REPAIR/ REPLACEMENT OF LED SECURITY LIGHTS, PERIMETER LIGHTS, STREET LIGHTS FITTING, GARDEN LIGHTS, POST TOP LANTERNS AND ALLIED WORKS AT VARIOUS LOCATION AT DOMESTIC AREA AND AFH UNDER GE (AF) JORHAT.

Amount

Taking down unserviceable street / perimeter / garden / security roadway / mast Light fittings from pole / structure for repair / checking and identifying of faulty wirings, cleaning of fittings, cover, etc. and re-assembling the same after repair, testing and refixing in original position and reconnecting with the electrical line complete all as specified and directed. NOTE:-Replacement of spare parts shall be measured and paid separately under relevent items here in after.

Supply only electronic driver of 25 Watt LED security light fitting complete all as specified and directed.

Supply only electronic driver of 30 Watt LED security light fitting complete all as specified and directed.

Supply only electronic driver of 45/60 Watt LED security light fitting complete all as specified and directed.

Supply only electronic driver of 70/90 Watt LED security light fitting complete all as specified and directed.

Supply only electronic driver of 75 Watt LED security light fitting complete all as specified and directed.

Supply only post top light (garden light) top cover suitable for existing light fittings including screws, nuts and bolts etc complete all as specified and directed.

Supply only 12W LED bulb pin type complete all as specified and directed.

Supply only lamp holder, PVC / Polycarbonate type with cord grip cap suitable for pendant fitting complete all as specified and directed.

S&F 60 Watt LED light fitting with pressure die cast aluminium housing with toughened glass, IP66 in order to ensure better performance of the luminaires including clamp, nut, bolt and other accessories for fixing, including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make: Crompton, Cat part No. LST-60-CDL-M or its equivalent model in Philips / GE as approved by GE

S&F 70 Watt LED light fitting with pressure die cast aluminium housing with toughened glass, IP66 in order to ensure better performance of the luminaires including clamp, nut, bolt and other accessories for fixing, including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make:Crompton Cat part No. LST-70-CDL-M or its equivalent model in Philips / GE as approved by GE

S&F 90 Watt LED light fitting with pressure die cast aluminium housing with toughened glass, IP66 in order to ensure better performance of the luminaires including clamp, nut, bolt and other accessories for fixing, including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make:Crompton Cat part No. CRP-404-90-75-SL-GL-NSG or its equivalent model in Philips / GE as approved by GE

S&F 300 Watt LED Flood light fitting with pressure die cast aluminium housing with toughened glass, IP66 in order to ensure better performance of the luminaires including clamp, nut, bolt and other accessories for fixing including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make:Crompton Cat part No. CFL-501-300-57-60D-SL-GL-NGG or its equivalent model in Philips / GE as approved by GE

S&F 200 Watt LED Flood light fitting with pressure die cast aluminium housing with toughened glass, IP66 in order to ensure better performance of the luminaires including clamp, nut, bolt and other accessories for fixing, including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make:Crompton Cat part No. CFS-501-200-57-60D-SL-GL-NGG or its equivalent model in Philips / GE as approved by GE

S&F 150 Watt LED Flood light fitting with pressure die cast aluminium housing with toughened glass, IP66 in order to ensure better performance of the luminaires including clamp, nut, bolt and other accessories for fixing, including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make: Crompton Cat part No. CSF-501-150-57-60D-SL-GL-NGG or its equivalent model in Philips / GE as approved by GE

S&F 120 Watt LED Flood light fitting with pressure die cast aluminium housing with toughened glass, IP66 in order to ensure better performance of the luminaires including clamp, nut, bolt and other accessories for fixing including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make:Crompton Cat part No. TFS-504-120-57-60D-SL-GL-NSG or its equivalent model in Philips / GE as approved by GE

S&F 100 watt high efficiency round highbay light luminaire with high pressure die cast housing acting as heat sink in order to ensure better performance of the luminaires IP66 including clamp, nut, bolt and other accessories for fixing including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make : Crompton Cat part No. LHB11-100-CDL / 60-HPM or its equivalent model in Philips / GE as approved by GE

S&F 30 Watt LED light fitting with pressure die cast aluminium housing with toughened glass, IP66 in order to ensure better performance of the luminaires including clamp, nut, bolt and other accessories for fixing, including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make:Crompton Cat part No. LSTS-30-CDL-M or its equivalent model in Philips / GE as approved by GE

S&F 45 Watt LED light fitting with pressure die cast aluminium housing with toughened glass, IP66 in order to ensure better performance of the luminaires including clamp, nut, bolt and other accessories for fixing, including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make: Crompton Cat part No. TRP-409-45-57-SL-NS-GL-NSG or its equivalent model in Philips / GE as approved by GE

S&F 20 watt LED post top with moon light effect and efficient light distribution and IP65 protection with impact and corrosion resistant with driver and lamp including disconnecting / taking down existing old unserviceable post top light fittings complete all as specified and directed. Make:Crompton (Cat No- LPTH-20-CDL) or equivalent model in Philips/GE as approved by GE

S&F LED aviation light luminaires comprising of aluminium housing with polycarbonate encloser with 302 Nos LED including cable for connection after taking down old unserviceable light fittings, complete all as specified and directed. Make: Bajaj Cat part No. BGAV302 LED or its equivalent model in Philips / CG as approved by GE

M&L for 5 to 10 mm dia of neck mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S&F cable junction box 200X160X98mm in size, made out of thermoplastic, having IP 65 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 Nos polymide gland with check nut (M-32 -02 No & M-25 -01 No) fixed on poles with aluminium clamps of size 25x3mm, nuts, bolts, washers etc. including taking out of old unserviceable cable junction box complete all as specified and directed. Make :- Hensel Cat No. K-9250 or its equivalent model in Spelsberg / Sintex as approved by GE

M&L for in repairs PVC insulated three core 2.5 sqmm multistrand aluminium conductor for connection of security light from junction box to security light, complete all as specified and directed.

