WBPWD/SSEWEC/BRED /NIQ-25/2025-26

(xi) Car enclosure & False ceiling - stainless Steel [ 20SWG ] 304 hairline finish with hand rail, (xii) Over Travel : - 4800 mm approx, (xiii) Indicator : - Monochrome LCD -Blue Background & White font Dot matrix (LED) Scrolling Display (xiv)car dimension : - 1500mm W x 2400mm D x 2400mm height or as per IS code for 24 passanger. (xv) Car door:- 304 SS centre opening automatic door provided without vision panel with V3F controlled door drive system . Doors should be minimum 2 hr fire rated, (xvi) Landing doors : hairline finish centre opening automatic door provided without vision panel with V3F controlled door drive system. (xvii) Clear door opening : Minimum 1200 mm x 2100 mm height (xviii) Door detector systems : Full length photocell assembly light curtain sensor, (xix) Overload protection : - On overloading the Lift car will not start with door remaining open and audio & display Indication , (xx) Emergency light & alarm : - Rechargeable battery operated alarm bell and emergency light .

(xxi) Leveling accuracy : - ±5 mm (xxii) Automatic rescue device : Battery operated ARD for automatic evacuation to the nearest floor In case of both power failure and single phasing xxiii ) Main rope ( STM ) / Belt - as per manufacturer ' s standard . (xxiv) Car fan : Lift car provided with fan with provision of getting automatic switched off in case of having no call . (xxv) Car flooring : Decorative granite flooring of EIC approved colour ( in lift company ' s scope ) . (xxvi) Fire Man's switch : To be provided at ground floor landing / lobby . (xxvii) Home landing: Car will automatically come to the preset home landing when there is no call , (xxviii) COP & LOP : - 01 no. COP ( with start / Floor button ) and 3 nos LOP, suitable for ( B + 2 ) floors with luminious push up / down , call registration Indicator digital position Indicator, SS face plate etc . (xxix) Voice Anounciator : Automatic floor position announcement system. (xxx) Intercommunication System - 2 way

(xxxi) Ventilattion: Cross Flow fan (xxxii) Hand Rails: Steel Powder Painted Black Handrails on rear car panels (xxxiii) Hall Fixtures: Pan Type Fixture (xxxiv) Hall Fixture Face Plate: Stainless Stell Hair Line Finish (xxxv) Hall Button Arrangement: LCD Monochrom type (xxxvi) Standard Features: Anti-nuisance Car call protection, Overload Device, Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of loby & Parking, Door Open /Close Button, Manual Rescue Operation, Belt Inspection Drive, Auto Fan cut off. [Make - OTIS / SCHINDLER / KONE] (category -I) [NS]

(vi) Control : - Microprocessor based AC with V3F control ( with close loop ). (vii)Operation : - Simplex full collective ( with Auto / attendant mode ), (viii) Machine Energy efficient machine unit suitable for 15 passenger lift without gear and without M/C room, PM Gearless(Located in shaft on top of guide rails) (ix)Clear shaft dimension ( Available ) : - 1700 mm x 2750 mm[ Bidder should quote after visiting the site ], (x) Pit Depth:- 1600 [ Bidder should quote after visiting the site ],

(xi) Car enclosure & False ceiling - stainless Steel [ 20SWG ] 304 hairline finish with hand rail, (xii) Over Travel : - 4800 mm approx, (xiii) Indicator : -Monochrome LCD -Blue Background & White font Dot matrix (LED) Scrolling Display (xiv)car inside area : - 1000mm W x 2400mm D x 2200mm height or as per IS code for 15 passanger.. (xv) Car door:- 304 SS centre opening automatic door provided without vision panel with V3F controlled door drive system . Doors should be minimum 2 hr fire rated, (xvi) Landing doors : hairline finish centre opening automatic door provided without vision panel with V3F controlled door drive system. (xvii) Clear door opening : Minimum 900 mm x 2000 mm height (xviii) Door detector systems : Full length photocell assembly light curtain sensor, (xix) Overload protection : - On overloading the Lift car will not start with door remaining open and audio & display Indication , (xx) Emergency light & alarm : - Rechargeable battery operated alarm bell and emergency light .

(xxi) Leveling accuracy : - ±5 mm (xxii) Automatic rescue device : Battery operated ARD for automatic evacuation to the nearest floor In case of both power failure and single phasing xxiii ) Main rope ( STM ) / Belt - as per manufacturer ' s standard . (xxiv) Car fan : Lift car provided with fan with provision of getting automatic switched off in case of having no call . (xxv) Car flooring : Decorative granite flooring of EIC approved colour ( in lift company ' s scope ) . (xxvi) Fire Man's switch : To be provided at ground floor landing / lobby . (xxvii) Home landing: Car will automatically come to the preset home landing when there is no call , (xxviii) COP & LOP : - 01 no. COP ( with start / Floor button ) and 3 nos LOP, suitable for ( G + 2 ) floors with luminious push up / down , call registration Indicator digital position Indicator, SS face plate etc . (xxix) Voice Anounciator : Automatic floor position announcement system .

(xxx) Intercommunication System - 2 way (xxxi) Ventilattion: Cross Flow fan (xxxii) Hand Rails: Steel Powder Painted Black Handrails on rear car panels (xxxiii) Hall Fixtures: Pan Type Fixture (xxxiv) Hall Fixture Face Plate: Stainless Stell Hair Line Finish (xxxv) Hall Button Arrangement: LCD Monochrom type (xxxvi) Standard Features: Anti-nuisance Car call protection, Overload Device, Nudging, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Extra Door Time of loby & Parking, Door Open /Close Button, Manual Rescue Operation, Belt Inspection Drive, Auto Fan cut off. [Make - OTIS / SCHINDLER / KONE] (category -I) [NS]