Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.9 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹33.0 L+₹1.3 L (4.13%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹33.1 L+₹1.4 L (4.56%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹33.2 L+₹1.5 L (4.89%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹34.4 L+₹2.8 L (8.82%)Rejected-Finance 100 FT ROAD BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
16 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF)B/R Chakeri, Kanpur
GE(AF)B/R Chakeri, Kanpur
REPAIR REPLACEMENT OF AC GALVALUME/CGI SHEET APP MEMBRANE AND CONNECTED WORKS IN N4 NARENDRA GROUND RAMA DEVI AREA AT AFS CHAKERI KANPUR
2023_MES_581686_1
GE(AF)/CHK/T-64 OF 2022-23 8859/E8
Open Tender
Civil Works
Item Rate
330 days
GE(AF)B/R Chakeri, Kanpur
As per tender documents
8 documents required · 8 mandatory
₹500
GE(AF)B/R Chakeri, Kanpur
₹90,000
Yes
28 Mar 2023
17 Feb 2023
23 Mar 2023
17 Feb 2023
16 Mar 2023
4 Mar 2023
Amount
Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing) complete all as specified and directed.
Demolition of cement concrete in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:3 Mixed with water proofing compound on fair faces of brick or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
M & L for two coats of master seal 550 of Sika/pidilite/Dr Fixit/Asian to prevent leakage/ seepage through sunken floor over prepared surfaces complete all as specified and directed.
M&L cement concrete 1:5:10, type E2 using 40mm graded stone aggregate as in filling mass concrete complete all as specified and directed.
M&L 25mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded aggregate) as in sub base for floor complete all as specified and directed.
M&L non skid ceramic coloured digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed or bedding in CM 1:6 complete all as specified and directed.
All as per item No 7.00 here-in-before but using as skirting/dado but over and including 10 mm thick cement plaster as backing coat in CM 1:3 complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as directed.
M&L screed bed or bedding layer or mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.
M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills cooking platforms and like in cement mortal (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges complete all as specified and directed.
Taking up or down 15 mm bore steel tubing complete all as directed.
All as per item No 12 here-in-before above but 20mm bore of pipes.
S&F 15 mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed.
Re fixing of 15 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors complete all as directed. Note:- Old GI pipe obtained from item No 12 shall be used after cleaning
S&F steel water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Re fixing of 20 mm bore steel water tubing and connections in new or old positions to wall and ceiling or laid in floors complete all as directed. Note:- Old GI pipe obtained from item No 13 shall be used after cleaning
Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:3 ,cutting depth not exc 10 cm girth as directed.
S&F in repairs grating round of size 140 mm dia of PTMT complete all as specified and directed.
S&F PVC waste pipe 32 mm bore for WHB/sink of Make-Prayag or equivalent in Cera/Essco, all as specified and directed.
S&F in repairs brass chromium plated towel rail of 600 mm long with end bracket both sides complete all as specified and directed
S&F in repairs Soap dish, vitreous china white, approximate size 160x160x90mm complete all as specified and directed.
S&F in repair 32 mm dia low density polyethylene pipes with bends etc as required (LDPE) of pressure rating 6 kg/sqcm, fixed to wall, ceilings or in floors etc complete all as specified and directed.
S&F in repair fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-105 gms) complete all as specified and directed.
S&F in repair fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-120 gms) complete all as specified and directed.
S&F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and directed.
S & F in repair Swivel shower/shower arms of PTMT any colour for fixing with 15 mm pipe, (Minimum weight 40 grms), complete all as specified and as directed.
S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 or 600 mm complete all as specified and directed.
S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required re connecting and refixing in position of exc 250 & n.exc 500 liters capacity complete all as directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc exc 250 & n.exc 500 liters of capacity complete all as directed. Note :- Date of cleaning shall be written on tanks by using stencil letters with 10 cm high from synthetic enamel paint.
M&L in repairs PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed to with WC including PVC flush pipes ,brackets complete all as specified and directed.
S&F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed .
S&F in repair vitreous china squatting pan `Orissa ' pan pattern size 580x440mm white `P' or `S' trap front back inlet ( excluding flushing cistern and flush pipes) complete all as specified and directed.
S&F 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc complete all as specified.
S&F in repair vitreous china wash hand basin white size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified.
M&L for cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate ,75mm dia outlet complete all as specified .
S&F in repair cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors using sand cast CI pipes 75mm bore pipes etc complete all as specified and directed.
All as per item No 38 here-in-before above but for 100 mm bore.
