Infrastructural facilities, MS shed and allied works for collection and disposal of garbage/solid waste management in factory premises at HAL Lucknow

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC for the said work shall be 995419

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.123960.00

Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of Items

Surface dressing of uneven surface not exc. 15 cm deep, cutting & filling, including cutting of wild growth, jungle, cutting and uprooting of plants/ wild vegetation etc. also removal of surplus earth, wild growths, plants etc as directed by EIC upto a lead of 150 Mtr with labour, T&P etc all complete as per direction of EIC.

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.c.,including Dewatering if required ( including Providing and removing timbering as planking, shuttering and raking shores wherever required) etc., Complete as per specification, drawing and as directed by Engineer in charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete etc. required for proper completion of work and as per specification and direction of E.I.C.

Providing & laying PCC: 1:4:8 (1 cement: 4 coarse sand : 8, 40 mm size graded stone aggregate) in foundation, under floors or any other similar description of works, with mechanical mixing including necessary form work/shuttering, compaction, curing including, materials, labour, T&P etc, required for proper completion of the work as per specification & direction of EIC.

Providing & laying 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) in foundation, under floors or any other similar description of works, with mechanical mixing including necessary form work/shuttering, compaction, curing including, materials, labour, T&P etc, required for proper completion of the work as per specification & direction of EIC.

Providing & laying cement concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregat 20 mm nominal size of Bahratcoop/Dala/Jhansi) in sub-structure upto plinth beam e.g. column fooling, plinthbeam, floor, pavement, drain or any other similar description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc all complete as per direction of EIC.

Providing & laying cement concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregat 20 mm nominal size of Bahratcoop/Dala/Jhansi) in super structure i.e. above plinth beam eg. column, slab, beam, lintel, chajja, fascia , circular column / structure, etc or any other similar description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc all complete as per direction of EIC.

Providing, laying and fixing pre- cast drain/ trench covers in reinforced cement concrete 1:1.5:3 (1cement, 1.5 coarse sand, 3 - 20 mm size graded stone aggregate of Bharatcoop, Dala, Jhansi) including necessary shuttering, sides and all edges finished and set at position with cement mortar 1:3 (1cemennt, 3 coarse sand) , suitable arrangement for lifting and placing at site, including labour, material, T&P etc. all complete as per direction of E.I.C.

Providing and laying Deformed or twisted steel reinforcement ISI mark TMT Bars of make RINL/SAIL/TISCON/Gallant advance or equivalent as approved by EIC, of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, T&P, wastage etc. all complete at any height as per drawing, specification and direction of E.I.C.

Providing, fabricating, fixing and removing, Form work / shuttering of side of concrete, foundation, footings, base of coloum, slab, lintel, beams side etc. for all type of RCC work in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden including all braces, struts, balli, etc, including working scaffoldings, ladders, wastage labour, material, T&P, transportation,etc. all complete as per specification and direction of E.I.C.

in sub-structure upto plinth beam e.g. column, footing, wall, plinth beam etc.

in Super-structure above plinth beam e.g. column, beam, cill, projection slab, slab, chhajja, fascia, fins, staircase etc or any description of works as per direction of EIC

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth etc all complete as required and directed by EIC.

Providing and laying class 'A' old size brick (having crushing strength 100 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) in foundation and superstructure, walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per direction of EIC.

Providing and laying brick work half brick thick walls in cement mortar 1:4 ( 1 cement :4 Coarse sand) with bricks of sub Class ‘A’ with minimum average crushing strength 100 kg/ cm² using well burnt locally available bricks , laid straight or curved on plan not exceeding 6.0M. Mean radius including placing of reinforcement at every fourth layer etc. including cost of all labours, materials, scaffolding, curing, racking of the jointsT&P etc complete at all heights as per specification, drawing and as directed by Engineer in charge.( steel reinforcement will be paid separately under Steel reinforcement item)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over

Providing and fixing 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, cutting wastage etc all com plete as reqruied and directed by EIC.

Providing and fixing M.S. grills of required pattern in frames of windows,Fixed to steel windows / ventilatros by welding etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Providing and fixing aluminium sliding door bolts 300x16 mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as required and directed by EIC

Providing and fixing aluminium tower bolts, 300 x 10 mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as required and directed by EIC

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as required and directed by EIC

Providing and fixing twin rubber stopper aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as required and directed by EIC

Structural steel work riveted, bolted or welded in built up sections, column/ strut/ trusses and framed work comprising of MS angle, MS flat, base plates, lugs etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.. at any height including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in positionand applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes of approved make, cutting, wastages etc all complete as required and directed by EIC.

Providing and fixing MS bolts including nuts and washers complete of required size and shape etc all complete as required and directed by EIC.

Providing and laying Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), in required size, shape, gradients, including finishing and provision of construction/ contraction joints etc all complete as required and directed by EIC.

Providing and laying Ceramic glazed floor tiles (antiskid) of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete as required and directed by EIC.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc all as required and directed by EIC

Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws etc complete all as required and directed by EIC

Ridges plain (500 - 600mm)

Gutter (600 mm over all girth)

Providing and fixing on wall face unplasticised Rigid 110 mm dia PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes etc all complete of approved make and as directed by EIC.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes - Bend 87.5°- for 110 mm dai pipes etc all complete of approved make and as directed by EIC.

Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls of rough / fair faces of brick wall / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per direction of EIC.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, on New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : including surface preparation, making surface smooth and even and labour, material, scaffolding, T&P etc all complete as per direction of E.I.C.

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives of approved make and colour pattern. - New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing and applying two coats of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian / Shalimar / Berger of approved tint and shade over a coat of suitable primer for respective surface primer of above brand ,including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching including labour material T&P, wastage etc all complete as per specification & direction of EIC.

Preparation of surface with applying average 1mm thick approximately birla putty before applying painting on wall including sand papering for smoothing of surface to achive even surface with all labour material T&P etc.all complete as per specification and direction of E.I.C.

Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required etc all complete as required and directed by EIC.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-., in (a) White Vitreous China Wash basin size 550x400 mm oval or normal shape counter mointed as approved by EICwith a 15 mm CP Brass single hole basin mixer etc cluding the cost of all approved materials,labour, wastages,testing,T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers all complete with labour, material, T&P etc and as per direction of EIC.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :.Range of Single half stall urinals with 10 litre P.V.C. automatic flushing cistern

Providing and fixing PTMT Bottle Trap for Wash basin and sink.:Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms etc all complete as required and directed by EIC.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.-450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing 20 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes,Concealed work, including cutting chases and making good the walls etc. having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing C.P. brass, 15 mm dia C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. of approved make etc all complete as requried and directed by EIC

Providing and fixing C.P. brass stop cock (concealed), 15 mm dia nominal bore of standard design and of approved make conforming to IS:8931. etc all complete as requried and directed by EIC

Providing and fixing in position 15 mm dia nominal bore CP brass angle valve of approved quality for basin mixer and geyser points of approved quality conforming to IS:8931 etc all complete as required and directed by EIC.

Providing and fixing in position PTMT circular type grating 100 mm nominal bore of approved quality and colour etc all complete

Engaging / Hire charges form Hydraulic Excavator (3D)/JCB with driver and fuel etc all complete as required and directed by EIC

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm or 25 x 25 or size as per site requriement and directed by EIC or other suitable size welded wire mesh to be fixed & firmly anchored to the concrete surface/ ms members by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.

Above