Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.6 LAccepted-Finance VILL BONOGRAM PO RANDIA P S BUDBUD DIST BURDWAN PIN 713120 WB | BURDWAN | BURDWAN | WEST BENGAL | 713120 | L1 | Accepted-Finance LOWEST RATE QUOTED | |
| 2 | L2₹49.9 L+₹3.4 L (7.28%)Rejected-Finance | L2 | Rejected-Finance HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹51.2 L+₹4.6 L (9.95%)Rejected-Finance BIDHAN NAGAR MANKAR ROAD PO PS BUD BUD DIST PURBA BARDHAMAN PIN 713403 | BUD BUD | PURBA BARDHAMAN | WEST BENGAL | 713403 | L3 | Rejected-Finance HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹52.2 L+₹5.7 L (12.1%)Rejected-Finance | L4 | Rejected-Finance HIGHER RATE QUOTED THAN L1 | |
| 5 | L5₹52.5 L+₹6.0 L (12.8%)Rejected-Finance VILL BUD BUD PO BUD BUD PS BUD BUD DIST PURBA BARDHAMAN PIN 713 403 WB | BUD BUD | PURBA BARDHAMAN | WEST BENGAL | 713403 | L5 | Rejected-Finance HIGHER RATE QUOTED THAN L1 |
Tender Value
Refer Docs
EMD Value
₹93,800
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2024_MES_664916_1
8500-133/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
As per Tender documents
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹93,800
Yes
12 Sept 2024
9 Jul 2024
4 Sept 2024
9 Jul 2024
3 Sept 2024
14 Jul 2024
Amount
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for cement concrete in PCC 1:3:6, type C1(using 20 mm graded stone aggregate) as in foundation filling and mass concrete for post holes complete all as specified and directed.
M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius build in CM (1:6) complete all as specified and directed.
M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregate) as in coping finished even an fair complete all as specified and directed.
M&L for Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete surfaces finished and smooth without using extra cement and using water proofing compound admixture as per manufacturer's instruction, complete all as specified and directed. Note :- WPC will measuered and paid separatly under relevant item of schedule.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out in soft/loose soil complete all as specified and directed.
S&F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars,for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire,etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.
Supply only 3mm dia Hot dipped electrogalvanised coating chain link fencing wire mesh of size 75mmx75mm conforming to IS-2712-2003 having a tensile stregnth 400 to 500 Mpa. The mesh wire and line wire of the fabric shall be manufactured from ISI marked (Make-Tata wireon) galvanised steel confirming to IS-280:2006 (4th Revision). The Kunckled ends should be of at least 50% of the size of the square mesh. The wires used in fencing should be long lasting and resistnace to corrosion and testing criterial fullfill the requirement as per IS 1161:1998. Make : TATA/JINDAL/JAI BALAJI
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 10.00 mentioned above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed
S&F mild steel bolt having dia of neck exc 16mm but not exc 20mm purpose made with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagonal or square nut n.exc 5 cm long complete all as specified and directed.
M&L for preparation of surfaces of steel and iron of any description over 10cm in width or girth not other wise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer complete all as specified and as directed.
M&L for prepration of new plastered surfaces and applying two coats of cement based paint on walls complete all as specified and directed.
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for Hardcore using broken stone or boulders of gauge n.exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for Plain Cement concrete Type C2 1:3:6 (using 40mm graded stone aggregate) in foundations,filling and mass concrete complete all as specified and directed
M&L for brickwork with fly ash old sized bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:4) complete all as specified and directed
M&L for Providing cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping complete all as specified and directed
M&L for extra for forming fair finish drain channel 45 cm inner grith in cement concrete using extra cement complete all as specified and directed
M&L for PCC type D2 1:4:8 (using 40 mm graded stone aggregates) as in foundations, fillings and mass concrete complete all as specified and directed.
S&F Roof trusses (framed) of angle iron members trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc @150 GSM coating GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for Excavating over areas not exceeding 1.5 m deep and getting out in soft/loose soils complete all as specified and directed.
Removing excavated soil to a distance exc. 250 m but n exc. 500m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and as directed.
M&L for PCC (1:4:8) 100 mm thick Type D2 using 40 mm graded aggregate used as in sub base floor/pavings and finishing complete all as specified and as directed.
M&L for PCC M-25 (Design Mix) (not less than 150 mm thick) Type A1 using 20 mm graded aggregate used as in cement concretei in foundations, filling and mass concrete complete all as specified and as directed.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
Forming Contraction (Dummy) joints 65 mm deep x 10mm wide filled with sealing compound grade B complete all as specified and directed.
Forming Construction joint 45 mm deep x 10mm wide filled with sealing compound grade B complete all as specified and directed.