S&F 75 mm bore, cast iron bends any radius complete all as specified and directed.
S&F 100 mm bore, cast iron bends any radius complete all as specified and directed.
S&F in repair PVC internal kit for automatic symphonic action type low level flushing cistern of capacity 10 liters complete all as directed.
S&F in repair lid for PVC tank for 500/1000 liter capacity of tank with complete arrangements complete all as specified and directed..
Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as directed.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.
Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.
S & F PVC hinges of 100 mm long complete all as specified and directed. Make: Prayag or equivalent as approved by GE.
S & F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.
S & F 150 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.
S&F in repairs sheet glass shelf assembly cosnsisting of 5.5mm thick sheet glassshelf 12Cm wide with chrmium plated bracket guard and railing 60cm long complete all as specified.
Taking down/removing of existing water proofing treatment on roof surfaces and wall surfaces complete, including screed bed, mud phuska, PCC, etc racking out joints, hacking for key scrubbing down with water etc, and removing rubbish out of MD land.
M&L for screed bed 15 mm thick (average) plaster on concrete surfaces in CM 1:4 on roof, mixed with water proofing compound @ 200 ml/per bag of cement) and finishing the surface even and smooth without using extra cement complete and directed.(Note :- Water proofing compound shall be measured and paid separately under relevant items of Sch 'A' given here-in -after)
M & L for spreading / brushing neat cement slurry with 3.00 Kg/ Sqm on old concrete surface all as directed.
M & L PCC type B0 (1:2:4) (using 12.5 mm graded stone aggregate) for padding concrete as on roof, mixed with water proofing compound @ 200 ml per bag of cement complete all as specified and directed. (Note :- Water proofing compound shall be measured and paid separately under relevant items of Sch 'A' given here-in -after)
M&L water proofing treatment on horizontal or vertical surfaces with provision of oil bound bitumen primer @ 0.50 Kg/ Sqm and providing 3 mm thick, APP modified water proofing membrane weighing not less than 3.50 Kg/Sqm reinforced with non-oven polyester fabric weighing not less than 160 gm /Sqm all as per detailed specifications, sealed with overlaps shall be with torch application and applying two coats of aluminium reflective paints complete all as specified and as directed.
Supply only liquid water proofing compound of Make Pidilite/Dr Fixit/Sika, all as specified and directed. Note: Ratio of WPC with cement shall be as per manufacturers instructions.
M& L repair to chajja area n exc 2 sqm each including plaster in CM(1:3) or PCC type B0 (1:2:4) (using 12.5 mm stone aggregate) on top with WPC, benching/haunching,repair to broken plaster with dubbing coat complete all as specified and directed.
M& L repair to chajja area exc 2 Sqm and n exc 4 sqm each including dismantling of upward facia,cutting of reinforcement , plaster in CM(1:3) or PCC type B 0(1:2:4) (using 12.5 mm stone aggregate) on top with WPC, benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed.
M&L for repairing of damaged portion of mouth at terrace / roof surface of rain water pipe by cleaning and repairing to mouth of RWP by using CM (1:3) with mix with liquid WPC & sealed with 85/25 hot blown grade bitumen complete to make joint of rain water pipe and roof surface fully leak proof complete all as specified and directed
M&L cleaning of roofs by getting out growing vegetations / grass & brooming down with removing it out of MD land premises of including repairing to damaged surface of roof by using CM (1:3) with mixed with WPC & sealed with 85/25 hot blown grade bitumen complete in patch not exceeding 2.0 Sqm each complete all as specified and directed.
Dismantling asbestos cement or steel sheeting (corrugated, semi-corrugated, etc) sheets in roof coverings complete all as directed.
S&F for coloured pre printed galvalume profile sheet in roofing aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 MPs as in roof covering/cladding to walls, fixed with self tapping screws as speficified. . The contractor shall submit manufacturer test certificates for the chemical and mechanical properties, confirming genuinity of material including base metal thickness must be submitted for approval to GE prior to the installation/fixing.
S&F for coloured pre printed galvalume profile sheet in roofing aluminium zinc coated GI based plain steel sheet 0.50 mm thick having tensile strength of 550 MPs as in hips, valley gutter , drip , ridge etc fixed with self tapping screws as speficified. The contractor shall submit manufacturer test certificates for the chemical and mechanical properties, confirming genuinity of material including base metal thickness must be submitted for approval to GE prior to the installation/fixing.
S&F 1.00 mm thick plain, galvanised mild steel sheeting, in steel gates, ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
M&L 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc, fixed with L- type or J type hook bolts complete all as specified and directed.
All as per item No 66 here-in-before above but except sheeting.
Dismantling stee work of any description
S&F for flat iron 40x6mm as in claps, holding of valley gutter, hold fasts, wall ties including nut and bolts etc all as specified.
S&F roof trusses (framed) , trussed, purlin, crane , gantries, rail and fastening and heavy bracket framing ( Beam, tee, angle , channel or flat sections ) including distance pieces, cleats etc Fe-290 Gde E-165 all as specified and directed by Engineer-in- Charge.
S&F for mild steel angles or other sections with, complete drilled for fixing as in wall, steps ,riser, nosing etc fastening and fixing of Fe-410W(Gde-E-250) quality 'A', complete all as directed.
S & F plain colour PVC sheet chajja/ sunshade roof consisting of 3mm thick plain colour PVC sheet inclusive on wall with grouting nut bolts with angle iron, frame for sunshade as per specifications as directed at site. Note:- Angle iron shall be measured and paid separately.
M&L for 75 mm thick cement concrete (1:3:6) type C-2, using 20 mm graded stone aggregate as in plinth protection etc complete including finishing even & smooth without using extra cement, all as specified and directed.
Demolition of brick work built in cement or cement lime mortar including all quoins, arches, pillars complete all as specified as directed.
M&L brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.
-ditti- as per item No 75 above except bricks Note: Old bricks obtained from item No 74 shall be reused after cleaning.
Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc., all as directed.
M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished fair and even without using extra cement complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick or stone masonary in CM (1:6) finished fair and even without using extra cement complete all as specified and as directed.
M&L for rendering 10 mm thick after dubbing out average 10 mm thick on irregular face of ceiling in CM 1:4 on ceiling, finished even and fair without using extra cement, including chicken wire mesh fixed with nails or screws etc complete all as specified and directed.
M&L for preparation of new undecorated surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer and 1mm thick wall care putty, all as specified and directed.
M&L for preparation of surfaces new plastered surfaces and applying two coats of cement based paint over a coat of primer on walls all as specified and directed.
M&L for preparation of surfaces and applying three coats of white wash on ceilings, all as specified and directed.
S&F in repairs PVC (SWR) pipe, 110 mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
All as per item No 84 here-in-before but 75 mm dia.
S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.
S&F PVC (SWR) 75 mm bore vent Cowl complete all as specified and directed.
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
S&F PVC (SWR) junction single (Single T) equal or unequal with access door 75mm bore complete all as specified and directed..
S&F in repairs rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction hoisted & fixed in position complete all as specified and as directed.
Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality in squares n exc 0.50 Sqmtr each pane and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed.
S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.
S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with steel wire staples, completed all as specified and directed.
M&L preparation of OLD painted wooden /wood based surface of any description exc 10 cm width or girth by washing down with solution of alkaline soap to remove all loose dirt and oily & grease spots and applying ONE coat of synthetic enamel paint complete all as specified and directed. Note :Bidder shall be considered height of bldgs upto 4 storey while quoting rates by them . Cost of scaffolding wherever required shall deemed to be included in the quoted rate.
All as per item No.95 above but on steel surfaces
M&L for 40mm thick PCC (1:2:4) type B-1 as in flooring using 20 mm graded stone aggregate cement concrete finish even and smooth using extra cement complete all as specified .
S& F for 38x 3mm plastic dividing strips, as in flooring all as specified and directed.
M&L for preparing OLD plastered or unplastered surface of wall and applying ONE coat of acrylic distemper oil emulsion over coat of primer for smooth finish complete all as specified and directed by the Engr -in-Charge
Providing and laying 60 mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawn, drive ways or light traffic parking etc, of required laid over 50 mm thick compacted bed of fine sand, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for plain cement concrete type B1 (1:2:4) (using 20 mm graded stone aggregate) around the interlocking tiles complete all as specified and directed.
S & F in repairs 18 mm thick 100% Lead free both side plain laminated PVC/WPC sheet of any colour with using sunmica of choice colour on both side for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. The panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bent finish as per manufacturer's instruction and make approved by GE complete all as specified and directed. Note : All fittings and fixtures such as Soft closer, handles, piano hinges, hydroulic SS hinges etc for shutter should be included rated quoted by the contractor.
B.K.TRADERS
P.N. BROTHER
SHASHI CONTRACTORS
KAMAL TRADING CO.
aarohi nirman company
M/S SDS Construction Co.
DHARM ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .