REPLACEMENT OF SUBMAIN WIRING FROM MAIN DBs TO SUB DB AND ASSOCIATED WORKS AT MD ACCN OTM ACCN UNDER THE JURISDICTION OF GE (A) JAISALMER

Amount

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-charge.

Taking down the existing unserviceable MCBs/MCCBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-charge.

Taking down of old unsv tubelight fitting /bulkhead/ garden light/ gate light of any descriptionlight fitting any type any watt complete all as specified and directed by Engineer-in-charge.

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 4.0 Sq mm (FRLS) and including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 4.0 sqmm cable & One run of 4.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)

M & L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 4.0 Sqmm (FRLS) existing concealed conduit or Surface conduit as per site requirement non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4.0 Sqmm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 4.0 Sqmm cable & One run of 4.0 Sqmm cable shall be paid as one unit length.)

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) and including PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 sqmm cable & One run of 6.0 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sqmm (FRLS) in existing concealed /surface conduit as per site requirement non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 6.0 Sqmm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 Sqmm cable & One run of 6.0 Sqmm cable shall be paid as one unit length.)

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 10.0 Sq mm (FRLS) and including PVC conduit non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 10.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 10.0 sqmm cable & One run of 10.0 sqmm cable and One run of PVC conduit shall be paid as one unit length.)

M&L for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 10.0 Sq mm (FRLS) existing concealed /surface PVC conduit as per site requirement non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 10.0 Sq mm (FRLS) of continuous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 10.0 sqmm cable & One run of 10.0 sqmm cable and One run of PVC conduit shall be paid as one unit length.)

M & L for submain wiring with approved colour code/as per IS (Red,blue & yellow for three phase) conduit circuit with one black colour single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 10.00 Sqmm (FRLS) for neutral in PVC surface conduit pipe suitable size including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 10.00 Sqmm (FRLS) of continous earth wire green in colour including taking down old u/s sub-main wiring complete all as specified and directed by Engineer-in-charge. (Note :- four runs of 10.00 Sqmm cable & one run of 10.00 Sqmm cable shall be paid as one unit length).

Supply and fixing of LED box type Integrated Batten Wattage 20 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Dimension of the Fixture Must not be less Then Length 1170 MM (± 5 MM ), Elegant Design, IP 20 Protection. Minimum Lumens output of the fitting shall be 2500 Lumens With Efficacy of 125 lm/W, CCT 5700 – 6500K, Surge Protector 4 KV, PF>= 0.95 , Necessary mounting arrangements. The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with Lm-79 / LM-80 / Test Report as per Crompton Cat No. – CCS-100-20-65-HL2-DP-NWH or Equivalent in Appx 'B' list of makes complete all as specified and directed by Engineer-in-charge.

Supply and fixing of LED box type Integrated Batten 40 watt having Aluminum Extruded housing in white powder coated Finish with high translucent PC Cover, Elegant Design, IP 20 Protection. Dimensions of the Fitting Shall be Not less then 1200 MM ( Length) X 40 MM ( Width ) X 63 MM ( Height ). Lumens output of the fitting shall be not less then 4400 lm, CCT 5700 – 6500K, buring hours 50,000 Surge Protector 4 KV, PF>= 0.95 , Separate detachable type Electronic constant current drivers for easy replacement and maintenance, THD < 10%, Necessary mounting arrangements .The fixture shall be suitable for wall mounting /suspension mounting as per site requirement . The Manufacturer of the fixture shall have in house NABL Accredited Lab and must produce certificate of the same along with LM-79 / LM80 / Test Report as per Crompton CAT PART NO Shelter . CIS -305-40-57-SL-DP-NWH or equivalent in Appx 'B'list of makes complete all as specified and directed by Engineer-in-charge.

S & F for LED tube light fitting 10 Watt, 2 Feet or 591 MM in length, IP 20 Protection, wall mounted type, Slim LED Batten with extruded aluminium housing and polycarbonate diffuser, elegant design with end caps, having excellent thermally managed polycarbonate extrution, LM 80 Certified LED having Integral Electronic Constant Current Driver, IP 20 Protection, Opreating voltage 240 V , 50Hz AC Supply and Operating tempraeture 0 to 50 C, Power factor ≥ 0.9, Lumen output ≥ 1000, necessary mounting arrangements on PVC Square box 2 Nos, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-charge.

Supply and fixing of recessed/ceiling mounted down lighter with CRCA housing with high bright LED,idealy suited for low ceiling areas Brilliance 36 Watt LED, size 2ft x 2ft The product features color tuning from 3000 K to 6500 K, necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with white color flexible pipe complete all as specified and directed by Engineer-in-charge.

S & F for LED downlight surface mounted luminare round type 18 watts with inbult driver and aluminium pressure die -cast housing with heat dissipating fins for larger surface area finished in epoxy powder coated white to driver high efficiancy light output and uniformity ,utilising edge lit technology and white finish operating voltage 230V AC, 50 Hz all as per Cat Part No LDSER-18-2 of Make- Havells/Orient / Philips or its equivalent including taking down old unserviceable existing light fitting of any description complete all as specified and directed by Engineer-in-charge.