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M- 35 Grade with grey cement and pigments complete all as specified and as directed.
M&L for 75 mm thick cement concrete type C2 ,for PCC (1:3:6) using 40 mm graded aggregate used as in sub base, sub floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and as directed.
M&L for fixing PVC (SWR) pipes of 110 mm bore diameter single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
M&L for extra for forming fair finish drain channel 30 cm inner grith in cement concrete using extra cement complete all as specified and directed.
M&L for reparing new surfaces of walls plastered and white washing with three coats of white wash on walls complete all as specified and directed.
M&L for PCC (1:4:8) Type D2 (using 40 mm graded stone aggregate) used as in sub base floor/pavings and finishing complete all as specified and as directed.
M&L for reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed.
M&L for reinforced cement concrete (Design Mix) M-25 (20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) as Chajjas complete all as specified and directed.
M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surfaces of concrete complete all as specified and directed
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified and directed
M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished flat surface for fair finished surfaces of concrete complete all as specified and directed
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed
M&L for old size brickwork with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed
Supply only liquid Water proofing compound complete all as specified and directed (Makes : pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for Rendering 15 mm thick cement plaster in CM 1:6 on other than fair faces of brick/concrete work surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed..
M&L for prepration of newly plastered surfaces of wall and applying two coat of oil bound distemper over one coat of chalk whiting primer complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster in CM 1:4 on brick or concrete surfaces complete all as spd and directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge
S&F tubular towel rail brass chromium plated 20 mm dia `D' type 60 cm long between flanges complete all as spd and directed.
S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing.
S&F 75 mm size butt hinges extruded aluminium alloy/Stainless steel with galavanised mild steel hing pin anodised and fixed type C-21 complete all as specified and directed.
S&F 150 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed
S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed
S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specification complete all as specified and directed
S&F sheet glass 4 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 sqm in each pan in wooden frame/steel framecomplete all as specified and directed.
S&F vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed.
S&F 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets). Make- Hindware, Parryware, commander (Sim Line) incl flush pipe of plyethene of low or high density of PVC 32mm dia for low level cistern all as specified and directed.
S&F vitreous China wash basin white, flat back,size 550X450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white minimum), with grating and union for discharge pipe(back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed.
S&F Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed.
S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed
S&F stop valve /angle valve cast copper chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and directed.
S&F in CP Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed
S&F in CP Grating square with hole 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed
Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed
S&F PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and directed
S&F soap dish, vitreous china white, approximate size 160mm x 160mm x 90mm complete all as specified and directed
S&F PVC (SWR) floor trap 75mm dia of outlet plain with grating including jointing with solvent cement complete all as specified and directed
S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint, laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed
S&F PVC (SWR) junction single (single T) equal or unequal of 75 mm dia complete all as specified and directed
S&F for PVC (SWR) vent cowl 75 mm bore complete all as specified and directed
S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed
S&F for PVC SWR bends of 110 mm bore complete all as specified and directed
M&L for Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed
S&F for 20 mm outer dia medium grade CPVC, SDR 11 & plain CPVC SDR 11 with all fittings (brass inside the fittings) and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
All as per item No 85.00 above but 25 mm outer dia complete all as specified and directed
S&F for gun metal gate valve, 20 mm bore, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions all as specified and as directed.
M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) fininshed the as in plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates (Fe 410-W (Gde -E-250) quality A complete all as specified and directed
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A complete all as specified and directed
S&F mild steel screws bolts 5 to 10cm dia (machine made) with hexagonal or square heads at one end and screw the other or screwed both end to be fitted with wahsers and on hexagonal or square n.exc 5 cm long complete all as specified and directed
M&L for laying Reinforced concrete pipes 150 mm in dia, class NP2, laid and jointed complete with collars complete all as specified and directed
M&L for Concrete bed to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 (using 40mm graded stone aggregate) complete all as specified and directed.
M&L for Cutting into existing manholes 150mm dia pipe for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as specified and directed
M&L for precast cement concrete Type B-1,1:1.5:3 (using 20mm graded crushed stone aggregates) set in cm 1:4 as in mahhole cover etc complete all as specified and directed
S&F of high pressure PTMT float valve with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 25mm bore dia with fly nut complete all as specified and directed
S&F 500 Ltr capacity Rotational /moulded Polyehtylene water tank (Cylindrical vertical with closed top minimum three layer) hoisted including dismantling & fixed in position all as specified directed Make : Vectus/Sintex/Prayag
S.P.S. SUPPLIERS (BID ID -3073272)
S.D.ENTERPRISE (BID ID -3073427)
M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION (BID ID -3078094)
SANJAY KUMAR SUPAN (BID ID -3073546)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .