CONSTRUCTION OF BUILDING FOR ECHS POLYCLINIC AT BASTI UNDER GE (AF) GORAKHPUR

Amount

Lump sum price worked out by the contractor as per showm on drawing for BUILDING WORKS as listed in Sch ‘A’ Part I.

Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY as listed in Sch 'A' Part II.

Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATION as listed in Sch 'A' Part III.

Lump sum price worked out by the contractor for SEWAGE DISPOSAL as listed in Sch 'A' Part IV.

Lump sum price worked out by the contractor for ROAD / PATH / CULVERT as listed in Sch 'A' Part V.

Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Sch 'A' Part VI.

Lump sum price worked out by the contractor for COMPOUND WALL AND GATE as listed in Sch 'A' Part VII.

Lump sum price worked out by the contractor for EXTERNAL ELECTRIC SUPPLY as listed in Sch 'A' Part VIII.

Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY as listed in Sch 'A' Part IX.

Lump sum price worked out by the contractor for FIRE ALARM SYSTEM as listed in Sch 'A' Part X.

Lump sum price worked out by the contractor for EARTHWORK AND SITE CLEARANCE as listed in Sch 'A' Part XI.

Price item wise worked out by the Contractor for Schedule `A' Part-XII (rate against Srl No. 12.0 to 47.00 shall be quoted by the Contractor)

Supply earth from outside MoD land forming embankments including raising (or lowering) earth, spreading in layers not exc 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc not exc 1.5 m high from base complete all as specified and directed.

S&F white modular cover plate with frame 12 module complete all as specified and directed.

S&F metal flush box 12 module complete all as specified and directed.

S&F metal flush box 8 module complete all as specified and directed.

S&F factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F MCCB, 4 pole, 125 Amps, 25KA current rating with adjustable thermal and magnetic setting conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

Supply and fixing modular type PVC enclosure with a two pin and earth plug and socket 16 Amps complete with one single pole MCB 20/25 Amps capacity complete all as scpeified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

Drilling and reaming to suitable dia for vertical bore at approved site/location in any type of strata for VC casing borewell pipe of nominal dia 150mm bore including all for various depth & all works pertaining to boring complete in all respect as specified and directed. Note: - The rate quoted quoted by contractor will be deem to be included for transportation & erection of Rigmachine and all T&P required at site for drilling & reaming etc. at site and no extra cost will be paid.

Supply and assembly including jointing and fixing in position UPVC borewell casing pipe 100 mm bore (nominal dia), minimum 5mm thick of pressure 10 Kg/Sqcm, conforming to IS:12818 including all fittings & accessories as pipe jointed with EPDM 'O' ring and suitably locked both side etc. complete all as specified and directed. Note: - Length of each pipe is 3.0 meter.

Supply and assembly including jointing and fixing in position UPVC slotted casing pipe 100 mm bore (nominal dia), minimum 5mm thick of pressure 10 Kg/Sqcm, conforming to IS:12818 including all fittings & accessories as pipe jointed with EPDM 'O' ring and suitably locked both side etc. complete all as specified and directed. Note: - Length of each pipe is 3.0 meter.

Supply and assembly including jointing, lowering and fixing in position MS pipe submerssible column pipe 50 mm bore plain with coupler (nominal dia) minimun 5mm thick of (heavy duty), conforming to IS:12818 including all fitting accessories such as stanless steel pump guard rubber ring, pipe jointed with EPDM 'O' ring and suitably locked both side complete all as specified and directed. Note: - Length of each pipe is 3.0 meter.

S&F UPVC bottom cap suitable for 100 mm (nominal dia) UPVC bore casing pipe complete all as specified and directed.

Supply and assembly including jointing and fixing in position pump guard set SS-304, bottom adaptor with flange PVC,, short piece, minimum 20mm SS rod (02 Nos) including nuts, bolts and washers and all other suitable for fixing submerssible pump, complete all as specified and directed.

S&F submerssible copper cable 6 Sqmm, 2 Core tied with external wall with SS winding with 4mm dia complete all as specified and directed.

Supply & assembly MS discharge coupler bend 100mm dia complete all as specified and directed.

S&F well cap for 150mm dia casing pipe complete all as specified and directed.

S&F MS flat iron housing clamp (02 Nos) of size 75mm x 15mm for holding 150mm dia casing pipe with 12mm MS nuts, bolts & washers including casting of PCC block 1:2:4 type B-1 (using 20mm graded stone aggregate) of size 600mm x 600mm including 50mm dia MS pipe 02 Nos each 1.50 meter alongwith cap plug and cap top for filling pea gravel including necessary excavation in any type of soil complete all as specified and directed.

Supply and lowering of Peagravel of 2 to 4 mm size complete all as specified and directed.

M&L for development of tube well by means of over pumping high velocity fitting with 600PSI air compressor all as specified in IS 8110-2000, Para 4.3 including arrangement for equipment fitting and supply of sodium hepta sulphate 60 kg for yield test complete all as specified and directed.

Chemical, biological and potability testing of water sample taken from the bore at govt / NABL approved laboratory complete all as specified and directed.

S&F submersible pump with motor, single phase, suitable to operate at 180-240 volt, copper wound, IP -68 suitable RPM, 1.0 HP vertical type, motor body of stainless steel, impellor of impellor of high quality resistant material, CI delivery casing stainless steel shaft with suitable capacity motor with provision control panel having DOL starter, power rating 1.0 KW in built suitable thermal over load protection complete in sheet metal enclosure complete all as specified and directed.

S&F MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed.

S&F MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as specified and directed.

S&F MCB, single pole, 240 Volts, curve 'C' of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.

Material and labour for earthing complete with galvanized iron earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron strip 32x6mm, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1:3:6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1:2:4 type B1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed by. Note: Earth lead wire and its protection pipe upto and including 15 mtr only from the top of earth electrode are included under this item and additional earth strip/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

-do- all as above item No 39.00 but using 4mm dia GI wire as earthing lead complete all as specified and directed.

Boring of holes under road, pavement, hard standing manually including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed.

Supplying and fixing in position new SMC (Sheet Moulding Compound) Junction boxes of size 280mm x 170mm x 130 mm depth. The box shall provided with and including 4 Nos, 100 Amps aluminum bus bar mounted on porcelain insulators including one no. MCB SP 230 volts 6 Amps and connecting the bus bars to cables with using suitable GI nut, bolts and washers and aluminum lugs etc. fixed on pole using 30 x 5 mm FI clamps, nuts, bolts & washers complete all as specified and directed.

Supplying and fixing brackets made out of 32/40mm dia light grade GI pipe 0.75 mtr long bent to shape and size fixed on location using new clamps made to shape incl nuts,bolts & washers complete all as specified and directed.

S&F 2.5 sqmm three core PVC insulated, unsheathed multistranded copper conductor cable 1100 Volt grade draw from junction box to street light fitting complete all as specified and as directed.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm ,2 core, 1100 Volts grade complete all as specified and directed.

S&F Stove enamelled, blak, rigid steel conduit, welded 25 mm dia including all fitting accessories on surface or cable tray etc. complete all as specified and directed.

S&F strata sample box (for keeping at least 75 samples) made out of board and 12mm thick ply wood with 25mm x 25mm aluminium angle 2mm thick beareer overall size 1200mm x 750mm x 300mm with front glass sheet sliding type cover with aluminium frame all around 2 Nos key holes plate of size 40mm x 25mm and 3mm thick complete showing name of tubewell, location and strata sample with depth complete all as specififed and directed.

Comfort AC and Refg. Engineers (BID ID -3159844)