S&F bldg security light fittings Wall mounted LED light 35 Watt including bracket made out of GI pipe (medium grade) 40mm, 1.20 metre long made to shape and fixed outside of the building by means of 2 No FI 40x6 mm clamps with suitable size of nuts, bolts, washers and connecting with three core copper flexible cable of size 1.50 Sq mm complete all as specified and directed by Engineer-in-charge.

S&F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 10 watts LED with necessary MS base box made out of MS sheet of 2 mm thick of suitable size abbended in PCC 1:2:4 base, elecrical connections with adequate size including removal of old unserviceable one complete as all specified and as directed. Make:Havells Cat part No Havells MOUNTBL10WLED830PSYMTOPMMA (0.6 M) or equavalent in Appx 'B'list of makes.

S & F for LED post top lantern/gate Light 40 watt light fitting made of die cast top housing must also be dia cast aluminium spigot housing with decarative acrylic diffuser with IP 65 protection complete with all accessories including removal of old unserviceable complete all as specified and directed. Make-Crompton Cat part No LPTO-40-WW-M orequavalent in Appx 'B'list of makes.

Supply and fix energy saving, environment friendly & robust Highbay/Mediumbay roof truss light LED for covered shed 150 W IP65 luminaire with high efficacy with fixing arrangement such as bracket,MS clamp,Nut bolts etc and connecting complete all as specified and directed by Engineer-in-charge. Make : Havells Cat No.SAUCERNEOP150WLED75790DTOLTG or equivalent in Appx 'B'list of makes. Note:- Fixing of light at any height arrangement of ladder should be provided by contractor.

S & F for MCCB DB VTPN 8 way 415 V double door IP 43 with provision for FP MCCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going complete prewired including Bus Bar capacity 250 A suitable for operation on 415 volt 50 Hz AC supply complete all as specified and as directed .Make : Legrand Cat pot No 507752 or equivalent in Appx'B'list of makes.

S & F for MCCB DB VTPN 4 way 415 V double door IP 43 with provision for FP MCCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going complete prewired including Bus Bar etc suitable for operation on 415 volt 50 Hz AC supply complete all as specified and as directed as per Legrand Cat pot No 507725 or equivalent in Appx 'B'list of makes.

S & F for sheet metal enclosure MCB DB TPN 4 way IP 43 with 200 Amps rated bus bar 415 volts double door with magnitic locking system complete all as specified and as directed Make : Legrand Cat pot No 507780 or equivalent in Appx 'B'list of makes.

S & F for sheet metal enclosure MCB SPN DB 12 way IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and as directed.Make : Legrand Cat pot No 507622 or equivalent in Appx 'B'list of makes.

S & F for sheet metal enclosure MCB SPN DB 8 way IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and as directed.Make : Legrand Cat pot No 507611 or equivalent in Appx 'B'list of makes.

S & F for sheet metal enclosure MCB SPN DB 4 way IP 43 with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified and as directed.Legrand Cat pot No 507610 or equivalent in Appx 'B'list of makes.

S&F sheet metal and neutral enclosure single pole with two pin and earth plug and socket single pole MCB 20 Amps 240 volts fixed complete all as specified and directed by Engineer-in-charge.

S & F MCCB 4 P 415 volts 16 KA suitable for fixing on VTPN DB of capacity 160 Amps with extended terminals complete all as specified and directed by Engineer-in-charge. Note:- Suitable size and frame of MCCB required as per existing DBs at site.Note MCCB Rating ICS=100 % ICU

S & F MCCB 4 P 415 volts 16 KA suitable for fixing on VTPN DB of capacity 125 Amps with extended terminals complete all as specified and directed by Engineer-in-charge. Note:- Suitable size and frame of MCCB required as per existing DBs at site.Note MCCB Rating ICS=100 % ICU

S & F MCCB 4P 415 volts 16 KA suitable for fixing on VTPN DB of capacity 100 Amps with extended terminals complete all as specified and directed by Engineer-in-charge. Note:- Suitable size and frame of MCCB required as per existing DBs at site.Note MCCB Rating ICS=100 % ICU

Supply and fixing 415V 10 KA 'C' curve miniature circuit breaker (MCB) of tripple pole and neutral rated capacity TPN 63 To 100 Amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

Supply and fixing miniature circuit breaker (MCB) of single pole and neutral SPN 40 to 63 AMP 240V, 10KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

Supply and fixing miniature circuit breaker (MCB) of single pole SP 10-32 AMP 240V, 10 KA 'C' curve in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

Supply and laying of 1100 volts grade heavy duty service cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm 2 Core including PVC conduit pipe nominal cross section in service connections including removal of old unserviceable one complete all as specified and directed by Engineer-in-charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 Volts grade with stranded aluminium condutor of size 10 sq mm 2 core including removal of old unserviceable one complete all as specified and directed by Engineer-in-charge.

Attending of internal electrical Supply Complain, No light complain, repair/maint and making the continuity of supply after rectifying the defects of the electrical items such as Main DB's, switches, sockets, fan regulator, replacement of MCB (light/power), lamp holders (bracket/ batten), bell/buzzer, push button, ceiling rose, tube light fitting any type single pole/double pole, switch socket and plug combined, tube light fitting any type and other similar electrical items/fittings etc. including providing of small pieces of electrical wire of size 1.5 sqmm to 10 sqmm single core and length not exceeding 0.50 mtrs complete all as specified and directed by Engineer-in-Charge. Note :- (i) Contractor will arrange minimum 2 well experienced electrician and 2 experienced helper to attend repair of internal electrical system at site as required by Engr-in-Charge .

Note :- Complain should complete the assigned job within 48 Hrs after receipt of the assignment. If the contractor fail to completed the assigned job in the given time recovery will be made Rs. 50.00 @ Per Job.Non reporting of trademen : 300/- per elect /Helper 200/- per helper per day .Providing of safty equipments to the electrician/labour will be responsibility of the contractor . Details of repair to be collected throughout the contract period from JE E/M at 0900 Hrs from office located at Mil stataion Area. Register of repair should be prepared by the contractor and details of repair to be updated in the register after completion of every repair work. Contractor will arrange vehicle, electrical tools, folding ladder, misc item like insulation tape, screws, nuts and bolts for repair work.

S&F in repair of Switch modular 6 Amps single pole, one way as per existing pattern complete all as specified and directed by Engr-In-Charge.

S&F in repair of of modular Socket outlet, multi purpose, 6 Amps 3 pin combined 2 module as per existing pattern complete all as specified and directed by Engr-In-Charge.

S&F in repair of modular Bell push 6 Amps 1 module as per existing pattern complete all as specified and directed by Engr-In-Charge.

S&F in repair of modular Socket 16 Amps, 5 pin combined 2 module as per existing pattern complete all as specified and directed by Engr-In-Charge.

S&F ir repair of modular Switch 16 Amps one way 1 module as per existing pattern complete all as specified and directed by Engr-In-Charge.

S&F in repair of Switch modular 6 Amps two way, 1 module as per existing pattern complete all as specified and directed by Engr-In-Charge.

S&F in repair of switch piano flush type single pole, one way 5 amps, 230 Volts complete all as specified and directed by Engg-in-charge.

All as per item No.42.00 above but 5 Amps, 2 way complete all as specified and directed by Engg-in-charge.

S&F in repair of socket outlet flush type 5 Amps, 3 pin, 230 Volts as per IS complete all as specified and directed by Engg-in-charge.

S&F in repair of switch socket combination flush type 2 in 1, 5 Amps, 230 Volts complete all as specified and directed by Engg-in-charge.

S&F in repair of switch piano flush single pole one way 15 Amp 230 volt complete all as specified and directed by Engg-in-charge.

S&F in repair of socket outlet flush type multipurpose 2 in 1, 5 pin 5 and 15 Amp, 230 volts complete all as specified and directed by Engg-in-charge.

S&F in repair of switch socket combination flush type multipurpose 2 in 1, 3 pin, 5 and 15 Amp, 230 volts complete all as specified and directed by Engg-in-charge.

S&F in repair of bell push single pole, 5 amps, 230 Volts, flush type complete all as specified and directed by Engg-in-charge.

S&F in repair of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engg-in-charge.

S&F in repair of Fan regulator, step type, flush type, 230 volts 50Hz single phase, piano type, complete all as specified and directed by Engg-in-charge.

S&F in repair of modular fan regulator 5 step type, 2 module as per existing pattern complete all as specified and directed by Engr-In-Charge.

S&F in repair of PVC insulation Tape roll 20mm width and 8 metre in length for electrical wire colour code red, yellow, blue & black joints complete all as specified and directed by Engg-in-charge.

S&F in repair of buzzer,Ding Dong,AC, 230 Volts,single pole complete all as specified and directed by Engg-in-charge.

M/L for repair/refixing of loosely hanged PV/steel conduit, PVC casing & caping of any type, size by means of shadles, clamps screwes to existing wall/ceiling and making good in all respect incl wiring inside all as shown specified and directed by Engr-in-Charge.

S&F in replacement of PVC conduit pipe of 20mm dia including tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed by Engg-in-charge.

S&F of in repair plastic laminated bakelite sheet cover of hylem 2.8 mm thick including cutting holes for switches, sockets etc as pre requirement including fixing with brass machine screws and washer complete of following sizes:-

(a) 10" x 12" size

(b) 7" x 4" size

(c) 4" x 4" size

S&F in repair of modular white cover plate with frame inner and outer plates as per existing pattern complete all as specified and directed by Engr-In-Charge for following sizes:-

(a) 2 modules

(b) 3 modules

(c) 6 modules

(d) 12 modules

SHREE BHAGWATI ENTERPRISES

Shri Maruti Trading Co.

Aman Enterprises

new india engineers

SHRI HARI CONSTRUCTION

M/S SHRI HARI CONSTRUCTION COMPANY