REPAIRS TO ROOF TREATMENT, ROOF COVERING AND PPGL SHEETS AND CONNECTED ITEMS AT ARTY CENTRE UNDER GE NASIK ROAD.

Amount

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

M&L for rendering 15 mm thick cement plaster on than fair faces of brick work or concrete surfaces in CM 1:4 rendering is to be finished even and smooth without using extra cement adding water proofing compound 3% by weight of cement (water proofing compound shall be measured and paid separately)

M&L for rendering 15 mm thick (1: 6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M&L for preparation of new surfaces ,cracks of any size and depth filling with POP or by plastering and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for preparing plastered of new surfaces ,cracks of any size and depth filling with POP or by plastering and applying two coats of oil bound distemper over one coat of primer including preparatory work with including and applying 3mm thick wall care putty to distempering on surfaces of walls complete all as specified and directed by EIC.

S&F in repairs plastic seat cover coloured closed pattern with flat bottom and cover with mild steel chromium plated or alluminium hinging device.

S&F in repairs Stainless steel sink 1.0 mm thick sheet for kitchen or laboratory with plugs, washers and wastes, including fixing cantilever brackets and conecting union to pipe, overall size 495mmx420mm bowl size 410mmx3330mmx200mm all as specified and directed

S&F in repairs PVC valveless, syphonic action type 10 ltr capacity flushing cistern, lowlevel, white or coloured, with inlet, ball valve,float and handle including brackets.

S&F in repairs Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S&F in repairs chromium Plated cast copper alloy pillar tap with capston heads fixed to iron pipes 15mm dia..

S&F in repairs bib tap 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

S&F in repairs brass chromium plated tublar towel rail 'D' shape 20mm dia 600mm long.

S&F in repairs Angle cock 15mm bore Chromium plated fancy type with crutch or butterfly handle fixed to iron pipes.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm dia with stainless steel wire stapples/GI screws/wooden beadings

S&F in repairs for chromium plated fancy shower rose with or without swivel joints of 65mm size

S&F in repairs 15mm bore dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F chromium plated grating of size up to 100mm

S&F in repairs PVC connection 15mm size with brass nut of 450mm long size

S&F in repairs stop valve , chromium plated fancy typewith long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe of bore dia 15 mm or for union.

S&F in repairs hand shower (Health faucet) 1 Mtr PVC tube with wall hook (CP)

S&F in repairs 8mm thick glass shelf "Corner" type size 250mm x250mm including necessary brackets front edge of glass rounded and woulded with one CP railing complete.

S&F in repairs jet sprey suitable for European type WC

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises .

Demolition of cement concrete concrete(un reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for 75 mm thick PCC 1:4:8,type D-2(using 40mm graded stone aggregate)as in sub base to flooring finished even and fair without using of extra cement all as directed vy EIC.

M&L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster 1:6.

M&L for Non Skid ceramic tiles 7 to 8 mm thick for joint free coloured tiles (square rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm , in floors etc, set and ointed in neat cement slurry and painted in coloured cement to match.

M&L for double charged vitrified ceramic tiles (any shade (light/dark) 8 to10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set & jointed in neat cement slurry and painted in white or coloured cement to match.Note : Shade will be deciced by Engr-In_Charge.

M&L for rendering 10mm thick Cement plaster 1:4 on fair faces of brick work or concrete surfaces as a backing coats for fixing tiles.

M&L for glazed ceramic tiles joint free coloured in vertical surface 300x200/300x450 6 to 7mm thick set and joint in neat cement slurry and pointed in colour cement to match (coloured tiles).

Dismantlling of stone slabs & tiles of any decsription or thickness in floors, aprons etc laid, bedded & pointed in any mortar.

S&F hand cut cudappa stone slab 16-18mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: Screed bed layer measured seperately complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 20mm thick.

M&L for Rounding to edges of stone slabs one edge such as in steps cooking platform and other similar work

S&F in repairs for vitreous china wash down WC Pan Pedestal pattern type including fixing.