M&L for painting of steel tubular trident pole of 2.5 to 5 metre long with two coats of synthetic enamel paint including numbering of pole No. by stensils after cleaning the surface of pole by rubbing with emery paper to remove rust, dust etc complete all as specified and directed.

M&L for painting to steel tubular pole 8.5 to 11 metre long with two coats of synthetic enamel paint up to 1.50 metre height from ground level in 30 cm alternative black and yellow strips and remaining portion with aluminium paint including numbering of pole No. by stensils and MS frames like channel,clamps, angle, D-clamps etc with two coats of aluminium paint complete all as specified and directed.

Taking down / out unserviceable or serviceable UG cables of any cross sectional area and connections including bricks, etc. of any descriptions, laid in trenches and /or fixing with walls /poles including segregating of serviceable materials viz bricks, cables, etc. and kept in Safe custody for re-use, complete all as specified and directed. (NOTE : Earth Work shall be measured and paid separately under relevant Items here-in-after)

Excavation in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, including taking out and laying of cables, brick etc. and getting out as in soft / loose soil, complete all as specified and directed.

Returning, filling in, including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 cm thick in Soft/Loose Soil, complete all as specified and directed.

Removing excavated materials (Soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the Starting Point. complete all as specified and directed.

M&L for Sand Cushioning (dry) in trenches for protection of UG Cables (below, above and around the UG Cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and directed. (NOTE : For the purpose of payment, punning thickness of Sand cushioning shall only be measured).

S&F Sub-Class 'B' brick, well burnt, laid breadth-wise along the length of Cable laid in trenches over sand cushion laid for UG Cable protection, complete all as specified and directed.

Re-laying only old brick in trenches for under ground Cable Protection (Serviceable Bricks obtained from Item here-in-before), complete all as specified and directed.

M & L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 25 sqmm 4 core, complete all as specified and directed.

M & L for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 10 sqmm 4 core, complete all as specified and directed.

Taking down / out unserviceable GI / HDPE Pipes of any descriptions, laid in trenches and /or fixing to wall / poles, complete all as specified and directed.

S&F 40 mm bore High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc. complete all as specified and directed .

S&F galvanised Iron Pipe 40 mm Bore (dia) ‘Light grade’ for protection of UG Cable, laid in floors/ road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc, complete all as specified and directed.

Labour only for horizontal boring for passing protection pipe up to 80mm bore under road / foot path not exc. 10.00 mtr in a single length, complete all as specified and directed. Note : Pipe to be measured separately.

M&L for Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping for pole including use and waste of formwork including taking down old unserviceable / broken PCC complete all as specified and directed.

S & F in repairs 3 pole power contactor 40 Amps 415 volts 3 phase AC-3 rating with 220-240 volts AC coil complete all as specified and directed.

S & F in repairs 3 pole power contactor 32 Amps 415 volts 3 phase AC-3 rating with 220-240 volts AC coil complete all as specified and directed.

S & F in repairs astronomical time switch suitable for 32 Amps capacity at 240 volts 50Hz supply including all necessary connections complete all as specified and directed. Make: Legrand (Cat No-412657) or equivalent model in Indo-Asian/ as approved by GE

M&L for straight through cable Joint Kit including Jointing Materials for making Joints of UG Electric Cable 1100 Volt grade heavy duty with PVC/XLPE insulated aluminium stranded conductor, nominal cross-sectional area 10 Sqmm to 16 Sqmm, 4 Core and testing, complete all as specified and directed.

S & F in repairs polycarbonate unbreakable white globe doom of 8 inch dia in existing garden light pole complete all as specified and directed.

S & F 7W LED bulb B-22 type complete all as specified and directed.

S&F On pole street light bracket fabricated out of 1.0 mtr long 40mm dia GI tubing (light grade) with 40 mm bore bent to the shape as directed complete with mounting MS clamp of flat iron size 25x5 mm of suitable length 02 pairs including nut bolts etc of suitable size and painting to MS clamp with two coats of aluminium paints over a coat of red oxide metal primer complete all as specified and directed.

S&F in repair 4 sq mm, 3 core PVC insulated stranded aluminium conductor cable, 1100 volts grade heavy duty passing through steel tubular pole or for service connection complete all as specified and directed. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S KESHAVECONSTRUCTIONS

KAY CEE CO. INDIA

M D Constructions Co

HEMONTA DAS

M/S Praduman Kumar Sharma

Bidder Name

KAY CEE CO. INDIA

HEMONTA DAS

M/S DB TRADING CO

M/S KESHAVECONSTRUCTIONS

M D Constructions Co

M/S Praduman Kumar Sharma