PROVN OF ATT TOILET NEAR KSP UNDER AGE (I) NAYA RAIPUR AT NAYA RAIPUR MIL STN

Amount

Surface dressing n exc 15 cm deep and getting out in soft /loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and n.exc 1.5m in depth for foundations, laying of pipe, cable etc in soft/loose soil complete all as specified and directed.

Returning, filling in spreading and levelling and well ramming in layers not exc 25cm including watering for filling under floor complete all as specified and directed.

Removing of excavated material (soils, etc) to distance n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings laid in layers n exc 15 Cm thick spread levelled and rammed including watering etc complete all as specified and directed.

M&L broken brick hardcore of gauge n exc 63 mm deposited, spread and levelled in layers n. Exc 15 cm thick watered and rammed to true surface complete all as specified and directed.

M&L for PCC (1:5:10) type E2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (Nominal mix) Type A1 1:11/2:3 (using 20mm graded stone aggregate)as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, etc and mass concrete complete all as specified and directed.

M&L reinforced cement concrete (Nominal mix) Type A1 1:11/2:3 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L reinforced cement concrete (Nominal mix) Type A1 1:11/2:3 (using 20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L reinforced cement concrete (Nominal mix) Type A1 1:11/2:3 (using 20mm graded stone aggregate) as in slabs supported on walls etc. complete all as specified and directed.

Formwork to Square, rectangular or polygonal rough surface of concrete of sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. .

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, plinth beam etc, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia. complete all as specified and directed.

Ditto - all as per above item No 17 above but 5 mm dia and over upto including 10mm dia as in stirrups, spacers and binder complete all as specified and directed.

M & L brick work with Fly ash Modular bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L damp proof coarses in cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) 40mm thick including necessary form work complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub floor to receive any type of floor finish, tiles etc complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub floor to receive any type of floor finish, tiles etc complete all as specified and directed.

M & L 75 mm thick PCC as in plinth protection and path type C-2 1:3:6 (40 mm graded stone agg) finishing the surfaces even and fair including making of joints at every 2.5 mtr and at corner fillled with mastic filling with bitumens 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.

M&L rendering 10mm thick plaster in CM 1:6 on brick or concrete surfaces finishing the surface even and fair complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick or concrete surface in Cm (1:4) mixed with WPC @ 3% of cement and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L rendering 5 mm thick in CM 1:3 as in ceiling finished surface even and smooth without using extra cement complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but n.exc 0.11sqm in floor etc,over and incl 15 mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match. incl rendering 10mm thick in CM (1:4) and finished rough complete all as specified and directed.

M&L for two coats of oil bound emulsion distemper incl preparation of new plastered surface of wall over and incl a coat of wall care putty minimum 1mm thick averaging complete all as specified and directed.

M&L for three coats of white washing on ceiling including preparation of surfaces complete all as specified and directed.

M & L Preparation of new plastered surfaces of wall and applying two coats of cement base paint over and incl a coat of alkali resistant primer complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

S&F vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified and directed. Make (parryware).

S&F 10 Ltr PVC valveless, syphonic action type flushing cystern low level with inlet, ball valve, float and handle including brackets and PVC out let sutaible for IWC complete all as specified and directed.

S&F for vitreous china wash basin, white flat back size 550x400mm excluding tap but including brackets and waste coupling including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S&F 15 mm fancy/concealed type stop valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.

S&F for 15mm bore, bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F 15 mm stop valve cast copper alloy chromium plated fancy type screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed.

M&L brass chromium plated tubular towel rail 20mm dia D type 600 mm long between flanges fixed complete all as specified and directed.

S&F 45 mm long PVC connection pipe 15mm size with PTMT nuts complete all as specified and directed. .

S & F for Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F shower rose 125 mm brass chromium plated with swivel joints complete and all as specified and directed.

S&F for cp health faucet with 1 meter flexible tube &hook complete all as directed by Engineer-in-Charge.

S & F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm complete all as specified and directed.

S & F Vitreous urinal Half stall type white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

M&L for Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing ,steps cills, sunshades, shelves ,lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good ,cutting not exc. 10 cms girth complete in brick walls complete all as specified and directed.

S&F GI tubing medium grade with all fitting and fixed to wall ,ceiling or laid in floor etc complete of 15 mm bore pipe complete all as specified and directed.

S&F PVC(SWR) 75mm bore pipes single socketed in any length with rubber ring joints fixed to walls/floor all as specified and directed.

Ditto - all as per item No 51 above but 110mm complete all as per specified and directed.

S & F PVC (SWR) bend 110 mm bore complete all as per specified and director.

S & F PVC (SWR) bend 75 mm bore complete all as per specified and director.

Supply and laying double wall corrugated DWC pipe HDPE pipe of outer dia 150mm of approved make ISI marked polythene with smooth internal wall & profiles external surfaces for non pressure for sewage complete all as specified.

Supply and fixed PVC (SWR) vent cowl, 110mm bore complete all as per specified and director.

M&L concrete bed to drain pipe including packing under and haunching against the side and pipe of 150mm bore in cement concrete 1:3:6 type C2 after they laid and tested complete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap(S/P), plain including jointing with solvent cement complete all as specified and directed.

S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall pipe complete all as specified and directed.

S&F 110mm PVC soil waste and vent pipes in any length with or with out ears with cement joints , fixed to wall complete all as specified and directed.

S&F 110 mm bore bends PVC (any radius) with oval access doors ISI marked complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm thick made out of 5mm thick plain colour PVC sheet reinforced with M.S Sqare tube, single side prelam PVC sheet used instead of plain colour PVC sheet edges will be painted to match with prelam sheet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles beading, and joined to gether with solvent cement, suppling and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S & F Anodised aliminium window and ventilators shutters, side hung type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing anodised aliminium snap beading screws anodised aluminium fitting such as peg stays 150mm long(1no)hinges type B-21 100mm long (2no) hinges type B-21 100mm long (2no) suitable handles(1no) complete all as specified and directed.

S&F 100 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and directed.

S&F aluminum handles cast type anodize 150 mm long complete all as specified and directed.

S&F extruded aluminium alloy butt hinges 100mm size type B-21 complete all as specified and directed.

S & F curtain rods of anodised aluminium alloy with fixing brackets, stops, roller etc in repairs complete all as specified and directed.

S&F galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in repairs complete all as specified and directed.

S&F figured glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane thickness of glass 3mm thick complete all as specified and directed.

S&F in MS sliding door bolts 300mm long plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bold plate and two on staple plate and fixed complete all as specified and directed.

M&L for 75mm thick cement concrete type D2 1:4:8 (Using 40mm graded stone aggregate) as a sub base for floor Complete all as specified and directed.

M&L for Sand filling under floors/ paver block or in foundation including watering and consolidation complete all as specified and directed

M&L for coloured machine pressed rubber moulded precast conctete interlocking paver block any shape and any size confirming to IS 15658-2006 of 60mm thickness ,M -40 grade complete all as specified and directed

M&L PCC 1:2:4,type B1,using 20mm graded stone aggregate as in kerbs,mud stops, rounded or chamfered on edges and similer work all as specified and as directed

M&L for Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 sqmm (nominal area), single core, flame retardant low smoke(FRLS), PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked TEC and FIA approved in and including PVC casing & capping and its fittings ISI marked, with mild steel sunken boxes suitable for modular/normal switch/sockets etc with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer internally, incl covered with suitable module cover plate with frame including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper conductor 1.5 sqmm (nominal are) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed for One light/ Fan point controlled by one switch. Make of Cable :- Havells / Polycab / Anchor Make of PVC conduit & conduit accessories - PLAZA / FINOLEX/ KALINGA. Note : (i) Making good to match with the adjoining surface shall be included in the quoted rate. (ii) Rate shall be included for Cutting/chases of wall/floor/ceiling

Ditto all as per above item No 77 above but for One socket out let 5 pin 5 Amp on same board complete all as specified and directed.

S & F modular switch 1 way 6A 1 module complete all as specified and directed.

S & F modular socket 6A 2/3 Pin combined 2 module complete all as specified and directed.

S & F modular White cover plate with frame, 4 module complete all as specified and directed.

S & F modular White cover plate with frame, 6 module complete all as specified and directed.

S & F for ceiling rose 3 phase/PVC/polycarbonated isolated body complete all as specified and directed.

S & F for MCB SPN 32 Amps 240 Volts C Curve 10 KA complete all as specified and directed.

S & F for MCB SP 6-32 Amps 240 Volts C Curve 10 KA complete all as specified and directed.

S & F for MCB DB's 4 Way SPN, 240 volts for mounting MCBs/RCBO's ELCB's etc. as per IS specification of factory made fabricated out of CRCA sheet 1.2 mm thick powder coated fitted with DIN Channel neutral link and 200 Amps rated bus bar.The DB's shall double door type . Inner door fixed on spring loaded hinges with locking arrangement & outer door openable hinged with locking arrangement having IP-43 protection complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

Cutting existing steel tubing for alterations or additions (Each cut measured) done in position without taking down of bore dia 25mm complete all as specified and directed.

S & F 25 mm bore steel water Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S& F for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in 25mm dia GI pipe complete all as specified and directed.

M & L Rotational moulded polyethylene water storage tanks 500 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. Note: Water Tank shall be ISI marked and having min 3 layers.

M & L Earthing complete with galvanised steel earth plate electrode of size 60cm X 60cm X 6mm buried directly in ground (earth pit not less than 2.25 metres deep below the normal ground level) with top edge of the plate not less than 1.5m below normal GL connected to GI earth wire 4 mm dia by means of GI bolts, nuts, check nuts and washers and earth strip protected by 25 mm dia GI pipe medium grade and connected to main distribution board/earthing test point all as shown on electrical plate No.3 of SSR Part I and all as specified including testing on completion.Notes: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix, type B1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh, protection pipe for earth lead upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II and also refer Plate No-03. Earth strip and protection pipe beyond 7.5m shall be measured and paid separately complete all as specified and directed. Note :- Earthing will be redone if desired earth result not found during testing of the same at site.

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded aluminium conductor of size 6 Sqmm 2 core. from walls, poles, trenches all as per directed and specified by Engr-in-charge

M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable complete all as specified and directed.

Supplying and laying unreinforced precast concrete cable cover class LV , type 1, flat size 250 x 150 x 40 mm complete all as per specified and directed.

Supply and laying of light grade galvanised tube 25 mm bore with all fittings and fixed to pole or laid in trenches and road crossings including sealing ends with hession cloth impregnated with bituminous compound in ground and with teak wood bushes for ends complete all as specified and as directed.

M&L brick work with fly ash bricks in one brick thick honey comb walling built in CM 1:4 using fly ash modular bricks straight or curved on plan exc 6m mean radius complete all as per specified and directed.

m/s ramanuj singh and sons (BID ID -3084121)