S&F in repairs vitreous china wash basin Flat Bar 550x400mm excluding taps, chain and plug and porceilein stopper but incl brackets cutting for and pinning in ends of brackets or errecting stand, CP waste coupling of suitable size with long shank and bracket grouted in CM 1:2 in wall completed all as specified and directed.

Resecuring without taking down of chowkats or frame steel or wooden area n.exc 1.5Sqm each incl necessary repairs to hinges welding and nut/bolts etc all as specified and directed

Taking down PVC chowkat or frames with PVC shutters (without taking off shutters from the frame not exc. 1.5 Sqm each.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F staineless steel butt hinges 100mm size medium weight complete all as specified and directed

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

Taking up or down 15 mm dia tubes galvanized iron and connections and fittings or removal from site as incl cleaning for refixing where directed complete all as specified and directed.

All as per Item No.44.00 above but 20 mm dia

Re-fixing only 15 mm dia tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed complete all as specified and directed

All as per Item No.46.00 above but 20 mm dia

S&F 15 mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor complete all as specified and directed :-

All as per Item No.48.00 above but 20 mm dia

S&F of 75 mm dia PVC(SWR) pipes single socketed,in any length with rubber ring joints fixed to walls

All as per Item No.50.00 above but 110 mm dia

S&F of PVC(SWR) bends of 75 mm dia radius

All as per Item No.52.00 above but 110 mm dia

S&F in repairs Vitreous china urinal flat back ,full size of 680x343x270 white (minimum),with grating and union for discharge pipe (incl flushing cistern,flush pipe and waste pipe)

S&F Low density polyethylene pipes of Bore 32 mm of pressure rating 6 kgf/cm2 fixed complete to walls ,ceilings or in floors

Taking down chowkat or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each.

S&F Anodised powder coated aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat,Glazing clips,neopranes ribbin,rubber packing for fixing etc. complete all as specified and directed by Engr in Charge

S&F anodised powder coated aluminium Window shutters, sliding type without sash, aluminium section weighiging 0.55Kg/RM including necessary joining cleats, glazing clips, rubber neoprene packing, screws, suitable handles and suitable locking arrangement, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr in Charge

S&F Sheet glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F in repairs tubular rail curtain rod/towel rail, 20mm dia, brass chroium plated complete all as specified and directed by EIC.

S&F for brass chromium plated brackets for 20mm dia tubular curtain rod/towel rail complete all as specified and directed by EIC.

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. And removing of the rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided for.

Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges.

M&L for 10mm thick plastering (screeding) in cement mortar 1:3 on concrete roof surfaces finished even and smooth without using extra cement and using Water Proofing Compound. Note : Water Proofing Compound shall be paid seperately.

Supply only intergral water proofing compound

M&L for Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. As under (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) A coat of hot blown type bitumen of grade 85/25, applied hot @ 1.50 kg/sqm (c) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (d) Painting the exposed APP membrane surface with bituminous paint @ 0.15kg/sqmequivalent make as approved by GE. Note : (a) (b) (c) and (d) material should be same make.

Dismantling asbestos cement (corrugated,semi corrugated)sheets in roof covering

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and making good to wall and roof joint.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, or M S tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge

M&L for preparation of new steel surfaces and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, girth or width exc 10cm

M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directd

NOTE: - AMOUNT OF SCHEDULE OF CREDIT RS. 18259.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Vinod Enterprises

Alpha Construction

Srujan Associates

UNITED ENTERPRISES

M/S SAMEER SUBHASH PATANI

Vishal Constructions

MANOVANDANA CONSTRUCTION

Bidder Name

Vishal Constructions

M/S SAMEER SUBHASH PATANI

Alpha Construction

UNITED ENTERPRISES

Vinod Enterprises

Srujan Associates

M/S R.K.S. CONSTRUCTION

MANOVANDANA CONSTRUCTION