Drilling of Borewell and Erection of existing submersible motor and Starter at Anna Street in ward no 21 at Ponneri Municipality

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: Ponneri Municipality

Name of Work: Drilling of Borewell and Erection of existing submersible motor and Starter at Anna Street in ward no.21 at Ponneri Municipality

Contract No: 864/2024/E1 ( General Fund 2025-26 ) Estimate Amount : Rs.3.00 Lakhs

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Towards cost of Geophysical investigation survey charges. 1 1No ( One Number) 0 Excess(+) Full Conversion INR

2 Supply and delivery of 200mm dia of PVC casing plain pipe including cost and conveyance at site etc., complete as per standard specification ` 12 1M ( One Metre ) 0 Excess(+) Full Conversion INR

3 Supply and delivery of 200mm dia of PVC casing Slotted pipe ( Company Slots) including cost and conveyance at site etc., complete as per standard specification ISI make 30 1M ( One Metre ) 0 Excess(+) Full Conversion INR

4 Drilling of Borewells anywhere in Tamilnadu including ransportation from one place to another with inTamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site (Site will be shown by the Departmental Officers) including construction of mud pit. Drilling 150mm dia pilot bore to the required depth Below ground level. 42 1M ( One Metre ) 0 Excess(+) Full Conversion INR

5 Supply and delivery of 200mm dia(8”) PVC end cap including cost and conveyance etc., complete 1 1No ( One Number) 0 Excess(+) Full Conversion INR

6 Reaming from 150mm dia pilot bore to 300mm dia size bore as directed by the Departmental Officer, to the required depth up to 60 from Ground level 42 1M ( One Metre ) 0 Excess(+) Full Conversion INR

7 Labor charges for inserting the P.V.C. casing pipes assembly with slots (or) without slots in the drilled holes including joining the pipes etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Municipal Engineer excluding cost of casing pipe etc., complete 200mm dia PVC casing pipe 42 1M ( One Metre ) 0 Excess(+) Full Conversion INR

8 Charges for developing the bore wells with Air Compressor 600cfm (Minimum 8 hours) including transportation labor and fuel charges for Compressor as directed by the Departmental Officer and conducting yield test by “V” notch method. 8 1Hr ( One Hour ) 0 Excess(+) Full Conversion INR

9 Supply and Delivery of 4.0 Sqmm PVC insulated and Sheathed 3 Core flat type copper cable confirming to IS 694/1990 Including all charges with excise duty and handling charges etc 50 1M ( One Metre ) 0 Excess(+) Full Conversion INR

10 Towards Labour Charges for the errection of Submersible pump set in bore well including fixing and jointing submersible cable with proper clamps up to the starter to riser pipes to the required depth valves erection clamps, pressure gauge up to the exterior of panel board consisting of TPICN switches starter ,Volt meter, Ammeter, three pilot (indicating) Lamps capacitor single Phasing preventor,water level guard and laying and jointing the cables and twin earthing as per IE rules etc., Complete and testing the pump set and trail run for 10 days 2 HP Plat form All round 1 1No ( One Number) 0 Excess(+) Full Conversion INR

11 Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 50mm dia Pipe clamp set 2 1No ( One Number) 0 Excess(+) Full Conversion INR

12 Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 50mm G.I Elbow 2 1No ( One Number) 0 Excess(+) Full Conversion INR

13 Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 50mm G.I Union 1 1No ( One Number) 0 Excess(+) Full Conversion INR

14 Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 50mm dia Non Return valve 1 1No ( One Number) 0 Excess(+) Full Conversion INR

15 Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete 50mm Dia UPVC Pipe Column pipe 30 1M ( One Metre ) 0 Excess(+) Full Conversion INR

16 Supply, delivery and fixing of the following ISI make water supply materials including all labour charges etc., complete Nylon rope 34 1M ( One Metre ) 0 Excess(+) Full Conversion INR

17 Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., 1 1No ( One Number) 0 Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words