Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹10.8 L+₹1.1 L (11.2%)Accepted-AOC | L2 | Accepted-AOC Other than lowest bid | |
| 3 | L3₹11.3 L+₹1.5 L (15.9%)Accepted-AOC | L3 | Accepted-AOC Other than lowest bid | |
| 4 | L4₹11.4 L+₹1.6 L (16.7%)Accepted-AOC | L4 | Accepted-AOC Other than lowest bid |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
17 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS
GE 874 EWS C/O 56 AP
COMPREHENSIVE MAINT INCLUDING PERIODICAL SERVICES AT STN HQ CHOWKIBAL IN THE AREA OF AGE BR-II UNDER GE 874 EWS
2024_MES_645827_1
GE 874/EWS-14/2024-25
Open Tender
Civil Works
Works
180 days
Kupwara
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE 874 EWS
₹30,000
29 Jun 2024
9 Mar 2024
23 Apr 2024
9 Mar 2024
17 Apr 2024
5 Apr 2024
Amount
Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.
M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished fair and even complete all as specified and directed.
M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished fair and even complete all as specified and directed.
M & L preparation of new plastered surfaces and clearcolle for priming to distempering and applying two coats of distemper oil emulsion, white or tinted, complete all as specified.
M & L applying two coats of cement based paint on newly plastered or un plastered wall surface including preparation of surfaces, complete all as specified and directed.
M & L for preparation of old decorated surface of wall including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, plasters etc and applying one coats of white wash complete all as specified and directed.
All as per srl item No. 6 here-in-above but one coat on ceiling surfaces complete all as specified and directed.
All as per srl item No. 6 here -in-above but two coat of white wash on walls.
All as per srl item No. 6 here-in-above but two coat on ceiling surfaces.
M&L for brooming down old decorated surfaces of walls, plastered or un plastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint .If required putty will be measured and paid separately under respective item of BOQ complete all as specified and directed.
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying a uniform layer of 1mm thick wall care putty including preparation of surfaces by rubbing with appropriate size of sand paper and applying two coats of oil bound distemper (approved colour/shed) complete all as specified and directed.
M&L for preparation of old treated surfaces of walls, plastered or un plastered and applying one coat of cement base paint of approved shade/tint. complete all as specified and as directed.
M&L for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces complete all as specified and as directed.
M & L for applying one coat of synthetic enamel paint on old steel surfaces of any description, over 10 cm width or girth including preparation of old steel surfaces complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering.
S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.
All as per srl item No 16 above but except sheeting.
All as per srl item No 16 above but plain sheet as in roof covering /cladding to wall fixed with tapping screws.
Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.
M&L for 2nd class soft wood moulding as in cornices, picture rails and like, not exc. 6 sqcm in section, wrought, fixed with nails complete all as specified and directed.
M&L for 4mm thick Veneered decorative plywood , grade 1 (with BWR resin) with decorative face veneers on one faces; fixed in walls with Nails to timber frame work all complete all as specified and directed.
M&L 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed in ceiling with nails to timber frame work complete all as specified and directed.
M&L for 2nd Class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both side fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of the surface, complete all as specified and directed.
M&L for Applying Melamine polish Ist quality the same matching colour & with two coat of Melamine polish glossy/Mat finish as per required on wooden wall panelling and celling following as under steps. Step -I: Sanding the wooden surface along the grain using the sand paper no 80/120/180 paper. Step-II: surface dent repair with dent Filler with a putty knife over the dented area. Step-III: Apply melamine sealer using spray Machine. Step-IV: Mix Melamine (matt or glossy) base with the catalyst in the specified ratio as per manufacturer instruction add melamine thinner as per instruction then spray using spray gun pressure of 45-55 psi apply two coat of certain interim as per manufacturer instruction complete all as specified and directed.
Material and labour for preparation of new plastered/complete removal of existing surfaces of walls apply distempering 2 or more coat with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed at any height including necessary scaffolding complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
Material and labour waterproof/weather proof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.
Material and labour for one coat of acrylic water based exterior/interior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed at any height including necessary scaffolding complete all as specified and directed.
Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint after complete removal of existing surface/plastered surfaces complete all as specified and directed.
NOTES FOR ITEM NO. 25 To 28:- (a) The work pertaining to smart periodical services shall be executed by authorized applicator through manufacturer of which the materials i.e Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding etc of building shall be included in the quoted rate. (c) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (d) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor.
M/S MOHAMMAD JAMAL WANI
M/S ASMATULLAH SHAH
POPULARHARDWARESTORE
Bidder Name
M/S MOHAMMAD JAMAL WANI
M/S ASMATULLAH SHAH
POPULARHARDWARESTORE
MS SHEIKH NADEEM AKBAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .