard.

Supply and fix MCB SP 6 to 32 Amps, 240 Volt, 10 kA B curve complete all as specified and directed.

Make:Make: Indoasian Cat No. 811018 or equivelent in Havells/Standard.

M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:2:4 type B-1 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009. (i) The unit rate includes earthing wire, and protection pipe upto 7.5 metre.

M&L for 4 mm dia galvanised iron or steel wire as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required complete all as specified and as directed.

Disconnecting carefully electric energy meter single phase and keeping aside , and re-fixing the same after necessary wiring work complete all as specified and as directed.

Disconnecting carefully old unserviceable distribution boards any sizes including MCBs including making good to the disturbed surface complete all as specified and as directed.

Cutting chases/recess, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

K S MUTHU CONSTRUCTTIONS

RMK INDUSTRIES

p.chinnasamy

Lucky Enterprises